Re: Recovery disc creator does not work on the Qosmio F50

Similar Questions

• Toshiba Recovery Disc Creator does not work on my Satellite P300

  Hello

  I need to make my drive recovery for my Satellite P300 (PSPCCA-05V01Y), but the Toshiba Recovery Disc Creator does not work, as it is said that it is not a file on the pc HARD drive recovery.
  I tried before, and he had a problem with the core files, saying he was corrupt.
  So I was wondering if there is in any case I can download the installation of HARD drive recovery so that I can install and put it back to "factory condition" and reburn the recovery disk?
  Cheers for any help
  Mikey

  Hello Mikey

  The situation is quite complicated. When you've got your laptop recovery files was recorded on the second partition in folder HDDRecovery. The second partition and backup files should not be modified.

  If you did something with the second partition or this file recovery Toshiba creator cannot find these files and the recovery media cannot be created. This will work with the factory only settings. but I see another problem there.
  Theoretically, you can now install new OS using the installation procedure of recovery HARD drive and with factory State, you should be able to create DVDs, but if the Toshiba Recovery creator can not find the files I'm afraid that the installation of HARD drive recovery can have the same problem.

  If you want you can test. Try to start the installation of HARD drive recovery.

• Satellite L500D PSLK0A Toshiba Recovery Disc Creator does not work properly

  Hello

  I am trying to create a recovery for my Toshiba Satellite L500D PSLK0A-00U009 disc.
  When I run the Recovery Disc Creator he starts to open then it comes up with a box with an exclamation point, he says: 'cannot open target partition. Then the recovery disc creator will open. It seems normal, then when I insert a CD for the process seems to work then it says error and stop and ejects the CD, the error is that the code is: 0E01B5-26-510444 D 9

  I already uninstalled and then program then reinstalled with the help of a download from the Web MyToshiba site and this has not fixed the problem.

  Any suggestions?

  Hello

  Have you tried different discs from different manufacturers?
  How about you, USB flash memory usage? AFAIK, you can create a bootable Recovery USB flash stick too.

• AC adapter does not work with the Qosmio F50-111

  Hello world

  I bought a Qosmio F50-111 this morning.
  The power adapter does not work on my computer (no led lit when connected), but he's working on a Satellite A300 for a working partner.
  And his power works on mine.

  I would like to know if people here have a Qosmio F50-111, the model of power that I have a model 3290-3AC3... I would like to know if it's good.

  Thank you all

  Before you expect an answer here, contact your local dealer and clarify this situation. You can also contact the nearest authorized service provider. They can say with certainty if the power adapter is one that suits or not. If you have the wrong I'm sure you get the right one for free.

• Tecra A9 - Recovery Disc Creator does not work

  I tried to make the recovery disc for my Tecra A9.
  I managed to make the two recovery system (DVD-R) discs, but when I try to make the Applications disc I get an errormessage right after that the program wants me to verify that I put a blank disc in my DVD burner.

  _Errormessage: _

  An unexpected error caused.
  Exit this application and start it again.

  (Error code: 0E01C7-15-00000000)

  Hello

  Maybe you should try different media
  These error messages appear especially if a disc is not completely compatible

  I guess you used the same discs previously in order to create the right recovery disk, I know it's strange, but I think you should try another disc.

  See you soon

• Recovery Media Creator does not work.

  My recovery media creator does not work. Its shows that 'no disk HARD recovery area '.
  What to do to achieve a recovery of HARD drive space?

  The message on the screen says: no HDD Recovery area

  This means that the recovery media creator software is unable to find image files stored on the HARD drive recovery partition.
  Why?
  There are different reasons for this...

  One of the reasons could be the missing HARD drive recovery partition or files (image files) have been deleted...

• Satellite A210 - 19(d) - Toshiba Disc Creator does not work after last update SP2

  Satellite A210 - 19(d), HomePremium Vista 32.
  Toshiba Disc Creator does not work after update to sp2. Error code is 32007C-26-00000001.

  He needs to click ok up to 17 times to eliminate the error window, but it is more.

  Everything was OK before sp2.

  Please take a look in this thread:
  https://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=60687

  It user pdun459 had the same error using the Toshiba Disc Creator and could solve this uninstall and installation of this new

• Recovery disc creator is not installed on the Satellite A305

  It turns out that this laptop (Satellite A305) doesn't have the included Recovery Disc Creator! ...

  There is none
  Start - Programs - recovery Disk Creator.
  Neither
  "C:\Program Toshiba Toshiba Recovery Disc Creator\."
  Neither
  "TRDCLcher.exe" anywhere on the hard drive (including the hodden records)

  I do not delete anything, I was fully aware of the importance of the creation of a RD
  There is only a 'applications and drivers disc creator' which, in itself, is no way to restore the system.
  Turn on/off the system with 0 doe hurry not bring the wizard of recovery of HARD drive either, just a series of beeps.

  The so-called official support said that they could not sell me any media that Toshiba only gives to clients directly (tat how´s for nonsense!)

  Ironic that it would be easier to get Linux or a bootleg copy than to take the "supported" path...) -[

  Hello

  Your laptop belongs to the Toshiba series us and that's why I put t exactly know how it works on this laptop, but on the European of Toshiba laptop, you might find the Toshiba disc creator software that allows you to create a Toshiba Recovery disk.

  I put t understand why ASP you called t couldn't sell you a recovery disk. I think that you asked someone who didn t know that.

  Usually the ASP should be able to provide such discs. So either you can call Toshiba USA or ASP and ask again this recovery disk.

  Good bye

• Motion controller does not work on the Qosmio G50

  Hello

  as well as problems with my touchpad that I can't seem to get the job and my fn + f9 that does not work, I discovered today that my gesture controller no longer works?

  I went on the site of toshiba europe and downloaded the latest driver for it but once again, I received the message "an error has occurred in the toshiba quad core processor HD = 0x800A0100 code?

  Any help would be wonderful that its driving me around the bend!

  > as well as problems with my touchpad that I can't seem to get the job and my fn + f9 that does not work, I found out today that my gesture controller no longer works?
  So much trouble, you got there. You may create a Groove and reinstall the original recovery image. After having done this you own preinstalled OS and with the factory settings, everything should work again.

  What do you think about this?

• Bridge media slot does not work on the Qosmio series F

  Crack media bridge in front of my laptop is not working.

  I put the card in and the idicator light systym for SD card flashes briefly.

  I can't access the files via my docutments or my computer.

  Is there a driver necessary?

  Hello

  Of course the bridge Media controller driver is necessary if you have not installed this in the past
  Have you checked for some unknown devices Device Manager? The SD (Bridge Media controller) card is correctly listed in the Device Manager?
  If this isn't the case, then it means that this driver must be installed.

  If the controller is listed in Device Manager, it means that this device does not work correctly and there must be another issue; Maybe with card SD

• Satellite Pro A100 - recovery disc creator does not exist!

  Can anyone help! My laptop works fine, but I wanted to create a bootdisk problems.

  But Toshiba Assist > Protect & Fix > does not give me an option to create a startup disk.
  Should this with this model?

  I have the recovery disk Toshiba that came with the computer, but were warned NOT to test, otherwise it can actually cause me problems!
  Any ideas?

  Satellite Pro A100-302
  Part number: PSAACE-008002EN

  This option is not available on this model of laptop. Because of this, Toshiba offers recovery DVDs which can be used for the installation of operating system.

  > I have the recovery disk Toshiba that came with the computer, but were warned NOT to test, otherwise it can actually cause me problems!
  This info can only come from people who don't know what they are talking about. Please ask this person what he exactly meant, and I will offer you the good explanation on the recovery procedure if you want to.

• Satellite L655 - HE Recovery Media Creator does not work

  Hello!

  Kindly, I have a Toshiba Satellite L655-1HE for quite awhile, and this isn't the first that I have more than 4 laptops, but I never faced this problem...

  I'm running the * creative media recovery tool, but it NEVER works! * .....
  Is there a way to solve this problem to be able to create a Recovery Media DVD?

  Thank you & best regards

  What exactly do you mean by never works?
  You are not able to start this software or this error have you noticed?

• "bluraydp - 20130117155646.zip" does not work on the Qosmio X 770

  Hello friends,

  I had a problem, I received a few days ago a toshiba tempro alert to upgrade my drive internal bluray
  CARPET * BD - CMB UJ141EF drive with this file bluraydp - 20130117155646.zip.

  I got a Qosmio x 770 with windows 7 x 64, I unziped the file, there is a TC30526100B.exe inside the zip, with an extractor of archive of toshiba.

  I run the TC30526100B.exe and it extracted these files:
  tinstallwb.exe
  tinstall.exe
  tinstallb00.bat
  tinstallwb.exe.ini
  PreinstBDP.vbs
  SMIPlayerSetup.exe
  BDPlayerSetup_Patch.vbs
  WBDJA44I. DLL
  Bluestream.bmp
  WBTOS45I. DLL

  When I run tinstallwb.exe and tinstall.exe he does nothing, when I run SMIPlayerSetup.exe, it says cannot find our player in our systems.

  Which player they are talking about?

  Thanks for your help

  Hello

  This is the patch of Toshiba Blu - ray disc player.
  The full version of the Toshiba Blu - ray player software must be installed on your system in order to apply this hotfix.
  You should find it somewhere in
  All programs-TOSHIBA \TOSHIBA Blu - ray player.

• My Pc came with Photoshop elements 11 I did a factory rest on my pc and now Photoshop does not work. The error code is 213:19 I have not the disc to install it came with the pc already installed.

  My Pc came with Photoshop elements 11 I did a factory rest on my pc and now Photoshop does not work. The error code is 213:19 I have not the disc to install it came with the pc already installed.

  I hope this will help:

  Error 213:19 | Problem is the license for this product

• Portege M200 - pen does not work with the screen

  So I bought a pen for M200 and reinstalled the operating system.
  Now I M200 with Windows XP Tablet PC edition, a utility Screen Rotation and usefulness of the stylus button. Now Pen buttons work fine with my new pen, but the screen itself does not work. I mean, the stylus does not work with the screen.

  I have a mouse, and another menu pointing devices in Device Manager and it includes the following submenus:

  HID compatible mouse (I use the random DELL mouse)
  Mouse PS/2 Cimpatible (?)
  --------

  I think there must be something else...
  Please tell me, forum, what drivers should I download to get the pen to work?

  Stand by. Are you using the original image of recovery Toshiba (operating system) or you have installed your version?