After the hard drive failed, I changed my computer and reinstalled LR5. I've updated LR5 a few weeks before my computer crashed, so for you my serial number is up-to-date. After having read a few tutorials, I suspect this deactivation were not made before

Similar Questions

• Question about reinstalling windows on a laptop that came with it, but the hard drive failed and had to be replaced.

  OK, until recently, the hard drive of my laptop couldn't, and I had to replace, no biggie, I really care about this laptop in any case. Then I threw ubuntu top and let it go from there. But recently, I wonder, if I could get windows again for her, for free. I am sure that it is not under warranty, but I could go and check of 90 percent. I have no back ups for it because it was cheap.

  Additional information:

  HP Pavilion G6-2235us

  Bought in the United States

  Provided with Windows 8

  No backups.

  Yes, if the hard drive has been installed you can just catch a Windows ISO-8 8.1 is not available now and make an own Install.Then, if you have the sticker of the product key on the back of your laptop use the product key to activate. Devices with Windows 8 generally have incorporated in their BIOS product key and use the following tool to get the product key:

  Download the key tool produces OEM of Windows

  Then, you can use the key to activate. In the meantime, here is the link to download windows ISO 8.1 and generate the installation media

  http://www.eightforums.com/tutorials/18309-Windows-8-Windows-8-1-ISO-download-create.html

  Later you can improve Windows 10 too if you wish.

  Let us know if you have any other questions.

• After replacing the hard drive failed to load Windows Vista due to CD drive problem

  Original title: new hard drive

  My hp pavilion dv6700 crashed to its hard drive. I put a new and need to load the operating system vista on it. The cd-rom does not work. I have an external cd drive. What should I do?

  Hello

  «I use the three recovery DVDs I've done everything first, when I bought the laptop Pavilion dv6904ca /HP /.»  And I suspect that they are not good for some reason any. Even if I did so that I have them stored in a safe and proper manner, they were probably unnecessary since the beginning. »

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• HP Envy M4: Just changed the HARD drive (failed) and replaced with SDDS, having problems loading OS System.

  SO as I said, my HARD drive wasn't so I went and replaced by a DDI, I did not have any recovery disk or anything, because I didn't need anything off the old HARD drive (I had an external which had all my videos and photos) now my only question is how can I load my old windows 8 OS and then upgrade to windows 10.

  any advice or assistance would be greatly appreciated.

  Thank you

  Alex

  Hello

  Please follow the instructions below:

  http://support.HP.com/us-en/document/bph07143

  Kind regards.

• Win7 won't start no-Pavilion dv7-6059eo-a the hard drive failed? Contact HP?

  Hello

  I have already experienced some minor problems with my HP laptop, as crashes and freezes and error startup. Now, yesterday I came home vacation and discovered that my PC did "feel well" when I used it. Sound had been delayed and delayed, processes and programs froze frequently, including the Task Manager. I decided to just restart and went for a shower, half an hour later when I came back to my PC it was trying to close the session, without success. I used the power button to shut down physically, and when I tried to start it up, I was allowed to choose whether to start the PC normally or in "safe mode", as expected. I started normally and it has frozen on the 'Starting Windows' screen, the animation wouldn't even start.

  I waited several minutes for Windows to start and, eventually, windows cursor appeared on the screen, but it was obviously the wrong resolution (much bigger (and wider than what is proportional) and fuzzier than normal), then I got a blue background (However, this was not blue, it was like a wallpaper) and the come command prompt thingy indicating exactly what :

  Microsoft Windows Script Host Version 5.8

  Copyright Microsoft Corporation. All rights reserved.

  REM model:

  Legend of the REM: Hitachi HTS725050A9A364 ATA Device

  REM DeviceID: \\.\PHYSICALDRIVE0

  REM SCSIBus: 0

  REM SCSIPort: 0

  Scores of REM: 4

  REM PNPDeviceID: IDE\DISKHITACHI_HTS725050A9A364___PC40CH0A\5 & DDFF 3299 & 0 & 0. 0.0

  REM

  REM

  REM [RESULT]

  REM couldn't Scout because could not detect 2 hard drives on this system

  C:\System.sav\util\MBRINST. / Ini EXE C:\System .sav\util\MBR. INI/U/Q

  ECHO MBRInst returned %ERRORLEVEL% > C:\system.sav\logs\MBRINST. JOURNAL

  I leave the PC for half an hour, and when nothing happened, except at the prompt closing itself, I rebooted, it the same way as last time. This time when start I had to choose between 'start Windows normally' and 'Start Startup Repair (recommended) '. I chose the option recommended and expected (because I used to get these before the crash too). But ultimately the same black screen and the enormous-too-big-cursor appeared, then he went blue and then the command line came, stating the same message as I wrote above.

  It is, essentially, as far as I got with the PC after the evening of yesterday and today. I also noticed wave, repetative sounds coming from inside the PC, looks like a frog, very very small is trapped inside. I tried the F8 menu at startup and chose to start in "safe mode" but there is no difference.

  I would be totally grateful for help, because it was a ~ $1400 spent and I got it for a few months...

  Thank you for reading

  My

  Hello

  Error 303 would indicate a hard drive failure - this is also compatible with the freezing issues you describe leading up to this event.

  Your best option isto contact HP and arrange for the hard drive replaced under warranty.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

  

• Portege M200 - the hard drive failed

  My 60 GB Toshiba hard drive failed in my Portege M200.

  I tried mounting a hard drive, I had in my old laptop, a 30 GB Hitachi hard drive but the laptop doesn't seem to recognize it. Does need a Toshiba hard drive or is the laptop died, when I put the hard drive in I get message invalid startup disk.

  The old hard drive goes to a blue screen then restart the laptop.

  No there not Toshiba HDD only. I found the list of some compatible hard drives for this old Portege.
  You can use follow hard drives:
  -TOSHIBA HDD2193B
  -TOSHIBA HDD2171B
  -TOSHIBA HDD2184B
  -TOSHIBA HDD2194B
  -HITACHI G8BC00014410
  -HITACHI G8BC00014610
  -HITACHI G8BC00015610
  -HITACHI G8BC00014810

  Anyway, when you try to use new BIOS to check updated HARD drive and if default settings the new HARD drive will be recognized correctly in the BIOS settings.

  Old HARD drive is recognized correctly in the BIOS settings?
  Have you tried to install the OS by using old HDD?

• I changed the hard drive of a 4440 probook s and I can not configure the fingerprint reader

  Hi, I have a probook 4440 s, I changed the hard drive due to malfunction, I used paintings General; I can't set the finger print recognition

  Hi Rubio7,

  Welcome to the HP forum!

  Your Probook is a commercial unit and the consumer forum.

  I'm sorry, but to get your question more exposure, I suggest posting in the trade forums, since it is a commercial product. You can do the Forum Commercial/Notebook - HP ProBook, EliteBook, Compaq, slate/Tablet PC, Armada, LTE

  I hope this helps.

• (Redirected) Cannot boot from the HARD drive on dell n5010 with SSD and HARD drive installed

  I have my old dell n5010 (15R Inspiron) with SSD (Samsung EVO 840 120 G) installed on the main drive Bay and the HDD (Samsung HJJ 500 G) on the optical drive Bay.

  It is a typical way to add an SSD on such an old laptop (bought from dell.com.cn in 2011).

  My Windows 10 operating system has been installed on the SSD using Samsung Data Migration software, so the previous C drive was pointless. So I formatted and installed an operating system Ubuntu 14.04 on it, hoping the grub OSs double beginning located on the HARD disk.

  However, I find no the Dell bios boot option to boot from the HARD drive installed in my optical drive Bay. All the choices are 'Hard Drive', 'Network' and 'Diagnostic '.

  But I was definitely sure that my bios program has detected the SSD and HDD with information on the main menu of the bios.

  And the LED on the optical drive Bay was immediately once I pressed the Start button on my laptop.

  As a general rule, all things were right except for options of the bios boot.

  Is there a way I can boot from HDD (with installed Ubuntu) while remaining has my SSD on the main drive Bay? I don't want to swap their positions, because the SSD is super fast on the main drive Bay.

  I have alse won't migrate 10 Windows to the HARD drive and reinstall Ubuntu on the SSD, because I'd like my windows be loaded quickly.

  Someone at - it the same problem with me?

  Any suggestion is appreciated!

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Bev.

• Disk error hard 3F0 - but the hard drive is readable from another computer

  I have a HP pavilion DV7-3060us running Windows 7 home 64-bit

  This morning, he decided to not start and gives me an error 3F0 complain about a missing boot disk.

  I have a disc that is cloned several months ago that I put there and that he can use at the moment.

  I put the 'wrong' drive in an external enclosure and checked that I can see from another computer.

  I tried to run a chkdsk on it that 'fixed' some mistakes, but I still get the error 3F0.

  I would really like to fix broken files which do not allow the system starts.

  Any suggestions on how to do it?

  Thanks in advance (and I will credit good answers)

  I don't know what I'm doing, but take a look at this article

  http://mikemstech.blogspot.com/2011/12/how-to-perform-offline-system-integrity.html

• How can I fix a corrupted file cmd.exe and what I do to format the hard drive will that solve my problem and then what I do

  One of my computers has a virus and I'm ready to reformat the drive if I know what to do when I try to go to the command prompt, I get the cmd.exe message is corrupt.

  You could try to copy the cmd.exe file from another XP computer to yours.  It is usually located in the C:\Windows\System32 directory. (Save your current file first, however)  Otherwise, try to start the command-line like this:
  Start-> Run-> "command."
  Note that this should appear "command.com" which is different from the "cmd.exe" (but looks like).

  If you try to reformat the drive to reinstall Windows, simply boot from your Windows XP installation disc and launch the installation.  A reformat is a normal step in a new installation of Windows.

  HTH,
  JW

• Pavilion 17-F001dx: 'Windows 8 using 100% of the HARD drives with high average response time and low write speed '.

  

  It turns out that it is a pretty known issue windows 8.1 users infestation since at least 2013 and there is not a simple fix, then it cannot be * completely * lack of hp. but I've had two of these laptops, both the same model, one needing to be returned and exchanged for a problem absolutely no report with (hardware failure: ethernet port does not work with lights taped). Both are renovated. Both have been extreemly slow and unresponsive even compared to the lower Brazos powered by the laptop that I had before, but I recently decided to investigate why.

  So if there is something specific HP going on here, I hope that there is a simple fix. My average response time went upward as well more than a minute (> 60, 000ms), so that I'm an aberrant case here against this problem of reactivity/band bandwidth hardrive typical windows 8.1.

  Edit: there is a case with another HP pavilion laptop (intel powered, so there may be a problem of storage driver intel described in the first link) being much worse.

  Did not want to resort to that, but,.
  Going to a new facility to clean up an image of Windows Pro 8.1 from DreamSpark for my school.

  Disappointed by the lack of response. Given the odd subdomain name (h30434), I'm wondering if this forum has been abandoned.

• Get a replacement for a system recovery disk lost because the HARD drive failed

  I am replacing a HDD that failed on a laptop Compaq Presario C500 of off-warranty belonging to an elderly couple.

  They lost the CD/DVD recovery over the years since they bought the laptop.

  Is it possible to get a replacement CD/DVD?

  Mike.

  Thanks David, I will recommend to the owners and get into the download.

  Best regards, Mike.

• I had to wipe the hard drive on my Mac, how can I reinstall my purchased 5 Lightroom?

  Hi, I had to remove all my computer - just wondering how I can reinstall Lightroom? I bought the last time. When I go into CreativeCloud he invites me to install a free trial of Lightroom! Help please!

  If you have not bought via the Cloud, you do not want to download through the clouds.

  Lightroom - all versions

  Windows

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows

  Mac

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

• cannot start. tried to reinstall windows from OEM disc no go off the hard drive. How to remove computer virus problem

  error message {check HDD remove virus}

  Exactly when and where you see this msg?

  And that means "tried not to reinstall windows from OEM disc go" mean exactly?

• Hard Drive failed after replacement

  My computer recently went for a drive hard repalcement of HP Support because it is still under warranty. After that their return receipt I'm gone and ran the same test that tells the hard drive failed the last time and received a fault code of

  GGANWC-67H6K8-XD7X1F-60SF03

  It looks like the last. Is this a Bios problem causing the hard drive give errors or is it another failed hard drive?

  Hello TheProfitible,

  You just had the HARD drive replaced and now you've found a similar mistake that he does not have.

  The code checks that the HARD drive has failed.

  You should call HP and have them replace the disc again and check the motherboard. It could be a problem with the motherboard failure.

  Sorry to hear it happened.

  Here is the link for the phone number for HP.

  By clicking on the White Star congratulations on the left is a way of saying thanks!

  I would like to know how everything goes.

  Nice day.