OOP CLASS DOES NOT STOP?

Similar Questions

• After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) restart you device.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

  Council: https://discussions.apple.com/docs/DOC-9892

• Firefox seems to have recently developed seemingly random usually do not remember bookmarks, particularly when the pc does not stop correctly. Thank you

  Firefox seems to have recently developed seemingly random usually do not remember bookmarks, particularly when the pc does not stop correctly. Thank you

  If Firefox detects that the places.sqlite database is corrupted then Firefox can create a new database file and import bookmarks from a JSON backup that does not contain the most recent bookmarks (a new JSON backup is created when you run Firefox for the first time on a day), then you may lose the bookmarks in such a case.

  You can check for problems with the database places.sqlite file in the Firefox profile folder.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file

• Satellite A500D - fan does not stop

  Hello

  Two days ago I updated the Bios to version 1.20 win, and since then, the fan is constantly at 72% and the temperature of the CPU at 36 º.

  At Toshiba, I say it is normal, but the fan does not stop at any time and the noise is annoying.

  Anteriormento updated the BIOS, the fan stopped and started and never surpassed 54%.

  Looks like a vergueza by the care service, they have given me, I tried to deceive, as is normal for a portable fan that keeps 72%.

  Please I need someone to tell me where I can download before my Bios and how to install it.

  PS: My processor ens Turion Rm-77.

  A welcome message

  Hello

  You mean the cooling module fan didn't run all the time with the previous BIOS version?

  Well, in this case you must downgrade BIOS to the previous version.
  The problem is that you can download the latest version of the BIOS from the Toshiba page.

  But maybe a Toshiba ASP might help you and may downgrade the BIOS to the previous version

  But have you tried to change the settings in Win 7 power option?
  You can find it in the control panel-> power options

  There you can change modes of single power supply.
  In the power settings advanced, you'll find settings Toshiba energy saver and there you can change the method of cooling while the laptop is running on battery or power.

• Tecra M3-264: the fan does not stop

  Hello

  I have a labtop Toshiba Tecra M3 264, it's wonderful BUT,.
  The fan does not stop and this sound is a bit noisy in comparison with the other all I have.

  Is this normal in this model or should I take it to the service?

  Hello

  It is normal activity on new laptops cooling fan is very noticeable on older models. I recommend you to check what happen if you change the settings of cooling method in power management.

  By the way: allow the unit to take a breath. Make sure that the ventilation openings are free and that there is nothing that can stop the flow of air. If the vents are dirty and full of dust, it can also be responsible for cooling fans runs often and with a higher speed.

  Good bye

• E540: Fan does not stop

  Hello Board and support team!

  The fan in my e540 does not stop once it began to turn. It is completely independent of the system temperature. Even if the room temperature and the cpu is less than 40 * C the fan will not stop.

  The fan does not always turn, however. If I wake up the system from sleep mode or turn it on, the fan does not turn and will not start spinning until a certain threshold temperature is reached. This part of the fan control works correctly.

  Interesting procedure: I work until the heating system and the fan starts. I waint until the system is cooled below 40 * C (checked with software speccy, the flow of air leaving the laptop is cold). The fan is still running at this stage and will turn probably forever. I suspend the laptop (no full stop not required). I immediatally 'wake up' the laptop (temperature of the system has not changed, no time to cool). The fan is off again and will not start turning until the temperature threshold is reached.

  What can I do to fix this? I don't always want to suspend my laptop to turn off the fan. She has to stop on its own.

  
  

• S440/Win10 - does not stop correctly

  Hello

  I have upgraded to windows 10 recently. After the upgrade, sometimes, the laptop does not stopped correctly - windows stops, the screen goes black, but thinkpad red LED remains flashing and I hear the fans still doesn't work. To really stop I have to press and hold the power button. The battery also is to be served, because after that I left it like that night, it was gone.

  Now, it's a little weird because it isn't always happens. It only seems to happen after that the laptop has been for a while. If I had to bet, it would be related to switchable graphics as the behavior resembles the problem with graphics terribly switchable and sleep on win8.1.

  To work around this problem, I took to restart the computer and stop just after shot, but Needless to say it is suboptimal.

  Anyone has any ideas on how to fix it?

  I think I found a solution. I have seen this mentioned in other forums of laptop, and it seems to have fixed for me.

  The culprit seems to be this driver:

  Intel(r) Management Engine Interface Driver for Windows 10 (version 11)

  If you install the earlier (version 9, should be on the lenovo driver page) it solves problems of stop/standby.

• "For more specific class" does not not on sbRIO 9636

  The application that I am forcing me to programmatically access arbitrary components of a nested group. Currently, I am doing the browsing the cluster using his property [] node recursively controls. Currently, my accessor VI to accomplish this works very well on a normal PC but does not work on my target in real time, a sbRIO 9636.

  After some research, I determined that the function "To more specific class" does not work on my target in real time. I have attached a code base that shows the heart of the problem. It works fine on a PC but will return an error 53 when running on my target in real time.

  

  A few questions:

  (1) is 'To more specific class' supported on the sbRIO 9636 or not?
  (2) if it is supported, what am I doing wrong?

  (3) if it is not taken in charge, what are other methods for access by the arbitrary elements of a nested cluster program?
  (4) if it is not supported, why LabVIEW allows me to place the feature even when the sbRIO 9636 is explicitly selected as my goal in my LabVIEW project? It seems prudent to restrict its use, if it is not supported. My day job has been effectively wasted because of this problem.

  For reference, here's a few previous discussions

  http://forums.NI.com/T5/real-time-measurement-and/modifing-cluster-component-properties-on-sbRIO-No-...

  http://forums.NI.com/T5/real-time-measurement-and/quot-Manager-call-not-supported-quot-when-typecast...

  Thank you
  JAnthony

  The other posts are correct, because it is currently not possible to use the function on a real-time target. This is a known issue and is being investigated for correction, but currently there is no work around. It is available on the pallets that this behavior is not intentional and should work.

  You have described your application requires that recursively through a table and access to specific data. Does this mean that the Data Structure might be different when the vi is run and you need to adapt to a changing data type? If this isn't the case, then all you need to do is to get the value of the reference and then ungroup the cluster as needed then store the changed values to the same reference.

  If you're going to have to settle you will encounter difficulties to be determined pragmatically you should do but I have a suggestion. Create a cluster with an enum and a Variant. You can use the enumeration to set the type of the variant in question. He chooses the type to convert the variant according to the code. It is a similar structure, like messages in queue manager and his messages that happening except that you will be passing a reference to this group that has both the message and the payload in one. The reference could be used to get the value and then the code must only be written to accept the Cluster of Enum and variant you can then convert the variant to the appropriate type for later use. For best performance, you also use in Place of the Structure element.

  It's only a means potentially accomplish what you want. If you describe your program and needs more in depth, we are able to offer a more suitable solution for your application that does what you need. I wish you a nice day!

• While the loop does not stop when the two values are equal using equal to comparitor

  Hello world

  I have a really, really strange bug. I have a LabVIEW VI that change a chain on a power supply. I have a start and a stop voltage and use a while loop to increment the device. For example if I want to scan from 1, 2V to 2.2 V in 0.2 V incremements, the program will end when "The current tension" = "stop the tension." And it works very well!

  However, when I start - 3 V and want to stop to say-0.8 (new in 0.2 V incremements) the program does not stop when "The current tension" = "stop the tension." I checked with the probe close to what should be the end of the race and - 0.8 V goes both of the entries ' equal to ' comaprison operator, but that his can't trigger a real result.

  It's very strange for me. Espeically as if I'm going - 0.8 V to-2 V but decrement of-0.2 V, the program stops correctly!

  I am very confused!

  See you soon!

  Search on: comparison of floating-point numbers

  The second thread is particularly relevant. This discussion was 2009, but you can find that the same "bug" being reported to enter the end of the 1980s.

  Mike...

• Called vi with one hand, it does not stop

  Hi all

  I try to call a vi of a principal, I have succedded to call the vi but I couldn't stop the main vi and the called vi does not stop and disappear. Where I did wrong?

  LabVIEW follows a model of data flow for execution of vis a block diagram node runs when it receives all the required inputs. When a node is running, it produces output data and transmits data to the next node in the path of the data stream. The flow of data on the nodes determines the order of execution of the VIs and functions on the block diagram. Source

  Once you have called your Subvi, your main VI is pending so that it ends before it can move to the next State in the state machine which is the reason why it will not stop.  If you want to run a separate VI, you can call an asynchronous mode

• HELP - read file that VI does not stop at the end of the WAV file

  Hello

  I am a beginner and I'm working on a project that opens a .wav file and it plays (with volume control). I found all the associated examples sounds extremely useful and I can just edit the audio file to output.vi his example to my project.

  I'm running into a problem where the vi does not stop at the end of the wav file, and it seems for a while loop. the wav file I am using ended a long min (and it has been converted to a data file in a wav file, if it matters). I have attached my vi modified here and appreciate any help.

  Thank you!

  Christy

  The OP and the æ OR

  Please go to help on the toolbar. Then select examples and search for sound. Locate the sound file "for his Output.vi.

• Simulation does not stop in the Loop Simulation & control

  I'm working on a settlement in a loop of control & Simulation. I created a State space model and an inside observer.

  Now, I've implemented nearlly all, but now the simulation does not stop.

  First here is a picture of the .vi when it still works:

  

  But this isn't the end result, I want to have.

  I want to connect the output of the subtrahation (2 x - y) at the entrance to the exterior product.

  You can see from the image below:

  

  If I do, my continious simulation and never stops. The simulation time is always set to 10 sec.

  The .vi is attached. I hope someone can help me.

  I don't understand your suggestion. I've set up a node of your comments, but this does not solve the problem.

  But I found another solution to the problem. I build the .vi completely new and used the arithmetic of the design group Signal and control Simulation. The gain block and the summation block works better in my case that digital add and multiply the blocks. Now, the tracks of the simulation and the regulation works well.

• Why the STOP button does not stop this vi?

  Hello

  I took an example of Labview 2011 called "soul hollow period-Low Freq 1 Ctr.vi. This example vi measures one period, but, I want to measure the period over and over again, so I put it in a WHILE loop, but the STOP button does not stop at the vi.  Instead, I have to use ABORT to stop the vi...

  How can I stop this vi?

  Dave

  It does not replace the time-out.  The while loop is a separate beast from the meter reading.  You wouldn't want your loop due to always make you miss the error messages, would you?

  Usually just clear the error message of time-out on the counters.

  You get the message twice because the loop runs in fact twice.  The first time the stop button is read as false as soon as the loop begins.  Then you click on it.  At the same time that it takes 10 seconds for the timeout counter to occur - when he does it gives you the error.  Then, the loop runs again.  This time it reads the key stop as true, because you clicked on it during the timeout of 10 seconds of the last loop.

  A time loop allows everything inside to complete execution before the end, then you will have to wait for an another timeout of 10 seconds to occur which produces another error.

  Unless you need a measure of very, very low frequencies I set your time-out to a more reasonable number and simply erase the mistake if it matches 200474.

• kb2596615 causes ade to failure, error was 459: object or class does not support the set of events

  A couple of my users started getting our application error messages ade grown after you apply this update. Everything is well after its withdrawal. First mistake was 459: object or class does not support the set of events. Basically, no event has worked. Why is this update break my application? It should be removed from the queue of the update.

  Okay, I've worked on it with Microsoft, and the actual cause turns out to be:

  MS12-060 security update affects the functionality of Access database
  http://support.Microsoft.com/kb/2748410

  This article updated fingers MS12-060, specifically KB 2687441, as the culprit.

  It turned out that ActiveX controls on the form (specifically the Microsoft Common Controls 6.0 Toolbar), caused the failure.

  The solution was simple: on a patched machine, open each form with an ActiveX control in design mode, compile and save it. It worked for me. Ignore the details of the solution that I wrote in the previous post!

  You may need to resave MSCOMCTL. OCX, as suggested in the article, to get your databases to work.

  -Ken

• win xp sp2 does not stop

  I have a laptop running win xp sp2 - for 6 years never had a problem - have avg 2012 and recently did avg can - but the computer does not stop and I didn't hold down the Start button - what is sp2 that is the problem? -If so, how do I get/install sp3? I'm not a whiz hardward.

  Did you go to the Microsoft Update site? SP3 should be available and should have offered for a long time if you are automatic updates.

  http://www.update.Microsoft.com/microsoftupdate/v6/default.aspx?ln=en-us