After installing a new printer how to print a test page Windows 7?

Similar Questions

• trying to install my new printer wireless, keep saying window installation service could not be accessed.

  trying to install my new printer wireless, keep saying

  Window installation service could not be accessed. This can occur if you are running windows in safe mode or if windows install is not properly installed.contact your support for assistance staff.
  I'm not running in safe mode...

  Thank you so much, I used the fix it guy and it fixes the problem, I was able to install the printer wireless without problem...

• HP LaserJet P2035n: HP 2035n ceases to printing/answer after installing the new toner

  Hi, I work for a School District, we have several of these printers and recently had this problem on 2 machines. Problem is that the printer is completely insensitive after installing a new toner real HP 05a.

  Install toner turn printer on, it passes through the light initialization sequence and shows ready, will not print a test page for the PC, will not print a page of the control panel of the printer configuration, will not be recognized through its USB connection (PC gives same message the USB is damaged or defective), does not pick up an IP address and is not accessible via the Web console.

  Turn the printer off and reinstall the old toner put under tension and everything works again, USB is recognized and system installs the drivers, accessible via the Web console, prints the config to the PC and the control panel of the printer. I have 3 used toners and all three will work with both printers, I have 2 new toners and the two do not work in the printer. Thanks for playing.

  I saw a few client computers and forums on other sites about this issue defective chips on the cartridges-back them and replacements should be good.

• I am trying to install a new printer. I get an error code 80072EFD of # when I try to download the software. How can I fix it?

  I am trying to install a new printer.  I get an error code 80072EFD of # when I try to download the software.  How can I fix it?

  See if this article is of no help:

  "You may experience some temporary connection errors when you use Windows Update or Microsoft Update to install updates"
    <>http://support.Microsoft.com/kb/836941 >

  HTH,
  JW

• Color print from my hp printer deskjet 5550 after installing a new iMac computer

  I try to print in color from my printer hp deskjet 5550 after installing a new iMac computer.  Do I need a printer driver for Mac, and where can I find the printer driver?  Operating system is OS X Lion mountain.

  Any help would be appreciated.

  Hello

  The HP Deskjet 5550 is not compatible with Mountain Lion and, therefore, the question appears:

  http://support.HP.com/us-en/document/c01856359

  Try the 3rd party HPIJS print drivers that seems to support your printer. don't forget to install one of the 3 downloads required below:

  http://www.linuxfoundation.org/collaborate/workgroups/OpenPrinting/macosxhpijs#Downloads_Required

  Now add the printer in Print & Scan by clicking on the menu drop-down use, and then click Select printer software.

  Select the driver HP Deskjet 5550 HPIJS in the list and add the printer.

  Shlomi

• OfficeJet 4500 said Offin printer after I installed the new print cartridge

  Don't use Windows 7 but no window 8.   Just installed a new print cartridge and now it says the printer is offline.

  Glad to hear everything is working very well for you. If you encounter other problems, feel free to ask.

• My drives E and F have suddenly disappeared. I can't play my CD to install my new printer

  I searched with almost all programs which said it corrects your drivers, but they do not fix readers for the CD-DVD-R-W. These 2 drives have suddenly stopped working. I can't install my new printer... I have HP which is the computer that I and WindowsXP and still have no results.

  Hi PollyHarris,

  1. did you of recent changes on the computer?

  2. you have any third-party DVD burning software installed on the computer?

  3. you receive an error message when you insert a DVD in the player?

  See the link below and run them the fixit tool available, check if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  If the previous step fails, then check in Device Manager for the status of the disk on the computer and after return details.

  How to solve the problems of hardware with Device Manager

  http://www.Microsoft.com/windowsxp/using/Setup/learnmore/devicemgr.mspx

• I can't access internet wirelessly from my laptop because I installed a new printer which is now connected to my router, is - it related somehow?

  I can't access internet wirelessly from my laptop because I installed a new printer which is now connected to my router, is - it related somehow?

  Hello

  1. what happens when you use a wired connection?

  2. how many devices are connected to the router?

  This can happen if you connect that a specific number of device to the router, and when it exceeds the limit. You can consult the router's manual or contact the manufacturer of the router to check if all the parameters must be changed to connect several devices.

   

  Hope this information is useful.

• I am trying to install a new printer, but I get "due to an unidentified problem, Windows cannot display Windows Firewall settings? Can anyone help?

  I am trying to install a new printer, and to do that I know I have to disable firewall settings. I try, but I get "due to an unidentified problem, Windows cannot display Windows Firewall settings? Can anyone help?

  I tried to go into Windows and change the settings of the firewall, but I get the same message.

  I also tried to run an update of the Windows security updates, but same message.

  I use Windows XP Professional Service Pack 3

  Any help would be greatly appreciated?

  Thank you

  M

  HI Maria/Winston.Not, trying to be coy but. I've never had close the firewall to load anything. It will be, or at least should invite you to make a choice to leave the program to run or not? Nevertheless.If you have windows activation hurt you firewall can reactivate manually without going through the bugs that you can not. If you click Start and choose the runtime application. Type cmd, and then press ENTER. When the command prompt box appears type "netsh winsock reset" without the quotes. He'll say firewall reactivated and ask for a reboot. Restart the computer and it will be active again. Just trying to help.

  Hi Winston/Hewlit,

  Thank you both for your advice.
  While waiting for your answers, I pushed all sorts of buttons and downloaded all kinds of programs in the hope that I could break the firewall (Hewlit the printer I tried to install says to disable the firewall to install the printer, and then turn it back on?).
  After a reboot, the message 'corrupt windows\system32 etc' file came and asked me to put in the original disc of Windows XP, I did not.
  Cut a long story short, I have now booked for a technician to come out as I'm totally lost.
  Thanks again for your help,
  M

• Print Spooler service is not running and cannot install a new printer

  My print spooler service is not running and the computer will not let me install a new printer. How can I fix it?

  Hi John,.

  What is the number and the model of your printer?

  You can try running the fixit of the printer and check.

  Diagnose and automatically fix problems printing and printer

  You can also consult the following articles and check.

  Printer in Windows problems

  Resources for the resolution of the printer in Windows XP problems

• trying to install a new printer kodak esp 3.2, error 643

  Original title: error 643.

  trying to install a new printer kodak esp 3.2

  Troubleshoot network printer:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  You can place the computer in a clean boot and installation of the printer driver.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important:-do not forget to put the computer to a normal startup by following step 7 in the link above.

  You can also read the following article to download Kodak printer drivers.

  Kodak printer drivers

• How to recharge my hard drive with photos that are stored in iCloud.  After installing a new hard drive, there's no pictures found in the Photos, and I get this error "cannot find system Photo library named"Library.photoslibrary Photos".

  How to recharge my hard drive with photos that are stored in iCloud?  After installing a new hard drive, there's no pictures found in the Photos, and I get this error, "could not find the picture of system library named"Library.photoslibrary Photos".

  Soon as your App Photos or iPhoto lost track of your photo library, or there has not been migrated from your old drive. You can create an empty library and probably enable iCloud photo library for photos to upload to the cloud.

  Designate a library in pictures - Apple Support System

  

• Once you install a new printer firmware for your printer, is it possible to return to the earlier version of the firmware of the printer in case an error occurs?

  Once you install a new printer firmware for your printer, is it possible to return to the earlier version of the firmware of the printer in case an error occurs?

  It may be an option, as long as the error prevents you to connect to the machine. Even so, some firmware update software will not allow a downgrade. This is something that you should go to the manufacturer of the printer for more information.

• How to restore the operating system after installing the new hard drive?

  After installing a new hard drive to replace a disc that fails, can you install windows 7 and the other necessary "tricks" to re-setup and driver discs Dell came with the computer? or you buy a new copy of windows 7?

  See the Dell system software installation

  I can find the most recent versions are:

  Windows XP x 86 http://ftp.dell.com/utility/Dell_System-Software_A06_R288017.exe

  Windows XP x 64 http://ftp.dell.com/utility/Dell_System-Software_A07_R288023.exe

  Windows Vista x 86 http://ftp.dell.com/FOLDER31331M/1/DSS_UTIL_WIN_R282536.EXE

  Windows Vista x 64 http://ftp.dell.com/FOLDER88660M/8/Dell_System-Software_A06_R282537.exe

  Windows 7 x 86 http://ftp.dell.com/FOLDER88692M/9/Dell_System-Software_A03_R282539.exe

  Windows 7 x 64 http://ftp.dell.com/FOLDER88677M/8/Dell_System-Software_A03_R282538.exe

• How can I keep my HP1510 all-in-one to print the test pages as much?

  How can I keep my HP1510 all-in-one to print the test pages as much? My printer is connected to my laptop, and it seems that whenever I disconnect, want the printer print a test page when I reboot. I don't know where the option is to disable this option.

  Pages are likely alignment pages.  When a new cartrdige is installed the printer will print an alignment page which should be placed on the scanner glass and press the button of scan to complete the alignment process.  If the alignment is not complete it will repeat when the printer is powered suite or maybe at the end of print jobs.

  The alignment page will stop printing when the alignment process is complete.  See the page here for more information.