Only able to connect to the internet on behalf of the 1 user now

Similar Questions

• not able to connect to the database users

  Hello
  
  
  OS Oracle Solaris on SPARC (64-bit)
  database version 10.2.0.2
  
  
  
  There was a problem, one of the database, most of the applications were unable to connect, only 1 or 2 managed applications to connect, which totalled around 4 to 6 hours. Once the database has been recycle everything was ok, so what could be the reason? I have too many words from sr oracle, oracle specified as there was a sql with 13000 executions, also as 2 users have tried to update the same row in the table, so that users must commit frequently, just read the lines highlighted. My question is if there is a conflict of line, that would restrict other applications to connect to the database. And after reboot, everything was normal. I m wondering as is the resource_limit or max execeeded processes at this time this is why not able to sign in as user applications oracle unable to generate new processes.
  
  As I mentioned in the SR #, users could not establish connection to recycling of the database at all. So what is the root cause?
  
  
  
  
  Support of Oracle - December 06, 2010 16:01:13 GMT - 05:00 [Notes]
  
  Generic note
  ------------------------
  Report from the WORKING REPOSITORY for
  
  
  Snap Id Snap time Sessions sliders/Session
  BEGIN Snap: 14408 26 November 10 17:00:18 258 32.0
  End Snap: 14413 26 November 10 22:01:02 185 28.0
  Elapsed time: 300,74 (min.)
  DB time: 31,230.47 (min.)
  
  
  
  
  Top 5 timed events
  
  Event waits time Avg Wait (ms) % Total call time wait class
  enq: TX - 633 699 1 855 919 line lock conflict 99.0 2 929 Application < < < < # 1.8 million secondsdb file sequential read 2 434 765 11 577 5.6 user I/O
  Time CPU 7 758.4
  db file parallel write 269 025 1 012 4.1 system I/O
  db file scattered read 227 528 889 4.0 user I/O
  
  
  Time elapsed (s) hour (s) of the CPU executions Elap by Exec (s) % Total DB SQL SQL SQL text Module Id at the time of
  1 530 609 25 13 497 81,68 113.40 b3fzxpwsmj044 llserver@linkvprad1 (TNS V1 - V3) update KID set ID = ID + A1: where...
  
  
  single command which is close to 1.8 million seconds.
  
  update of b3fzxpwsmj044 KID set ID = ID + A1: where IDType = 0
  
  Segments of line lock waits
  Capture shows the line lock % % expected for each upper segment by report
  with the line total lock waits for all segments, captured by the snapshot
  Tablespace name object name subobject name owner Type obj. line lock waiting for Capture %
  TAB_ADM TAB_DATA KID TABLE 208 95,41 < < < < # object with line lock waits for even that above command
  
  
  UPDATE
  ========
  Hello
  
  It seems that many people have tried to run the same day order at the same time.
  (more than 13,000 executions)
  
  Update KID set ID = ID + A1: where IDType = 0
  
  and segment shows the same table.
  
  It is an application problem, two people can not update the same rows at the same time.
  OR
  After that the users update must initiate more timely work.

  sb92075 wrote:
  ..., but this has NOTHING to do with the connection problem & or not posted anything else.

  Not so sure. Is this connection to database, or application? The OP wrote "+ one of the basis of most of the applications were not able to connect, only 1 or 2 applications has managed to connect +", don't know what that means exactly, depends on how the application manage the connection. It can start with the search/update of this table where the problem may come from.

  Nicolas.

• After changing the orainventory place im unable to connect using the oracle user

  Hello

  IM using oracle 12 c on rhel 6 after correctly installing the software, I changed the location of oravinventory in/data/houses

  / u01/app/Oracle

  After making these changes im is no longer able to connect using the oracle user...

  also I back return changes I had made to the orainventory folder still unable to connect using the oracle user...

  any help on this would be greatly appreciated

  Sadia. wrote:

  Hello

  IM using oracle 12 c on rhel 6 after correctly installing the software, I changed the location of oravinventory in/data/houses

  / u01/app/Oracle

  After making these changes im is no longer able to connect using the oracle user...

  also I back return changes I had made to the orainventory folder still unable to connect using the oracle user...

  any help on this would be greatly appreciated

  Newer versions of oracle have implemented a great new technology to help solve problems, called "error messages."  Unfortunately, I can't find any reference to an error message named 'is no longer able to connect.

  And why you are moving your site from inventory?  When you have installed oracle, he put the inventory where he wanted.  There is no reason to try to change or replace.

• Recently, I got the following virus. Win32/Sirefef.DAtrojan, I was not able to connect to the internet since then.

  Original title: Win32/Sirefef.DAtrojan

  Recently, I got the following virus. Win32/Sirefef.DAtrojan

  I was not able to connect to the internet since then.
  Y at - there someone who can help me with the connection to the internet?
  I have a Dell XPS600
  Microsoft XP Professional

  Hello

   
  1. what happens when you try to connect to the internet?
  2 - is confined to the browser Internet Explorer problem?
   
   
  I suggest you perform a full scan of the system.
  Here is a link that will give you know how
   
  Perform a full scan of the system:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
   
  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• Im not able to connect to the internet?

  Im not able to connect to the internet and the message that reeds "the instruction at"0x00bb707c"referenced memory at 0x1ab4a07 memory could not writen

  Hello

  1. don't you make changes to your computer before the problem?

  I suggest that you follow these steps and check if the problem persists.

  Step 1:

  Test the issue in safe mode with network.

  Step 2:

  If it works fine in safe mode with network, turn on your computer in a clean boot State and check if the problem persists.

  Note: Don't forget to restart your computer as usual.

• My computer is no longer able to connect to the internet. I can download updates of Windows and Adobe but not surf the net in the browser.

  original title: internet connectivity

  My computer is no longer able to connect to the ' net.  This ab took place two months ago.  I still get updates from MS and Adobe, but will not connect to any Web site.  I've tried wired and wireless.  All my other computers are connected again and the router and the modem seems to work properly.  This occurred after a windows update has been installed automatically while I was away and there was no restore points.  Other connectivity issues, the system works properly and I am connected to my local network, not just the internet.

  Hello

  You can follow below link that can help you to solve your problem:

  Reset Internet Explorer settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/reset-Internet-Explorer-8-settings

• Network Vista - "local access only" - unable to connect to the internet

  Hi all, I use my old y550 of one day, and I can't connect to the internet via my wireless router.  When I go to use the Connection Wizard internet, that I am able to connect to the router but not the internet.  Very, very annoying!  I tried all the trouble shooting tips in Vista, but none of them make any difference at all.   And oh yes, I put Vista "connect automatically" for the router, but it never - sticks I always (try to) reconnect manually.  How can happen on a new machine?

  Hi all, understood the problem - need to update the firmware on my linksys router.  Once I did, I could connect.  I still have to manually connect everytime I restart the computer, however, despite the box "connect automatically".  Any ideas?

• not able to connect to the game of google on mobile data store

  I bought gold x 2 lenovo 32 GB vibe.

  in this unit, I am not able to connect to the playstore in mobile data, it says check your connection. But Internet is active n I can navigate can open FB also.

  Yet one thing I'm not receving messages instantly in whatsapp, fb, viber. Once I open the app and then receive only the mesaages.

  and after the last firmware update whatsapp contacts are not synchronized, integrated Lenovo Security app is diabling syning whatsapp contact.

  Please give the solution.

  
  

• Not able to connect to the server with modem 56 k

  I try to connect my Tecra via modem 56 k Internet.
  Also, I tried with another computer laptop with the same details and that worked.
  But when I try it on my Tecra I get an error that is not able to connect to the server.

  So I think that it is a parameter that is not defined correctly for the modem.
  (If you compare it to another laptop all parameters are the same as windows).

  Thanks in advance,

  Theo

  Hello Theo

  Please remove the Dial-up connections all created and after that, remove the modem from Device Manager. Restart the device and initially ensure that the modem is properly configured (query modem Agic under Diagnostics). I put t know which Tecra you have, but many of them have preinstalled TOSHIBA PC Diagnostic Tool. With this tool, you can see all the equipment including modem.

  After having it set up new Dial-up connection and check the functionality. Be sure to wait for the tone option is disabled.

• my wifi stopped working suddenly. It shows no available networks. However, another iphone is able to connect to the router. Help, please

  my wifi stopped working suddenly. It shows no available networks. However, another iphone is able to connect to the router. Help, please

  Hello

  1 have you made changes to your computer recently?

  2 are you able to access the Internet through an Ethernet cable?

  I suggest you to follow the steps in the link and check if it helps.

  Windows wireless and wired network connection problems

  I hope this helps.

• I can't able to connect to wireless internet.

  When windows starts, why my notebook showing your module not installed wireless / work properly?

  When I open computer (start), why my notebook showing, your module not installed wireless (701) / work properly? I can't able to connect to wireless internet.

  Hello

  ·           Were there any changes made to your computer before this problem?

  ·           It worked before?

  ·           Are you able to connect to the internet when you connected using an Ethernet cable?

  Step 1: Try the procedure described in the following article:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Not able to connect to the server via the AFN TCP

  Hi all

  After Googling carefully I finally decided to post my problem which is really sent me nightmares.

  In my application, I try to connect to a TCP server by using the operator of internet network and after the connection string

  URL = "socket: / /" + ip + ":" + port + ";" deviceside = true; connectionTimeout = 30000; APN =; tunnelauthusername =; tunnelauthpassword =; » ;

  I am able to connect to the internet using the phone's browser, but not able to connect to the TCP server via app.

  In my device APN authentication is disabled by default and the AFN, the name of user and password fields are white that's why I took these settings like white with a value in the connection string.

  When I try to connect via wifi network using the suite of string

  URL = "socket: / /" + ip + ":" + port + ";" deviceside = true; interface = wifi; connectionTimeout = 30000;

  I am able to connect to the server, but not in the case via the AFN.

  Please help me...

  I'm here just stuck and not finding a way out.

  Thank you

  Finally I found the solution to the problem...

  I used ConnectionFactory (network API) to connect to the TCP server and the used connection string is just

  'socket://127.0.0.1:8089 '.

  No need to specify the APN, user name, and password.

  Here's the code used

                   ConnectionFactory connFact = new ConnectionFactory();
                    ConnectionDescriptor connDesc;
                    connDesc = connFact.getConnection("socket://127.0.0.1:8087");
  

• I'm not able to open the properties and the State in Local (or all network devices) network. Actually I am not able to connect to the local area network connection in network and sharing Center.

  Connection to the local network - properties dialog box

  Hi, I'm not able to open the properties and the State in Local (or all network devices) network. Actually I am not able to connect to the local area network connection in network and sharing Center. But I can't access the Internet. My OS is Windows 7

  Hello Rajaneer,

  Is the computer that you are using a personal computer or a work computer?
  You will need to re - install your network card drivers like something was damaged and it prevents you to access the property:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Impossible to launch the store "we were not able to connect to the store.this could not have due server problem or the network connection has expired.

  Original title: PROBLEM WITH WINDOWS STORE

  Hi, I'm a first year student at IIT MADRAS. I just got a new laptop (W8, 4 GB RAM, 320 to drive HARD, I3). I had problems to open the store. He said: "we were not able to connect to the store.this could not have come because of problem with the server or the network connection timed out." My connection to the local network requires the proxy settings. PLEASE HELP ME.

  Hello

  Yes, the speed and connectivity of the internet must be consistent for the applications to work properly.

  I suggest you create a new user account and checkif the problem persists.

  Create a new user account.

  Setting up a new user account is a very easy process in Windows 8. There are two types of user accounts, a Microsoft user account and a Local user account. See this link for more information on the two types of user accounts and how to create them.

  http://Windows.Microsoft.com/en-us/Windows-8/create-user-account

  Try to connect with the user account that is having right of the administrator and check if the problem persists.

  I hope this helps. If you have any other questions, please get back to us and we would be happy to help you.

• Not able to connect to the user account, error: user profile Service has no logon

  I'm on a HP Pavilion dv7 with Windows 7.  I created a user account for my wife but she cannot open a session because of the messages "the user profile Service has no logon.  User profile cannot be loaded. »

  Where and how can I fix it?

  Thank you.

  Larry

  Original title: need help with setting up an account

  Hi Larry,
  Thanks for posting your query in Microsoft Community.

  From your description, it seems that you are not able to connect to the user account when you try to connect you get following error. The user profile Service has no logon

  This behavior can occur if the user profile was deleted manually using the command prompt or by using Windows Explorer. A profile that is manually deleted does not remove the security identifier (SID) of the list of profiles in the registry.

  If the SID is present, Windows will try to load the profile using the profile Image path that points to a nonexistent path. Therefore, the profile cannot be loaded.

  To resolve the problem with the user account, you can follow these steps:
  Method 1:
  (a) click Start, type regedit in the start search box, and then press ENTER.
  (b) search for, and then expand the following registry subkey:
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

  (c) right click the SID that you want to remove, and then click on remove.
  (d) log on to the computer and create a new profile.
  You can also check this link:
  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Important: The above section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Method 2: Also, see the steps in the following Microsoft article:

  (a) error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Note: We strongly advise against making it the standard way to remove the user profiles on computers. Documented and supported approach is using the system advanced settings in the system, "Profiles" settings properties For programs, it is available using the API 'delete profile '.

  If the SID is present, Windows will try to load the profile using the profile Image path that points to a nonexistent path. Therefore, the profile cannot be loaded.

  (b) how to back up and restore the registry in Windows
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  (c) IF you still have the problem then you can follow the link provided below to fix the damaged user profile.
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  For any Windows help in the future, feel free to contact us and we will be happy to help you.