Only use as a wifi device
I have a Droid 4 that will not let me restart it without a neat sim. I want to only use it as a wifi device, especially when I'm banging long emails etc. How to past the screen that says "do not use this device without a sim card?
If you are to the language screen then tells me that the phone has not been activated because it was reset last. The phone must be activated in order to go beyond the implementation of screens. Once enabled, then you can remove the SIM card and use the phone as a single wireless device. I hope this helps.
Tags: Motorola Phones
Similar Questions
-
Can I install Acrobat Pro DC on two computers with one subscription? I have my mac for the trip, but a PC for my office. I only use one device at a time - don't want to buy two subscriptions. Thank you
Yes, your license allows this.
-
My iPhone freeze with grey screen, then restart only. Subsequently the Wifi is not available, I have to finish manually restart to be able to use the Wifi. I have restart my internet and network settings, but the problem is still there.
Hi there Turco911,
Looks like your screen goes gray and then shuts down its own, and you must manually restart to get the wifi to work again. I save your device in iTunes, then restore it like new and verify that it works.
How to clear your iOS device and then set up as a new device or restore from backupsIf this is the case, restore your backup either check it still works and just reinstalled software or circumvent the problem in the backup file itself.
If when restored like new the problem persists, I would ask for your phone service:
Repair - iPhone Apple Support
Thank you for using communities of Apple Support, all the best!
-
I hope that someone has had a similar problem and a solution! I tried resetting the phone (5s, latest ios etc...) to factor settings, setting back via iCloud backup, reset connections network again, you name it! Basically, I play all my music (which was more often downloaded from my PC at home using iTunes game, as I already had a vast collection of CDs before buying my first phone) via a wifi connection and have had zero problems (using various home wifi connections) and besides... until a week ago. Today, only some beaches (and incredibly, they can vary from day to day...) on some albums (in general, not an entire album, either...) won't play - he simply "jump through" them. However, I can upload them on my phone (on the same wifi connection, you mind) and they will play very well! Obviously, however, I don't want to (can't - much too) to download all my songs to play! Any suggestions would be most appreciated!
Make sure that your device is updated... Sometimes new songs are not compatible with the old software.
-
13 VAIO duo wifi device disappears
I have the duo 13 red vaio edition and in addition to the very poor wifi performance, my SDIO card disappears from the Device Manager on once a week. I need to reinstall the driver to help my computer "find".
Is the wifi device: Broadcom 802.11abgn Wireless SDIO Adapter
Driver date: 17/06/13
Driver version: 5.93.98.4
When he disappears, I can't see all wifi networks. The device is MISSING from Device Manager and the only way to see this is to enable the devices hidden in the view menu.
Any suggestions on how to remedy without a reinstall every time would be very useful. Thank you!
(Patches to the strength of the wifi would be useful as well, but there is another thread, I have taken on this topic.)
Hi, the driver you have is the last version of accredited driver Sony. I just want to know a bit more about what is happening on the part of driver wifi. We received many comments on the wifi feature (which can be caused by the driver being "hidden" in the Device Manager) lost until you restart. It is an accident in Win8 across all series Vaio models. When the device becomes hidden in Device Manager and when the computer is unable to see wifi networks, it also loses the switch "wireless" in the settings of Windows 8 PC? If this isn't there, say, just plane, Bluetooth, NFC are the only switches, you just need to restart the computer. Reinstall the driver causes the computer must be restarted. If restarting the computer, the problem is mitigated until its next occurrence. This question is quite different from the wifi signal that is covered in a different thread.
If this post answers your question, click on "accept as a Solution.
-
I have a MacBook Pro and update to the latest iOS and iTunes. I can't scroll in my podcasts to choose which episodes to synchronize. I can only use the arrow keys to navigate, but then while he list of podcasts on the left, it moves also down from the bar on the list of episodes, so by the time I spend the first 7 or 8 I can't see the episodes more to choose which to add/remove.
Same here, very frustrating.
I found if you go in your library > Podcast, then control click on the podcast, you can select Add to the device, which works, but is in no way acceptable.
-
Why can't connect using Apple Airport WIFI of my remote security cameras but can connect using the Xfinity WIFI Modem/Router open?
Two possibilities:
(1) your airport WiFi might have a network name that is not in line with best practices, wireless
A good wireless network name is...
... In short no more than 20 characters
Simple... no special characters like an apostrophe, dollar sign, asterisk, etc.
Compact, without spaces in the name
For example, a wireless network network name as... red .dfedoryk Apple wireless network... .is not what you want. Something like... .dfedorykwireless. .. masse are much more likely to connect to non-Apple devices.
Same guidelines your password
(2) Apple gives the same name to network 2.4 GHz and 5 GHz network that produces double router band. Some non-Apple devices are confused by the present, you may need to use the option to assign a different name for the network of 5 GHz on the router from Apple. Then, 'point' your device to the network name specific to which you want to connect.
-
I am running XP and I can't use my keyboard and Device Manager is empty.
I am running XP and I can't use my keyboard and Device Manager is empty. I also have problems with my other computer also running XP and it will only start in safe mode. I tried to restore, and when it restarts it still will not start normally. Help, please
Hi margaretbrown,
· What is the number and the model of the computer?
· Also provide the model number brand of na on the keyboard?
· What is the service pack installed?
· Do you remember all the recent changes on the computer before the show?
Try the steps listed in the link below: No. options appear in the Device Manager list when you open it: http://support.microsoft.com/kb/311504
And the computer on which you are unable to start up normally, try the steps listed in the link below: how to fix a computer that does not start: http://www.microsoft.com/windowsxp/using/setup/support/nostart.mspx#2
With regard to:
Samhrutha G S - Microsoft technical support.
-
Using a Repeater wifi with the WRT54G2-cannot get internet access
With a WRT54G2 wireless router I added a WIFI Repeater. A range extender WIFI Netgear wn2000RPT is used as a Repeater. I installed the range extender and I get a good connection with the rehearsal and I can connect from my PC to this relay, but when I do I can't get internet connection. I see this result with my XP system and a Windows 7 system.
For the new connection on the network repeated, I entered the newly created security key.
Configurations of Repeater of most of the brands includes patented technologies that makes it incompatible with other brands. You can only use Linksys routers with repeaters or Linksys wireless access points.
-
Can I use my modem wifi re-large up my internet 64-bit of Windows Vista
##wifi
My laptop has a wireless modem, my access to the internet through the LAN. can I use my modem wifi re-large up my internet, so my other computers can us the internet. I guess what im saying is my card wifi as a hub. im sorry new to this.
I use win vista 64-bitThank youHey, I can't install Win7 64 bit...
Let's get back to a productive tone. You can use the Wi - Fi card on your laptop to create a wireless network for other computers. It is to create an 'ad hoc' network. While going through the installation wizard you can choose to make the ad hoc network, permanent or not.
Note: You can always remove/delete a permanent ad hoc network at a later date. The permanent setting will allow the ad hoc network to stay open even if no other computers/devices are connected on it.
To set up the ad hoc network, please follow the steps 1 to 3 as described here:
Set up a computer-to-computer (ad hoc) networkOnce created the ad hoc network, you need to enable Internet connection sharing for the network. To enable Internet connection sharing, please read carefully the information / the steps here:
Using ICS (Internet Connection Sharing)Note: In the long term, you will experience better performance/stability using a device dedicated to broadcast your network without wire (such as a wireless router). For any future reference the link below will allow you to check to see what hardware is compatible with Windows Vista, so that you can be sure that it will work properly with your computer:
Windows Vista - wireless routers Compatibility CenterHope that helps.
-
I can't share my Wifi using Intel my WiFi utility
I use ACER 4830TG more than a year & I am pretty satisfied. My problem is that I have a Nexus 7 (WiFi) & I used generally to share my wifi PC internet using my WiFi utility intel. But for a few weeks, I am unable to share my Wifi using Intel my WiFi utility. It shows always connect & disconnect info with in a few seconds. But if I share my Internet then it connect with my Nexus 7 & of course, I'm not able to use internet then. Need urgent help please. BTW, earlier, I tried intels new dashboard 15.1, but it does not support my WiFi adapter. So, I rolled back & connect with a common, but now I can't!My WiFi profile current settings:Security: WPA2-PSKType of encryption: TKIPFilter network traffic: disabledDHCP and DNS server: enabledDefault channel: 3No device is blocked!BTW, I used to connect to the same profile settings, but now it is connect any more.Need urgent help pleaseHi Ryan,
Thanks for posting in the Microsoft Community Forums.
I understand from the description of the issue, that you have problems with wifi on the Windows 7 computer connection sharing. I will certainly help you in this regard.
I appreciate if you could help me with more information.
-Don't you make changes on the computer before this problem?
Method 1:
Firstly I suggest to enable network discovery and check if this helps you solve the problem. To do this, please follow the steps below:(a) Open advanced sharing settings by clicking the Start button, then Control Panel. In the search box, type network, click network and sharing Center, and then in the navigation pane, click change advanced sharing settings.
(b) to increase the profile of the current network.
(c) click turn on network discovery, and then click Save changes. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
To learn more about this feature, please visit the below mentioned link:
http://Windows.Microsoft.com/en-us/Windows7/what-is-network-discoveryIt is also possible that the Windows Firewall and the antivirus on the computer may be blocking the printers print.
Method 2:
I wish that you disable the Windows Firewall as well the antivirus temporarily.
View items-
Enable or disable Windows Firewall
http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
Disable the anti-virus software
http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
Note: make sure that you re - activate the antivirus and Windows Firewall because the computer may be at risk of infection by the virus.
Method 3:
Also I suggest to run a network diagnostic tool and check the hope that will solve your problem.To make this problem troubleshooting, please follow the steps below.
(a), click on Start > Control Panel.
(b) click network and Internet, click network and sharing Center.
(c) under network and sharing Center, click on solve the problem.
For more information about how to resolve common network problems, please see the links below:
http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network
http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
Back to us for any problem related to the Windows operating system. We will be happy to help you. We at Microsoft try to provide our customers the best experience.
-
Use of ISE 3355 device of the two GigE ports
I'll put in place six ISE 3355 3 devices in a data center in another 3. They just installed a new infrastructure of server using 5596 Nexus and Nexus 2248TP farm top of rack switches.
I am looking for documentation on how to make the collection of NETWORK adapters on the way 3355 or some connect Gig0 to FEX101 and Gig1 to FEX102. Or simply set up a channel using LaCP port between the two different groups of FEX?
Sent by Cisco Support technique iPhone App
Hello
This is not supported, you can not team or balance the load or use redundant interfaces on devices of the ISE. You can only use a span port dedicated for ISE deployments, or use the links to crossover to a deployment ipep in HA mode.
Thank you
Tarik Admani
* Please note the useful messages *. -
How to make your laptop a wifi device
Hello
I have inspiron n5010 laptop with card dell wireless 1501. I use a wired broadband for internet.is there anyway I can make my laptop a wifi device so that I can connect my laptop with internet with wifi
Hi aamerpk,
Yes, the 1501 wireless card is capable of generating signals wireless mobile devices; You must install a software that converts the signals into mobile hotspot.
There are free and paid software available online, controls this links:
Note: This is a third party site, the site may have its own terms and conditions and there could be no warranties for the software. However try to install if necessary.
Please answer for additional help.
-
I need Flash CC Pro, but it is the only Flash Professional CS6 Mobile Device packaging
Hi, after installing cloud creative tried to find Flash CC Pro, but it is only Flash Professional CS6 Mobile Device packaging. How can I install Flash CC Pro? Thank you
Please try to install it by using: https://helpx.adobe.com/creative-cloud/help/install-apps.html
-
installation of El Capitan in a mac by usb, but only using windows to create the USB
installation of El Capitan in a mac by usb, but only using windows to create the USB
I'm having a problem to install el capitan on a mac book pro 2009 has changed (dead) to an ssd HARD drive
I can't find that any information how to do this from a windows machine (now only available) of the old system had the lion as I was told and when trying to install lion line or wireless it says it isn't available now so the machine is stuck without an operating system.
If you are anywhere near an Apple Store, I would suggest bringing your MBP to and asking to help. For USB, you need to partition and format to allow to boot on a Mac, what Windows can not do. Then either create a bootable installer or install OS X on USB and then copy the installer it, boot from it and run the installer with the SSD as a target.
Maybe you are looking for
-
Hello I recently reinstalled my OS X due to problems of partitions. After installation, I see in "about this mac" that my graphic is Intel Iris pro 1536 MB and not the AMD Radeon R9 M370X as it was before. In system information, I see I have the AMD
-
Satellite Pro A60: Blue error screen
I got my satellite pro A60 laptop for about 6 months and, recently, a blue screen started flashing up to white writing scrolling down really fast and then the laptop restarts. I don't have the time to read what says the writing of this article. Can s
-
quick way to define the family first name
It is possible to select all the contacts whose first name first and change their surname first? This option is grayed out when I select more than one contact. A kind of macro, maybe? Thankd b
-
When I turn on my computer and the desktop comes up, I get a Runner error - "doesn't have a Runner (updates from HP.exe) file name '-' (the id separator).» If I click OK everything continues normally. What should I do? It is an HP with Windows XP c
-
Battery recharges each time connect to the PC
You just bought the clip over and noticed whenever I connect it via USB to my PC to download files, etc, stack of the clip starts automatically reloaded. The duration of the regular cycles of charging battery will not affect my battery life? I guess