OneKey Recovery 7.0 does not work

Similar Questions

• Recovery Media Creator does not work.

  My recovery media creator does not work. Its shows that 'no disk HARD recovery area '.
  What to do to achieve a recovery of HARD drive space?

  The message on the screen says: no HDD Recovery area

  This means that the recovery media creator software is unable to find image files stored on the HARD drive recovery partition.
  Why?
  There are different reasons for this...

  One of the reasons could be the missing HARD drive recovery partition or files (image files) have been deleted...

• Toshiba Recovery Disc Creator does not work on my Satellite P300

  Hello

  I need to make my drive recovery for my Satellite P300 (PSPCCA-05V01Y), but the Toshiba Recovery Disc Creator does not work, as it is said that it is not a file on the pc HARD drive recovery.
  I tried before, and he had a problem with the core files, saying he was corrupt.
  So I was wondering if there is in any case I can download the installation of HARD drive recovery so that I can install and put it back to "factory condition" and reburn the recovery disk?
  Cheers for any help
  Mikey

  Hello Mikey

  The situation is quite complicated. When you've got your laptop recovery files was recorded on the second partition in folder HDDRecovery. The second partition and backup files should not be modified.

  If you did something with the second partition or this file recovery Toshiba creator cannot find these files and the recovery media cannot be created. This will work with the factory only settings. but I see another problem there.
  Theoretically, you can now install new OS using the installation procedure of recovery HARD drive and with factory State, you should be able to create DVDs, but if the Toshiba Recovery creator can not find the files I'm afraid that the installation of HARD drive recovery can have the same problem.

  If you want you can test. Try to start the installation of HARD drive recovery.

• Satellite T135 how to enter Safe Mode and HDD Recovery if 'F8' does not work

  Hello everyone

  I have a laptop Toshiba Satellite T135 and it crashed recently. Since then, whenever I turn it on, startup repair is enabled automatically. But it does not fix the error.
  I tried to solve the problem with the system restore, but that no longer works. So I think I have to go through the procedure of HARD drive recovery.

  The problem is that I have a lot of data on my laptop that I must first of all safe. I wanted to do it via Safe Mode that supposedly, I should be able to enter by pressing "F8" at initialization, when the Windows logo appears. But my laptop is not responding when I press F8, but rather getting a sound alert, if I press the button for a long time.

  Apart from how to enter safe mode by pressing F8 during initialization does not work, I have a second question: Toshiba Recovery Wizard is the equivalent for the HDD recovery procedure? It is the only similar option that I could find...

  Thank you very much for your advice.

  Hello

  The recovery of HARD drive installs the image of Toshiba.
  The image is the package that contains the operating system, drivers and all the tools that have been installed on the first day of purchase; simply said; using HARD drive recovery you would set the laptop back to factory settings.

  You want to save the date before you install the operating system once more?
  Well, remove the HARD drive, put this in a USB HDD enclosure and move the file to the HARD drive to another computer.
  It would be the best way to get the file save.

• Re: Recovery disc creator does not work on the Qosmio F50

  Hello

  I recently got my new laptop Qosmio F50. I decided to burn the recovery disk and so I did. But during the burning process, I got an error that is:

  "Diference were detected between different folders:

  Source path: (origin)
  F:\HDDRecovery\SWImg\06907XPS.swm

  Target path: (I would translate as destination)
  G:\06907XPS.swm
  (error code: 02016F-3 c-00000000)

  Well, I've been through the posts from diferent on this forum and I didn't know of any help on this matter. Of course, I bought new DVD-R TDK and I also tried with verbatim DVD-R but it does not work.

  Anyone have any idea how to deal with this issue, because for example I have still no recovery disc and if something would have happened, I wouldn't be able to configure back my OS.

  Thanks in advance for your help

  Best regards

  Hello

  To me it sounds like the final burning self-check failed and the application couldn't t properly compare two files on the HARD drive and DVD.

  Why? It's not easy to say maybe the problem is with the DVD disc not fully supported, but I saw that you used the TDK DVD-R it are really good media and should run.

  Maybe you should try to update the firmware

• I want to restore from a backup Windows Live One Care, I downloaded the recovery tool but does not work?

  I downloaded the recovery tool, but it does not work

  Hey Buster,

  The question you posted would be better suited to the community restoration and backup of Windows live OneCare. Please visit the link below to find a community that will provide the support you want.
  http://social.Microsoft.com/forums/is/onecarebackupandrestore/threads

• Re: Satellite L300 - made recovery but disc does not work

  I have a Satellite L300 and did a few sets of recovery discs from what I read some brands work and some don't, and none have so far.

  Insert Diskette 1, press the button and hold F12 key until the startup option appears.
  Select CD/DVD and then back type box appears with X:\windows\system32\cmd.exe - startnet.cmd
  and in the box waiting for ODD vacancies...

  You can add several points after that as nothing is more - so three sets of recovery disks on three different brands of DVD any advice would be pleaseing!

  Brian

  Hello

  According to your description, the system restore procedure does not start, and the STRANGE can not read the disc.

  In your case I would recommend recover laptop using Toshiba HDD recovery.
  You can start the procedure of HARD drive; Press F8, choose repair my computer, Toshiba HDD recovery.
  Now the system restore should products

  After the laptop has been set to factory settings, check to see if there is an update of firmware for this CURIOUS (CD/DVD drive). If yes-> update the firmware.
  I know you tried three different brands of DVD but you should always try to create a recovery disk using another DVD disc I m using TDK DVD-R and had good experience with it. One of my friends uses Verbatim DVD-R and never had problems

• Recovery DVD creation does not work on Satellite L500-1UR

  Hello

  on my Satellite L500-1UR this two DVD that I created and the Windows 7 Home premium 32-bit with the PC do not work...
  In both cases, the restore process seems to work fine but the phase of finishng never ends... Start, restart, rereboot... and so on.

  Resettlement using a 'standard' Windows 7 32 bit seems to work... but... I'm afraid that I might have lost something.

  How to get the DVD of "correct"?
  Thanks for help

  Hello

  Please check if you can create the recovery discs using another DVD from different manufacturers.
  I had the same problem in the past. I've tested some Verbatim DVD R TDK and could create the recovery DVDs.

  Welcome them

• Satellite L655 - HE Recovery Media Creator does not work

  Hello!

  Kindly, I have a Toshiba Satellite L655-1HE for quite awhile, and this isn't the first that I have more than 4 laptops, but I never faced this problem...

  I'm running the * creative media recovery tool, but it NEVER works! * .....
  Is there a way to solve this problem to be able to create a Recovery Media DVD?

  Thank you & best regards

  What exactly do you mean by never works?
  You are not able to start this software or this error have you noticed?

• Am very frustrated-technician/technician said I had to buy the eRecovery recovery software-it does not work

  The eRecovery software does not solve the problem - it hangs on 'type', select Recovery - 3 options are greyed out & the single active option is out. I tried 1 suggestion "ctrl + left shift + esc" - which does nothing.  I also tried Alt + Home, which opens a screen that has "X:\windows\system32.  But this does not seem to make a difference.  I have absolutely no case try to get assistance Acer.

  You must open your PC case and check on the cables.
  If the cables are well connected, is probably a dead HARD drive.
  If you are not comfortable to do, bring it to a computer store.

• Toshiba Recovery - 2nd disk does not work

  Hi all

  I wanted to recover my original Windows I created 2 DVDs when I bought the laptop.
  the first DVD worked OK and erased everything, so he will not read my second DVD although it seems in good condition for me and can be read on other devices.

  is there a way I can recover my original windows?

  I tried pressing 0 at startup but no use.

  Thank you very much

  Hello

  It is a very bad situation now. All you can do is try again. Make the second DVD clean and try again.
  I really hope that it works somehow. If this isn't the case, you have a big problem.

  Before recovery image installation starts any HARD drive will be formatted so there is no chance to start installation of disk recovery HARD from the HARD disk (using 0 at startup).

• Satellite L500D PSLK0A Toshiba Recovery Disc Creator does not work properly

  Hello

  I am trying to create a recovery for my Toshiba Satellite L500D PSLK0A-00U009 disc.
  When I run the Recovery Disc Creator he starts to open then it comes up with a box with an exclamation point, he says: 'cannot open target partition. Then the recovery disc creator will open. It seems normal, then when I insert a CD for the process seems to work then it says error and stop and ejects the CD, the error is that the code is: 0E01B5-26-510444 D 9

  I already uninstalled and then program then reinstalled with the help of a download from the Web MyToshiba site and this has not fixed the problem.

  Any suggestions?

  Hello

  Have you tried different discs from different manufacturers?
  How about you, USB flash memory usage? AFAIK, you can create a bootable Recovery USB flash stick too.

• Tecra A9 - Recovery Disc Creator does not work

  I tried to make the recovery disc for my Tecra A9.
  I managed to make the two recovery system (DVD-R) discs, but when I try to make the Applications disc I get an errormessage right after that the program wants me to verify that I put a blank disc in my DVD burner.

  _Errormessage: _

  An unexpected error caused.
  Exit this application and start it again.

  (Error code: 0E01C7-15-00000000)

  Hello

  Maybe you should try different media
  These error messages appear especially if a disc is not completely compatible

  I guess you used the same discs previously in order to create the right recovery disk, I know it's strange, but I think you should try another disc.

  See you soon

• Recovery of product does not work

  I believe I had crashes on my computer so I decided to use the recovery of the product CD. Whenever I try to restore it, it blocks to halfway through the writing of the Ghost image on the hard drive. Could you all this be due to a bug/virus on the hard drive and therefore needs formatting? If so, with a port USB how to boot from USB format the hard drive? Or is there another explanation?

  Hello

  to boot from USB you must hold down a key on startup. A key which depends on your model of laptop. For some machines, that it is up to you to boot directly from USB, for others it is F12 or ESC to get in the start menu.

  But I don't think that something on your hard drive is the cause of your problem. It seems more that you have a faulty recovery CD. If so, you can get a new one to a Toshiba service partner.

  Good bye

• HARD does not work after changing the disk partitions recovery media creator

  Hello world

  After installing windoows 8.1 April major upgrade (win 8.1 presents as OEM), and have shrunk C partition to create a data partition "D", "Troubleshooting" option under advanced start menu is no longer available.

  Toshiba Recovery Media Creator does not work, too (it can not find any hard disk recovery partion).
  I got in the OEM recovery partition.
  I am also able to create a recovery using the Windows tool unit.
  You have no idea about it?

  Thank you very much!

  Hello

  Sorry to hear about all this. Unfortunately, you now have a big problem. I don't understand why you didn't create support of recovery before you started to change the factory settings, including to change the structure of the partitions of HARD drive.

  Mobile offered with factory settings a structure specific partitions and recovery recorded image is saved on the partition of drive specific and marked with invisible markers. These markers are visible for preinstalled Toshiba recovery media creator tool and when you start the tool can find points of reference and has full access to specific files.

  Unfortunately, after changing the original scores structure Toshiba tool cannot find these markers more and is not able to copy files from recovery media recovery. What you need now is the original recovery disk. Using this disk, you can install original recovery image and after doing this, you will have new factory settings.

  I know it sounds stupid now but you must order the original recovery disk and it can be done on https://backupmedia.toshiba.eu/landing.aspx

  If you have any other questions you are welcome.