IOS does stand in a situation?

Similar Questions

• 10 iOS does not well at all. Notes is much harder to change more before. The start screen is so clumsy. How can I get rid of all the widgets of the splash screen?

  10 iOS does not well at all. Notes is much more difficult to edit with touch screen as before. How can I erase my start of all the widgets screen? I might want to go back to iOS earlier.

  "How can I erase my start of all the widgets screen?" is the only question that you asked, so here's the answer:

  Some widgets may not be deleted, but you can move the widgets that you use most on the front screen and keep the ones you don't want a rear screen. Or, you can take the widgets you want and move them to a single folder.

• BBM BBM on ios does not work since last Friday

  BBM on ios does not have since last Friday... I cannot send any messages and also I get no msgs.

  for me or for everyone.

  BBM on iOS started working...

• Call Forwarding 9.3.1 ios does not work

  After the update of ios of 9.3 to 9.3.1 WHAT CALL FORWARDING does not work

  Call forwarding is a function of carrier. Contact your operator.

• Hash MD5 for PIX515 IOS does not match check

  I've recently updated our firewall PIX515 release 7.2.2 to 7.2.4 and I wanted to check the hash MD5 for the downloaded IOS. However the hash generated on the PIX using the verify command does not match the hash that is published on the website of download of cisco. Published f2f6b88ea1b4a0b33045b3b18d0fb852, generated hash hash is fdcd... I checked the MD5 7.2.2 on a firewall, I have not yet updated and does not correspond to either. Am I missing something?

  OK, so you've downloaded an intermediate version - 7.2.4 (30), instead of the main exit of 7.2.4.

  7.2.4 checksum (30) is correct and corresponds to which advised you earlier: fdcd3a9d884baf0ec0aad78048f0e441

  You can check it out here:

  http://www.Cisco.com/cgi-bin/software/tablebuild/doftp.pl?ftpfile=Cisco/internal/special/ciscosecure/PIX/pix724-30.bin&app=tablebuild&status=showC2A

  Hope that clarifies the confusion.

• Client VPN router IOS does not connect

  Hi all

  I'm having some trouble of Client VPN connection over the internet to our Cisco IOS router. Some help would be very appreciated!

  On the VPN client log I get the following error messages:

  ---------------------------

  ...

  573 16:32:13.164 21/12/05 Sev = WARNING/2 IKE/0xE3000099

  Size invalid SPI (PayloadNotify:116)

  574 16:32:13.164 21/12/05 Sev = Info/4 IKE/0xE30000A4

  Invalid payload: said length of payload, 568, not enough Notification:(PayloadList:149)

  575 16:32:13.164 21/12/05 Sev = WARNING/3 IKE/0xA3000058

  Received incorrect message or negotiation is no longer active (message id: 0x00000000)

  ---------------------------

  We get debugging on the router that I'm trying to connect:

  ---------------------------

  router #debug isakmp crypto

  ...

  21 Dec 16:32:16.089 AEDT: ISAKMP (0:0): received 203.153.196.1 packet dport 500 sport 500 SA NEW Global (N)

  21 Dec 16:32:16.089 AEDT: ISAKMP: created a struct peer 203.153.196.1, peer port 500

  21 Dec 16:32:16.089 AEDT: ISAKMP: new created position = 0x678939E0 peer_handle = 0 x 80000031

  21 Dec 16:32:16.089 AEDT: ISAKMP: lock struct 0x678939E0, refcount IKE peer 1 for crypto_isakmp_process_block

  21 Dec 16:32:16.089 AEDT: ISAKMP: 500 local port, remote port 500

  21 Dec 16:32:16.089 AEDT: insert his with his 67B0AB34 = success

  21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): treatment ITS payload. Message ID = 0

  21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): payload ID for treatment. Message ID = 0

  21 Dec 16:32:16.089 AEDT: ISAKMP (0:0): payload ID

  next payload: 13

  type: 11

  ID of the Group: eggs

  Protocol: 17

  Port: 500

  Length: 12

  21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): peer games * no * profiles

  21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): load useful vendor id of treatment

  21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): supplier code seems the unit/DPD but major incompatibility of 215

  21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): provider ID is XAUTH

  21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): load useful vendor id of treatment

  21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): provider ID is DPD

  21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): load useful vendor id of treatment

  21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): supplier code seems the unit/DPD but major incompatibility of 194

  21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): load useful vendor id of treatment

  21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): supplier code seems the unit/DPD but major incompatibility of 123

  21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): provider ID is NAT - T v2

  21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): load useful vendor id of treatment

  21 Dec 16:32:16.089 AEDT: ISAKMP: (0:0:N / A:0): provider ID is the unit

  21 Dec 16:32:16.089 AEDT: ISAKMP: analysis of the profiles for xauth...

  .....

  21 Dec 16:32:16.093 AEDT: ISAKMP: (0:0:N / A:0): atts are not acceptable. Next payload is 3

  21 Dec 16:32:16.093 AEDT: ISAKMP: (0:0:N / A:0): audit ISAKMP transform 12 against the policy of priority 3

  21 Dec 16:32:16.093 AEDT: ISAKMP: 3DES-CBC encryption

  21 Dec 16:32:16.093 AEDT: ISAKMP: MD5 hash

  21 Dec 16:32:16.093 AEDT: ISAKMP: group by default 2

  21 Dec 16:32:16.093 AEDT: ISAKMP: pre-shared key auth

  21 Dec 16:32:16.093 AEDT: ISAKMP: type of life in seconds

  21 Dec 16:32:16.093 AEDT: ISAKMP: life (IPV) 0x0 0 x 20 0xC4 0x9B

  21 Dec 16:32:16.093 AEDT: ISAKMP: (0:0:N / A:0): pre-shared authentication offered but does not match policy.

  21 Dec 16:32:16.093 AEDT: ISAKMP: (0:0:N / A:0): atts are not acceptable. Next payload is 3

  ---------------------------

  You can apply the encryption the WAN interface card and check?

• Applications for iOS does not work after update from cli 6.3.0

  After an update on August 3, when the Service of Build upgrade cli 6.3.0 my apps did not work for iOS, I have an iPhone 4 running iOS 7.1.2 and an iPad running iOS 9.3.3. After the build service update, no matter if I specify a lower version of cli, on the iPhone he asked a more recent software when I try to install from iTunes, but the iPhone and iTunes running on the latest version. On the iPad it installs, but the application icon does not appear on the iPad, so I can't access the application.

  Everyone knows a similar problem? I tried to look for documents but did not find any significant syntax change that could cause the problem. I even did a restore on my code (I had an old version of the compiled application and it worked, then I did a restore to this date on my code) and it does not work yet.

  ryanskihead not really, we test with 2 models, an iPad 2 running iOS 9.3.3 and an iPhone 4 iOS running 7.1.2 in both cases, the application does not, but the behavior is different:

  -On the iPad it installs successfully on iTunes, but the icon does not appear on the iPad

  -On the iPhone it says that it can not be installed because it requires a newer version of the iOS, but the iPhone is running the latest available version of iOS.

  If I specify a deployment target, say iOS 7 for example, it doesn't do anything on the iPhone. This and a similar thread I've seen on the target community deployment cli 6 ignorant, I would say that there is a bug with phonegap cli 6 + versions used on the Build Server.

  The problem now solved in time by doing a restore to phonegap cli 5.2.0, TI began works fine after that, so I don't know if there is a bug on higher versions of cli phonegap or there is a syntax change not yet published on config.xml

• App Keynote iOS does not work since the last update

  App Keynote has been updated in May 10th but never completed installation. I tried to uninstall it but when I impulses the X button, nothing happens. I restarted my iPhone but Keynote does not open and I can uninstall either. The icon is now hidden

  

  Hello

  I guess that you do not have a computer

  Launch iTunes and connect the iPhone to a computer.

  Click on delete > > Sync > > apply.

  

  Keynote address will be deleted from the iPhone.

  Back to iTunes on the computer and try again to install Keynote.

  Click on install > > Sync > > apply.

  

• iCloud 9.3.1 iOS does not

  Hello

  after update to iOS 9.3.1 I'm not able to backup to iCloud with iPhone is

  some suggestions?

  TKS

  How much space do you have?

  You can also try - iCloud - backup - backup now to force a manually settings

• 9.3.1 iOS does not install

  I have the new iPhone SE. Although iOS 9.3.1 has automatically downloaded, it will not be installed. Should I do to get the update to install?

  It would be useful that you have described what is happening when you try to install the update, but without more information, I recommend a forced reboot, and then try again. Press and hold the home and sleep for about 10 seconds until the Apple logo appears on the screen, then release the buttons.

• 9.3.4 IOS does not install on my iphone 6

  I managed to download the software update, but repeat me error during the installation of the update. I have more than 500 MB of free space. He keeps asking me to try again and I still do, it won't install the update. any suggestions?

  Are you trying to live update, or using iTunes? If you try to do the live update, try to use iTunes instead. 500 MB is not enough free space to complete the installation.

  If you try to update via iTunes, which is the exact wording of the error message you get?

• Notifications in iOS does not?

  I use Skype on an iPad 3 and have a Skype number active.
  However, whenever I call my Skype number from a regular phone (fixed), I always get a signal of occupation and the iPad never rings (or indicates a missed call).
  I enabled it in Notifications for Skype.
  
  Ideas anyone?
  
  Thank you.

• Why does Microsoft consider my situation of REAL account so inconsequential they they will not help?

  How to get microsoft to remove an old e-mail address of my Live account, I asked 3 times, they tell me just ease of details to remove.

  BUT the new holder of the account OR the 'catch all' account at the level of the domain holder must keep the reactivation of the email because I ask to remove and it sends an email. Microsoft will not listen AND they don't care what my xBox account with my credit card details. I NEED the old deleted email!
  At least the PSN Network hackers were not facilitated. Microsoft is actually ALLOW people to access my account by removing is not it. I had to reset my password AND go through the process of validation ANY who is to tell one of the staff said microsoft my details of credit card because someone changed some of my contact information. I don't know how long they are in my account.
  I wouldn't have this account more if it is not required by the XBox and my Microsoft Training, simply because of this lack of compassion!

  This comment forum is unfortunately not Hotmail or Live Mail, Xbox.

  Contact Xbox support:
  http://support.Xbox.com/en-us/pages/contact-us.aspx

  Xbox technical support forums:
  http://forums.Xbox.com/xbox_forums/xbox_support/default.aspx

  You can find Live.com support by email here:
  http://windowslivehelp.com/product.aspx?ProductID=15

  Real account compromise - unauthorized account access

  http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

  Hotmail support:

  http://windowslivehelp.com/product.aspx?ProductID=1

  Account compromised Hotmail - unauthorized account access:

  http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

• still kb2804577 guard present again and again, but add/Rem shown as installed programs. Fix it does not improve the situation.

  I worked on it at least a week

  Harry,

  The following was extracted a thread earlier on the same exact topic.
  (It may be worth your while to find this previous thread get the complete picture).
  Step by step that has worked for others similarly vexed was:

  Website updates from Microsoft, locate and download the update file: NDP20SP2-KB2804577 - x 86 .exe in a new folder.

  Universal use - Extractor.exe by Jared bunking to extract the bits contained in the update file using the extract here option. There are probably many other options of software for extraction, but Universal Extractor is known to work with good results. Universal - Extractor.exe lie on filehippo.com

  In these pieces just extracted was file: NDP20SP2 - KB2804577.msp

  Option to use universal Extractor again NDP20SP2 - KB2804577.msp to extract a second level of bits to help extract here. (maybe type q to Quit in a pop-up cmd window when it has finished this step.)

  In these extra bits was the file: FL_System_Security_dll___X86.3643236F_FC70_11D3_A536_0090278A1BB8

  Rename: FL_System_Security_dll___X86.3643236F_FC70_11D3_A536_0090278A1BB8 to System.Security.dll (which is the version 2.0.50727.3646)

  Replace: C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\System.Security.dll with this new version of the System.Security.dll

  (You can keep a copy of the old System.Security.dll somewhere, first, just in case)

  Delete all the remaining bits extracted and restart.

  No guarantees, but these are the steps that worked for me and others to eliminate the cycle without end of update for KB2804577 requests.

• A simple question - what DOES stand for?

  It seems strange that I created and deployed ACEs using workstation for several years now, but I have no idea what that means ACE. ?:|

  Assured Computing Environment, I think.  Should be in the manual of the ACE.