ONVIF queries are slow (SNC-DH240, CNS-CH140)

We have problems with slow responses to the requests of the ONVIF (e.g. GetCapabilities, GetProfiles, GetStreamingUri).

The demands of work, but there is a delay of 2 seconds between the HTTP POST of the client computer and the HTTP 200 OK from the Sony device. This has been verified with WireShark.

This happens with both our cameras Sony, SNC-DH240 and SNC-CH140 models.

This does not happen with devices from other manufacturers ONVIF.

Any ideas?

Thank you and best regards,
Stéphane Pigeon
Senior Software Developer
Visual defence Inc.

Firmware upgrade solved the problem... duh!

Still a bit slow to react (0.5 second), but I can live with that.

Sorry for the post.

Tags: Sony Products

Similar Questions

  • Satellite Pro M70-132: excellent WiFi connection but the pings are slow

    Hi all...
    My Satellite Pro M70-132 have problems with Wi - Fi connections (WiFi built in)... Generally, when the connection is excellent (indicator of windows), the pings are slow - very long time: 1212ms, 325ms, 645ms, 2112ms, 91ms, s 168ms... etc 'demand time limit has expired' (or sth like this).
    I have updated with the latest version of the Intel WiFi driver - it does not work...
    I installed new system - it does not work...

    Is it possible, that LAN WiFi is dead on my M70-132? How can I check before sending my 'Toshi' to the service?

    (BTW - built-in Bluetooth has been switched off...)

    I was tempted to access with several AP and also ad hoc. Every time, same results... connection strong-great but pings are slow... and often ping timeout...

    The IP address has been set manually and automatically - it does not work... too multidimensional :-(

    It's not metter WEP encryption is enabled, 'on' or 'off' and no authentication method does not change the situation with WLAN...

    Post edited by: maxgoldie

    Hello

    If the work of WLan connection and you are connected to the router so I guess everything's ok.
    Time to ping depends on not always the strength of the signal.

    If you ping other ip on the net if the time depends on the provider and type of connection.
    But if you ping your WLan router and it s very slow so it s a bit strange.

    If you think there could be something wrong with the Wlan card then you can try asking for help ASP.

  • In 2007, I bought an iMac G5 and my safari videos are slow and jerky. What can I do?

    In 2007, I bought an iMac G5 and my safari videos are slow and jerky. What can I do?

    They are cutting and slowly because the version of Safari running on 10.4 Tiger is very outdated.

    And it's not just v10.4 is the question, but most of the video content requires Flash. The minimum requirement for Flash is...

    • Intel Core™ Duo 1.83 GHz or faster processor
    • Mac OS X v10.6 or later version
    • Latest versions of Safari, Mozilla Firefox, Google Chrome and Opera
    • 512 MB of RAM; 128 MB graphics memory
  • I gave a friend my password and I think that he abuses my downloads are slow, how can I stop this

    disconect ps3 of blank media

    I gave a friend my password and I think that he abuses my downloads are slow, how can I stop this

    Hello

    ·        What operating system is installed on the computer?

    ·        What browser do you use to download?

    Method 1: If you use Internet Explorer, then you can try the steps from the link below and check if it helps:

    Internet Explorer is slow? 5 things to try

    http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performance

    Method 2: I would say as you reset the password and check to see if it helps:

    What is WPA security network key/password for my wireless router?

    http://help.virginmedia.com/system/selfservice.controller?configuration=1002&PARTITION_ID=1&TIMEZONE_OFFSET=&usertype=&VM_CUSTOMER_TYPE=cable&cmd=VIEW_ARTICLE&article_id=245759

    How to change the wireless network password

    http://help.virginmedia.com/system/selfservice.controller?configuration=1002&PARTITION_ID=1&TIMEZONE_OFFSET=&usertype=&VM_CUSTOMER_TYPE=national&cmd=VIEW_ARTICLE&article_id=2775

    You can also post your query on Virgin Media forum for additional help:

    http://community.virginmedia.com/

  • photos in windows 7 are slow to become populated, can you help me

    photos in my windows 7 are slow to become populated ar appear not all al.  I explore 9. changing size does not help

    Hi William,.

    1. Exactly how you try to view pictures? It is through a Web site or it is saved locally on your computer?
    2. Are you facing problems of visualization of photos online? If Yes, is it limited to a Web site?
    3. What web browser specific problem?

    If you are facing problems with images online, then try the instructions below:

    Sometimes a Web site you visit doesn't look like you expect it. Images may not appear, menus may be out of place, and text boxes may be blurred together. This can be caused by a compatibility issue between Windows Internet Explorer and the site that you are. When a site is not compatible with Internet Explorer, you'll see the compatibility view button in the address bar.

    Use compatibility mode in Internet Explorer ExplorerInternet 9

    Please post back with the State of the question.

  • the Gallery pages are slow to load second request)

    Can someone take a look at this Web site: www.Sybiline.com galleries are taking too long to load. I reduced the weight of all the images and it has not changed the loading time, and I knew that it wouldn't because that's all is OK, when I made the site.  This problem occurred just before Muse was last updated when the problem " triggers move in the composition in the preview widget .   Therefore, the galleries are slow to load. I use Chrome and my daughter is using the Explorer and the problem is the same.  Can someone tell me how many seconds each gallery takes to load.

    Thank you for your help.

    Liliane

    Take a look at this post on the forum where a similar topic has been discussed of the Site made in Muse of loading very slowly

    Your site has a second a lag here, but loads correctly after that.

    Thank you

    Preran

  • Why this two queries are not same

    Hi all

    Can you please explain this fundamental thing. Why this two queries are different. (10.2.0.3 Solaris Sparc 64)
    create table x1(a1 varchar2(10),a2 number, a3 varchar2(10));
    create table x2(b1 varchar2(10),b2 number, b3 varchar2(10));
    insert into x1 values('X101',1,'XX1');
    insert into x1 values('X101',1,'XX1');
    insert into x1 values('X102',1,'XX2');
    insert into x1 values('X103',2,'XX3');
    insert into x1 values('X104',2,'XX4');
    insert into x1 values('X105',3,'XX5');
    commit;
    
    insert into x2 values('X101',1,'X21');
    insert into x2 values('X101',1,'X21');
    insert into x2 values('X102',1,'X22');
    insert into x2 values('X103',2,'X23');
    insert into x2 values('X104',2,'X24');
    commit;
    
    WITH xx AS (select b1,b2 from x2 where b1 IS NULL)
     select x1.* from x1 ,  xx
      where x1.a1 = xx.b1(+) and  x1.a2 = xx.b2(+) ;
     
    A1                 A2 A3
    ---------- ---------- ----------
    X105                3 XX5
    X104                2 XX4
    X102                1 XX2
    X103                2 XX3
    X101                1 XX1
    X101                1 XX1
     
    6 rows selected
     
    select x1.* from x1, x2 where x1.a1 = x2.b1(+)
        and x1.a2 = x2.b2(+)  and x2.b1 IS NULL;
     
    A1                 A2 A3
    ---------- ---------- ----------
    X105                3 XX5
     
    select b1,b2 from x2 where b1 IS NULL;
     
    B1                 B2
    ---------- ----------
     

    Thank you!
    NA not (sentence of) think of this.
    + (it's one of those things that I really need of don't forget do not forget ;)) +)

    hoek&XE> select x1.*
      2  from   x1
      3  where not exists ( select null
      4                     from   x2
      5                     where  x1.a1 = x2.b1
      6                     and    x1.a2 = x2.b2
      7                    );
    
    A1                 A2 A3
    ---------- ---------- ----------
    X105                3 XX5
    
    1 rij is geselecteerd.
    
    Uitvoeringspan
    ----------------------------------------------------------
    Plan hash value: 816925353
    
    ---------------------------------------------------------------------------
    | Id  | Operation          | Name | Rows  | Bytes | Cost (%CPU)| Time     |
    ---------------------------------------------------------------------------
    |   0 | SELECT STATEMENT   |      |     5 |   100 |     5  (20)| 00:00:01 |
    |*  1 |  HASH JOIN ANTI    |      |     5 |   100 |     5  (20)| 00:00:01 |
    |   2 |   TABLE ACCESS FULL| X1   |     6 |    72 |     2   (0)| 00:00:01 |
    |   3 |   TABLE ACCESS FULL| X2   |     5 |    40 |     2   (0)| 00:00:01 |
    ---------------------------------------------------------------------------
    
    Predicate Information (identified by operation id):
    ---------------------------------------------------
    
       1 - access("X1"."A1"="X2"."B1" AND "X1"."A2"="X2"."B2")
    
    Statistics
    ----------------------------------------------------------
              1  recursive calls
              0  db block gets
              6  consistent gets
              0  physical reads
              0  redo size
            518  bytes sent via SQL*Net to client
            384  bytes received via SQL*Net from client
              2  SQL*Net roundtrips to/from client
              0  sorts (memory)
              0  sorts (disk)
              1  rows processed
    
  • Why the out put of the queries are not compatible?

    Why the out put of the queries are not compatible for the same object?
    -----------------------------------------------------------------------------

    SQL > select table_name, blocks from user_tables where table_name = 'ENTRANTS ';

    TABLE_NAME BLOCKS
    ------------------------------ ----------
    ENTRANTS * 0 *.

    ---------------------------------------------------------------------------

    SQL > select count (*) in incoming.

    COUNT (*)
    ----------
    * 200000 *.

    Beacause after insertion of 200000 enties, table user_table not but I have statistics and statistical data not updated before you query the user_table. Use analyze, command to get new statistics for this table.

  • How to find files that are slowing down my computer

    I saw crazy files but I don't remember where I saw them.

    I saw crazy files but I don't remember where I saw them.

    Generally files, in itself, is not slowing down your computer.  Just to have files on your hard disk (because it is not completely filled) means very little - this is when things run / run they can cause problems.

    How to perform a clean boot for a problem in Windows 8, Windows 7, or Windows Vista

    http://support.Microsoft.com/kb/929135/en-us

    The less you have to run all the time, most things you want to run will perform:

    Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know using Google (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

    You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

    Search for malware:

    Download, install, execute, update and perform analyses complete system with the two following applications:

    Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

    Search online with eSet Online Scanner.

  • Computer performance are slow and unresponsive in the middle of the running applications

    Original title: Volsnap error, VSS, registry handle leaks, the drivers won't load is not etc.

    Little by little over the last few months, my computer has been slowing down, suddenly "not responding" in the middle of a program and a few other oddities.  I can't identify when this started because he was progressive.  I had to replace an old drive SSD C and when I did, I also bought a new copy of Windows 7 Prof 64 bit SP1.  Drive C is now SATA 6.

    Specs are adequate, CPU i7 930, 16 GB ram, 2 7200 1 TB WD drives each, 1 WD 'green' 2.5 SATA 6 GB, an Intel SSD SATA2 M225 and a Corsair Force SATA 6, which is the 'new' drive C.

    First mistake, as mentioned above is:
    Log name: System
    Source: volsnap
    Date: 28/08/2012-06:46:26
    Event ID: 8
    Task category: no
    Level: error
    Keywords: Classic
    User: n/a
    Computer: mg - PC
    Description:
    Flush and hold writes operation on E: has timed out while waiting for a written statement of the volume control.
    The event XML:

     
       
        8
        2
        0
        0 x 80000000000000
       
        131589
        System
        mg - PC
       
     

     
       
       

        E:
        000000000200300000000000080006C 0000000000000000005000000000000000000000000000000
     

    Following error, which is quite common VSS:
    Log name: Application
    Source: VSS
    Date: 27/08/2012-22:38:52
    Event ID: 12341
    Task category: no
    Level: WARNING
    Keywords: Classic
    User: n/a
    Computer: mg - PC
    Description:
    Volume Shadow Copy WARNING: VSS past seconds 0x000000000000002b try to rinse and keep the volume \\?\Volume{51e5830d-560c-4d2f-9ed8-343e5dbe5b8c}\.  This could cause problems when the other parts in the cliché of the time-out value for the phase of release-written, and it can cause the creation of snapshots to failure.  Try again when the disk activity is less can solve this problem.

    Operation:
    The execution of an asynchronous operation

    Context:
    Current status: flush and hold writes
    Volume name: \\?\Volume{51e5830d-560c-4d2f-9ed8-343e5dbe5b8c}\
    The event XML:

     
       
        12341
        3
        0
        0 x 80000000000000
       
        73849
        Application
        mg - PC
       
     

     
        0x000000000000002b
        \\?\Volume{51e5830d-560C-4D2F-9ed8-343e5dbe5b8c}\
       

    Operation:
    The execution of an asynchronous operation

    Context:
    Current status: flush and hold writes
    Volume name: \\?\Volume{51e5830d-560c-4d2f-9ed8-343e5dbe5b8c}\
        2D20436F64653A20434F524C4F564C4330303030303239302D2043616C6C3A20434F524C4F564C4330303030303233332D205049443A202030303030323632382D205449443A202030303030353532302D20434D443A2020433A5C57696E646F77735C73797374656D33325C76737376632E6578652020202D20557365723A204E616D653A204E5420415554484F524954595C53595354454D2C205349443A532D312D352D313820
     

    Following error - register cast handles
    Log name: Application
    Source: Microsoft-Windows-user profiles Service
    Date: 30/08/2012 20:07:49
    Event ID: 1530
    Task category: no
    Level: WARNING
    Keywords:
    User: SYSTEM
    Computer: mg - PC
    Description:
    Windows detected your registry file is still in use for other applications or services. The file will be unloaded now. Applications or services that keep your registry file may not work properly thereafter.

    DETAIL-
    Register of the 1 handles user are escaped from \Registry\User\S-1-5-21-3328621373-938311138-4019764245-1001:
    800 (\Device\HarddiskVolume2\Windows\System32\winlogon.exe) process has opened \registry\user\s-1-5-21-3328621373-938311138-4019764245-1001-cles

    The event XML:

     
       
        1530
        0
        3
        0
        0
        0 x 8000000000000000
       
        74995
       
       
        Application
        mg - PC
       
     

     
        Register of the 1 handles user are escaped from \Registry\User\S-1-5-21-3328621373-938311138-4019764245-1001:
    800 (\Device\HarddiskVolume2\Windows\System32\winlogon.exe) process has opened \registry\user\s-1-5-21-3328621373-938311138-4019764245-1001-cles

     

    Next error - another problem of registry on the leak and be in use
    Windows detected your registry file is still in use for other applications or services. The file will be unloaded now. Applications or services that keep your registry file may not work properly thereafter.

    DETAIL-
    Register of the 1 handles user are escaped from \Registry\User\S-1-5-21-3328621373-938311138-4019764245-1001:
    800 (\Device\HarddiskVolume2\Windows\System32\winlogon.exe) process has opened \registry\user\s-1-5-21-3328621373-938311138-4019764245-1001-cles

    Last error I hope - system boot or boot startup failed to load drivers
    The next (s) starting or starting system could not load:
    UimBus
    Uim_IM
    Uim_VIM

    I apologize for this long post, but I thought that some of them might be related, and I'd appreciate any help I can get like this had been a machine very good and fast until the last month or two.

    33000

    Hello
    The three files that does not loaded at startup proved a Paragon backup facility that I had deleted.  I found in the registry and is more had this error.

    Slow and sudden episodes of "not responding" continues in safe mode, safe mode with network and boot.

    Mr. Fixit noted that I had too many programs loaded on startup that I already knew and will work hard to stop.  It has been useful in this gave me a list of the programs that did not need to start.  Some of this list was a distant base such that suggests my AV does not need to start, but some of it was useful.

    I then started to keep track of programs that seemed more likely to slow down or freeze the machine.  I reduced to one of my drives 3 1/2 inch WD 7200 and my 25 M Intel SSD.

    I ran Intel SSD toolbox and it showed no errors and no updates.  Estimated of life was about 95% and I had the car for 2 years.  There is an option to click that says "SSD Optimizer", and I suspect it is similar to a manual pad because it is one of their first records.  I "optimized" and it was immediately faster.  Intel said to do once a week or two and I never did.

    I ran HD Tune Pro on the WD and it showed a bad CRC so that a warning on the drive, which is less than a year. HD air said the drive is bad OR a cable is bad.  I had a backup, Acronis Disk which took most of the data and I also had the cloud with versioning backup.

    Knowing that the food had been replaced by a technician who had twisted power cables, because most of the readers had been asked in reverse, I attacked this first.  I turned every drive so that the connection of the power supply has been on the same side and reconnect the cable after doing my best to straighten out and flatten the wire.  I then installed a new SATA cable on the WD drive in question.

    Then, wanting to be done with it once and for all and ensuring that I could save between Acronis and my backup of cloud, I used the command line in Administrator, then to Drive E tools mode, error checking.  I ticked the boxes: analyze and attempt to recover bad sectors and automatically fix file system errors.  A reboot and the process had started.

    When you are finished, I seemed to have a catchy machine and some of the programs which often hung, is done in two days.  Programs were pretty much intact, but most of the files had been erased from the disk.  I have restored all wiped files and files of Acronis and the cloud and everything seems to work perfectly.

    Unable to help me, I ran HD Tune Pro and made a mistake (not fast) full scan on the E drive.  She came back without error.

    I know that this drive can fail again, and above all, I couldn't have been this aggressive if I had not had 2 backups.

    Do you think it will fail again?  I decided that, if so, I'll get another SSD (or two) to replace.  Although it will cost you much, I fear that hard drives are not very well made and I don't want to go through this again - and maybe not be so lucky.

    Thanks for your help and I'll post again if it fails in the near future.  Someone knows something about the new SSD Plextor?  Or would you go with Samsung?

    Thanks again.

  • Cursors in the development in the latest Lightroom module are slow to respond

    I've updated to the latest Lightroom and my problem is not as bad as some. However, it's boring.

    When I click on a slider to move it, the response is slow, and sometimes I have to click it a second time to get attached to my cursor so that I can move it.

    The other problems that people seem to have is caused by the graphics processor. But here, I have a Quadro graphics card and whether or not the gpu is enabled or not makes no difference.

    I have a lot of memory and eight processor so I don't really think there is a problem with my pc. Any ideas?

    Hello

    The version of Lightroom is that I downloaded yesterday. Howevr I just uninstalled and reinstalled Lightroom and now everything seems in good condition. The sliders are responds ok. Thank you

  • The outputs (values) following queries are equal?

    Are the outputs (values) of the following explains equal of queries by Oracle?
    SQL> select to_char(sysdate+1/24,'yymmddhh24') from dual;
    
    TO_CHAR(
    --------
    09081513
    
    SQL> select to_char(sysdate, 'yymmddhh24miss') from dual;
    
    TO_CHAR(SYSD
    ------------
    090815130000

    I think it's good.

  • Why Firefox type and slider are slow to a normal start, but everything works fine when I reboot in safe mode?

    When I open FIrefox normally, the movement of the cursor is very jerky - seems stuck on each link. In addition to typing in any box is delayed. When I restart with disabled modules and in safe mode, the cursor moves very well and typing is normal. I disabled all my Add - ons, but that doesn't seem to help as whenever I restart, the cursor jerky and delayed typing again. What's wrong?

    Try disabling hardware acceleration in Firefox.

    In the Firefox Safe mode, these changes are effective:

    • all extensions are disabled
    • the default theme is used (no persona)
    • userChrome.css and userContent.css are ignored
    • the layout of the default toolbar is used
    • the JIT Javascript compiler is disabled
    • hardware acceleration is disabled
    • plugins are not affected
    • preferences are not affected
  • The Gigashot A40FE mpg files are slow when played on PC

    I recently bought the A40FE and well recorded video playback on the LCD is perfect, when I copy on my XP PC, or play directly from the hard drive of the A40FE, all plays back to slow, jerky and it wasn't there a 'noise' around the objects being focused on.
    I formatted the drive, reset the camera, but still exactly the same. I tried on two other PCs, and when I navigate to the Gigashot, it blocks in terms of Windows Explorer. Tried to ImageMixer, foolishly, but it seems to get worse :(

    Am I missing something really stupid here?

    Hello

    The film is correctly displayed on the external LCD you but if you play it on your PC then the movie does not play correctly. Is this good?

    I think you should test some different players. Try the small free tool called VLC player.
    It plays most audio and video files and it s free!

    In addition I recommend installing some codec packs.
    I use the K-Lite Mega code pack that contains all the necessary video codecs.

    Install it and check the quality of reading...

  • games and software are slow and is not compatible with windows 7

    When I install games they donot executed or it hangs the system. I tried to run in compatibility mode, but no response. I am using windows 7 ultimate and there are many compatibility problems related to him. Prior to the upgrade of windows software run quickly in windows xp Service Pack 3, but after the upgrade
    hang................
    hang....................
    and...
    only to hang
    What to do now?
    and why the software do not work properly?
    is it possible to deal with this operating system to run this software?
    need quick help?

    What are the games and when are they published? If they are more than a couple or 3 years, you will probably have problems real since Vista and 7 so fundamentally changed. Have you been to game publishers Web sites to see if they work?

    You can get lucky if your system supports virtual XP, games running on the virtual machine. VP Tech Services

Maybe you are looking for

  • El Capitan has taken my SD card reader

    Since my upgrade to El Capitan last week, my sd card reader does not work. She is not in the hardware. I did the reset where you unplug for 30 seconds. I did the control + apple + r + thing p and the card reader worked for only a few days. I can't do

  • Missing menu entry

    I looked in the help file to find out how to hide the identity of the multiple recipients. Several suggestions were offered, all referring me to different parts of the entry of the account settings in the Tools menu. But there is no entry of account

  • Set property of Labview DIAdem

    Hi all I am a beginner in DIAdem, and I need help... I did a Labview application that generates tdms files. I also create a scipt Diadem to analyze values PDM and a layout of DIAdem to communicate these data. My problem is I want to set a property of

  • Photosmart 7520e - increment the names of scanned files

    When scanning in documents is it possible to have file names automatically increment.  My Photosmart old (C5200 I think) used to do. Any help gratefully received.

  • Anyone know the shortcuts to activate wireless keyboard?

    I've looked everywhere but can't find the answer. Forum suggests the Fn and F3 keys, but allows only to vol. mode I have an Acer Aspire E5... Please help!