CSS only works on the page and not in the css doc

Similar Questions

• My navigation links on some pages and not on others. All bearings have a link page, in the master page.

  My navigation links on some pages and not on others. Only 2 of my 7 links work on the home page, 6 of the 7 work on another, and on other pages, they work. They are all together in the master and are linked to their corresponding page. No idea why?

  Layers. There is other content on top of your navigation. Even the transparent part of the other objects will block the mouse events to reach your NAV.

  At this point you probably just 'Layer 1' in the layers panel. Content on the layer 1 on the master page will always be behind the content on the layer 1 on the page to that master is applied.

  Create a 'layer 2' (which will be on top of the layer-1) and go to navigation. Now the navigation will be on top of the element on the layer 1 on your page and these elements will block are more mouse events to reach your NAV.

• Satellite A210 - 10 c only works with the 800 Mhz instead of 1.6 Ghz

  Hello

  I have a very big problem. One day, I look in Vista on my resource monitor and see that the max freuquence is only 50%.

  So first of all I think that is no problem because the assets 'energy savings' energy recorded.
  I have a Satellite A210 - 10 c portable.

  So I switch to maximum power and perform a test of prime95. But hell, the max freuquence has not changed. I also installed everest and cpu z, but all programs show the same to me:

  My laptop only works with the 800 Mhz instead of 1.6 Ghz!

  I'm looking for drivers for the AMD processor, but you need not for Vista. Update all the drivers of Toshiba and Programms and BIOS (in fact, it is the 1.9).

  Nothing helps.

  As a last test, I reinstalled Vista, but also did not help.

  And now I'm at a loss what to do.

  I hope someone can help me.

  Good bye...

  Have you installed the Vista using the recovery CD or the original CD of Microsoft Vista?

  I ask because the restore CD contains all drivers for Toshiba and yellow exclamation marks should not be apparently in Device Manager.

  If you used the original CD of Vista I think that you have not installed the Package of Intel Robson.

  I found the package of Robson on the Toshiba driver-> Satellite P200 area page.

  Maybe you should check this.

  Your comments would be appreciated

• HP Envy 120: HP Envy120 will scan only to JPEG files now and not of PDF files

  Since upgrading my Toshiba for Windows 10 laptop, now I can only scan in jPEG format and not in PDF format.  In addition, I am not given an opton to add pages.  It automatically scans a page only to JPEG

  On the HP scan simply press the + ADD big, Page.

• LabVIEW 2013 executable only works on the development machine?

  Hi all

  I created an executable to distribute my test software, but it only works on the development computer. With success, I gave my front executables with labview 2012 on the target computers by simply creating the .exe in the project and then Explorer in installing labview nessary drivers and run the engine of time without problems. Now, I created a new test with Labview 2013 program and I can not get my new test .exe application to run on the target computer. Has anyone seen this kind of problem before?  Any help will be appreciated.

  Thank you

  
  

• BlackBerry Z10 headphone only works with the left ear

  My headphones (beats studios) only works with the left ear when connected. The helmet has never had a problem on my old iPhone 4 and currently with my rMBP so I know that's not the headphones. Any suggestions?

  There seems to be a problem with the jacket of the head. They are defective for a few pieces and the jacket cannot recognize the HP in the same case, what makes the phone to give no sounds on the notification.

  Try to use different headphones. If the problem persists try replacing the model.

• Code works with Dreamweaver CS6 and not CC

  " < p > < a href =" javascript:void (0) "onclick =" window.open ('http://www.anything.comt', "'top = 20, left = 20, toolbar = 0, statusbar = 1, scrollbars = 1, resizable = 1')" title = "title" > name < /a > < /p > working with Dreamweaver CS6 and not CC

  
  

  [Edited the title and moved to Dreamweaver - JTS]
  

  I'm not sure I understand your point of view.

  I just tested the behavior of Dreamweaver CC open in browser window. It creates slightly different Dreamweaver CS6 code, but it works correctly. This is what is created in the HTML code:

  My http://www.adobe.com/ mywindow "," "," toolbar = Yes, location = Yes, status = Yes, menubar = Yes, ars scrollb = yes, resizable = yes') "> link"

  CC of Dreamweaver also adds the following code to theto the page:

  The MM_openBrWindow() function definition is necessary in thefor the code to work. But it really works OK.

  In regards to the _self and _blank not working do not, I find no problem with how Dreamweaver CC manages them.

  However, if you feel happier working with Dreamweaver CS6, you can download it from the following page:

  https://creative.Adobe.com/products/Dreamweaver

  Open the menu drop-down slot "in this version" and select next Dreamweaver CS6, as shown in the screenshot:

  

  With Dreamweaver CS6 selected, click the big button at the top right of the page download. You can download CS6 then install it alongside CC of Dreamweaver.

• The mouse only works in the active window and cannot select drop-down menus (W7)

  Hello

  I can't understand what is the cause. I can only select things in the active window with my mouse, I can't move the window, I can't click on anything whatsoever outside of it.

  ATM by writing this, I can not open another program or select the bar of tasks or do anything outside that window. (unless I use CTRL-ALT-DEL and force to select a new active window with my keyboard)

  Another thing is that everything works within the window, except one thing, menus drop down, I can bring up the menu drop-down but can not select anything on the menu.

  I reinstalled windows to do this same thing. I can't understand why windows doesn't let me choose some things outside my main window, it's that I'm sort of protected mode.

  Thanks for any help

  Hello

  -What is laptop or desktop?
  -What is the brand and model of the mouse? Is it wired or wireless mouse?
  -Have you tried plugging the mouse on another computer?
   
  Method 1: I would also say you update the drivers for the mouse on the computer and check if it helps.
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Method 2: Also, I suggest you use Microsoft Safety scanner to make sure that your computer is free from malware and check if it helps.
  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The Microsoft Safety Scanner is not a replacement for the use of antivirus software that offers continuous protection. For a real-time protection that helps you keep your home or small office PC against viruses, spyware and other malicious software, download Microsoft Security Essentials.
  Method 3: I suggest you try to check with the other mice to make sure that the problem is not with the computer.
   

  If it is a laptop, I suggest you to check if a FN key function is to to do this. As you are facing the issue after reinstalling the operating system, I also suggest you check with the manufacturer of the computer, if there is this key.

   

  Hope this information helps.

• Need a way to clear a form on the current page and not the entire form...

  IM new to Adobe Acrobat and worked on the conversion of some of our OmnForm 5.0 form PDF file, I've created a form that contains a button to clear the form.  It works very well!  Now, I created a template in the PDF of the current page and then created a button to spawn a new page of the model.  Creating the page works as well.  The only problem I have is that the clear form button clears the entire form.  I need the key to erase only the current page.

  I'm a relative newbie when it comes to script.  I can understand generally simple scripts when I see them, but to create new groupings still isn't my forte. HE's researching the resetForm method, but it seems that there is no option to move the current page to him? (As I said I am relatively new to java scripts).  If anyone has the directions on how to do it I would be very happy.

  You can use the code that I posted here: http://forums.adobe.com/message/4234483

• Form validation works on a page, but not the other...

  Hope someone can help with this.

  I have a page below with a load of contact forms that all work well:

  http://www.goodsafariguide.com/judges/judges.php

  I have corrected to re-create (it is true that for the most part by Save under...) same features here:

  http://www.goodsafariguide.com/AwardsSite/judges/

  They do not work when trampled in correctly, but there is a little problem with validation.

  Basically when you complete a form properly, the page reloads with accordion of the closed form. When you open it upwards, his watch the ugly error in the search at the top of the form.

  Any ideas what is causing to act like that, as opposed to the way it works in the first link?

  Thank you.

  Iain71 wrote:

  ....

  I have corrected to re-create (it is true that for the most part by Save under...) same features here:

  http://www.goodsafariguide.com/AwardsSite/judges/

  They do not work when trampled in correctly, but there is a little problem with validation.

  When you look at the source code, I emphasize that - unlike the first page - this a doesn´t contain all references to uninstall form validation libraries ("... / includes/tng/scripts/FormValidation.js"and"'... / includes/tng/scripts/FormValidation.js.php '), which means that the work of can´t of validation.

  See you soon,.

  Günter

• Firefox does not start, no error message, only works in the background

  I click on Firefox it does not start
  no error message it does not start
  It works in the background in 32-bit
  I have re installed it but nothing changes

  It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls
  • https://support.Mozilla.org/KB/fix-problems-connecting-websites-after-updating

• Preview only works if the time line is not visible

  I'm having a problem with preview.  My computer plays smoothly if the time line for this model is not visible.  I have to hit play then click the Render what tab or close the window of time line all together.   Why is this happening?

  Assuming you are using El Capitan, Dave is right. It is a known problem. It is listed on this page and a few other places as well. You have found a workaround. Another workaround solution found by the mofxtv user (in this thread) is docked to another court under your control panel mounting.

  Like this:

  

  Some people use other panels that they use less often.

• HLP? How do I set .oam to play on the tour of the page and not once all DPS is open?

  Hello

  I have a .oam file placed in a window but I = animation plays until the user gets to the correct page and I want to play once the viewer happens to the page, how do I do this?

  Thank you!

  The value of the seconds retard.125

• I had windows updates only 3 update 11 failed and not update, now I can't open my program files

  After starting to install windows updates failed only 3 including 11 installed has not tried again they now cannot access some programs include research on the windows desktop, Explorer windows, help and support, system information, disk cleanup, defrag the files, microft office, others I right click and click Properties find target then I get a message could not open the windows file install is not properly installed ,

  Your last two responses bring back us to 2 two things you posted yesterday (I had hoped we could avoid).

  In reverse...

  [#1] ... I received an error message when I booted my computer that says "cannot find componate RPS.exe. "AntiFr.dll was not trying to install again.

  Several years ago, before Verizon (or whatever your telephone company was called at the time) gave the suite McAfee customers, she gave another sequel on Proctection of Radialpoint Suite (AKA freedom Internet Security).

  The code snippet above tells me that the Radialpoint suite has been installed on your computer at somepoint in a past distant: files RPS. EXE and ANTIFR. DLL are 'leftovers' from Radialpoint Protection Suite (where letters RPS in the first file name).

  Speaking of the hard personal experience, I can tell you more about Radialpoint is about impossible to remove completely without manual editing of the registry - something you DO NOT want to do!

  And despite what the volunteer moderator McAfee Forums and communities (own KB of Radialpoint article) has to say, you do NOT want to download Microsoft's Windows Installer Cleanup utility now interrupted the quoted source not Microsoft !

  [#2] ... I installed Speedy [PC] Pro last week... every day since then, around 15:00 I get a message that says "cannot find c: Program file commune File\SpeedyPC Software\UUS3\UUS3.dll ' I click on close and she goes until the next day.

  Unfortunately, installation & with the Speedy PC Pro 'scareware' is no worse, Dennis. [It is called "scareware" because you have to buy this disreputable application ($34.95 USD, I heard last) until it 'fixed' anything.] [Of course, it won't fix a 'thing'!]  See this recent discussion, some-online http://answers.microsoft.com/en-us/windows/forum/windows_vista-security/who-are-speedy-pc-pro-and-are-they-safe-to-use/62629332-a670-4166-b418-e2a5a876daa1

  TIP: If you ever think that your registry database must be cleaned, repaired, boosted, point, healed, twisted, fixed, magnified, "swept" or optimized (it isn't), read http://aumha.NET/viewtopic.php?t=28099 and draw your own conclusions. See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

  If you had not used the Speedy PC Pro crapware, there is a very slim chance that you would be able to install the suite McAfee/Verizon again - at least according to McAfee Tier III Support Tech post on this page. But you don't have so there is nothing we can do about it now. [No, System Restore may not "come to the rescue" here.]

  => Let me level with you here: this set of the problem is due to have not entirely - remove the McAfee free version to test which is preinstalled on your computer, years BEFORE the installation of any antivirus application (for example, the suite of Radialpoint) AND BEFORE installation of Windows updates.

  Now the very bad new: the only way to return your computer to a functional & secure State is backup so your personal data (for example, the contents of the My Documents folder;) Favorites of IE; E-mail Client data) then format the hard drive and do a clean install of Windows XP (or buy a computer brand new Windows 7).

  Follow the instructions (to-the-letter & in order!) in this post of mine in another forum: http://aumha.net/viewtopic.php?f=62&t=44636

  If you need additional help with the new installation, start your own, new topic in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system

  If these procedures are outside your technique "comfort zone" - and there is no shame in admitting this isn't your cup of tea - take the computer to a local, reputable and a stand-alone computer (that is, not "BigBoxStoreUSA" or Geek Squad), repair shop & let them do the work.

  Note: The computer must NOT be connected to the internet or local networks (i.e. other computers) in its current state. All your personal data (e.g., banking online & passwords credit card) must be considered at risk, if not already compromised.

  I sincerely wish I had better news for you.  Good luck!

  =================================================================
  WARNING: Displayed AS IS without any warranty. MS MVPS represent or work for Microsoft

• Typeset only work on the platform built on the Web site

  Hello.

  I'm going to build a Web site that is currently on my development server. http://www.thepointnet.com/NovaTec-development

  I use a Typeset font (make-family: ' Fira without ";) in the CSS and it will only appear on the site when I view it on the same Mac as I build the site on.)

  Seen on a smart phone or on another PC it's just default the without police.

  I've lived any suggestions for troubleshooting Adobes does not.

  Someone at - it indexes?

  Thank you

  Joe

  Hey Joe,

  I'm sorry that you trouble with that. The CSS on your site uses the font family name "Fira without", for example

  {.navbar-css

  color: rgba (255, 255, 255, 1);

  do-family: ' Fira without. "

  do-size: 130%;

  make-style: normal;

  Police-weight: 300;

  }

  The name provided by Typekit is "fira - without", with a hyphen. The browser is looking for a locally installed version of the police currently, rather than the files provided by Typekit.

  If you update the CSS file to use "fira - without" everywhere that you have "Fira without", policies should begin to work in all browsers and operating systems.

  (For later use, you can check the last name of Typekit in the Editor Kit by clicking on the link "Fonts in CSS using" selectors):

  ( https://helpx.adobe.com/typekit/using/css-selectors.html)

  If please give that a try and let us know if you have any other questions!  Best,

  -liz