Only part of the page copy

Similar Questions

• When I try to print a page, I get the entire page of very low, either I get only part of the page. Which setting I'm missing?

  I am trying to print a page of a web page. If I check, 'reduced to fit' print / page setup, I get the whole page but small enough to be useless. If I uncheck 'reduced to adjust', I get only about 1/3 of the page. I tried the % function, and it only changes the size of the narrow portion I see already. How to print the whole page in a reasonable size?

  If Firefox does not use the entire sheet of paper, it can result from Firefox after having extracted the Windows incorrect paper size settings when reading data from the print driver. Compensation it may involve conclusions some mask parameters, but here goes:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste print and make a pause so that the list is filtered

  (3) for each parameter which specifically mentions the problem printer, right click and reset The fastest way is to click with the mouse and press the r key on the keyboard with your other hand.

  Note: In a few discussions involving Brother printers, printer_printer_name.print_paper_data preference was established in 256 and when the user changed it to 1 which, in itself, solve the paper size. If you are using a Brother printer and see a 256 here, you can change the value by double-clicking it or by using the right click > modify.

  Any improvement?

• print only part of the page

  When I tray to print a page only the top quarter is printed.

  Hello

  Thanks for posting your question in the Microsoft Community forum.

  There can be several causes for print does not correctly, which are preventable with the proper tools and even preventable.

  Before we get this problem resolved, I'd appreciate it if you could answer the following questions.

  1. What is the brand and model of the printer?

  2. the problem occurs when printing with all documents?

  3 have there been recent changes to the computer before the show?

  Method 1: I suggest to check printing preferences and make sure you have the right to face-off.

  Choose the printing options: http://windows.microsoft.com/en-US/windows7/Choosing-print-options

  Go through the printer manual on how to change the printing preferences.

  Method 2: Printer in Windows problems.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• Printer prints only 3/4, last part of the page is faded.

  Whenever I have the impression that part of the page prints part background fades.

  Hello

  ·          What version of the operating system is running on your computer?

  ·          What is the number and model of the printer?

  ·          When the issue started?

  ·          It is not very good in the preview before printing?

  ·          Does the problem appear when you print a test page?

  The likely cause is a colour cartridge that is low on ink or is very old.  The color cartridge replacement should solve the problem.

• OfficeJet Officejet Pro 8500 has more eAiO Scan to computer scans only part of the Document

  I am trying to scan my Officejet Officejet Pro 8500 has more eAiO scan to my iMac (Mac OS X 10.6.8).) IT scans only part of the document is scanned. However, when I copy it, the entire document is printed. I was looking for, if I could change this on the officet, or the system of preferences on my mac, but couldn't find anything on the 8500. On mac, I could change something, but it was only the scans on insiders from my computer.

  Scanning directly from the Officejet comes in very handy when the digitization of books, with one hand, I have to push it and the iMac is not in reach of the officejet...

  Otherwise, I am very satisfied with the printer and everything works fine...

  Thanks for any help.

  iMac (Mac OS X 10.6.8)

  Hello

  I hope you feel better now!

  Please specify the exect option that you use to scan from the control panel of the device.

  What exect icon are you clicking after selecting the scam?

  If it is computer, try to update the latest version of the driver and check if the Scan shortcuts Manager do not appear:

  Click the Apple icon, then software updated. Be sure to select any update HP available.

  If you don't see the specific option yet, you will need to delete all HP software installed completely and install the latest version:

  * Please note that the following steps will delete all HP software installed.

  1. click on menu go (click the desktop, then watch the menu in the bar at the top of the page)
  2. Select Applications
  3 select the Hewlett-Packard folder
  4. double-click on uninstall HP application
  5 follow the uninstall to prompt to select a device to uninstall
  6. press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall
  7 approve any prompt to uninstall all HP software.

  Download and install the latest driver below:

  http://FTP.HP.com/pub/softlib/software11/COL34340/MP-85024-2/OJ_AIO_08_8500_A910_Net_Full_Mac_WW_74.dmg

  Finally, update the latest driver by clicking the Apple icon, then software updated.

  If you use another method of scan, please specify which option you use.

  Kind regards

  Shlomi

• Some parts of the page is cut when it goes to the next page.

  This page is the page that converted to PDF after submit button click on it
  According to the amount of text, put user in the form of entry
  < cfinclude template = "attributeinclude.cfm" >
  < cfinclude template = "attributeinclude2.cfm" >
  < cfinclude template = "attributeinclude3.cfm" >
  and
  the text box checked stretch to 2-3 pages pdf or limited to only the first page.
  
  The content of
  < cfinclude template = "content1.cfm" >
  < cfinclude template = "content2.cfm" >
  < cfinclude template = "content3.cfm" >
  < cfinclude template = "content4.cfm" >
  are sometimes cut in half
  My goal is to be together the < cfinclude template = "content1.cfm" > 2 and 3
  not forever Breal? If it remains on the first page, then it would be in the lower part of the page.
  If she goes to the second page, then it does not break. It also should go either on the home page if it is the only or the lower part of the page as well
  Thank you
  
  Don't know what I'm talking about yet, but help?
  Do I put this code and where?
  Here is the code
  
  Thank you
  

  A few notes:

  -Place the lines of code out of the cfdocument tag cfparam.

  -remove the link cfdocument tag. The link tag can only appear in the head section of the page.

  -remove the cfoutput tag. There is apparently no need;

  -remove the long comment lines . If you need break the document into sections, use the cfdocumentsection tag. A previous thread contains an example of the use of section tags and cfdocumentitem and cfdocumentsection feed page.

  said: You should consider installing Coldfusion MX 7 patches if you have not already done. One patch is for cfdocument text cut problems.

• HP 4700 only prints half the page

  HP 4700 only prints half the page

  Hello-

  Have you tried uninstalling and reinstalling the printer?

• Cursor jumps to another part of the page or the screen when you type

  Hello

  When you type on the keyboard of my laptop cursor will go to a random part of the page or the screen and keep tapping on what I already typed.

  I had this problem with a Dell Inspiron, and they provided a patch with has been for the Bios or the touchpad.

  Is this a common fault with the Toshiba. I've seen some messages referring to disable the touchpad. However I don't think that this is a solution to the problem and Toshiba should provide a fix.

  Does not at any time have my finger on the touchpad while I was seized.

  Hope that answers.

  Huw.

  Hello

  As Christopher said use FN + F9 key combination to disable the touchpad. If the problem persists you should contact the Service partner. I'm sure they have more experience with it.

  I use two models of laptops different and same happen to me. Not often, but sometimes.

• How can I make my view on my screen the entire page instead of just a part of the page

  How can I make my view on my screen the entire page instead of just a part of the page

  Hello

  This Microsoft Information should help you with your problem:

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

  See you soon.

• some parts of the page is missing

  OfficeJet 7310, Windows 7 64

  Just noticed a few days ago that my printer is not printing parts of the page.  The colors are very well and very good print photos.  The missing lines or parts of a line would be black or color and are missing.  Drivers and software are up-to-date and nothing of fact to make it.  Makes no sense but what is happening.  Any ideas?

  It turns out that the problem isn't with the Chrome browser.  Have referred the matter to them.  Thank you.  I'm glad that the problem isn't my printer.  Impossible to find one that prints as well.

• When clicked on a menu item is still done scroll to this part of the page but not properly noted in the menu more

  Today I opened my site in Muse to do some small updates and my head was completely broken, I have a header menu that uses the anchor points, and when clicked on a menu item is still made this part of the page-scroll but not correctly highlights the menu more.

  I also had a slideshow put in place to change each px 1100 scrolls, but who has stopped working completely.

  How did this happen without changing me anything? or I could go back to an old backup?

  It turns out all I had to do was reboot all and everything was fine, the program must just acted buggy

• CSS only works on the page and not in the css doc

  So I have the following code for the shadows: h3.a {text-shadow:-50px 50px white, 1px 1px #00F}.  I put it on my css doc which is connected to my page, but it does not appear.  then I put it in the top of the page, and then it appeared.  Why it only works on the page?

  I just passed something like that for a few hours yesterday and realized that I was not saving the page external .css real after adding new styles.

• When I go to print my email, only previews and printed part of the page.

  No matter what I choose, either by selecting all and I am trying to print the screen or hit print the current page, etc, it shows a half page on preview before printing and only prints half a page.

  Go to the configuration Page (in whatever program you use) and adjust the margins.  Then check in the preview before printing.  If you want to print out e-mail, then adjust the margins of Internet Explorer, that email using IE for its print settings.

  Steve

• When you print maps with directions from Google Maps, I can print only part of the directions.

  When I select print in Google maps and printing, the first page is the card belongs to the second page of directions and the third page is empty. I tried in Safari and it does not happen here - the map and directions of how printing which should. This began to happen in Firefox about two weeks ago. I tried to adjust the print settings in Firefox and I have also reset the print settings in topic: config. So far, nothing has worked. I use a HP OfficeJet Pro 8600 and I have not had similar problems in the past.

  Thank you!

  Unfortunately, Google has changed the layout of the page. He added a style rule to the list of instructions that 47 of Firefox are not pages, or in other words, Firefox keeps the direction together as a block list so that you can print as many this block gives on one page. The only way to work around this problem now is to 'hack' the page to override to this rule. If all goes well it will be fixed in a next version of Firefox.

  To hack the page, you will encounter a small script in the Web Console. If you find that you need to do it often, you could create a bookmarklet (a script attached to a bookmark) so it is a one-click operation.

  Non-reusable method

  (A) select this script all over and do a right click > copy:

  document.querySelector('div.widget-pane-section-listbox.widget-pane-section-listbox-root').style.display="block";

  Update:

  document.querySelector('div.section-listbox.section-listbox-root').style.display="block";

  (B) in the tab with the instructions to print page, open the Web Console of Firefox in the lower part of the tab by using one of the following methods:

  • CTRL + SHIFT + k
  • button '3-bar' menu > developer > Web Console
  • (menu bar) Tools > Web Developer > Web Console

  (C) click next to the circumflex accent (>) at the bottom of the Web Console and paste the script (Ctrl + v or right click > paste) and press ENTER to run it.

  (D) close the web console, using the little 'x' on the right end of the bar ad detective, Console, etc., or the hotkey Ctrl + Shift + i could do.

  If you go to preview before printing, you should now see the list over several pages normally. Success?

  Create a Bookmarklet

  A bookmarklet is a small script that you can save on your Favorites or bookmarks Menu, bar in a convenient place. Here's how to create that:

  (1) select the entire script, and then right-click > copy:

  javascript:void(document.querySelector('div.section-listbox.section-listbox-root').style.display="block");

  (2) a comfortable place on your bookmarks bar or Bookmarks Menu with the right mouse button and choose new bookmark

  (3) click the empty box next to location, and then paste the script

  (4) to assign a relevant name like GooMapPrint

  (5) click on the add a bookmark button

  To test, after loading the view 'print' instructions, click on the button. When you call in print preview mode, the steps should be paginated normally.

  (Some sites use a security policy content to prohibit external scripts to be applied. On these sites, bookmarklets don't work - but at least so far, Google does not only.)

• How pre-made only parts of the timeline or the selected clips?

  I move from Vegas Pro in Premiere Pro. In Las Vegas, you select a part of the timeline, and then press CTRL-B and that it makes this segment.

  First, you press on enter, but he does not pay attention to the selected clips, she makes just before the entire sequence.

  This would not be a big problem except that I'm managing projects that are long enough, with 20-30 sequences and sequences 20 or so nested in each project and I spend between about 18 different projects for a series of videos 23 or almost.

  These videos are already taxing my system resources with only a few minutes or so (referencing about 80 to 120 GB of the source footage), but my desktop computer is a little weak.

  The problem is that when I have pre-made a nested sequence and bring on the main timeline, I pre-rendered it * again * after the next series of adjustments (ie the color correction, transitions, etc). So, I have to do AGAIN when I copy it to another scenario for a similar project.

  Each time, it may take as long as 15 or 20 minutes (my graphics card is a nVidia GTX 560 Ti, there CUDA, but prem does not support a reason any).

  When my script main glitched out, forcing me to divide it into different projects, it took me almost 4 hours just to copy things up with another 20 minutes to load the file glitched.

  Then I had to go and pre-made everything new to work my edits in place.

  Even if everything is properly set up to 90%, I still have to wait for the entire sequence finish the pre-rendered.

  As above, in Vegas Pro, I simply select a part of the timeline and the sticks of pre-rendered to this area.

  I saw an article that said that you might create on edge and use it for rendering, but it doesn't seem to be something CS6.

  I heard that Adobe was trying to maintain CS6 as a parallel to CC thing. Surely I don't have to move to a subscription of 600 $par year just so that I can pre-made parts of the script as a low-end competitor program has had something like 5 years...?

  What Miss me? There must be a way to do it simply.

  You should uncheck the workspace toolbar in the Menu of the Panel (upper right corner), the timeline.