Leaves open and closing signals do not seem to work

Similar Questions

• [Solved] GL: Opening and closing periods does not display the LOV book

  Hello

  I created a new book and associated with the profile option ' GL: Data Access set 'and' GL: name of the book ' at the level of responsibility.

  

  I created a new responsibility to access my book.

  

  When I tried to open a period for the first time since the new responsibility, I'm not able to see all the values in the LOV Leder.

  

  Am I missing any installation?

  Thank you

  Saida

  Hello

  Try running the following question with your access_set_id in parameter:

  SELECT DISTINCT lgr.name, lgr.ledger_id, acc.access_privilege_code, lgr.latest_opened_period_name, lgr.first_ledger_period_name, lgr.short_name, lgr.chart_of_accounts_id

  OF acc, gl_ledgers lgr gl_access_set_ledgers

  WHERE acc.access_set_id =: PARAMETER.access_set_id

  AND lgr.ledger_id = acc.ledger_id

  AND lgr.object_type_code = 'L '.

  ORDER BY lgr.name

  If this script returns no rows check your request competitor status "General Scriptures accounting installation program". It seems that gl_access_set_ledgers materialized view was not refreshed successfully. Submit the program accounting General Ledger Setup again and check that the program has completed successfully.

  Kind regards

  Dmitry

• Pinch zoom opening and closing (mac) does not work in the last beta update

  Anyone know why pinch open close to the pavement of mac suddenly not zoom the last updated beta?

  Preferences that control this action have been reset to empty strings.

  You can use the related browser.gesture preferences to change these values to restore the old behavior:

  • Browser.Gesture.Pinch.in-> cmd_fullZoomReduce
  • Browser.Gesture.Pinch. in.shift-> cmd_fullZoomReset
  • Browser.Gesture.Pinch.out-> cmd_fullZoomEnlarge
  • Browser.Gesture.Pinch. out.shift-> cmd_fullZoomReset
  • Browser.Gesture.Pinch.Latched-> false
  • http://KB.mozillazine.org/about%3Aconfig

• Updated my CPU (Windows 7 64-bit) and DRM rights do not seem to work for Windows Media Center

  After the upgrade, only the specific movie channels in Media center play is more (Record) after approximately 6 seconds.

  (Do not forget that there is a function of pause/forward who s equivalent to check-in for DRM)

  Get a message from copying prohibited.

  Looks like the upgrade of the processor messed up somehow DRM rights for this machine, to the point where no films previously saved are playable AND NO NEW FILMS can be registered and enrolled in some way a Canadian Film Channel. (Bell Expressvu - channels 300 + Movie Network)

  As wired http://www.microsoft.com/windows/windowsmedia/player/webhelp/default.aspx?&id=C00D2798

  Delete the contents of the file DRM (archive first)

  c:/program data/microsoft/windows/drm.

  Restarted...

  Partial contents of the folder have been recreated...

  Problem remains.

  Can Watch all the channels, but those who are 'Movie channels' stop after about 6 to 10 seconds and display a Message of copying prohibited.
  The broadcaster has banned this content to be copied. You can only read this content on the same computer on which it was recorded.
  Note: I don't like on my OLD recorded movies... In fact already deleted... I just want to be able to watch the movie channels and save NEW ones...

  Well after 4 days of effort + a fix was finally discovered...

  (1) exit Windows Media Center is running.

  (2) open a cmd prompt - run as administrator.

  (3) run the following commands one at a time:

  Code:

  net stop ehrecvr CD %programdata%\Microsoft\PlayReady del *.hds rmdir /s Cache CD %programdata%\Microsoft\ehome del *.hds rmdir /s Cache net start ehrecvr

  (4) run Windows Media Center. Update of PlayReady through tasks, settings, TV, TV Signal, PlayReady update.

  It was the only solution to Playready update succeed to in Windows Media Center.
  Playback worked immediately without any loss overall upward or configuration information...

• Preview my slide and roll-overs do not seem to work?

  In "Preview" mode and "Preview in browser" my roll-overs and slideshow do not work. In the mode designers they work, then work when I write my site?

  Hello

  Could you please try checking the preview in different browsers (you can copy the URL to preview and paste it into another browser)?

  If she even in all browsers, it is likely that this will not work when published.

  Kind regards

  Neha

• I use v20.0.2 and restart using the same windows and tabs does NOT work. I deleted the profile and restarted, etc, but nothing seems to work. What now?

  Don't know what else I can give you here. This particular software function doesn't seem to work.

  In case you use "clear history of Firefox closing:

  • do not erase browsing history
  • Tools > Options > privacy > Firefox will be: "Use the custom settings for history": [X] 'Clear history of Firefox closing' > settings
  • https://support.Mozilla.org/KB/clear+recent+history

  Note that compensation "Preferences of Site" clears all exceptions for cookies, images, windows pop up, installation of software and passwords.

  You can check for problems with the sessionstore.js and sessionstore.bak files in the profile folder of Firefox that store session data.

  Delete the sessionstore.js file possible sessionstore-# .js files with a number and sessionstore.bak in the Firefox profile folder.

  • Help > troubleshooting information > profile directory: see file
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  Delete sessionstore.js will cause App Tabs and groups of tabs open and closed tabs (back) to get lost and you will have to re-create them (take note or bookmarks).

  • http://KB.mozillazine.org/Multiple_profile_files_created

  If you use a software like CCleaner cleaning then check the settings in the Firefox application.

• My programs are opening and closing slowly

  Member of the expensive Microsoft Answers Community:

  My programs are opening and closing slowly from last night. Do you know why this could happen and if 'yes', what can I do to solve it?

  Deepa

  Hello

  Troubleshoot using these methods and you can try a system restore which I wouldn't do unless
  nothing else has helped.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ==========================================
  ==========================================

  Only if necessary and then you run back through the above (including the drivers once again) anyway.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Find and replace tags opening and closing

  Is there a way to search and replace the entire tag in dreamweaver?

  I want to take away all of the < span > tags in the document because it is an epub. But some of the <>spans are for the body and some are for another hairstyle, in this case italic. I can go through and just find and replace, but then who would only replace the opening < span > and not closing </span >, leaving a lot of open tags < em > to sift through. There are currently more than 1,500 cases of italic text in the book and I won't have trouble all by hand. What I want to do is to find the particular < span > tag and replace < em > < /em > both the opening and closing.

  Here is an example of what I'm trying to do:

  
  

  To find:

  < span class = "CharOverride-4" > < / span >

  
  

  And replace with:

  < em > < /em >

  
  

  
  

  How do I get there?

  
  

  Thank you
  

  If you use the Search Tag he finds tags opening / closing and replaces them with opening and closing .  Please see my screenshot again.

  Nancy O.

• How to remove the sound notification of opening and closing foxfire

  Whenever I open or closed foxfire 36.0.4 I hear a gong, would like to turn off.

  Thank you all, just fixed it. I have pro with sense of power system mechanic.
  It has a checkbox for the sound notification. Uncheck and bong went
  opening and closing of firefox. Still don't know why he touched just this one
  browser and not others.

• DVD disc drive tray keeps opening and closing constantly

  FOR WINDOWS VISTA HOME PREMIUM EDITION

  DVD CD ROM DRIVE TRAY KEEPS OPENING AND CLOSING CONTINUOUSLY - GET COMPUTER TO READ DISCS AT ALL - OTHER ASPECTS OF THE COMPUTER RUN FINE - DIAGNOSIS SAY THAT HE DIDN'T THERE HAS NO PROBLEM WITH ANYTHING.
  IN DEVICES, I NOTICED THAT DEVICE DRIVER IS FOR ARCSOFT - THIS UNIT HAS BEEN IN FOR REPAIR, AND I ME ASKING IF IT WAS CHANGED FROM MICROSOFT DRIVER AND WHY? REPAIR SERVICE DID NOT WARN THIS CHANGE.
  CAN ANYONE HELP.
  SAPPHIRE.

  The device driver can say Arcsoft because it may have provided to Microsoft by them.
  In Device Manager, open the Properties window for the drive, and then click the driver tab, then update driver...  Click the search selection automatically. If it finds a driver, let it install.

  If the drive still cycles, then you can have a bad drive. If it is still under warranty, contact the place of repair for repair or replacement.

  SC Tom

• My drive E guard opening and closing

  E cd/dvd drive keeps opening and closing without disk in it. Whenever I close it it just opens again

  Hello

  1 did you change on your computer?

  2 did you receive an error message?

  3. what type of device is your E drive?

  Method 1:

  I suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to follow the link and check.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

  See also:

  Optimize Windows Vista for better performance http://windows.microsoft.com/en-US/windows-vista/Optimize-Windows-Vista-for-better-performance

• CD drive does not open and the light does not work

  original title: single CD player problem

  The problem with my CD player seems to be unique I can't find an answer, or someone else with the same problem online.

  My computer is custom built, the CD player lasted me 1.5 years no problem, not until one day I realize, it does not open and the light does not work on it, I ordered a new drive and installed that one, still does not work. so, I replaced the SATA cable which connects to the motherboard, still does not.

  When I go to my computer the drive appears but when I right click > eject it says: "year error occurred while ejecting CD drive D".  It also appears in devices such as SCSI CdRom Device Manager but I am not sure if it's actually my CD player.

  I also tried troubleshooting http://support.microsoft.com/gp/cd_dvd_drive_problems and no solution.

  WTFFF ideas? I really hope that its not the motherboard

  There are two cables you need to connect to the drive, one for data and one for power.  You must connect both training at work.  If you only have the data cable is plugged and not cable power which would be a possible cause of the problem that you see.

  "Ryanb1290" wrote in the new message: * e-mail address is removed from the privacy... *

  Sorry, im just of knowledge about computer hardware.  you say that I should try a different agreement or another port to plug in?

  I tried to connect on a couple different SATA ports on the motherboard.

• How to stop windows during the opening and closing of the discoloration

  Windows until today used to break open and closed but now that they fade in and out.  Is there a setting that would avoid this?

  Hi Dmkg,

  1. when exactly this problem occurs (it is the opening of any application or is it when the computer starts and stops)?
  2. Since when are you facing this problem?
  3. any recent change in software/hardware on your computer?

  Method 1:

  Try to perform a system restore to restore the work correctly the settings

  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions
         
  Method 2:
     
  Try the following steps:

  a. click on Control Panel.
  b. click view by: large icons.
  c. click on "Performance Information and tools".
  d. click on adjust 'Visual effects '.
  e. There will be three points on the line indicating the word "Bland" as the first string of characters on each line.
  f. uncheck the box in front of each of these three lines and then 'OK' everything and regulate
   
  Also be sure to animate windows when reduced and enlarged is checked
      
  Method 3:

  I recommend you perform the clean boot.
   
  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Menu start keeps opening and closing and opening several times. Can you help me?

  My Start menu keeps opening and closing and prevents me from doing anything.  Do you know what I can do to fix this?  I don't am not technical at all so would like answers that are easy to implement, if possible.

  Thank you.

  This could be a problem of keyboard with the Windows key.  If it is a desktop computer, try another keyboard. When a laptop that will be more difficult to test. Looking for debris or rigidity.

• CD drive keeps opening and closing by itself

  My CD tray keeps opening and closing by itself. In addition, I can't open it in the button, I need to go from my and eject it.

  I checked the bios and everythings fine; even updated.

  I removed the front panel

  I scanned with MalwareBytes malware; A large number of files but no associated with cd player

  I went once cd players

  I pulled the canned air into the lens

  That's all I did, to no avail.

  I came to the conclusion that it is a virus, because it is not that when starting and I can push the button to open it, even in safe mode.

  Although no antivirus can find it, and I can't find anything winscript/wscript in the Task Manager.

  Help, please.

  Thanks for the reply.

  1. the model is Packard Bell imedia S3840

  2. No, apart from the installation of the Sims 3, if you count that.

  3. I want to say that the problem still persists in Mode without failure.

  Method 1: Did, did not work.

  Method 2: Still did not work; I remember doing a couple of weeks ago, when he started.

  Method 3: I've updated a long time ago already (like I said: "updated")

  Thanks for the reply, but I've already fixed:

  The button to eject the disc has been blocked; and I had to go out for a minute and then put it in.

  Thank you!