Only the High Performance Mode which Avaible

Similar Questions

• Why only the high-end TVs have 3D models active 70 inches and above?

  How is it that only the more 70-inch models have active 3D and all the rest of the TV UHD enough passive my tv 55 inches a passive and I don't see much 3D that I use when I got a samsung 50 inch tv that had assets that gave 3D better since it is active.

  Hello USER 933751.

  Native means that the film was under control or it was made originally as a 3D movie. If the film was not controlled in 3D, it will be not as good as the original 3D.

• Question about the MAXIMUM PERFORMANCE mode

  An excerpt of the ML note: 239100.1
  
  

  To participate in maximum performance the following requirements must be met:
  
      Redo Archival Process : LGWR or ARCH
      Network Transmission mode : ASYNC when using LGWR only 
      Disk Write Option : NOAFFIRM
      Standby Redo Logs : No, but recommended and required for Real-Time Apply   

  What is

  Standby Redo Logs : No

  What means? Cannot create a database without Online redo logs. Right?

  Standby Redo Logs are not the same as online newspapers. They are used only in the role of Eve (by RFS background process) to allow primary LGWR.
  You always want to create them regardless of the level of protection. They are (in theory) an option with Max Performance.

  Kind regards
  Uwe Hesse

  http://uhesse.WordPress.com

• Is it possible to return the largest (highest) value in a range of values (not only the higher of the two values)?

  HI -.

  waiting for the Maximum()< x >, < y >) function to have the ability to determine the largest more of two values.

  EG - Maximum()< x > < y >, < z >)

  Is there another way to do this (without a custom function)?

  Thank you, James.

  With independent attributes (i.e. X, Y and Z are not the values of the attribute even through a set of entities), each attribute must be explicitly referenced and the simplest solution is to nest calls to competition.
  For example: Maximum (, Maximum (,))

  Do the same with an arbitrary number of values of attributes associated with the same entity (i.e. 'age in years' as an attribute of 'person') you can use the InstanceMaximum or equivalents of natural language that returns more high/more recent value of an attribute from entity level all instances of the entity.

  InstanceMaximum (, )

  who is the most recent for all [of]

  who is the greatest for all [of]

  last of all for

  the largest of for (all of | all | )

  There are also the following to constrain the set of instances of entity to a subset based on a condition and get the most out of this subset (i.e. ' age where the person is a woman')

  InstanceMaximumIf (, , )

  who is the most recent for all [of] for which it is true that

  who is the greatest for all [of] for which it is true that

  the largest of for (all of | all | ) for which it is true that

  
  

  A similar feature exists for at least and the sum.  See the Guide to political use of automation for details and examples.
  

• Switchable graphics or in the power saving mode by default

  So, I'm having some not if funny issues with first pro. Today, while trying to edit a video, I noticed that, while trying to read anything in the timeline panel, audio would be read only, and the video in the window of reference would update only after I stopped the video. I use a Samsung series 7 times with AMD Radeon HD 8770 M graphics card and a GPU of 4000 Intell. The problem is when I go in Center of Catalyst to change settings, it is locked on the energy saving mode. I went and changed the name of the executable file for Adobe Premiere Pro CS6, which then allowed me to pass the program in high performance mode, but the same effect was still present. After a lot of research on the forums, I came across an adobe representative who suggested to try opening GPUSniffer in the directory Adobe\Adobe first Pro CS6\. and he ran. This is the screenshot I got when running it in command prompt, so my question is, does it perform a work around? Originally, when I bought this laptop 2 years ago, I have used the first pro without any problems like that. Yes, I would get occasional lag from time to time when there was a lot of effects and things to display in the timeline panel, but it was never as bad, until I had to change the hard drive due to a hard drive failure. The only thing different on this laptop is now than the hard drive itself, which has 1 TB more than the previous. It is still a samsung, and I can assure any and all other programs (which I use) that use graphics cards, use the AMD Radeon HD M 8770. First seems to be the only adobe with this problem product.

  Ridicule me. I found the solution. When I went to open a display window for which was planned on the timeline, I opened the resource monitor, instead of the program window: sequence. When I open program: sequence, the video would be read very well. Thanks for your time, will hide in the nearest corner.

• When using gpu high performance my laptop screen goes black and white

  HP Touchsmart TM2-1010ea

  Windows 7 64 bit

  recently updated to AVG, nothing of other news.

  When I use the high-performance GPU the laptop screen going black and white, still functional. When you use two screens, the second screen is in color, while the laptop is in black and white. using the screen of the laptop power saving GPU is again in color.

  Hello mcbethtings:

  Welcome to Hp forum. Your question is not in the list. http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=56801&tmp_task=solveCategory&CC=UK&DLC=en&lang=en&LC=en&product=4100044 So, in this case I sujest a restore back to remove what are the mistakes caused by a bad AVG update. GoTo all programs search and type in Recovery Manager click that above and open it. Click Yes (white box) so it apears. Select Microsoft System Restore Click next to three windows now you will see a list of dates, select a date prior to the installation of the update, then click. Let the computer do its restoration. Once done see if your problem is solved, if so try the update again, make you that the update is for 64-bit Windows 7 computers before you download it again. If that happens again once you know what AVG is not compatible for your computer.

  Probably you have only received part of the witch update caused this problem due to the disruption of atmospheres. Sometimes this happens. Put day of my HP only made once. I just did a restore back and downloaded the update again and the second time through work. Please click on Bravo if this solves your problem. Thank you frrw.

• Device Manager does not detect the gpu performance

  Hello everyone, I've had my laptop for a couple of years now. He is currently the normal edition of HP Envy 17 t - 2100. A time back well before this problem I had to re - install windows 7 and of course while I downloaded all the drivers. I was still not able to download the switchable graphics driver / program. I don't know if this is related to the issue or not.

  The MAIN question, I though, is that my laptop no longer recognizes the high performance GPU (AMD Radeon 6850 M). I tried to install the drivers, uninstalling and reinstalling again. But no luck. If someone can point me in the right direction or has any idea what I can do, I would be very gratefull!

  Hi JoshSa,

  Thank you for visiting the Forums HP's Support and welcome. I read your son on your t-2100 HP Envy 17 laptop and graphics problems. Here is a link to your driver and software for graphic design. Download presents first and then uninstall what you have within you the graphics drivers in Device Manager.

  I hope this helps.

  Thank you.

• Windows 8 is blocked in high contrast mode

  I just installed my new Windows 8 a few days back and accidentally activated the high-contrast mode. Now no matter what I can not I go back? Is anyone else having the same trouble? When I go in the settings of your laptop, it allows me to change the setting ON / OFF, scroll bar, but nothing happens.

  I rebooted several times, changing these settings PC these many times but zilch! He's stuck in high contrast mode.

  What should I do? any help/advice would be much appreciated.

  Thank you!
  Mandar

  I came up with a solution to your problem.  I accidentally clicked and turned on at high contrast.  When I clicked to stop, nothing has changed.  I went online to chat with a Microsoft representative online.  A man has remote controlled my computer to solve the problem.  I know what to do.  Go to your home page, then click Desktop.  Once you get to your office, to the RIGHT, CLICK on the screen.  A small box opens to the right of the needle.  Click CUSTOMIZE.  Then click on the theme of WINDOWS under the windows 3 default themes.  You must click on the one with the flower top.  Turn off you high contrast

  Nathan McCloskey

• Enterprise Edition High Performance - cost for PDB?

  The data Cloud price page shows that the High Performance of Enterprise Edition includes the shared Option.

  Simple question - there seems to be a cost flat no matter how much DPS, I create - is that correct?

  This sounds different if you use several tenant on prem - where there is a marginal cost by APB.

  I have searched but can't find any (final) clarification on the question of if the EE HP option allows you to create additional free of charge PDB.

  Thank you

  John

  You can create all the PDBs your little heart desires...

• A SQL server management studio 2012 error: PERCENTILE_DISC function is not allowed in the current compatibility mode. It can only in mode 110 or higher.

  Our company just upgraded to SQL Server Management Studio 2012 and it has been very useful because I needed to use the percentile for the code I wrote. As a first step, the function did not work because I set the compatibility mode 110 level. After that I did, the function worked. However, now it does not work yet, and I get the same error:

  The PERCENTILE_DISC function is not allowed in the current compatibility mode. It can only in mode 110 or higher.

  I went to the properties of database section, then options and noticed that the compatibility mode has not changed, it is set to "SQL Server 2012 (110). I even used the following code to see if that would help at all even if the compatibility mode is already on this mode:

  ALTER DATABASE Analytics
  SET COMPATIBILITY_LEVEL = 110 
  

  Someone already had this problem or knows if I need to change something in the properties of database for this function work? Is this just a bug in the new version?

  Hello

  I suggest you post this question in the SQL Server 2012 TechNet Forums: http://social.technet.microsoft.com/Forums/en-us/category/sqlserver

  Thank you.

• Equium A300D died in mode high performance.

  Hi I need some advice on my laptop.

  It only works in power saving mode in the power options menu.
  I thought it was due to overheating at first, but it works throughout the day when it's on standby under vista power option.

  When I start it in the morning, and then select high performance or balanced in the power options menu it turns off within 2 minutes.

  PLEASE HELP IT IS DRIVING ME CRAZY!

  Kind regards

  Alex King

  Hello

  I think that the problem of overheating
  The CPU and the GPU would go to high performance using high-performance power management settings and would create a dissipation of the heat, which would increase the temperature

  You use the latest version of the BIOS?
  Please check this!
  Cooling modules are controlled by the BIOS maybe you need an update

• the computer restarts on startup and then only works in safe mode

  I'm running out of options.

  I have a MSI all in one pc which runs on windows vista Basic. I turn on my computer and it will show my lock screen, but just before I can type my password, it restarts itself and give me different options of safe mode. I tried a lot of different solutions, but none of them seem to work. Can anyone help me, please.

  Hello

  See if that helps you.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode (which you already know)

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  See you soon.

• Even with safe mode Windows 7 error "Windows Explorer has stopped working". Screen is blank with only the specified cursor.

  Using Win 7 Home 64 bit:
  After the connection, I get "Windows Explorer has stopped working" its InPageError says in details
  Auto check solution online does not come to the top with a solution
  the screen is black nothing happens.

  I opened in safe mode, same problem.

  the only thing I can do is ctrl/alt/del and open Task Manager. When I tried to open the new task... Task Manager stopped working

  Request of guid, how to solve this problem. The problem started last night.

  The laptop is Lenovo G550
  Operating system: Win 7 64-bit service pack 1 - home edition

  I can email a screenshot is necessary for the InPageError
  Error state code: c0000185
  Type of media loopholes: 00000003
  OS Version:6.1.7601.2.1.0.768.3
  Locale ID: 1033
  More information 1:c785
  More information 2:c785ae48d9bd3e84e80fe64557c132ac
  Information additional 03:58 d 5
  More information 4:58d5c6fbf156506f476a5bd1fc86cfbf

  Hello

  This problem may be due to one of the following problems:

  • You are using an outdated or corrupted video driver
  • System files on your PC can be damaged or do not correspond with other files
  • You may have an infection of viruses or malware on your PC
  • Some applications or services that are running on your computer may be responsible for Windows Explorer to stop working

  Try the following steps:

  Method 1:

  Try the steps of error: Windows Explorer has stopped working

  Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Important: the data available on bad sectors may be lost when chkdsk attempts to repair your hard drive.

  Note:

  Ignore them perform a upgrade in Place the link above.

  Also ignore the safe mode and clean boot.

  Method 2:

  We will try to start the computer in mode low resolution and check the status of the issue.

  Low resolution starts Windows using your current video driver, and using the parameters of frequency low resolution and refresh. You can use this mode to reset your display settings.

  Refer to the section:

  Turn on the video resolution (640 × 480)

  You can also check: why is my screen black when I start Windows 7?

  Registry warning: the following steps include changing the system registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article:

  Backup and restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/backup-and-restore

  It will be useful.

• My new sites pinned tab only display full-screen mode. What happened only since the update of Firefox.

  I have my best sites 'pinned' to the new tab. Since the update of Firefox do show that the first four sites (top line) and I can't drag/release those missing bookmarks.

  I have just discovered that the sites are still there but only appear when I select the mode "full screen".

  Is there a way I can restore the page to show two lines of pinned sites without being full screen mode please?

  It seems that there is a regression with 39 Firefox on the new tab page. A bug report has been filed on 4 and the triage team responded.

  I saw the same thing with the difference in mode full-screen during the test of this "change"; the 'missing' line appear in full-screen - but with the resolution of my screen, I could see two rows of tiles, the 3rd rank was not missing mode full screen.

  Overall, I think you should try the new tab extension tools and see how you like it.
  https://addons.Mozilla.org/en-us/Firefox/addon/new-tab-tools/

  I use that in a number of my Firefox profiles. Profile where I checked this problem which has been mentioned in a number of discussions of the forum over the weekend that I use rarely - I use it see how Firefox works as "installed", before making a change.

• Satellite A210-16F - cannot switch to "standby" mode if I have the performance mode

  On my Toshiba Satellite A210-16F glitch:

  When I high performance on laptop it does not fall aspleep. But when I have Power saving mode then all is good. He aspleep to fall. Do you know how is it behaves?

  Where is the problem?

  Great news, buddy! :)