LSI20320IE + PV124T (LTO3) + Win2008R2 + PE2950III

Similar Questions

• PV124T and 2012 Windows

  It is possible to get a PV124T LTO5 works under Windows 2012?

  Note that Windows native backup software ' no longer supports tape drives, you don't need to buy a backup software solution that supports Windows 2012 and the band of readers to use your PV124T.

• PE1800 and PV110T LTO3 - ultra-lente performance

  Hello world

  I use the linux tar to back up data to a tape, LTO3 PowerVault 100t (several files about 5 GB each, every day a total of nearly 160 GB).
  The problem is that the tape is slaughter starts every 5-6 seconds, I think that's what you call "Shiners", and the data rate is subject (please, no kidding!) only 2 MB/sec!

  The source of data is a RAID 5 with 4 statement SCSI drives:
  # hdparm-t/dev/sdb
  / dev/sdb:
  Calendar of the disc in the buffer reads: 306 MB in 3.57 seconds = 85,61 MB / sec

  The server is a PowerEdge 1800, dual Intel Xeon 3.0 GHz, 2 GB RAM

  Operating system
  Name: Linux
  Version: Kernel 2.6.18 - 53.1.13.el5 (i686)

  SLOT5-slot
  Adapter: PERC 4/DC
  Type: PCI X
  Data Bus width: 64 Bits
  Speed: [not obtained, see the documentation for the card]
  Slot length: Long
  Supply voltage: 3.3 v

  BIOS information
  Manufacturer: Dell Inc..
  Version: A07
  Release date: 29/09/2006

  Someone at - it had the same problem? I've seen on this forum that others have this problem but they where using different controllers SCSI (Adaptec) and their operating system is Windows Server 2003.

  Thank you all!
  Leonardo

  
  

• Win2008R2 domain controllers; Restart the domain controllers disconnects the client

  * Original title: DC reboot causes disconnection of the clinets

  We have 2 controllers Doamin of Win2008R2. When a domain controller restarts, all the APs on some clients (Telnet, MSTSC ex...) Win7 will cut soon. There is no error/kingdoms fighters on the client event log. WinXP will never suffer.

  What can I do? Thank you.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• vSphere 4.1 and Win2008R2

  Hello

  I downgraded my v5 to v4.1 license and downloaded the vCenter 4.1 ISO server.

  Then, I downloaded the ISO in the data store and put the vm Win2008R2 CDs to the

  ISO.   I ran Setup and clicked on "VMWare vCenter Server.  It load

  but pops up an error stating:

  "This product cannot be installed on the operation of 64 bits

  systems:

  Windows XP SP2 or higher

  Windows Server 2003

  Windows Server 2008"

  This means Windows 2008R2 is out of the question?

  Thank you

  Edmund

  Yes!

  Installation of vCenter Server 4.1 on a domain controller is not supported.

  Look here

  http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=1029408&sliceId=1&docTypeID=DT_KB_1_1&dialogID=224174180&StateID=0 0 224172553

• VMware Server Proliant 385 + Win2008R2?

  Then, they gave me a depreciated DL385 (2 x Opteron 275, 13 GB of RAM)

  I'm running Ubuntu 10.04.1 LTS 64 bits.

  I installed vmware-server - 2.0.2 - 203138 - update.patch

  VMware-server - 2.0.2 - 203138.x86_64.tar.gz

  Then I did p2v of old machines Debian/AMD64, that works perfectly.

  Then, I wanted to try my luck with Win2008R2. I had read that my CPU probably would not support this guest operating system, but I decided to try and they install fine, but they are incredibly unstable and lock up quite often.

  In the paper, I see messages like

  #UD 9a25de9e sz = 1 ct = 96

  02:54:18.042 18 August: vcpu-0 | DecoderIsInvalidInstruction:686 0xfffffa8003552058 #UD 6ae5de9e sz = 1 ct = 97

  02:54:18.042 18 August: vcpu-0 | DecoderIsInvalidInstruction:686 0xfffffa8003552063 #UD c6c546ea sz = 1 ct = 98

  02:54:18.042 18 August: vcpu-0 | DecoderIsInvalidInstruction:686 0xfffffa8003552074 #UD 281ff40e sz = 1 ct = 99

  03:01:35.776 18 August: vmx | scsi0:0: WRITE command (10) took 2,502 seconds (ok)

  How the only way I can cancel the prompt is byt simply kill the process

  03:07:44.009 18 August: vmx | Captured signal 15 - tid 10720 (eip 0x7f885d7adf83)

  I then found a post related to the 275, which recommended

  CPUID.1.EAX = ""--: 0000:0000:0000::: 0101:-""

  I added this, but he has not really changed anything.

  So, the question now is: is my CPU is just not compatible with R2, or have I missed something?

  Of course, I'll do it and I'll take the points with humility...

  AWo

  VCP 3 & 4

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• Win2008r2 x 64 very slow VM running under Windows 7 Ultimate x 64

  I have searched in the nets and have seen similar problems. However, I just wanted to see if anyone has had the time to fix the issues that I am experiencing. Bascially,: the performance is so bad when you perform an initial installation developer that I shudder to think of what it will be like in normal use. You name: copies of the host is slow, running installs it variety takes an eternity, but the classic is when I installed windows 2008R2 x 64 has taken more than 6 hours to format the 80 GB drive, copy files across and complete the installation.

  In any case, I try to configure a 3.51 .NET / MOSS 2007 Developer of windows 2008R2 x 64 installation. I do this on a labtop to 2.2 Ghz AMD Turion X 2 recently acquired running Windows 7 Ultimate.x64. I have 4 GB of RAM and the usual WIFI Attheros. First of all, I chose VMWare Server 2.01 because it supports USB2 and 64-bit, instant clients while Virtual PC 2007 does ' t.

  Win2008R2 comments

  1. Memory of the VM value first 1 GB 2Gbto see if ifit makes much difference

  2. 2 vCPU

  3. CDROM installed

  4. VMWareTools... haven't tried to install it but page left summary seems to indicate I have not, not sure if it would substantially improve performance.

  5. Bridge networ_k_

  Things to try

  Looking at this networking wire Workstation 6.5 on Windows Vista x 64 host - bridged is broken! The performance of the network very slow folder shared! I should conider

  1. Check that in the laptop BIOS VT is enabled by default - I assumed it was.

  2. Reduction in the number of vCPUs to 1

  3. Drop the CDROM

  4. Ensure that VMWare Tools is fully installed

  5. Deactivation of windows 7 next host card connection network Local - & gt; Configure - & gt; Properties - & gt; Advanced: Large Send Offload v2 (IPv4) and Large Send Offload v2 (IPv6). Remember I'm toward the life of a wifi connection, so this may or may not have any effect

  6. Anything else anyone can think please...?

  I guess I just need some advice to help solve this painful problem, as it is to distract me from what I should do on the guest o/s...

  If you have done nothing yet, try first assign to VM 1 GB and 1 vCPU. Do never set more than 50% of memory available VM vive.

  About RDP: it connects OK? Check the system logs and firewall.

  StarWind Software R & D

  http://www.starwindsoftware.com

• Hyper-V 3.0 and PE2950II

  Hello

  I have a PE 2950II and I want to upgrade Windows 2008 R2 to Windows 2012 with the active Hyper-V role. The EP 2950II is compatible with Hyper-V 3.0?

  DELL PowerEdge 2950 II:
  -Bios: 2.7
  -CPU: 1 x L5420
  http://Ark.Intel.com/products/33929/Intel-Xeon-processor-L5420-12m-cache-2_50-GHz-1333-MHz-FSB

  Do you know if I can start on a 'Hyper-V Server 2012' livecd to test the goal?

  Thank you.

  It brings together all the technical features for Hyper-V, so there should be no reason it wouldn't work.  Server 2012 is not officially supported by Dell, but there are reports (including clean Tech Center from Dell guys) it works great (although not specifically Hyper-V).  In fact, it works still fine on an old 2850 (under Hyper-V, like the 2850 does not support VT).

  There is no 'live cd' available for Windows (server or standalone).  Hyper-V would be very difficult to 'test' in a 'live' in environment.

• PV-132 t w / question/error LTO3-FC

  Message edited by MrNagger on 30/05/2008 23:53
  
  

• Migration win2003 win2008R2 impact on ACS?

  We use AD to windows 2003 functional level and going to AD to the functional level of windows 2008R2
  I would like to know if this has no effect on the installer or the functioning of the 4.2 ACS and ACS 5.5
  can someone tell me if this has no effect on the installer or the functioning of the 4.2 ACS and ACS 5.5?
  We have two versions running, since we are in the process of migrating to the latest version.

  Thanks in advance,

  Ralph Willemsen

  Arnhem, Netherlands

  Hey Ralph,.

  4.2 of the ACS is touched by it.

  It does not support 2008 R2.

  ACS 5.5 is not affected by this upgrade.

  Rate if useful :)

  Knowledge sharing makes you immortal.

  Kind regards

  Ed

• Oracle 11.2.0.4 on Win2008R2

  Hello

  I'm working on updates of databases Oracle on Win 2008R2.

  To reduce downtime and get fast relief application provider suggested to install a second database and simply use datapump.

  11.2.0.1.0 to 11.2.0.4.6 migration went well.

  But the second is really nasty.

  Unfortunately, a 32-bit database has been installed on W2008R2. Yes, I don't know - no comment on this one here.

  Therefore, the task is 11.2.0.4.0 32-bit to 11.2.0.4.6 64-bit

  I installed the 64-bit database and it works well.

  However, I am running in the infamous error ORA-12518.

  If the 32-bit Oracle home is in place, 32-bit DB connection is good, but 64-bit DB fails.

  If the 64-bit Oracle home is in place, 64-bit DB connection is good, but 32-bit DB fails.

  It's the listener.ora

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (SID_NAME = CLRExtProc)

  (ORACLE_HOME = D:\app\oracle\product\11.2.0.4_64bit\DB02)

  (= Extproc PROGRAM)

  (ENVS = "EXTPROC_DLLS=ONLY:D:\app\oracle\product\11.2.0.4_64bit\DB02\bin\oraclr11.dll")

  )

  (SID_DESC =

  (GLOBAL_DBNAME = DB64bit)

  (ORACLE_HOME = D:\app\oracle\product\11.2.0.4_64bit\DB02)

  (SID_NAME = DB64bit)

  )

  (SID_DESC =

  (GLOBAL_DBNAME = DB32bit)

  (ORACLE_HOME = D:\app\oracle\product\11.2.0.4_32bit\DB01)

  (SID_NAME = DB32bit)

  )

  )

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = ORACLE)(PORT = 1521))

  )

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))

  )

  )

  ADR_BASE_LISTENER = D:\app\oracle

  And here's the tnsnames file.

  B32BIT =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = ORACLE)(PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = DB32bit)

  )

  )

  ORACLR_CONNECTION_DATA =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))

  )

  (CONNECT_DATA =

  (SID = CLRExtProc)

  (PRESENTATION = RO)

  )

  )

  DB64BIT =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = ORACLE)(PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = DB64bit)

  )

  )

  Any ideas?

  THX

  sqlplus system/xxxxx@DB32bit-online ORA-12518

  sqlplus system/xxxxx@DB32bit-online OK

  sqlplus system/xxxxx@DB64bit-online ORA-12518

  You should not use them at all.

  Instead:

  > set ORACLE_HOME =

  > set ORACLE_SID =

  > sqlplus system /.

  This should work for you for each database.

• vSphere 4, win2008r2 and alignment sql2008r2

  Hello group,

  I wanted to check what I read.

  We create a new virtual machine to host a sql server server and I wanted to make sure that I understand what I read.  Is it true that I don't have to do anything about alignment?  The use of vsphere when the vmfs LUNs is created with the VI client will automatically align the FS?

  In addition, new MS Windows 2008R2 operating systems automatically align the guest OS?

  I'm looking to make sure that I have to make the right choices here before you start.

  For the bottom, we have a farmer 3 Server with Dell R710 servers and a Dell MD3000i SAN with 15 SAS 15 K 600gig readers.  The san is divided into 2 groups-8 raid in raid 10 disks and 6 drives in raid 10.  The remaining drive is spare.

  Thanks for your ideas.  Also, if anyone can instruct me on how to confirm the alignment is set correctly it would be appreciated.

  You are right, there is nothing to do about the alignment of drive with Windows 2008 (R2). However, for SQL Server, Microsoft recommends to format the NTFS partition with a unit size 64 k. see http://technet.microsoft.com/en-us/library/dd758814 (SQL.100) .aspx

  André

• Types of discs DC Win2008R2 best practices...

  Hello

  I am trying to upgrade my AD environmental to 2008R2 victory, and I ask for feedback on best practices for the selection of the disk type and the parameters of the virtual machine.  I intend to install new scratch and transfer AD ads and much more thereafter.

  I intend to create a volume of 50Gb for the OS itself and a 200 GB volume for departure records and other data to the user.

  In a virtual environment, it is adviceable to locate the sysvol and AD database in a separate location other than the default system drive?

  For my 50 GB disk OS (domain controller), is this normal / good practice to store it with its virtual machine?

  My drive 200 GB of user data should ideally be able to reassign to another VM intact to keep the data in case of failure.

  Which drive 'provisioning' would be normal to use with these types of discs?

  What disc 'mode' (independent / persistent) it would be normal to specify in this scenario?

  When such a virtual disk is created, is it possible to increase / decrease its size?

  Thank you very much for the comments on these issues.

  Best regards

  Tor

  Hello.

  In a virtual environment, it is adviceable to locate the sysvol and AD database in a separate location other than the default system drive?

  Yes, follow the same best practices as you would in the physical environment here.

  For my 50 GB disk OS (domain controller), is this normal / good practice to store it with its virtual machine?

  Probably yes.  Why would you consider storing elsewhere?  You do something with SAN replication or y at - there a reason?

  Which drive 'provisioning' would be normal to use with these types of discs?

  I tend to use thin for the volumes to the OS.  For the absolute best performance, you can go with thick-eager discs set to zero.  If you're talking about data sharing standard file for users, then all disc types would probably be fine.  Check it out "[study of the performance of VMware vStorage Thin Provisioning | ]. "[http://www.VMware.com/PDF/vsp_4_thinprov_perf.pdf]" for more information.

  What disc 'mode' (independent / persistent) it would be normal to specify in this scenario?

  This can depend on how you back up the server, but I guess you wouldn't use not independent.  If you do, make sure you use persistent, you do not want to lose user data.

  When such a virtual disk is created, is it possible to increase / decrease its size?

  The increase is very easy with vSphere and 2008.  Very easy, and it can be done without interruption.  Shrinkage is a more convoluted process and will most likely require a manual intervention and downtime on your part.

  Good luck!

• Connection failures "wmiprvse.exe" on Win2008R2

  Hello
  We have the RAC HOST1 production database (sid: PROD1 VIP:10.10.10.1) and HOST2 (sid: PROD2 VIP:10.10.10.2) on Windows 2008R2. Version of database is 10.2.0.5 64-bit and the Infrastructure of the network is 11.2.0.3.
  Early on, there is problem, some process is obviously trying to connect to the database with the windows SYSTEM account, because oracle account SYSTEM crashes after an hour.
  After searching for newspapers, we found that all the exactly 8 minutes he tries to connect:
  
  1 listener.log entered - the port number is not fixed
  + March 27, 2012 12:12:34 * (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = servicename.domain.si) (INSTANCE_NAME = prod1) (CID = (PROGRAM = C:\Windows\system32\wbem\wmiprvse.exe)(HOST=HOST1)(USER=SYSTEM))) * (ADDRESS = (PROTOCOL = tcp (PORT = 65362))(HOST=10.10.10.1)) * establish * elesprod.eles.si * 0 +)))
  
  2. after one minute (60 seconds Timeout) we also obtain registration in alert_prod1.log
  Kills Mar 27 12:13:35 hour Central Europe 2012
  WARNING: inbound connections has expired (ORA-3136)
  
  3 and sqlnet.log
  Fatal OR connect error 12170.
  VERSION INFORMATION:
  TNS for 64-bit Windows: Version 10.2.0.5.0 - Production
  Oracle leaves NT Protocol adapter for 64-bit Windows: Version 10.2.0.5.0 - Production
  Adapter protocol NT Windows NT TCP/IP for Windows 64-bit: 10.2.0.5.0 - Production Version
  Time: March 27, 2012 12:13:35
  Tracing not lit.
  AMT error struct:
  NS main err in code: 12535
  TNS-12535: TNS:operation expired
  NS secondary err code: 12606
  NT main err in code: 0
  NT secondary err code: 0
  NT OS err code: 0
  Customer's address: (ADDRESS = (PROTOCOL = tcp (PORT = 65362))(HOST=10.10.10.1))
  
  The funny thing is that this connection attempts are only on node 1 (HOST1) and none on node 2 (HOST2).
  No idea what's going on?
  
  p.s.: we create "nolock" profile just for the user of the system, locking if this account is not a problem, but I want to understand, why/who/what is the pain in my a *.

  Hello

  the password for the system account has been recently changed on this computer?
  If so, then the error appears, because the WinPrvSE.exe program uses the wrong account password (and locks the account so).

  To change the password for WinPrvSE.exe program:

  ?:\> %ORACLE_HOME%\bin\operfcfg.exe
  Enter user-name: system
  Enter password: password
  Enter tns-alias: orcl
  operfcfg: New registry values have been successfully set.
  

  or you can change via. assistant administration for windows "Oracle of the counters for the snap-snap-in Windows performance monitor.

  Concerning
  Sebastian

• Software DB can not find the installation 11r2 on Win2008r2 grid

  Hello
  
  
  I try to install RAC DB on a single node on:
  Win2008 R2
  Ora11g R2
  
  After successful grid install (as admin) I run the installation of the DB software and it says: INS-35354.
  OracleASMService + ASM, OracleOHService, OracleOraCrs11g_home2TNSListener services: are started!
  The path of the cmd is set: PATH=c:\app\administrator\product\11.2.0\grid\bin
  
  but he says - it can not find the grid software!
  
  I tried to restart the machine with nothing doesn't. I uninstalled it and installed again in 2nd directory different but still useless.
  
  What is special measures should be taken to prepare the system? (however successfully passes test grid installation phase).
  I use http://download.oracle.com/docs/cd/E11882_01/install.112/e18069/toc.htm
  
  Published by: g777 on 2011-01-11 11:22

  Salvation;

  "" I belive you can get a faster response on Forum home ' Grid Computing ' RAC, ASM & Clusterware Installation part forum

  Respect of
  HELIOS