Tecra M3-264: the fan does not stop

Similar Questions

• Satellite A500D - fan does not stop

  Hello

  Two days ago I updated the Bios to version 1.20 win, and since then, the fan is constantly at 72% and the temperature of the CPU at 36 º.

  At Toshiba, I say it is normal, but the fan does not stop at any time and the noise is annoying.

  Anteriormento updated the BIOS, the fan stopped and started and never surpassed 54%.

  Looks like a vergueza by the care service, they have given me, I tried to deceive, as is normal for a portable fan that keeps 72%.

  Please I need someone to tell me where I can download before my Bios and how to install it.

  PS: My processor ens Turion Rm-77.

  A welcome message

  Hello

  You mean the cooling module fan didn't run all the time with the previous BIOS version?

  Well, in this case you must downgrade BIOS to the previous version.
  The problem is that you can download the latest version of the BIOS from the Toshiba page.

  But maybe a Toshiba ASP might help you and may downgrade the BIOS to the previous version

  But have you tried to change the settings in Win 7 power option?
  You can find it in the control panel-> power options

  There you can change modes of single power supply.
  In the power settings advanced, you'll find settings Toshiba energy saver and there you can change the method of cooling while the laptop is running on battery or power.

• Problems with Satellite A300-1 b 0 cooling: fan does not stop

  Hello users,.

  I m new on Linux and Ubuntu, I installed ubuntu 8.10 last week;
  All things are ok, ok start menu because I have XP, network ethernet connection and wireless, updates ok, ok packages!
  just one thing that make me "' it's my laptop fan, I explain:
  He turned on since I have connection ubuntu and it will be off only when that I disconnect "shutt down" my laptop, so it never stops until the

  the use of ubuntu, because with xp there start but if the processor is cold it is stop! and restart and etc...

  So if anyone has an idea, you are WELCOME!

  My laptop configuration:

  Satellite TOSHIBA A300-1 b 0
  Processor: core 2 duo T8100 2 .1GHz of
  RAM: 3 GB
  SATA hard drive
  Marvell Yukon 88E8040T Ethernet
  Intel wireless

  and I have the patched with the latest bios of the toshiba site
  Date of the bios 07 2008 v3.7 blistering

  > The use of Ubuntu, because with XP there start but if the processor is cold it is stop! and restart and etc...
  If I understand correctly using the Win XP the fan does not always with some breaks. Is this good?

  This isn't a problem but a friend feature.
  As you know the GPU creates a lot of heat.

  This is why it is important that the fan is way on and to cool the GPU or CPU if the temperature reached and some point.
  I put t know what temperature must be reached, but it cannot be too high due to overheating problems.

  Second graphics driver Toshiba control the performance of GPU and the dissipation of the heat too. If the temperature rises to a critical level (applications executing heavy performance) the diver decreases performance to ensure that the heat dissipation would come down.

  But this happens only if the cooling module will not be able to cool the internal temperature.

• Satellite P850-30W - the fan does not work after returning from the mode "Eve"

  I have a Toshiba Satellite P850 30W with bios 1.90.

  Sometimes the fan does not work at all after back mode standby on windows 7.
  What happened twice (perhaps several times without knowing me), and Ive had the computers for a month.

  Normally the fan starts to run when the CPU gets more than 50 degrees celsius and stops less than 50 celisus...

  I tried running Prime95 when this fan-this occurs and the time of the computer got dangerously high (near 100 degrees)! the fan did not start at all
  .. .This error could damage the laptop potentinally...
  to get the fan turns once again I have to restart windows

  anyone experienced this?
  I guess that the fix would be to never use standby... or toshiba needs to fix it with an update of the bios.

  > Sometimes the fan does not work at all after back mode standby on windows 7.
  > What has happened twice (perhaps several times without knowing me), and Ive had the computers for a month.

  You said it's happened twice and only sometimes done this means that above all the fans are working well?
  In this case, this would mean that it of difficult to reproduce this problem, but you might be right: maybe a BIOS update would help solve this problem permanently

  I found some discussions on the stand-by mode and fan activity and in most cases, the update of the BIOS was the key.

• E540: Fan does not stop

  Hello Board and support team!

  The fan in my e540 does not stop once it began to turn. It is completely independent of the system temperature. Even if the room temperature and the cpu is less than 40 * C the fan will not stop.

  The fan does not always turn, however. If I wake up the system from sleep mode or turn it on, the fan does not turn and will not start spinning until a certain threshold temperature is reached. This part of the fan control works correctly.

  Interesting procedure: I work until the heating system and the fan starts. I waint until the system is cooled below 40 * C (checked with software speccy, the flow of air leaving the laptop is cold). The fan is still running at this stage and will turn probably forever. I suspend the laptop (no full stop not required). I immediatally 'wake up' the laptop (temperature of the system has not changed, no time to cool). The fan is off again and will not start turning until the temperature threshold is reached.

  What can I do to fix this? I don't always want to suspend my laptop to turn off the fan. She has to stop on its own.

  
  

• After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) restart you device.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

  Council: https://discussions.apple.com/docs/DOC-9892

• Firefox seems to have recently developed seemingly random usually do not remember bookmarks, particularly when the pc does not stop correctly. Thank you

  Firefox seems to have recently developed seemingly random usually do not remember bookmarks, particularly when the pc does not stop correctly. Thank you

  If Firefox detects that the places.sqlite database is corrupted then Firefox can create a new database file and import bookmarks from a JSON backup that does not contain the most recent bookmarks (a new JSON backup is created when you run Firefox for the first time on a day), then you may lose the bookmarks in such a case.

  You can check for problems with the database places.sqlite file in the Firefox profile folder.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file

• Satellite Pro 4200 overheating because the fan does not work

  I have a satellite Pro 4200 and it keeps overheating because the fan does not work I went in and everything seems ok but then I power it upward but the fan does not work someone can help? all cables are connected the fan run at all.

  Hello

  And how to help her in this situation? If you are sure that it cooling fan doesn t work 100% needs to be replaced.
  By the way: did you clean the unit and remove the dust?

• While the loop does not stop when the two values are equal using equal to comparitor

  Hello world

  I have a really, really strange bug. I have a LabVIEW VI that change a chain on a power supply. I have a start and a stop voltage and use a while loop to increment the device. For example if I want to scan from 1, 2V to 2.2 V in 0.2 V incremements, the program will end when "The current tension" = "stop the tension." And it works very well!

  However, when I start - 3 V and want to stop to say-0.8 (new in 0.2 V incremements) the program does not stop when "The current tension" = "stop the tension." I checked with the probe close to what should be the end of the race and - 0.8 V goes both of the entries ' equal to ' comaprison operator, but that his can't trigger a real result.

  It's very strange for me. Espeically as if I'm going - 0.8 V to-2 V but decrement of-0.2 V, the program stops correctly!

  I am very confused!

  See you soon!

  Search on: comparison of floating-point numbers

  The second thread is particularly relevant. This discussion was 2009, but you can find that the same "bug" being reported to enter the end of the 1980s.

  Mike...

• code 511 undetected fan and the fan does not turn or unraced where do replacement or is this question solfware

  code 511 undetected fan and the fan does not turn or did not run where do replacement or this question solfware please help

  [Moved from the community centre of Participation]

  Fan errors are usually hardware problems. There is a fan in the case including detector does not detect that it is available or spinning. This could be a problem with the real fan or the fan sensor.

  Does this have to do with? Are you talking about an error that is displayed by a Windows machine? If so, what version of Windows? When the error take? At boot time? Before or after that Windows allows you to open a session? When you provide no details, it is almost impossible for anyone to help.

• ERROR MESSAGE "THE FAN DOES NOT.

  As my system there is this message on the screen-

  "The system has detected that a cooling fan does not work correctly.

  -(90B) SYSTEM FAN

  Continued operation is not recommended and can result in unpredictable behavior that may cause stop randomly, loss of data or damage the system as possible. The system will stop in 15 seconds. To avoid closing and continue the operation, press enter now. »

   

  it's hp pavilion g6 2016tx m Odel

  product not... B3H81PA #ACJ...

  I JUST UPDATED MY BIOS, BUT IT DIDN'T WORK... WHAT CAN I DO?

  Please, try the steps in the following link:

  HP laptops - system of fan (90 b) error message at startup

  This error indicates a problem with cooling fan and urgent attention is required.

• HP Envy 15 "touch screen power LED appears, but the fans does not and the screen does not light

  Hello!

  I'm a student in computer engineering at the University of Waterloo 1A, and I run a very serious problem with my HP Envy 15 "TouchSmart laptop computer running Windows 8.1. It is a problem that just started today, and I'd rather have a first support here before going to see the technical support Office sometimes tomorrow. It has to do with the screen and the fans where the Power LED lights in white, just as when the laptop works properly.

  (I have warranty on the laptop when it was purchased last June, except that if I find that I need to get a replacement, I'll lose all my work, I did on that since I started my semester.) It's so silly of me not to have all my work saved on a backup, because I have an external hard drive. Problem is, I've had too many problems in getting myself organized, I'm not being open-minded as I should, and worse, I'm not a balance between life and work at home.)

  Before I had my MATH 117 conference (Calculus 1 Engineering), I was in a nearby lab where my laptop was open and turned, works correctly. I've had NetBeans IDE running since I wanted to work on the second part of my current assignment of CS 137 (principles of programming). Because it was almost time for my presentation, I closed the laptop by simply moving the screen down on the keyboard, where it goes into mode 'sleep'. (Whenever I flip to the top of the screen, the laptop is supposed to return, and the sliding screen of Windows 8.1 connection will appear.)

  When I took my seat for reading, I wanted to spend a little time to work on my programming assignment. However, after the reversal of the screen to the top, instead of having the login screen appears, I encountered the problem: the power supply light is showing a white light, but I don't hear the fans between the ventilation openings on the left side of the laptop and the screen does not light. I tried to take the power for several seconds and once button at least 10 seconds, except that the power light continues to display on a white light. The Commission of the Wi - Fi light is not displayed.

  Whatever it is, I don't want to take out the battery because I have that on my last laptop, and it's from there that I couldn't turn to the former, a new market. If I leave the Envy laptop battery, it will short-circuit the connections between the battery and the computer, and so several components will FRY. For now, what I do let the laptop is to empty the load on the battery. Then, once I noticed that the power light does not project a white light, or plug in the AC adapter and try turning the laptop on the power button.

  It will take a little while for the circuit drain the load on my battery but...

  Anyway, please would you be kind enough to help me with this problem? I would really appreciate if you can give me several recommendations. Thank you!

  Hello @GregPDesWHP,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post on how your laptop is not on, and I'd be happy to help you in this case!

  In order to restore the features of your computer once more, I recommend you follow the steps described in this document on the computer does not (Windows 8). If the problem persists after having exhausted all the steps in this document, I recommend you contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps!

  Concerning

• Satellite M30-604 freezes and the fan does not work after replacing

  Satellite SM30-604. Laptop has left the mat from one day to the next and overheated! Fan won't spin and laptop start only occasionally. Thinking that the fan was fault I replaced the fan but even this new fan doesn't spin. The heat sink is totally clean - dust free inside the fins at all. The laptop is only 2 years.

  Cooling using forced (by sticking a nozzle of aspiration to the output of the cooling fan!) the laptop starts sometimes as normal until the desktop screen with all of the usual icons and no error message. But then, it does not further - the freezing of the screen, keyboard and mouse.

  Most of the time it does not start at all. When it does not start, the blue LED lights up but there is no hard disk activity or LCD at all - even the wifi LED lights even.

  Really grateful if someone knows what's going on. You are not sure if it is the main processor that is defective?

  Thanks in advance.

  Charlie

  Hello, Charlie

  As you know on this path is not easy to give an accurate diagnosis, but according to your assignment, I guess there is a complex problem and unit must be properly verified. I also think that there must be a problem with the electronics.

  It is really possible that the motherboard needs to be replaced but, as I already said, it is not possible to say something specific about your problem. Try contacting Asp and you will see what they say.

  Good bye

• Satellite A30 - 404 - the fan does not work

  I have a Satellite A30-404 for a couple of years now, and recently I saw serious problems with my laptop.

  Let me start from the beginning:

  My laptop has been a few months, when he suddenly stopped, I contacted the helpline and they picked up the phone and fixed.
  Again, a few months later, it happens again and I call them, they tell me that the problem is caused by the dust accumulating on the radiator of the laptop.
  I used a vacuum among fans to clean dust.

  When I do that, indeed, there was a lot of dust coming out, so I made this process, I realized a few months and the laptop remained very well.

  A few months ago, when vacunuming the pc again once I heard something breaking and I soon realized that all the components of one of the fan where gone.

  Probably one of them broke and since it had to be rotated at high speed he stopped and beat all the others. So I had 2 broken fans 1. I realized that in the long term that my processer could be destroyed because it did not good cooling. Since then the processer would become very hot and consumes much more energy than normal.

  Now, I also have the problem that whenever I turn on the pc it starts slowly draining battery (its plugged into the power supply). It's like I have a giant battery, the laptop power and eventually it will turn off. I also tried to boot the pc with no battery at all and it works very well for a while, but then it turned off suddenly. I try to turn on the pc and after 1 or 2 seconds it stops again. I don't know if its related to the fact that the processor is damaged boats.

  I talked to a lot of people in order to get the fixed fan but they say it can become very expensive since its hard getting the same fan. And by the way, when I work on the computer with only the battery that it depends on almost an hour

  Any suggestions? Help, please

  EDIT: I turned of the auto in hibernation when the battery is low to see what is happening, the energy of the battery indicates 0%, but the laptop stays on.

  Hello

  Well, you should be cautious if you use the vacuum cleaner to clean the fans. It is risky!
  Extra ball bearings might damage if the fans turn too fast.

  So if you have no experience with these procedures you should t do.
  The person with the experience as a technician workbook must clean the fans and cooling modules.

  I agree with Doomlord, and it seems that you need a new cooling module.

• Fan does not stop on Satellite P100-194

  How can I stop the fan? It works very, independent of all the parameters of CPU speed or powermizer settings. Is not very strong but quite hard to hear.

  Is there an improvement in the update of the BIOS of the 27.7.2006 or what else can I do to stop the fan?
  I tried with NHC as I did with my other laptop, here it worked perfectly.

  Hello

  First of all, it would be nice to know your name detailed for laptop.
  Also if fans run every time so I guess that it of necessary to cool the CPU.
  You wrote something about powermizer settings.
  On Toshiba laptops, you should find the Toshiba Power saver. There you can change the settings for each power mode.
  Also if she won't help so I would recommend comparing the visions of the BIOS of your laptop and on the page of Toshiba.
  If there is a newer version, so you should try to update the BIOS.
  Be careful! Make sure you use the good BIOS and the proper procedure!

  If after updating the BIOS the fans won't be won't stop or will work continuously if you could check in the grids of cooling modules. Eventually, the dust and debris inside the laptop is responsible for this issue.
  In this case, you can try to use carefully vacuuming to clean the fans.

  In addition the square around the laptop must be free due to the circulation of air.