The outputs (values) following queries are equal?
Are the outputs (values) of the following explains equal of queries by Oracle?SQL> select to_char(sysdate+1/24,'yymmddhh24') from dual;
TO_CHAR(
--------
09081513
SQL> select to_char(sysdate, 'yymmddhh24miss') from dual;
TO_CHAR(SYSD
------------
090815130000
I think it's good.
Tags: Database
Similar Questions
-
I am an absolute beginner to Labview, and I have so many problems that I don't know if I'll be able to finish it, even if it seems that it should be so simple.
Here is the complete program, that I need to create, and then I'll ask my question and I hope I can get help on what is possible on this forum.
I need to have an oscilloscope and a generator of signals communicate. I need to start a frequency and the power of the signal generator. The oscilloscope read this power as a tension (I've got this part so far). Then I need to compare this voltage to an assigned value and if they are different, adjust power accordingly on the signal generator until the voltage is equal to (with a tolerance) and the value of the rated voltage. Once this is done, I need to read the power of the signal generator and then move to the next frequency.
The hardest part for me so far and the question for this forum is: how to compare a value of output with a value assigned and so different, adjust the output value until they become equal, remembering that I'm adjusting a power on the signal generator to get equal tension on an oscilloscope?
I hope this question makes sense. So I'm back to this program and I don't have anyone in my group who can help me, so I'm desperate. Thanks in advance.
davedude,
The short answer is to use the range of comparison functions. To make a comparison with a tolerance, you can use the cooker and force function. Always keep the Help window open context while you program - it explain the inputs and outputs and describe the basic function of the node that the cursor. One of the outputs is a Boolean value called in range? That wire to the terminal of selector of a box structure. In the case of 'out of Range', carry out the adjustment.
The entire program should be in a while loop if all continues to repeat until done or until a button is pressed.
A good approach for this kind of problem is to use a state machine, which can be implemented as a while loop that contains a structure of housing. There are examples that come with LabVIEW.
Lynn
-
Read the output values after each step runs in the User Interface of LabVIEW
Hi all
Development environment: TestStand 2010 SP1 and LabVIEW 2010 SP1
Problem: is there a way to run the following steps programmatically and get values out of each of them?
I have already extended a bit a complete interface IO for TestStand load any sequence, choose among the measures and execute step by step (something as an alternative to the steps run selected). What I'm trying to do is to add some actions between each step and do in the UI (I can't change the sequence!), so I start the NewExecution with some previously configured InteractiveArgsParam and option breakAtFirstStep set to true. Eventually I do just something like step over when debugging the sequence and it works well, but I didn't do well a way yet to read the output values of the place...
So, if I wait before the end of the run I can read my results by treating the ResultObject, but it works only after the completion of the test sequence. Because I wanted to stop after each step, read the values, do some actions and continue to the next step, I've tried to register a running Trace event reminder View Manager. I see that after each step is executed, this event is fired, but when I try to read that a ResultObject returned in the event data it is not filled with values (ResultList seems to be empty?). Is this a correct behavior or maybe I'm reading the wrong way? (It's the same VI regarding the reading of the ResultObjects after the sequence ends and there it works very well for tables, containers and other types of data).
As I mentioned I can't change Test sequences, I can not add a UImessages.
What are my options? If the trace event returns output all the values from each steps or is it just used to check the status? Or maybe there's a completely different approach to this issue?
Thanks in advance for your suggestions,
Best regards.
When you manipulate the UIMessage trace (you need this before the return of the event or you will present the race conditions), download myuimessage. Thread. Then call Thread.GetSequenceContext (0, & Iplease).
And then on the context of the sequence, either go to PreviousStep.Result if it exists, or watch Locals.ResultList.
Trace events occur between the steps executed step the more recently is the previous step, but it is also a trace event to the beginning before any measure have run at this time, there will be a previous step.
Hope this helps,
-Doug
-
[Insert values in table with the output values of the procedure]
Hello
I wrote the following procedure
<>PROCEDURE
create or replace procedure experience is
cursor curexp is e.employee_id, trunc (months_between (jh.end_date, jh.start_date)) select exp, e.first_name, e.last_name, d.department_name, l.city, c.country_name, l.street_address
e employees, job_history jh, departments d, places the country c
where e.employee_id = jh.employee_id
and e.department_id = d.department_id
and d.location_id = l.location_id
and l.country_id = c.country_id;
v_result curexp % rowtype;
Start
Open curexp;
loop
extract the curexp in v_result;
When the output curexp % notfound;
dbms_output.put_line (v_result.employee_id |) ' '|| v_result.exp | ' '|| v_result.first_name | v_result.last_name);
end loop;
end;
< / procedure >
to get the values as below
< output >
101 NeenaKochhar 49
101 NeenaKochhar 40
102 66 LexDe Haan
114 DenRaphaely 21
122 PayamKaufling 11
176 helenethibaut 9
176 helenethibaut 11
200 JenniferWhalen 69
200 JenniferWhalen 53
201 MichaelHartstein 46
< / output >
After that, I created a table as below
< table >
create table exp_recored (employee_id number, number of exp_mon, name varchar2 (20))
< /table >
Now I want to insert values in the table above
I tried like below
< Insert >
Start
insert into exp_recored (employe_id, exp_mon, name) values (experience);
end;
< / insetr >
but I got error like below
PL/SQL: ORA-00947: not enough values
Could someone tell me please on the above point
Thank you
Thelakthelakbe wrote:
HelloI tried too
During this operation
Start
insert into exp_recored (employe_id, exp_mon, name) values (v_result.employee_id, v_result.exp, v_result.first_name | v_result.last_name);
end;I got the below error
PL/SQL: ORA-00984: column not allowed here
You can try this?
CREATE OR REPLACE PROCEDURE experience IS CURSOR curexp IS SELECT e.employee_id, TRUNC(months_between(jh.end_date,jh.start_date)) exp, e.first_name, e.last_name, d.department_name, l.city, c.country_name, l.street_address FROM employees e, job_history jh, departments d, locations l, countries c WHERE e.employee_id=jh.employee_id AND e.department_id=d.department_id AND d.location_id =l.location_id AND l.country_id =c.country_id; v_result curexp%rowtype; BEGIN OPEN curexp; LOOP FETCH CUREXP INTO V_RESULT; EXIT WHEN CUREXP% NOTFOUND; INSERT INTO EXP_RECORED (EMPLOYEE_ID,EXP_MON,NAME) VALUES (V_RESULT.EMPLOYEE_ID,V_RESULT.EXP,V_RESULT.FIRST_NAME||V_RESULT.LAST_NAME); END LOOP; COMMIT; END;
-
Get the max value with other areas
Hi all
I have a table as below
Value name
- - - - - - - - - - - - - - - -
A1 5
A3 10
A2 7
A2 9
A1 10
What I get is the max (Value) and with the consolidation of its name
Value name
- - - - - - - - -
A2 16
Thank you
Alex
Published by: user8606416 on June 1, 2011 10:17
Published by: user8606416 on June 1, 2011 10:26Depends on how you feel on one of the links of:
SELECT name, value FROM (SELECT name, SUM(value) FROM table GROUP BY name ORDER BY 2 DESC) WHERE rownum = 1 SELECT name, SUM(value) FROM table GROUP BY name HAVING SUM(value) >= ALL (SELECT SUM(value) FROM table GROUP BY name)
among many other methods. The first takes a single arbitrary registration in the case of a tie, and the second shows all the related records.
John
- It is probably a very simple question, but I wonder how the elements on a page of output, because they are treated, instead of having to wait for the entire page processing to do before you post anything. Does make sense? Thank you!
-
Decode, but leave the other values as they are
Hello. In my application, I want to change the value of '0' to "Ej Fakturerad". But it dosnt work.
Output:select c.id, c.name, count(i.invoice_nr) from customer c left join invoice i on i.customer_id = c.id group by c.id, c.name order by c.id
This will give me correct values in the County. But I would change the zero to a text.ID NAME COUNT(I.INVOICE_NR) ---------- ---------------------------------------- ------------------- 100001 100002 Bengt Larsson 0 100003 Nils Åkerlund 2 100004 Biblioteket Höken 3 100005 Lena Ekman 3 100006 Stadsarkitektkontoret i Flen 4 100007 Dagiset Myran 0
I tried, but it leave out my other results, when well even the 0-> well worked.
Output:select c.id, c.name, decode(count(i.invoice_nr),0,'Ej') from customer c left join invoice i on i.customer_id = c.id group by c.id, c.name order by c.id
Regards, Johan.ID NAME DE ---------- ---------------------------------------- -- 100001 100002 Bengt Larsson Ej 100003 Nils Åkerlund 100004 Biblioteket Höken 100005 Lena Ekman 100006 Stadsarkitektkontoret i Flen 100007 Dagiset Myran Ej
decode(count(i.invoice_nr),0,'Ej',count(i.invoice_nr))
-
Hello
I'm trying to get a set of results that has following criteria
-the lines using the same column WEL_FK, I would like to than the more recent date
and in the most recent date of the highest weight. (Sorte d'un max() dans un max()) for each WEL_FK).
s ' there is a line that has no other matches WEL_FK. s (such as line 8)
It should still return this line.
PER_PK WEL_FK A_DATE WEIGHT
---------- ---------- ---------- ----------
1 1 4 22 - 10 - 2010
2 1 4 2010-11-23
3 1 6 2010-10-22
4 3 2 2010-10-22
5 3 2 2010-11-23
6 3 2 2010-10-22
7 4 5 22 - 10 - 2010
8 6 5 2010-10-22
9 6 6 2010-10-21
10 6 2010 - 10 - 22 4
10 selected lines.
Expected RESULTS
PER_PK WEL_FK A_DATE WEIGHT
---------- ---------- ---------- ----------
2 1 4 2010-11-23 because there the last date within the same foreign key even if not highest weight
5 3 2010 - 11 - 23 2 because he has the last date within the same foreign key, wts. are equal
7 4 5 22 - 10 - 2010 because there is no other line with this WEL_FK
8 6 2010 - 10 - 22 5 because he has the date the most recent with higher weights.
I am able to get close to what I want using the SQL below gives me the correct lines
but don't tell me does not 'weight' or the 'PER_PK' column
I tried to find a way to choose the highest value of 1 ROW and 1 column
with multiple values, but think that I dug myself in a hole.
When I add in the PER_PK above, it sure gives me again every 10 rows.
SELECT wel_fk,
LTRIM (Max (SYS_CONNECT_BY_PATH (a_date, ','))
DUNGEON (DENSE_RANK LAST ORDER BY curr), ',') as employees
FROM (SELECT wel_fk,
a_date,
ROW_NUMBER() over (PARTITION BY wel_fk ORDER BY a_date) AS curr,
ROW_NUMBER() over (PARTITION BY wel_fk ORDER BY a_date)-1 AS prev
TEST)
GROUP BY wel_fk
CONNECTION BY prev = curr PREREQUISITE AND wel_fk = PRIOR wel_fk
START WITH curr = 1;
WEL_FK EMPLOYEES
---------- --------------------------------------------------
1 2010-10-22,2010-10-22,2010-11-23
3 2010-10-22,2010-10-22,2010-11-23
4 on 10-22-2010
6 2010-10-21,2010-10-22,2010-10-22
==========================================================
I explored analytical, connect by is, subqueries, wm_concat, SYS_CONNECT_BY_PATH, etc. with max () for days and get real close
but somehow it is turned off.
If you are able to provide the actual SQL solution, ideally using what I already have, would be appreciated.
Thank you.
the_sqlTry this:
WITH src AS ( SELECT per_pk, wel_fk, a_date, weight, MAX( a_date ) OVER (PARTITION BY wel_fk ORDER BY a_date RANGE BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING ) latest_date, last_value( weight ) OVER (PARTITION BY wel_fk ORDER BY a_date, weight RANGE BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING ) max_weight FROM TEST ) SELECT per_pk, wel_fk, a_date, weight FROM src WHERE a_date = latest_date AND weight = max_weight ; PER_PK WEL_FK A_DATE WEIGHT ---------------------- ---------------------- ------------------------- ---------------------- 2 1 2010/11/23 4 5 3 2010/11/23 2 7 4 2010/10/22 5 8 6 2010/10/22 5
-
Avoid namespace in the output.
Hello
I am using a transformation to eliminate one of the attributes 'ErrorMessage' < PersonImage > with the help of an "if" condition Refer to OTN: XML attribute hiding if there is no data/value
I get a result as follows:
----------
< outputVariable >
-< part xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance" name = "payload" >
-< response xmlns = "http://xmlns.monash.edu.au/its/rms/ImageProcessResponse" >
-< Summary >
-< total >
< transformed > 4 < / transformed >
< defective > 0 < / defective >
< successful > 4 < / successful >
-< Server1 Machine = "1" Name = "Basil1" >
< successful > 4 < / successful >
< failed > 0 < / failure >
< / Server1 >
-< Server2 Machine = "2" Name = "Basil2" >
< successful > 4 < / successful >
< failed > 0 < / failure >
< / Server2 >
< / total >
< terminate / >
< / Summary >
-< detail >
-< PersonImage >
"< rms:PersonImage ID ="12410276"FileName ="12410276.jpg"Fetched =" Y "S1 = S2" Y' = 'Y' xmlns:rms = "http://xmlns.monash.edu.au/its/rms/ImageProcessResponse" / > "
"< rms:PersonImage ID ="12620203"FileName ="12620203.jpg"Fetched =" Y "S1 = S2" Y' = 'Y' xmlns:rms = "http://xmlns.monash.edu.au/its/rms/ImageProcessResponse" / > "
"< rms:PersonImage ID ="12790974"FileName ="12790974.jpg"Fetched =" Y "S1 = S2" Y' = 'Y' xmlns:rms = "http://xmlns.monash.edu.au/its/rms/ImageProcessResponse" / > "
"< rms:PersonImage ID ="12983233"FileName ="12983233.jpg"Fetched =" Y "S1 = S2" Y' = 'Y' xmlns:rms = "http://xmlns.monash.edu.au/its/rms/ImageProcessResponse" / > "
< / PersonImage >
< / details >
< / answer >
< / part >
< / outputVariable >
-----------
But I'm unable to remove the namespace after each release of < PersonImage >. I wanted the output as follows:
-----------
< outputVariable >
-< part xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance" name = "payload" >
-< response xmlns = "http://xmlns.monash.edu.au/its/rms/ImageProcessResponse" >
-< Summary >
-< total >
< transformed > 4 < / transformed >
< defective > 0 < / defective >
< successful > 4 < / successful >
-< Server1 Machine = "1" Name = "Basil1" >
< successful > 4 < / successful >
< failed > 0 < / failure >
< / Server1 >
-< Server2 Machine = "2" Name = "Basil2" >
< successful > 4 < / successful >
< failed > 0 < / failure >
< / Server2 >
< / total >
< terminate / >
< / Summary >
-< detail >
-< PersonImage >
"< rms:PersonImage ID ="12410276"FileName ="12410276.jpg"recovered =" Y "S1 = S2" Y"="Y"/ >"
"< rms:PersonImage ID ="12620203"FileName ="12620203.jpg"recovered =" Y "S1 = S2" Y"="Y"/ >"
"< rms:PersonImage ID ="12790974"FileName ="12790974.jpg"recovered =" Y "S1 = S2" Y"="Y"/ >"
"< rms:PersonImage ID ="12983233"FileName ="12983233.jpg"recovered =" Y "S1 = S2" Y"="Y"/ >"
< / PersonImage >
< / details >
< / answer >
< / part >
< / outputVariable >
-----------
Very much appreciate your help with this.
Thank you and best regards,
RakeshYou are syaing that you want to remove the definition of namesspace, but keep the namespace alias in the XML file. This translates namespace not valid. I shouyld keep this, it's XML messages valid. The request of the appellant to be aligend to XML standards, you should change.
BTW:
http://orasoa.blogspot.com/2008/12/remove-namespaces-in-OSB-and-bpelesb.html
Marc
-
How to return the highest value in a column of numbers less than a given number
I am a beginner using formulas in number. I have an inventory in a Numbers spreadsheet (v3.6.2). Inventory numbers are in a column. I need to view the last number used or the highest number less than a given value. In my case, it is 9000.
I can put a cell to return MAX and it's cool, but I need to know the number < 9000, MAX.
Hi JS.
SEARCH is your friend here. One of the properties of the LOOKUP function is that it accepts a 'close-match', which is defined as the largest value less than or equal to the search value.
Formulas:
A2: LOOKUP (8999.9999999, D)
B2: LOOKUP(9000,D)
C2: MAX (D)
Kind regards
Barry
-
Alignments of column in the output HTM
Hello. I have a SQL script below which shows 3 columns in a HTM file. It works without error, but I noticed that when the display the output HTM column names are centered, but the column values are all justified to the left. Despite everything I've tried I can't seem to get the names of the columns to align left or column values to focus. Note that in the code below, I tried to use the option JUSTIFY opition on every column, but he seems to have no effect in the output.
Can anyone help?
fixed term
trigger the echo;
Set feedback off;
game check
put in head
set of 99 pages;
set pagesize 50;
set linesize 80;
SET MARKUP HTML ON SPOOL ON HEAD 'report ADDS < TITLE > < /title >-
"< STYLE TYPE =" TEXT/CSS"> <!-BODY {background: ffffc6}-> < / STYLE >.
coil/usr/IBM/WebSphere/AppServerCommunityEdition/repository/default/TTMSWeb/12
22365662123/TTMSWeb-1222365662123.war/scanner_returns_report.htm;
TTITLE "Scan Returns";
Col Device_Status format a13 HEADING "Device status" JUSTIFY LEFT;
Col Total format a5 HEADING "Total" JUSTIFY CENTER;
Col format a15 SECTION staff "Staff" JUSTIFY RIGHT;
Select b.device_status Device_Status, rtrim (count (a.reporter)) Total, c.first_na
me | » '|| c.last_name |' ('| c.Guid |') ' Staff
of scanner_assignment a, scanner_inventory b, pwc_employee c
where a.manufacturer_nm = b.manufacturer_nm
and a.serial_num = b.serial_num
and a.modify_by = c.guid
and trunc (a.return_dt) = trunc(sysdate-1)
and a.modify_by = '& 1' '.
and b.device_status = '0'
and b.device_status in ('0 ','8 ')
Group of c.first_name |' '|| c.last_name |' ('| c.Guid |') ", b.device_status
order of c.first_name |' '|| c.last_name |' ('| c.Guid |') ', b.device_status;
spool off;
output
/I can't get the names of the columns to align left or column values to focus.
Extend your style orders of sheet with the direction of alignment, for example
for example:
SQL> set markup html on entmap off head "" spool on
-
SQL: How to tell the difference between the numerical value and Alpha numeric
Pls check the following requirements and let me know how to prepare the SQL:
1. I want to find the product that begins with Alpha value separately
2. I want to find the product that starts with the numerical value separately
data are the following:
CREATE TABLE prod (product_code VARCHAR2(4) NOT NULL)
Kind regardsINSERT INTO prod VALUES ('L016') / INSERT INTO prod VALUES ('A035') / INSERT INTO prod VALUES ('B001') / INSERT INTO prod VALUES ('1717') / INSERT INTO prod VALUES ('7151') / INSERT INTO prod VALUES ('7019') / INSERT INTO prod VALUES ('0729') / INSERT INTO prod VALUES ('0730') / INSERT INTO prod VALUES ('L007') / INSERT INTO prod VALUES ('C013') / INSERT INTO prod VALUES ('D008') / INSERT INTO prod VALUES ('L021') / INSERT INTO prod VALUES ('0710') / INSERT INTO prod VALUES ('0718') / INSERT INTO prod VALUES ('L005') / INSERT INTO prod VALUES ('0716') / INSERT INTO prod VALUES ('0711') / INSERT INTO prod VALUES ('0701') / INSERT INTO prod VALUES ('0724') / INSERT INTO prod VALUES ('0728') / INSERT INTO prod VALUES ('0714') / INSERT INTO prod VALUES ('0704') / INSERT INTO prod VALUES ('7150') / INSERT INTO prod VALUES ('L024') / INSERT INTO prod VALUES ('L033') / INSERT INTO prod VALUES ('0721') / INSERT INTO prod VALUES ('0708') / INSERT INTO prod VALUES ('0723') / INSERT INTO prod VALUES ('L004') / INSERT INTO prod VALUES ('L018') / INSERT INTO prod VALUES ('0725') / INSERT INTO prod VALUES ('0719') / INSERT INTO prod VALUES ('0726') / INSERT INTO prod VALUES ('0712') / INSERT INTO prod VALUES ('0727') / INSERT INTO prod VALUES ('0703') / INSERT INTO prod VALUES ('TEST') /
Yamen1)select * from prod where translate(substr(product_code,1,1),'#0123456789','#') != '#' 2)select * from prod where translate(substr(product_code,1,1),'#0123456789','#') is null
Ravi Kumar
-
the two equii join and natural join are equall.will both display the output of the same
the two equii join and natural join are equall.will both display even
output?Hello
It keeps you a little test and check yourself?See the link below.
http://psoug.org/reference/joins.html
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production With the Partitioning, OLAP, Data Mining and Real Application Testing options SQL> CREATE TABLE parents ( 2 person_id NUMBER(5), 3 adult_name VARCHAR2(20), 4 comments VARCHAR2(40)) 5 PCTFREE 0; Table created. SQL> SQL> CREATE TABLE children ( 2 parent_id NUMBER(5), 3 person_id NUMBER(5), 4 child_name VARCHAR2(20), 5 comments VARCHAR2(40)) 6 PCTFREE 0; Table created. SQL> SQL> INSERT INTO parents VALUES (1, 'Dan', 'So What'); 1 row created. SQL> INSERT INTO parents VALUES (2, 'Jack', 'Who Cares'); 1 row created. SQL> INSERT INTO children VALUES (1, 2, 'Anne', 'Who Cares'); 1 row created. SQL> INSERT INTO children VALUES (1, 1, 'Julia', 'Yeah Right'); 1 row created. SQL> INSERT INTO children VALUES (2, 1, 'Marcella', 'So What'); 1 row created. SQL> COMMIT; Commit complete. SQL> SQL> SELECT adult_name, child_name 2 FROM parents NATURAL JOIN children; ADULT_NAME CHILD_NAME -------------------- -------------------- Jack Anne Dan Marcella SQL> select adult_name,child_name from parents a, children b 2 where a.person_id=b.person_id; ADULT_NAME CHILD_NAME -------------------- -------------------- Jack Anne Dan Julia Dan Marcella SQL> ed Wrote file afiedt.buf 1 select adult_name,child_name from parents a, children b 2* where a.person_id=b.parent_id SQL> / ADULT_NAME CHILD_NAME -------------------- -------------------- Dan Anne Dan Julia Jack Marcella SQL>
Kind regards
Avinash -
value of the level in hieararchical queries
I'm trying to accomplish a well-known problem turn the channel with column separators.
This is the query that I found when studying the field:
SELECT level, regexp_substr(value, '[^;]+', 1, level) col FROM (SELECT 'val1;val2;val3' value FROM dual ) CONNECT BY regexp_substr(value, ';', 1,level-1) is not null
Surprisingly, it works!
LEVEL COL 1 val1 2 val2 3 val3
The question is how we can use 'level 1' as a fourth parameter of regexp_substr in connect by if clause level value starts with 1?It seems to level 1 is equal to zero then, and the query is to break. In addition the following query
select regexp_substr('val1;val2;val3', ';', 1,0) from dual
Indeed falls with the error message
ORA-01428: argument '0' is out of range
Finally if I change the level setting, it works as expected assuming that level value starts with 1
SELECT level, regexp_substr(value, '[^;]+', 1, level) col FROM (SELECT 'val1;val2;val3' value FROM dual ) CONNECT BY regexp_substr(value, ';', 1,level) is not null
LEVEL COL 1 val1 2 val2 Hope someone can explain to me how it works or share a link to the description of this query processing.
You need to look at the complete picture. Hierarchical queries have 2 START WITH and CONNECT BY clauses. START WITH may be explicit or implicit. Implicit START WITH means build the hierarchy from each line. In any case LEVEL = 1 is to START WITH the line. LEVEL 1 > are generated by CONNECT BY. So LEVEL = 1 is produced independently CONNECT BY conditions. Hope it answers your question.
SY.
-
Prob Winmail.
Receive the error message "the server that you are connected using a security certificate that could not be verified that the certificate CN name does not match the passed value. Do you want to continue? ». This started happening after that my laptop has been reformatted. I have synced with Gmail winmail and followed the instructions to do this correctly. By pressing the tab 'Yes' allows me to use winmail, but it's a little embarrassing.
Using a digital signature? Check the settings under Tools | Options | Security and also tools | Accounts | Mail | Properties | Security.
Also, see here (http://mail.google.com/support/bin/answer.py?hl=en&answer=86382) and make sure that your settings are correct.
Steve
Maybe you are looking for
-
iTunes 12.3.2 - all movies and television shows marked as watched
After application of the latest version of iTunes, almost all of the movies and television shows are now marked as watched. has about 60 movies and TV seeveral marked as unattended. Just 2 movies now marked as unattended? Any ideas? Yes, I suppose I
-
I want to install a game not supported by directx 10, destroy install directx 9 directx 10 capabilities for Crysis and other games supported by directx 10
-
County to return read VISA does not match number of bytes
I encounter an error with a VISA reading. I ask 8 bytes (in number of bytes), but get only 7 return (return number), which causes errors in my code downstream. Curiously, the VISA Read block does not return an error. Any ideas on how to debug this
-
Hi all Just got my Sansa Fuze and thinking, I want to just say how much I'm happy with it, and how I am happy to find such a decent forum. Never been a man of Apple, my last MP3 player has a Rio Karma, but the battery is endangered, unfortunately. Tw
-
Uninstall the informant of refund
I installed sort of informant for a refund and cannot uninstall it. I tried the programs and features, but it doesn't seem to be there. It seems always just after starting a computer asking my login information. I have never connected to the program.