print only part of the page

Similar Questions

• When I try to print a page, I get the entire page of very low, either I get only part of the page. Which setting I'm missing?

  I am trying to print a page of a web page. If I check, 'reduced to fit' print / page setup, I get the whole page but small enough to be useless. If I uncheck 'reduced to adjust', I get only about 1/3 of the page. I tried the % function, and it only changes the size of the narrow portion I see already. How to print the whole page in a reasonable size?

  If Firefox does not use the entire sheet of paper, it can result from Firefox after having extracted the Windows incorrect paper size settings when reading data from the print driver. Compensation it may involve conclusions some mask parameters, but here goes:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste print and make a pause so that the list is filtered

  (3) for each parameter which specifically mentions the problem printer, right click and reset The fastest way is to click with the mouse and press the r key on the keyboard with your other hand.

  Note: In a few discussions involving Brother printers, printer_printer_name.print_paper_data preference was established in 256 and when the user changed it to 1 which, in itself, solve the paper size. If you are using a Brother printer and see a 256 here, you can change the value by double-clicking it or by using the right click > modify.

  Any improvement?

• Print only part of the Email

  I recently changed to Outlook of Live.com. I can now print only a part of an e-mail message because of the borders on each side. How can I get rid of them, or print the entire message?

  For the interface of Outlook:

  1. go to your Inbox

  2. Select the desired message you want to print

  3. in the top of the message itself, you can see options like New, Delete, Junk, response, etc..
  Please select the three dots (...) next to categories

  4. click on print

  5. a preview of the message is displayed and also printing options. (don't forget to click on "all pages" for multi page email.)

  Just click print.

  Dyami & Wanikiya
  The zig - zag team

• When you print maps with directions from Google Maps, I can print only part of the directions.

  When I select print in Google maps and printing, the first page is the card belongs to the second page of directions and the third page is empty. I tried in Safari and it does not happen here - the map and directions of how printing which should. This began to happen in Firefox about two weeks ago. I tried to adjust the print settings in Firefox and I have also reset the print settings in topic: config. So far, nothing has worked. I use a HP OfficeJet Pro 8600 and I have not had similar problems in the past.

  Thank you!

  Unfortunately, Google has changed the layout of the page. He added a style rule to the list of instructions that 47 of Firefox are not pages, or in other words, Firefox keeps the direction together as a block list so that you can print as many this block gives on one page. The only way to work around this problem now is to 'hack' the page to override to this rule. If all goes well it will be fixed in a next version of Firefox.

  To hack the page, you will encounter a small script in the Web Console. If you find that you need to do it often, you could create a bookmarklet (a script attached to a bookmark) so it is a one-click operation.

  Non-reusable method

  (A) select this script all over and do a right click > copy:

  document.querySelector('div.widget-pane-section-listbox.widget-pane-section-listbox-root').style.display="block";

  Update:

  document.querySelector('div.section-listbox.section-listbox-root').style.display="block";

  (B) in the tab with the instructions to print page, open the Web Console of Firefox in the lower part of the tab by using one of the following methods:

  • CTRL + SHIFT + k
  • button '3-bar' menu > developer > Web Console
  • (menu bar) Tools > Web Developer > Web Console

  (C) click next to the circumflex accent (>) at the bottom of the Web Console and paste the script (Ctrl + v or right click > paste) and press ENTER to run it.

  (D) close the web console, using the little 'x' on the right end of the bar ad detective, Console, etc., or the hotkey Ctrl + Shift + i could do.

  If you go to preview before printing, you should now see the list over several pages normally. Success?

  Create a Bookmarklet

  A bookmarklet is a small script that you can save on your Favorites or bookmarks Menu, bar in a convenient place. Here's how to create that:

  (1) select the entire script, and then right-click > copy:

  javascript:void(document.querySelector('div.section-listbox.section-listbox-root').style.display="block");

  (2) a comfortable place on your bookmarks bar or Bookmarks Menu with the right mouse button and choose new bookmark

  (3) click the empty box next to location, and then paste the script

  (4) to assign a relevant name like GooMapPrint

  (5) click on the add a bookmark button

  To test, after loading the view 'print' instructions, click on the button. When you call in print preview mode, the steps should be paginated normally.

  (Some sites use a security policy content to prohibit external scripts to be applied. On these sites, bookmarklets don't work - but at least so far, Google does not only.)

• Only part of the page copy

  Officejet 7500 has aid he will copy only about a quarter of the page.  If you check the preview it is all there, but even after that, it does print the page.  I have been scanning documents, save, then print and it's OK--a pain with multiple scans!  This only seems to happen when copying.

  I tried to re-boot PC and also completely unplug the printer, but nothing seems to work.  Occasionally, it copies 1 page, then back to only a part.  Sometimes she pushes through a blank page, then only prints one page of components.

  There are a lot of black ink, and the colors are about a quarter full.

  REALLY appreciate a solution to this.

  Thank you

  Hello

  From the Control Panel, click on the icon to copy, then click on the settings button.

  Check that resize defined as actual size.

  Also make sure that the paper size is set correctly.

  Locate all as new values by default, click Yes to confirm and try to copy again, you see no difference?

  If this is not the case, click on the configuration icon and select Tools, then select restore default settings, which should restore all copy the settings to their default values.

  Be aware that it can restore additional parameters, such as the fax settings to automatically answer after 5 rings, if you use the fax, please let me know your requirements (e.g. fax uses the same line as your phone, you have an answering machine or voice or no e-mail service, according to the present I will provide the steps to reconfigure the device properly to these requirements).

  Shlomi

• print only part of the screen

  On portable MYMAC OSX 10.9.5 I struggled with printing only a part of what on screen, what Miss me.

  Try the command - shift - 4.

  Screenshots

• PrintDataGrid of printing only half of the page

  Hello

  I have a print of my report with PrintDataGrid problem. I just copied and paste the sample code from this site form, but she seems to have a problem. Printing in the book is only half and jump to another page. rank 1-6 is on the first page and the rest is on the next page that was supposed to be on a single page. I am asking your help to find ways to print correctly.

  Here, I have the code:

  FormSalesTransaction.mxml

  <fx:Script>
            <![CDATA[
                 import mx.core.*
                      
                      // Declare and initialize the variables used in the component.
                      // The application sets the actual prodTotal value.
                 [Bindable]
                 public var pageNumber:Number = 1;
                 [Bindable]
                 public var prodTotal:Number = 0;
                 
                 // Control the page contents by selectively hiding the header and
                 // footer based on the page type.
                 public function showPage(pageType:String):void 
                 {
                      if(pageType == "first" || pageType == "middle") 
                      {
                           // Hide the footer.
                           footer.includeInLayout=false;
                           footer.visible = false;
                      }
                      if(pageType == "middle" || pageType == "last") 
                      {
                           // The header won't be used again; hide it.
                           header.includeInLayout=false;
                           header.visible = false;
                      }
                      if(pageType == "last") 
                      {
                           // Show the footer.
                           footer.includeInLayout=true;
                           footer.visible = true;
                      }
                      //Update the DataGrid layout to reflect the results.
                      validateNow();
                 }
            ]]>
       </fx:Script>
       
       <!-- The template for the printed page, 
       with the contents for all pages. -->
       <mx:VBox width="90%" horizontalAlign="left">
            <mx:Label text="Page {pageNumber}"/>
       </mx:VBox>
       <MyComp:FormPrintHeader id="header"/>
       
       <mx:PrintDataGrid id="myDataGrid" 
                             height="100%"
                             width="100%"
                             fontSize="7" 
                             wordWrap="true" 
                             variableRowHeight="true" 
                             fontFamily="Lucida Console" >
            <!-- Specify the columns to ensure that their order is correct. -->
            <mx:columns>
                 <mx:DataGridColumn headerText="Invoice" dataField="InvoiceNo" width="65"/>
                 <mx:DataGridColumn headerText="Customer" dataField="CustomerName" width="100"/>
                 <mx:DataGridColumn headerText="Model" dataField="ModelNo" width="70"/>
                 <mx:DataGridColumn headerText="Category" dataField="CategoryCode" width="70"/>          
                 <mx:DataGridColumn headerText="Price" dataField="Price" width="80"/>
                 <mx:DataGridColumn headerText="Qty" dataField="Quantity" width="35"/>                    
                 <mx:DataGridColumn headerText="Cash" dataField="Cash" width="80"/>
                 <mx:DataGridColumn headerText="Dollar" dataField="Dollar" width="80"/>
                 <mx:DataGridColumn headerText="Cr Card" dataField="CreditCard" width="80"/>
                 <mx:DataGridColumn headerText="B Share" dataField="Bankshare" width="80"/>
                 <mx:DataGridColumn headerText="W Tax" dataField="WTax" width="80"/>
                 <mx:DataGridColumn headerText="Lay Dep" dataField="LayawayDP" width="80"/>
                 <mx:DataGridColumn headerText="Lay Bal" dataField="LayawayBal" width="80"/>
                 <mx:DataGridColumn headerText="Check" dataField="Check" width="80"/>
                 <mx:DataGridColumn headerText="Misc" dataField="Misc" width="80"/>
                 <mx:DataGridColumn headerText="Remarks" dataField="Remarks"/>
                 <mx:DataGridColumn headerText="Lay Pay" dataField="LayawayPayment" width="80"/>
            </mx:columns>
       </mx:PrintDataGrid>
  

  and the way that I call Report.mxml:

  var printJob:FlexPrintJob = new FlexPrintJob();
                      
  if (printJob.start()) {
          var thePrintView:FormSalesTransaction = new FormSalesTransaction();
       addElement(thePrintView);
                           
       thePrintView.width=printJob.pageWidth;
       thePrintView.height=printJob.pageHeight;
                                               
       thePrintView.prodTotal = prodTotal;
                           
       thePrintView.myDataGrid.dataProvider = salesTransaction;
                           
       thePrintView.validateNow();
                           
       if(!thePrintView.myDataGrid.validNextPage)
       {
            thePrintView.showPage("single");
            printJob.addObject(thePrintView, FlexPrintJobScaleType.MATCH_WIDTH);
       }
       else
       {
            thePrintView.showPage("first");
            printJob.addObject(thePrintView, FlexPrintJobScaleType.MATCH_WIDTH);
            thePrintView.pageNumber++;
                                
            while(true)
            {
                 thePrintView.myDataGrid.nextPage();
                                     
                 thePrintView.showPage("last");  
                                     
                 if(!thePrintView.myDataGrid.validNextPage) 
                 {
                      printJob.addObject(thePrintView, FlexPrintJobScaleType.MATCH_WIDTH);
                      break;
                 }
                 else
                 {
                      thePrintView.showPage("middle");
                      printJob.addObject(thePrintView, FlexPrintJobScaleType.MATCH_WIDTH);
                      thePrintView.pageNumber++;
                 }
            }
       }
       removeElement(thePrintView);
  }          
  printJob.printAsBitmap = false;                    
  printJob.send();
  

  Here is the result when I print the report:

  

  I hope you have some time to help me.

  Thankz a lot.

  Can you check and see if the fact no difference if variableRowHeight attribute set to false?

  It looks like a problem of container.

• HP envy 4500 print only part of a page

  I have windows 7. I tried all of the solutions I've seen on this site. Had no chance. I tried wireless & usb. nothing works. a lot of wasted paper & ink trying to solve this problem. Help, please!

  Hi agnes3,

  If the same thing happens with the test page, it could be a mechanical failure of the rollers of the printer. Please, try the steps in this guide, an "out of paper" message.

  If this does not resolve the problem the printer will need to be repaired / replaced. Please contact HPtelephone support for further assistance. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Good luck!

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

• PIXMA MG5420 printer prints only part of the picture or document

  Try to print photos or documents becomes very frustrating - only a portion of the print job is being printed.

  Details of LAN on the printer are:

  • Connection: Active
  • Communication mode: Infrastructure
  • Channel: 1
  • Encryption: AES
  • WEP key length: inactive
  • Authentication: WPA2-PSK
  • Signal strength: 81%

  The printing machine is:

  Asus U52F laptop

  • 4 GB OF RAM
  • 64-bit operating system
  • Intel i5 - 2.53 GHz processor
  • Windows 7 Home Premium SP1

  Fast printing from applications such as MS Word 2010, Adobe PDF Reader XI and Cannon Menu

  Router, laptop and printer are all within 10-15 feet of each other on the same floor.  Any suggestions on how to solve this problem and prevent additional waste paper?

  If additional information is needed please let me know.  Much appreciated!

  Hello.

  Additional troubleshooting will be done to limit the cause of your problem. Please contact our support group using the link 'Contact us' below for further assistance.

  It has not responded to your question or problem? Find more help contact us.

• Printer prints only 3/4, last part of the page is faded.

  Whenever I have the impression that part of the page prints part background fades.

  Hello

  ·          What version of the operating system is running on your computer?

  ·          What is the number and model of the printer?

  ·          When the issue started?

  ·          It is not very good in the preview before printing?

  ·          Does the problem appear when you print a test page?

  The likely cause is a colour cartridge that is low on ink or is very old.  The color cartridge replacement should solve the problem.

• OfficeJet Pro 8600 Premium: When copying from the plateau the copier will print only 1/8 of page, then stop.

  Copier is towards the top sometimes & don't print that page of bucket 1/8, Athens he spits as if this one ends. Have unplugged the power cord & reconnected. Ran scans printhead & alignment. Off all night. All the ink levels are good. Still has not corrected it.

  Print an entire page of the screen of the computer without problem. Printing problem just go flat.

  Hi @Wendy-needshelp,.

  Thanks for joining the Forums of HP Support for a solution to your problem copying.

  I understand that you use a HP Officejet Pro 8600 Premium e-all-in-one with a computer and Windows 7 when you copy from sometimes flat it will only copy and print 1/8 of the page. I would like to help.

  You mentioned having unplugged and replugged the power cord. This is something that could be done. If you can, I reset the power and try to connect the printer directly to a wall outlet, if you currently use a protector or electrical surge extention. Sometimes the surge protectors can limit the amout of the power supplied to the printer.

  

  There was an update firmware released in April, which can help your printer. You can download the update of the firmware and run it from your computer to install it on the printer. You can go to the HP Officejet Pro 8600 N911g_n Firmware download page by clicking here.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• My printer prints only half of the document, even when I try to print a Test Page. Said troubleshooting that have no problem

  Original title: device: printer

  Dear Sir/Madam,

                      
  I am a user of windows from win98, and I never had a problem with the printer that I couldn't solve. But now, my printer prints only half of the document, and troubleshooting said: there is no problem, I printed the rpinter windows test page, but I only got half! in view of this, I wonder if you would be so kind as to send me the solution to my problem, my resources and understanding have exhausted. Thank you in anticipation of your kind cooperation.

  Hi Sergio,

  We would like to ask after the details with you to help you to come.

  (1) what is the brand and model of your computer?

  (2) don't you make changes to the printer settings prior to this problem?

  (3) is the issue limited to any particular document?

  (4) do you get an error when the printer is unable to print?

  You might face this question when the printer drivers are corrupt or if the Windows service does not work properly. Follow the troubleshooting methods listed below.

   

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  You can check the link below.

  Why can I not print?

  http://Windows.Microsoft.com/en-in/Windows7/why-cant-i-print

  Check the question and write us with the State of the question. We will help you if you need assistance.

• HP Deskjet 1000 printer - just changed the black cartridge for the first time and now it will only print first half of the page. Can anyone help

  HP Deskjet 1000 printer - just changed the black cartridge for the first time and now it will only print first half of the page.  Can anyone help

  Hello Gloria,.

  I ask you to execute methods in the following link and check if the problem is resolved.

  Solve printer problems

  You can also contact the manufacturer to find out how to clean the print head.

  http://h10025.www1.HP.com/ewfrf/wc/siteHome?cc=us&LC=en

  Please get back to us with the State of the question.

• OfficeJet Officejet Pro 8500 has more eAiO Scan to computer scans only part of the Document

  I am trying to scan my Officejet Officejet Pro 8500 has more eAiO scan to my iMac (Mac OS X 10.6.8).) IT scans only part of the document is scanned. However, when I copy it, the entire document is printed. I was looking for, if I could change this on the officet, or the system of preferences on my mac, but couldn't find anything on the 8500. On mac, I could change something, but it was only the scans on insiders from my computer.

  Scanning directly from the Officejet comes in very handy when the digitization of books, with one hand, I have to push it and the iMac is not in reach of the officejet...

  Otherwise, I am very satisfied with the printer and everything works fine...

  Thanks for any help.

  iMac (Mac OS X 10.6.8)

  Hello

  I hope you feel better now!

  Please specify the exect option that you use to scan from the control panel of the device.

  What exect icon are you clicking after selecting the scam?

  If it is computer, try to update the latest version of the driver and check if the Scan shortcuts Manager do not appear:

  Click the Apple icon, then software updated. Be sure to select any update HP available.

  If you don't see the specific option yet, you will need to delete all HP software installed completely and install the latest version:

  * Please note that the following steps will delete all HP software installed.

  1. click on menu go (click the desktop, then watch the menu in the bar at the top of the page)
  2. Select Applications
  3 select the Hewlett-Packard folder
  4. double-click on uninstall HP application
  5 follow the uninstall to prompt to select a device to uninstall
  6. press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall
  7 approve any prompt to uninstall all HP software.

  Download and install the latest driver below:

  http://FTP.HP.com/pub/softlib/software11/COL34340/MP-85024-2/OJ_AIO_08_8500_A910_Net_Full_Mac_WW_74.dmg

  Finally, update the latest driver by clicking the Apple icon, then software updated.

  If you use another method of scan, please specify which option you use.

  Kind regards

  Shlomi

• Firefox print previews each page in a series correctly but when I print only 1 of 3 pages it prints wrong.

  Firefox print previews each page in a series correctly but when I print only 1 of 3 pages it prints incorrectly, not seen in the preview before printing. I go to the specific page in the Print Range Pages box.
  and crossing point. IE 2 to 2 Pages.

  This has happened

  Each time Firefox opened

  == Always had problem

  What is the URL of the offending site?

  If you can not make it work with just one page, you can print to PDF first, then select your range to print from the PDF file.