Use of ISE 3355 device of the two GigE ports

Similar Questions

• I can't sync my phone to my computer and get the message that my phone doesn't have the latest version of Itunes. I downloaded the latest version on my mac, but what I do on my phone. I'm used to be able to synchronize the two.

  I am more able to sync my I phone on my Mac and get the message that my phone cannot be used because it requires a newer version of iTunes. He tells me to go to www.itunes.com to download the latest version of iTunes... I downloaded the latest version on my mac, but what I do on my phone? I used to be able to sync the two and now I can't even download the photos from my phone on my mac...

  iOS9 on a mobile device requires iTunes 12.3 or higher, which in turn requires a computer running OSX 10.8.5 or higher.  Update of the system only checks the updates for the current version of the system you run, but that itself can be updated.  It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. If you can not run a newer system, you will not be able to sync this phone to your current computer. If she can run 10.8.5 or higher, you can either buy a download for Apple OSX 10.8 Mountain Lion code online, or you can try to install the free El Capitan OSX 10.11.  El Capitan can run slower on older machines and require the additional purchase of RAM.  Making a big jump in versions of system is also more likely to affect the old software.

  At el capitan Snow Leopard, it will make my macbook is slow?  - https://discussions.apple.com/thread/7412959

  Mountain Lion 10.8 purchase link United States of America - http://www.apple.com/shop/product/D6377Z/A/os-x-mountain-lion

  Mountain Lion 10.8 purchase link U.K. - http://www.apple.com/uk/shop/product/D6377ZM/A/os-x-mountain-lion

  Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/

• text messages sent with an email address from a touch ipod duplicated on a second ipod touch using a different email address, but the two ipods are controlled by a parent with the same apple ID and password.

  Text messages sent with an email address from a touch ipod duplicated on a second ipod touch using a different email address, but the two ipods are controlled by a parent with the same apple ID and password.  This has happened recently.  My two girls have used their respective ipods and texting, without their messages of duplication for each of the other ipods for more than a year.  Somehow recently, both addresses seem to be synced with them or something, so that both see each and other messages.  I've recently updated two ipods, iTunes on my computer--not the cloud and added music for two ipods, but has not changed anything by email email settings or message I know.  Help, please!

  Welcome to the Apple community.

  I can't fully follow how you have everything set up, but a glance at the settings > messages > send & receive

• Pair several devices on the same COM Port that use the stack for windows by toshiba bluetooth?

  I have several instances of the same device...

  I wish that they all use the same COM Port when connecting to my Toughbook.
  The application that will receive data from these devices will only monitor a single COM Port assigned to.

  I have only one active connection both for couples... That's why Ifeel, this should be possible.

  Any help would be greatly appreciated

  Thank you

  Hello

  Please contact the Microsoft Community Forums. I understand you want to pair multiple devices on the same COM Port using Bluetooth.

  Unfortunately, it is impossible to pair multiple devices on the same COM Port using Bluetooth as it is by design.

  With the help of Windows-related issues feel free to post on the Forums of community of Microsoft, we will be happy to help you.

  Thank you.

• How to add a trusted device to the two-step verification

  I have setup two-step verification on my Apple ID and there two numbers in place for audits.

  I recently added an iPad to our devices and also restored two iPhones.

  During the installation process, I was able to add these devices secure, so they now get verification numbers sent outside the SMS system.

  Is there a way to add my MacBook Pro as a trusted device too? Currently, I can't get checks him via transfer of text from my iPhone if I send the check to one of the original phone numbers.

  Do the Web to manage Apple ID site:

  https://appleid.Apple.com/account/manage

  Operating instructions here:

  http://www.idownloadblog.com/2015/10/23/Add-remove-trusted-devices-Apple-ID-two-Facteur of authentication.

  Frequently asked questions about the audit in two steps for Apple ID - Apple Support

• Using Gre Tunnel between devices on the same LAN

  Hello world

  When we need to use the Gre Tunnel on same side means on 2 devices to each other on the LAN?

  Whats is advantage of using GRe Tunnel on LAN?

  Thank you

  MAhesh

  In general, GRE tunnel is not on the same side/network.

  It serves to connect 2 networks and to get through the traffic.

  GRE advantage is that it can participate in routing protocols, then it becomes a little jump through the tunnel instead of several jumps across different devices. As a result, the GRE is also used for tunnel traffic that is not natively supported by these devices where the type not supported traffic cannot pass through.

• vCenter DB and DB Manager Update on SQL - use a user account to access the two DB or separate user accounts?

  Hi people,

  I built a laboratory to test ESX and I always wondered what the best practice when you want to access the SQL2005 DB vcenter and updating manage DB.  In the past, I always created separate user accounts to access their database.

  Any problems if I were to use one account for both of the DB.

  Looking for ideas on this.

  Kind regards

  Rick

  Hello

  Role separation is advisable for many reasons. In this case, you can create a more flexible and more secure configuration using two accounts. Functionally, it work whatever it is, but if you need to separate the instances in the future you might some unwanted configuration dependencies.

  Kind regards

  Mike

  http://blog.laspina.ca/

• In a wreath of two screens Thunderbolt, I could replace the first display with a (for example) 2012 iMac and use target Display Mode to power the two?

  My Thunderbolt screens have the possibility to be connected in Garland and get their signal on a single cable Thunderbolt, an iMac in target Display Mode should not also have this capability? Is an iMac in target Display Mode capable of simulating a Thunderbolt Display not only to get a video for himself but also for a Thunderbolt Display is connected?

  I've heard tell that some people used their iMac screen target with the target Display Mode while the iMac has been connected to another monitor (not a Thunderbolt Display).

  The result was that internal display of the iMac switched on the target Display Mode, but doesn't have the monitor connected.

  I haven't found someone who has tried this and published his experience with a Thunderbolt Display connected to the iMac.

  Unfortunately, a little more research would have responded and answered my question.

  Yes, I can replace one of the Thunderbolt screens in the chain with an iMac. Replaced screen should be one that is not directly connected to the mac of the source.

• How to get the video conference on the two HDMI ports simultaneously in the telepresence codec sx20 o/p?

  I tried to get video output in both output HDMI port SX20 codec, but when I'm on one device to the other display is turned off, so my question is, I can't exit on both screens at the same time? If so, how?

  Hello

  First of all what you should check that the "videos > monitors: role" is set to Dual and you can then configure the output HDMI mode primary, secondary or presentation only.

  This can be done through the WEB user interface or via the CLI over SSH

  http://www.Cisco.com/c/dam/en/us/TD/docs/Telepresence/endpoint/quick-set...

  If your search "Video monitors" in this document, you will see the orders if necessary.

• can you use FaceTime with three devices at the same time.

  I need to be able to have a video conference with three people. A person will demonstrate a product whose other two will check to see that it is OK. Each person is in a different location. I can't find anywhere how to do this. Since it is an event of the time, I won't buy any conference high-end software. We will have a combination of iPhones and iPads.

  N ° but Skype should work.

• M40X-129: the two usb ports on the right does not work

  Hello people.

  Two days ago, I bought a satellite m40x-129. I wanted to use a usb mouse and a drive hard usb so I had to plug the device into a a usbport on the right side of the laptop, but is does not work.
  even after reinstalling with windows xp pro (I need to connect to a primary domain controller) has not changed. I installed all the drivers of the tool-cd burned by a toshiba tool in the original installation.
  Maybe it's a hardware fault. someone else has the same problem?

  Thanks, jens

  today I updated my drivers for the new 7 series chipset from intel, but the usb ports on the right still have no power and do not recognize any device.
  I'll ge see my local dealer Monday ;)

• WebLogic 8.1-> access enviornment by one of the two http ports

  We head to a request for access code unique for our enviironment 8.44 Peopletools. Currently, the environment is accessible via port 80. I'm looking to maintain port 80 in place but add port 8081 to be used by the application of single signon to the same environment.
  
  Is this possible, and what I need to create another Weblogic PIA service or add a new domain?
  
  Enjoy a preview

  Is it still a multi-server PIA or UNEEFVP Server Sinlge? Have you checked "Anonymous Admin Lookup Enabled" in the weblogic console?
  If there is a PIA MultiServer, you must copy the config.xml file located under \webserv\ MSI - config.xml and bounce the server after

  It is a "bug" documented on the Support of Oracle
  E - WS: cannot connect to PIA after WebLogic 8.1 SP5 or SP6 Upgrade, ERROR: session cookie name (null) is empty, or using a first digital character > [647113.1 ID]

• How can I use the USRP to record a signal using its two RX ports simultaneously?

  Hello.

  I am trying to record a signal using two antenna cone. The reason that I need two antenna to cover the bandwidth (DC - 6 GHz). a single antenna covers DC - 300 MHz and the other covers 300 MHz to 6 GHz. so I need to use two RX port of USRP at the same time to record the signal. I have two questions:

  1. is this all USRP market capable of covering this frequency range?

  2. is it possible to use the two RX port at the same time to the signals of the records I described? If this is not the case, how can do?

  P.S. I have two NI2920 USRPs and two USRPs N210 in my lab.

  Thanks in advance for your time.

  Sam.

  Hi Sam,

  To answer your first question, the USRPs you can reach the bandwidth you want. There is not a USRP, to my knowledge, that can reach this range in a single device.

  Also note that you can only use RX convened for two different ports at the same time using LabVIEW and the pilot of the USRP. If you want to use the two lines of RX, you will need to run a session with a single line, close the session and then start a different session for your second RX line.

• CD/DVD drives not working only not on the two PC running Vista, heeeeeelp!

  Hi guys, two PCs, which is new, both running Vista decided that the installed CD/DVD readers shouldn't work!

  The new PC reads a CD/DVD when inserted (lamps flash to recognize this is something), then nothing (Autoplay is configured to use iTunes ) so I'm going to, click on 'Computer' on the disc, and he says "insert a disc into the DVD drive (f) "

  So, I installed the MS auto fix jobbie and it says ' insert readable media...» "I've had (several store bought CD and DVD all failed to save) then I tried to search the upper and lower filter using regedit, but there is no file with this name in the folder on the drive.

  Device Manager indicates that drivers are up to date, and the device does not work, even though I have many distinguishing!

  Apparently, it is specific to Vista, but suggested courses of action left me with an even worse urge to kick the bloody things around the House that I had when I tried to play the CD in the first place, any help from you lovely people would be most appreciated. Thank you, James :)

  Hello

  If you have too many programs loading CD/DVD they can collide with each other as they
  competition for resources. These will be workload often pieces of themselves in memory at startup
  so it will have an effect, even if not to use. If you have installed some of these
  lately trying to uninstall it to see if it has an impact.

  --------------------------------------------------------------------------------------------------------

  This troubleshooting help:

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.

• HP Pavilion 15-n259TX (two Usb ports on the left does not work)

  I recently lowered the windows note 8 for windows 7 and found that the two usb ports on the left side of my laptop no longer works, that is, they do not detect anything, be pendrives or external hard drive. Can you help me fixed the problem?
  My laptop is HP Pavilion n259TX 15.

  Hello

  Install the driver usb 3.0 on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp64501-65000/sp64965.exe

  Kind regards

  DP - K