Only specific index of reading

Similar Questions

• Reference specifications index page

  I am trying to create an index of the object using the Index marker type (using unstructure FM 12). The output should look like this (the image below was created using the type of marker 'Topic'; I need to use "Index" because it is what generates in the ePub output):

  
  

  

  However, when I generate using the marker Index type, I lose the blue text and the chapter number before the page number. From what I can tell, FM is somehow inserting < $pagenum > in the reference specification index page, although I've specified in there it should be < hyperlink > < $chapnum > - < $pagenum > < Defalut Para fonts >.

  Any ideas how I can get it to stop inserting the < $pagenum > in the reference page?

  Check the names of paratag (i.e. compare what FM created with you). FM will only add new entries if it does not find those corresponding to the levels used for Index markers. The paratags should all end up in "IX" when you use the marker "Index".

• Need to view daq reads per second but only to record a reading every 10 minutes. I would also like to record the date and time, at the same pace. Need help

  Need to show daq reads per second, but only to record a reading every 10 minutes, need help

  You are also looking to taste to 1 Hz data acquisition?

  My approach would be to use the DAQ acquisition to time your loop display reading each acquisition, then use the loop counter to control the logic of your writing to file.  For 1 Hz and 10 minutes write I would use 'quotient and remainder' I / 600; If rest = 0, then write the data point.

  For the date and time, under Calendar palette use the time get in seconds food a DateTime Format to a string.

• Cannot modify only directory attributes of reading, all the readers all the directories.

  Original title: cannot modify only directory attributes of reading, all the readers all the direcotries.

  For some reason now all directories are read-only. I have a check only reading tab, it goes through the process of change in all files in the subdirectory (I put their scrolling), click ok. But when I go in the directory again that reading is only check again. It is on my C: dirve all directories and all the other readers, including empty directories. Any suggestion would be appreciated. Thank you
  Bit defender shows no problem.
  SdS49r

  Hi SdS49r,

  I would like to ask you a few questions to better understand:

  (a) you connected to the administrator account? because you do not have the \n(Assurez-vous if you are not in the administrator account

  (b) don't you make changes on the computer?

  (c) have you created the file read-only?

  (d) what message do you get while changing the read-only attribute?

  (e) have you been able to change the attributes previously in your computer?

  You can scan your computer, then follow the steps in the link: http://www.microsoft.com/Security_Essentials/

  Try the system restore, it restores the computer to its point earlier while it was working fine.

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  
  Hope this information helped!

  Thank you, and in what concerns:

  Aziz Nadeem - Microsoft technical support.
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• I have Acrobat Standard XI and recently downloaded CD Player for a specific use. Reader became my default for open PDF files once it has been installed. How can I get Acrobat Standard to be once more my fault?

  I have Acrobat Standard XI and recently downloaded CD Player for a specific use. Reader became my default for open PDF files once it has been installed. How can I get Acrobat Standard to be once more my fault?

  Hi nancye22519208 ,

  Please right-click on any PDF on your system, then go to properties > under general, you will find "opens with". Here you will see 'change' option, by clicking on it, wil give you a window from which you can choose the Acrobat Standard XI as a default for PDF files.

  Kind regards

  Christian

• I bought Adobe Acrobat Standard DC with a new computer and only got the Adobe Reader software.  How can I get the software I purchased?

  I bought Adobe Acrobat Standard DC with a new computer and only got the Adobe Reader software.  How can I get the software I purchased?

  Hi debc6197,

  Download Acrobat Standard DC following the steps in this document KB, download and install Adobe Acrobat DC if it is a subscription (make sure that you are connected using the Adobe ID, in which you have a subscription for Acrobat Standard DC.) or if it is a perpetual license download using this link Download Adobe Acrobat products. Standard, Pro | DC, XI, X

  Kind regards
  Nicos

• Hello, we want to know if we can change our creative cloud for the only diet plan (for Adobe Photoshop and Illustrator, only), because when we read it, we but that we can only take one of them. Thanks in advance.

  Hello, we want to know if we can change our creative cloud for the only diet plan (for Adobe Photoshop and Illustrator, only), because when we read it, we but that we can only take one of them. Thanks in advance.

  Yes, you can change your plan.

  Also, IF the change is not possible, you can cancel and buy again.

  Please contact support by calling/chat for cancellation requests and billing queries:

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  You can also check the help below document:

  https://helpx.Adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

  Please go through the Adobe - General conditions of subscription as well.

• Lightroom Mobile - share only specific photos using "collection of web sharing?

  Since Lightroom Mobile (without returning to the desktop application), is possible to share only specific pictures within a collection using the feature "collection of web sharing?

  For example, what I might share only 5 star rated photos? I want to be able to continue to edit a few photos of the same collection without sharing them. So just remove them from the shared collection are not a solution.

  A workaround might be to duplicate the collection as a new collection, allowing me to remove the pictures of the collection shared without losing the ability to edit shared photos. However, I do not think that this can be done in Lightroom Mobile either.

  What are my options?

  Alternatively, you can login to your lightroom.adobe.com account where sharing options allow you to share photos after the indicators of choice.

• How to add text/solid/shape at specific index?

  Hello, is it possible to add shape/text/solid to a specific index in a publication? As for example a publication has 5 layers and I want to add a solid to index 3 rather than at the beginning layers as it does by default. The definition of solid ID after I added it does not work, because as its readOnly.

  As much as I know there is no way to change the index while creating a layer.

  Look in >. Page.87, there are a 4 methods to meet your need once the layer is created.

  App.Project.Item (index). Layer (index) .moveToBeginning ();

  App.Project.Item (index). Layer (index) .moveToEnd ();

  App.Project.Item (index). Layer (index). MoveBefore (targetLayer); targetLayer is an AVLayer object, then you should try this way: targetLayer = app.project.activeItem.layer (index);

  App.Project.Item (index). Layer (index). MoveAfter (targetLayer);

  I almost forgot that the script can use app.executeCommand (app.findMenuCommandId ("shape layer")); to add a shape layer just above your selectedLayers. I don't remember, but maybe that this feature is supported after AE CS6

• Export only specific data from PDF to Excel

  Hello

  I am trying to find a way to export only specific fields of a PDF file to an Excel sheet.  I have dozens of tax returns from various companies.  When I export the PDF at the same time, it does not transfer somehow able to use without manually moving a bunch of things around.  I work with statements of income from oil and gas wells.  Therefore, the goal is to put the name in a column, quantity produced in another, the price sold to another, etc..  However, as I said, the statements are not put in place in a way that transfers on in this format.  It would be ideal if I could choose the columns in the PDF file transfer via and in what format I choose.  In many cases, I have a PDF different for each month that I could merge into a single document, if I need to.  Any help would be greatly appreciated.

  It is possible to do, but it takes using a script. You can do this by using the command export form integrated data.

• Read only specific byte

  I have a continuous flow of incoming data through my serial port. Basically I want to Labview to wait for the '08' byte to arrive to the serial port and then read this and the two following bytes.

  The problem is that I have no idea how to do to isolate this specific section of bytes from a stream of continuous data. It does not appear on a regular basis (only when an event occurs on the device), and I have to be able to read it seems (not only the first time) every time.

  I have used the VISA read / write process before, but never for something like that, and I'm really at a loss. Any help would be much appreciated.

  Brian

  You could configure byte 08 as a character of endpoint and activate the termination characters.  Read a large number of bytes.  The reading will be either timeout, acquire the large numbers of bytes, or return to what she received up to and including the 08.  Now, if you want to read a specific number of bytes after that, then a reading of this number of bytes.

  Probably best is to simply read the serial port at all times and search for byte 08 that may appear in the string and to analyze the data accordingly based on the place where 08 occurs.

• specific line of reading a file

  is there a VI to read a specific line of a csv file. I have a csv file that is too large to load and unfortunately whlle spreadsheet file reading, is useful in some cases, you can not specify which row to start from, it can begin in the first line.

  I saw a lot of other suggestions on recent discussions, but none of them are a convincing solution.

  It is absolutely wrong to say that reading worksheet cannot begin until the first line. There is an entry called 'start reading offset '.

  Reading in blocks is to use this with a shift register. For example, if you wanted to read 1000 rows at a time, you must specify that the number of lines to read and the release of 'brand after reading' would be connected to a shift to the right and left, register wired to the "start of playback. The shift register may be initialized to 0.

• How can I download only specific folders in the source email online

  For example, I want to only download from my gmail Inbox, not every file I have on gmail.

  For example, I want to only download from my gmail Inbox, not every file I have on gmail.

  GMail offers two separate protocols for downloading mail from your account on the GMail - IMAP and POP3 server

  IMAP - replicate all folders and messages on the web interface in your local email client

  POP3 - only download messages from your Gmail account Inbox

  Instructions to set up the two are available in the Gmail Help Center

  http://mail.Google.com/support/bin/answer.py?hl=en&answer=13287

  Note: When you use Pop3, a copy of the message is downloaded to your client local Inbox and the copy of the message on the server is placed in the trash folder / deleted unless the local email client is configured to 'leave messages on the server. Gmail offers some additional options available in the e-mail configuration settings section "' transfer and POP/IMAP/when Messages are accessed through POP" "

  -Keep copy of Gmail in the Inbox, Mark Gmail like reading copy, copy of Gmail Archive, copy to remove Gmail. The last element will place the original message from the Inbox folder of Gmail trash and is emptied after 30 days.

  .. .Winston

  MSFT MVP Mail

• DVD-R discs play only on internal burner/reader of DVD that was used to create the disc?

  Hello

  This is the DVD-R that I created will not play on my Player DVD TV Philips standard or any other DVD player other than the one used to create the floppy disks?  I tried to lower the record speed of Windows DVD Maker, Cyberlink Power Director, and Nero 11 and all have the same issue?  I can only read my disks on HP laptop DVD drive?  The discs I used are:

  Philips DVD - R 4.7 GB 1-16 X
  Memorex DVD - R 4.7 GB 16 X

  My old Windows XP machine has no problems burning these discs and they play back well on Player DVD TV Philips and all players with my friends.

  This problem is driving me crazy! This is a 1 year HP Pavilion dv9000 with built in DVD/Blue Ray recorder. It runs 64-bit Vista Home Premium computer. All Windows updates are made and there are zero viruses and malware.

  Any help would be appreciated!

  Mark

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD

  Read the info above about the correct format to burn in.

  Burn a disc using the ISO image format

  Choose the size of the ISO image when you need a highly compatible disc that will play in computers with an older version of Windows or in devices such as CD and DVD players that can play video files and music digital. For more information about choosing a disc format, see which CD or DVD format should I use?

  See you soon.

  Mick Murphy - Microsoft partner

• I am curious about OEM vs. retail and retail sales are expensive but OEM work on any pc or only specific PC

  I have a question for OEM, my computer is a HP pavilion ze2000 since 2004 there windows 10 pro about it right now but it has not enabled which means no product key so im going to buy sp1 windows 7 pro 32 bit from a seller on amazon called MC OUTLETS:

  http://www.Amazon.com/GP/AW/d/B014E4FBCO/ref=mp_s_a_1_13?QID=1461169711&SR=8-13&PI=AC_SX236_SY340_QL65&keywords=Windows+7

  and I don't know if I should buy the OEM because one seller sells me is maybe not for my brand of pc and I want to be sure what im buy so I don't waste money, buy windows 7 which can be for lets say dell and I have a hp so I don't get stuck with the purchase of this product just to get the product key , so I can reinstall windows 10 must be enabled. And please don't tell me to buy the commercial version because I do a lot of cash right now I can only which means that ONLY afford OEM please tell if this seller is legitimate and if this product would work on my brand of pc which is a HP pavilion ze2000

  I wouldn't recommend that you buy from a dealer, especially the amazon market place.

  Because Windows 7 is in limited stock because Microsoft ended sales in October 2013, this created demand due to its rarity. This means the retail boxed copies request a bonus, while the OEM System Builder copies remain affordable.

  Full version (retail):

  -Includes the rights of transfer to another computer.

  -Does not require a qualifying earlier version of Windows.

  -Expensive

  Upgrade version (detail):

  -Includes the rights of transfer to another computer.

  -require a qualifying earlier version of Windows.

  -Expensive, but less expensive full version

  OEM System Builder version:

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  There is nothing wrong to use it too, especially that all future versions of Windows will be full versions.

  You can find software OEM System Builder of dozens of online merchants. The current price for OEM Windows 7 Professional Newegg, for example, is $ 140. When I checked a few minutes ago, Amazon offered packages OEM Windows 7 Professional from several vendors at prices ranging from $ 101 to $ 150. When I checked earlier, a package specifically designed for reconditioned PCs cost only $ 50 for a 64-bit copy.

  There is no technical limitation to prevent you from using OEM software on your computer, although this software only works for a clean install, not an upgrade. In the past, Microsoft has been remarkably inconsistent in his advice to clients on the question of whether this practice is allowed. (See "is allowed to use Windows OEM on your own PC? Don't ask Microsoft. »)