onPeekStarted and onPeekEnded signals not firing

Similar Questions

• MessageService messagesAdded signal not firing

  I am trying to connect the signal of messagesAdded but he isn't shooting QList message.

  When I have several messages in my Inbox on the server, then I goto the hub and do a refresh of the hub downloads the messages but not pull the app message signal.

  If there is only one message, then the signal is triggered to as the signal but not this signal.

  In the sample application by BlackBerry messages they have that.

  in the .h file
  
  private Q_SLOTS:    // Filters the messages in the model according to the filter property    void filterMessages();
  
  in the C++ file
  
  connect(m_messageService, SIGNAL(messagesAdded(bb::pim::account::AccountKey,    QList, QList)), SLOT(filterMessages()));
  
  void Messages::filterMessages(){}
  

  I had problems to connect the signal "messagesAdded" too. I came to identify when the signal is launched, but when that happens, that he was throwing the following error message:

  QObject::connect: Cannot queue arguments of type 'QList'
  (Make sure 'QList' is registered using qRegisterMetaType().)
  

  This thread has helped me solve it: http://qt-project.org/forums/viewthread/2884

  Adding the following lines I could connect and manage the signal:

  In .hpp file:
  
  Q_DECLARE_METATYPE(QList)
  

  in .cpp file:
  
  qRegisterMetaType >("QList");
  qRegisterMetaType >("QList");
  
  ...
  
  connect(_messageService, SIGNAL(messagesAdded(bb::pim::account::AccountKey,QList,QList)),
  SLOT(onNewMessages(bb::pim::account::AccountKey, QList,QList)),
                    Qt::QueuedConnection);
  

  The signal is sent when a new email account is added (an e-mail account, for example) or when several messages come from the server at the same time. To test the program is more convenient to try the first case because we don't have a lot of control to force the other.

  Hope this will help.

• GPS latitude and longitude are not when no signal

  Hello

  I am buliding a BB 9700 GPS application. I am able to get the latitude and longitude through cellTower (using the Service Provider signal), but I am unable to get the latitude and longitude when there is no signal. I tried the criteria to false, but the lattude and longitude do not come.

  Please find the code below

  private LocationProvider _provider;
  private Criteria _criteria;
  boolean deviceReciever,cellSignal;
  
  String longitude, latitude,altitude,speed;
  
  private void FixLocation()
  {
        resetProvider();
        /** Initialize Criteria and LocationProvider instances. */
  
        deviceReciever = true;//receiving lattitude and longitude to phone gps reciever
        cellSignal; = false;//Disabling ph signals
  
        setupCriteria();
        createLocationProvider();
  
                 if(_provider!=null){
  
                    try{
                     _location = _provider.getLocation(5);
                   locationUpdated(_provider, _location);
                   }catch(InterruptedException e){
                          //log(e.getMessage());
                          System.out.println("Exception called --->"+e);
                     }catch(LocationException e)
                     {
                             //log(e.getMessage());
                             System.out.println("Exception called --->"+e);
                     }
                     /*-->
                     try
                     {
                          System.out.println("babaji");
                          System.out.println("The _interval="+_interval);
                          _interval = -1;
                          _provider.setLocationListener(this, _interval, 10, 20);
                     }
                     catch(Exception e)
                     {
                         System.out.println("Exception called-->"+e);
                     }
                     */
                 }
  
         }
  
      private void resetProvider()
      {
          if (_provider != null)
         {
            _provider.setLocationListener(null, 0, 0, 0);
            _provider.reset();
            _provider = null;
          }
       }
  
        private void setupCriteria()
        {
              _criteria = new Criteria();
              if( deviceReciever == true )
              {
                  _criteria.setCostAllowed(false);
  
              }
             else if( cellSignal == true )
              {
  
                  _criteria.setHorizontalAccuracy(Criteria.NO_REQUIREMENT);
                  _criteria.setVerticalAccuracy(Criteria.NO_REQUIREMENT);
                  _criteria.setCostAllowed(true);
                  _criteria.setPreferredPowerConsumption(Criteria.POWER_USAGE_LOW);
              }
         }
  
      private void createLocationProvider()
     {
                  /**
               * Initialize _provider using _criteria.
                  */
              try
              {
                   _provider = LocationProvider.getInstance(_criteria);
              }
              catch (LocationException e)
              {
  
             }
        }
  
       public void locationUpdated(LocationProvider provider, Location location)
      {
               if (location != null && location.isValid())
               {
  
                    QualifiedCoordinates coordinates = location
                                      .getQualifiedCoordinates();
  
                      speed = Float.toString(location.getSpeed());
                      longitude = Double.toString(coordinates.getLongitude());
                      latitude = Double.toString(coordinates.getLatitude());
                      altitude = Float.toString(coordinates.getAltitude());
  
                      System.out.println("Longitude --->"+coordinates.getLongitude());
                      System.out.println("Latitude---->"+coordinates.getLatitude());
                      System.out.println("Altitude->"+coordinates.getAltitude());
                  }
  
       }
  

  The longitude and latitude are coming as null always if we I'm reciving the gps via the mobile gps receiver. If the signal of the mobile service provider then uses the lang and lat come.

  I don't want to use the service provier signal for lattitude and longitude.

  Please suggest me the error I made in the above code and assistance.

  Thanking you

  Standalone GPS works best outdoors, with a clear view of the sky.  At the very least, near a window.

  You can experiment with the timeout.

  (If these answers answer your question, please mark the thread as solved.  (Thank you).

• Leaves open and closing signals do not seem to work

  Of the clues as to what special qml/qt/cascades magical thing you need to do to get the sheet open and closed signals to deliver?

  The Basic code fragment is

  Sheet sheet is iNewSheet-> Construct();.
  bool ok = connect (sheet, SIGNAL (closed ()), this, SLOT (onSheetClosed ()));
  Q_ASSERT (OK);
  OK = Connect (Sheet, signal (Opened ()), this, slot (onSheetOpened ()));
  Q_ASSERT (OK);
  sheet-> open();

  Both links it seem to work - as in there is no assert.

  The sheet is open ok, but no signal is transmitted

  The sheet can be closed ok, but no closed signal is transmitted.

  We also tried the openedChanged() signal, but that doesn't seem to be delivered either

  If any readers

  No idea what we have changed but the

  Plug finished animation + is now open and the

  Care ended animatng + is now completely closed

  signals which do not seem to work previously now work.

  We can only guess its something to do with the parameters of the method 'connect' or maybe the location of the statements of breeders or possibly using "Q_SLOTS" and not statement 'niche roles' or some other thing random Qt that would be taken by either the preprocessor, the compiler C runtime connect() returns value or other tools applied to the CBC to he mangle in Qt code.

  What exactly is the problem with normal standard C++ interface inheritance for most of these?

• the wireless network icon is suddenly changed and I do not now see my signal strength

  the wireless network icon is suddenly changed and I do not now see my signal strength... What do I do to fix this... ?

  Hello

  Have you made changes on the computer before this problem?

  I suggest you try these methods and check the status of the issue.

  Method 1:

  Wi - Fi and in Windows network connection issues.

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  You can also try temporarily disabling computer security software and check.

  Disable the antivirus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

• No noise and cache-battery not charging - Satellite L755 - 1 CD PSK2YE-08T00YFR

  Hello

  I have two problems with my toshiba L755 - 1 CD PSK2YE-08T00YFR

  1: no sound

  When I try to grab the microphone into the mic port, the sound Manager, it freezes and any use of sound programmes it freezes like vlc, I turn off the audio Manager Windows, disconnect me and logging devices device when I clicked in the sound icon troubleshooting the problem and the noise come buck and when I again seized the microphone he not freeze the sound Manager , I disable the audio device in the Windows Device Manager, and I continue to work without sound for 30 min ~ 1 h, I reboot my pc to start windows (windows 7, I don't remember what happens may detect a new device), I click on the sound icon troubleshooting two devices (photos attached) I chose 1 and it doesn't solve the problem but the speakers work not , I'm going to the sound Manager I see a disconnected device (maybe my card sound, pictures attached) and two new devices (attached pictures) and I see some changes in the reliable data connector (attached photos), and in the tab input device, I see a disconnected device (maybe my card sound, pictures attached) and three new device a MIC webcam (photos attached).

  before this problem the webcam and microphone webcam not working do not (I think I have hardware problem - webcam with sound card).

  I restart my pc and I chose "load factory default settings" from the bios when windows start detects a new device (webcam) but the sound does not (webcam and microphone webcam works fine now).
  I have try to disable the webcam and sound card, enable the sound card, reboot, load default... linux live cd... nothing, no noise.

  I try to test the bios beep, it works, I can hear a sound signal.

  I don't know how to solve this problem
  I need noise, I miss her, I can't do anything without the sound, please help me

  Attachment 558 Attachment 559
  
  

  2: battery not charging

  My maybe of battery 30 ~ 40%, when I suspend my pc (for 8 ~ 11: completely discharged battery) I forgot to load it, the morning I plugged it in HQ, 2 hours the led remains red when I turn on my pc and check the battery level, I see only 4% (hip, accused), I remove and buck battery but does not support he notices 4%.
  How can I recharge my battery?

  I need fix the sound problem

• Satellite A100 - signal not supported from PC to TV

  Hello

  I have a Satellite A100-SK8 I used to connect it to my Sony 40v2500 using a cable of AVG. However, recently it will no longer connect and I get the mesaage "signal not supported set the output to your pc" on the TV. I use the same cable to connect my another PC to the same TV and it works correctly.

  Any help is very appreciated!

  Thank you
  Shain_20

  Hi shain_20,

  Can you explain which is an AVG cable? I've never heard of this

  In any case, he s strange that he doesn t work then you change some parameters of display or any other driver/software driver?

  Maybe reinstall the display driver could help...
  Usually, you can switch between monitors using the FN + F5 key combination.

• iPhone and iPad does not connect to internet

  Hello

  Since yesterday, I was unable to connect to internet via wifi on my iPad and iPhone.  They show the power of the full signal and says I'm connected, but won't load Web pages or refresh applications.  When I disable wifi on my phone everything works fine on the LTE, but I don't want to use my data.

  I think it must be something with the update iOS because:

  -J' completely rebooted our router and modem and it worked on my iPad for about 30 seconds (what makes a Web page) before it stopped working again.

  -My boyfriend did not the last update on the iPad or iPhone, and both connect on our wifi at home, while my iPad or iPhone will connect to the internet.

  -My iPhone also does not connect to the wifi in my work, even though I know it works as I am online on my computer work via wifi.

  I noticed something strange on my iPhone and iPad when I went to check the settings wifi yesterday - the VPN configuration is flashing/refreshing without touching me, even if I don't have everything set up VPN connections.  When I actually click on VPN, an error is displayed.  There may be something wrong with the VPN on the new update which blocks the wifi signal?

  
  

  I really appreciate your help!
  

  If you are able to connect your iPad and iPhone to your wireless router agreement but the iPad and iPhone will not connect to internet, it is unlikely to have anything to do with the version of iOS.

  Try this:

  Restart your router (unplug unit, wait ten seconds and then reconnect it).

  Wait for the router shows all lights normal and connected.

  Now, reboot your iPad or iPhone

• Export of signal not cleared after erasing the task.

  Hello

  I'm a newbie DAQmx. Material: LabVIEW 8.6.1 with a USB-6251

  I just put a Signal.vi of export DAQmx in the example of the impulse to dig of Gen.  He rerouted properly to the PFI cntr0 I chose but also left the default connected.

  I removed the Signal vi export and represented the Pulse.vi Gen digging and found that the IFP had routed I always responded.  Can someone tell me what's supposed to happen?

  More KB of aNItaB (which is a great resource whenever you are looking to export signal) note this counter output uses a "lazy uncommit' on the output terminals. Basically once you send a signal somewhere it will be routed to this line until you reuse this PFI line for something else. You can lighten the device reset routing, or just tristating line using the output Terminal.vi Tristate DAQmx.

  See you soon,.

  Andrew S

• Problem solved (rt3290 of abandonment and low signal Ralink) wireless card

  Dear owners of Hp

  I recently bought a new Hp laptop which included the defective Ra link rt3290 wireless adapter, included sypthoms was frequent dropouts and forces signal flucatuating. The card was on a 5.0.45.0 Version, I tried to update via the driver properties in Device Manager but ended without any result.

  There were more messages by many hp owners on face similar problems with this card, I tried all possible solutions, including, by checking the box, other wlan adapters, go back to the previous version of the energy-saving stop disabling driver.

  I think that I ve found a solution via a simple update here

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_149767_1#tab-history

  Download version 5.0.53.0 Rev D and when said when a previous version of the driver were found after installation, click on the replacement of all previous features. The update has now fixed the problem and my wifi signal is strong and did not have a single drop out.

  I hope that I have provided some form of assistance, some feedback would be nice, thanks.

  Hello:

  Happy is he who solves the problem for you.

  There is a newer version if you want to give that a try (5.0.56.0 Rev.D (June 10, 2015)).

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_149767_1

  But as the saying goes... "if it ain't broke, don't fix it."

• I just bought a canon 6 d and I can not get my remote EXILE 430 flash. Anyone know why?

  I just bought a canon 6 d and I can not get my remote EXILE 430 flash. Anyone know why? Apparently my camera 'new' picture does not "see" the flash, must now the transmitter? Is there a Flash that work wirelessly with my canon 6 d?

  All remote flashes need a way to communicate with the camera.  They can be wired or wireless.  The wireless system can be optical or radio.

  The key is that there is nothing built in the 6 d to control a flash... If you need something to do this work.

  The 430EX II can be triggered via optical signal as a remote "slave" flash (430EX II cannot function as a mode of 'master' (aka 'Commander').)

  The method of Cannon to control the 430EX II is to use either:

  (a) a "Speedlite ST - E2 transmitter.

  (b) speedlite another able to work in "master" mode (and there's a long list... the 600EX / 600EX-RT, the 580EX II, and curiously the 90EX is actually able to perform a 'master').

  I recommend either the 600EX-RT (which would be the basis for additional units 600EX-RT in the future that would give you radio trigger) or find a 580EX II.  I probably spend on the 90EX and promote a ST - E2 if desired subject is a way to trigger the remote flash and don't actually want a flash.  The 90EX is not very powerful, so it is not particularly suitable as a stand-alone flash, unless you use it simply as a "fill" flash for close subjects.)

  There are also many 3rd party triggers, but the vast majority of them won't let you not use E - TTL (they would be "manual" only) and the units which support E - TTL will be too expensive to buy just a high flash range running as Commander.

• WRT54G and WRE54G does not...

  Hello

  I try to extend my network v1.02.7 WRT54G with an v3.04.01 WRE54G Expander wireless.

  SSID is disabled

  128-bit WEP encryption

  Channel 6 on both devices

  Router IP 192.168.2.2

  Subnet mask 255.255.255.0 router

  Start DHCP 192.168.2.100 IP (max 50)

  Routing Table entry list:

  WAN gateway 192.168.1.1-> 192.168.1.104-> 192.168.2.2 gateway WAN (LAN & Wireless)

  Repeater IP 192.168.2.100 (also tried 192.168.2.3)

  Repeater 255.255.255.0 subnet mask

  Repeater 192.168.2.2 Gateway

  When I turn on both devices and connect with my laptop for the Repeater everthing seems to work very well at first.

  After a few minutes tho the Repeater of fire seems to be "lost in transaltion ' and the connection

  Gets VERY slow (with I mean nothing happens more). It maintains the connection tho.

  When it is connected to the router or via cable and everything works fine.

  Any suggestions before I got this thing in the store?

  Thank you!

  Eureka! I think I got it...

  I did a few tests more with the distance between the router-> expander-> computer.

  If I was in a room with the router, expader and computer everything worked fine.

  It doesn't matter if I was connected to the router or extender or via cable.

  So I thought that the distance between the router and the expander control is REALLY crucial.

  Too close and you're not developing your network enough... too far and you won't get a connection with the Extender that actually works.

  What I did then put the router in the center of the 1st floor and the Expander in the Center

  from the 2nd floor above the router. And now after a few hours everything still works fine!

  Don't be fooled the indicator of the signal strength in Windows!

  All this did not properly although it said very well all the time...

  thx again!

• Tower PC and monitor does not turn.

  Turn on PC and monitor is not responding. Turn on the monitor and a message on the screen says "No Signal", then turns off. Also 'Num Lock' key will not turn the Verr Num keyboard light.

  Try reinstalling your RAM. Pull your memory sticks out and put them back in firmly. Be sure to touch the chassis of your system before you pull it from your memory, in order to discharge static electricity from your part.

• Alerts and notifications do not open on top

  Alerts and notifications do not open on top and they do not persist. If I do not hear them coming in through the sound alert, I know there has never been an alert.

  At first, I thought it was just a matter of MS Office Outlook 2010, but now I realize that NONE of the notifications in Windows 7 or Office 2010 open on top more.  I can't find the settings under my control I can change to fix the problem.  It is a major problem with Outlook tasks and calendar alerts.   Also, I usually have lots of windows open and not dig through a bunch of windows until I finally get to where the alert is.  It is tedious and very annoying, especially since it's something that not used a problem so obviously Microsoft could fix, but he chooses to not.  I really need alerts to open on top, as they did in previous versions of Windows/Office.

  I am not always at the computer when the pop up notifications, so I can't hear the sound signal.  The problem is compounded by the fact that they also do not persist, so if I don't meet them, they're just far from their own free will.  When I go to the computer, I have absolutely no idea of the alert never popped up.   It is also a problem when downloading, etc from the internet.  I'm sitting here, waiting for the next shoe to fall and we found through the unfortunate experience that if I dig through all the layers on my monitor, I déterminais that finally a dialog box waiting for me to take action.  Because of all the windows, I usually open a full system tray, my notification bar is often at two levels, so I see either the Visual icon of blinkin highlighted yellow.

  Please download Microsoft to resolve this issue in the near future.

  If a program requests your attention, as an alert from Outlook calendar, it should Flash the taskbar to alert you.  The reason it appears not on top is that - if you type when it appeared, your typing would interact with the alert and eventually choose an option, that you do not want (like "Delete email" or "Close alert").  The flashing taskbar button calls your attention without any risk.

• Silverlight has been installed on my dell with media player and after that the tuner has stoped running silverlight would have something to do with it? I get a low rate and no signal tuner.

  Silverlight has been installed on my dell with media player and after that the tuner has stoped running silverlight would have something to do with it? I get a low rate and no signal tuner.

  Hello

  Thanks for the quick response.

  What web browser do you use to access the links in my previous post?

  If you use Internet Explorer, I suggest to optimize Internet Explorer settings and check if it works.

   

   

   

  How to optimize Internet Explorer

  http://support.Microsoft.com/kb/936213/ro

   

  Warning: Please note that the reset Internet Explorer (IE) resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.

   

  If the problem persists, you can reinstall the drivers for the Tuner card and check with the question.

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.