Oops, I did it again...

Similar Questions

• I did an upgrade and now can't get past login screen

  I did an update of my Macbook Pro, non-unibody, running 10.8. ? by using the software update page.  It seemed it wasn't minor corrections to the drivers, but the Mavericks jump or what.

  Everything seems to work well and he did it again to the login screen.  Now it makes a loop on the login screen.  When I enter my login, it seems, it tries to connect but just returns to the login screen and my avatar.  If I enter an incorrect password, it is as it should be and shakes the password box, but when I enter the correct pass it's all gray, then black, then loops back to the login screen and my avatar.

  Help please?

  Bruce

  It would be useful that you have indicated the EXACT model/year of yoyr MBP.

  Reset the SMC and the NVRAM:

  https://support.Apple.com/en-us/HT201295

  https://support.Apple.com/en-us/HT204063

  Try a safe boot:

  https://support.Apple.com/en-us/HT201262

  Any change?

  Ciao.

• Installation says 'successful', however, same updates needs to install over and over again. (KB2518864, KB2633880 & KB2572073)

  Hi all

  original title: install said 'successful', however, same updates needs to install over and over again.
   
  Hope everyone is doing well.  This just happened this morning and try to find solutions but seems I can't find the right one.
  So I got the "shield of Microsoft", letting me know that I have some new updates available.
  1. Update for .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XP x 86 (KB2518864)
  2. Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2633880)
  3 security update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2572073)
  I installed the following updates and he "succeeded".  A few minutes later, the shield pops up again asking me to install the SAME updates.  I did it again and once more "managed".  A few minutes later, the shield popped up again (same updates).  This time, I installed it, my computer re-setting, however, the same updates need to be installed again.  I'm ignoring the shield right now.
  Thoughts on that?  This means - it is NOT installed correctly?  How can I fix it?
  I have a netbook, Windows XP laptop.
  Thank you.

  Hello

  It seems to be a mess of some sort on the server. Until that which is high to the square correctly, follow these steps.

  We will empty the download folder.

  Start > typeRegeditdans cmd & press enter

  type in
  net stop wuauserv

  OUTPUT

  NB. which temporarily stops the automatic windows update service. Your next restart of Windows, it will be again.

  Go to Windows Explorer.
  Look on your system (usually C) drive and see the name of the Windows folder. Like Windows or WINNT.
  Edit following as appropriate.
  If your Windows folder is C:\Windows. Look at this file
  C:\Windows\SoftwareDistribution\download

  If you find files in there, remove them. This file is where the Windows Update files are stored downloads.

• DirectX on Windows 8 (64-bit) "your DirectX Runtime is up-to-date. Download and install this file from Microsoft. ""Setup could not download the file. Please try again later or check the connection to the network. »

  So I tried to get this to work at least for a day now, but whenever I try to launch my new game I'm away I kept getting this error: "your DirectX Runtime is up-to-date. Download and install this file from Microsoft. ' When I was re-directed I downloaded, it opens and clicks on agreed and all this things, but after 10 seconds initialization, it gave me this error: "Setup could not download the file. Please try again later or check the connection to the network. " I checked all that nothing seemed to be wrong, I did it again and again and again. So I just went to a solution or any news for DirectX. So far, no luck.

  I am running on DirectX 11 right now, is if there is a new DirectX or am I a jerk, and that is a different problem? I can't understand it.

  Thank you

  Hello

  Try this link... it's a complete Installer for DirectX Runtime June 2010... This is an optional package that use a lot of games...

  http://www.Microsoft.com/en-us/download/confirmation.aspx?ID=8109

  The file is self-extracting, so take note where extract you it to.

  Open the folder, and then double-click DXSETUP...

• videos YouTube will not autoplay, AGAIN!

  YouTube videos are a saga continue wth Muse, every now and then that adobe cuts the AutoPlay on youtube videos feature. They did it again. I have more than 500 videos on Muse im development sites and they are blocked as cars without gas. Please please tell me that this is only temporary? Vimeo videos are not affected.

  AutoPlay of YouTube videos were not earlier today. It wasn't a problem of Muse - it was a general problem of youtube.

  YouTube seems to have fixed a video autoplay are still working today.

• New tab behavior

  I inadvertanly did something to 12.0 Firefox. When I started Firefox tab '+' to add a new tab had moved from the right side of the tab bar to the left. I moved all of the other tabs to the left, but now the new tabs are created on the right side of the tab '+' and not the left.

  I have no special additions for the tab and don't want everything - I want just the default behavior to return once again.

  Thanks for any help

  Oops! restarted Firefox again and normal behavior is back. My apologies if I've lost all the time. Am confused but happy.

• WIN8 cannot select the user when connecting more

  I used to have the option to select the user to connect as but now I have a screen that says:

  Press Ctrl + Alt + Delete or use the Windows Security button to unlock

  When I hit Ctrl + Alt + Delete I get only the most recent user login.  If I hit the left arrow right top left of the image, I must return to the Ctrl + Alt + Delete screen.  There is no way I can see to select another user.

  If the current user remembers actually disconnect from the screen Ctrl + Alt + Delete I am taken to a login with a choice of the users screen.

  This used to work and I don't know if my 5 yo changed something or if a updated Windows did something.  But my wife and son both need to use this notebook so I really need separate accounts.

  I found a few long really complex stuff on the ' net on the definition of the strategy group and fiddle with the registry but I know my 5 yo did nothing like that.

  How do I change back?

  Dennis

  PS what is the "Windows Security button" anyway?

  I realized that I had recently installed Cisco AnyConnect VPN software to connect to the work.  Which of - installed and now life is still happy.  I will contact Cisco.

  Sorry for the short reply above.  Validation has been broken here earlier today and several machines at the same time making a response and a new post, I didn't type a bunch just to get the "Oops, something went wrong" again.

  Dennis

• Dreamweaver CC extensions

  The CC extensions Manager shows that my extensions are installed.  But Dreamweaver CC 2014 does not show them.  Help, please.

  Oops, I just looked again at the screen and realized that the extensions did not demonstrate in DW CC2014.  It's working now.  Thanks for your help.

• Time Machine blocked preparation backup

  Hi community

  Time Machine, I get the iMac to backup, Time Capsule 371 GB of the preparation phase of backup available 998 GB for one eternity, as others have reported.

  My system is an iMac (27-inch, late 2009), processor 2.8 GHz Intel Core i7, 12 GB 1067 MHz DDR3 Memory with an ATI Radeon HD 4850 512 MB video card and a physical disk internal 1 TB ST31000528AS Sata media.

  My last backup was September 16, 2016 @ 1257 GMT and my software was the last version of El Capitan.  (I backup to another external HARD drive, using Carbon Copy Cloner and backup guru Mac unfortunately I don't have a big enough other ext HDD to run a time Machine backup to as well).

  When the TC is connected I can see the iMac and iMac.sparsebundle backup folder and when I enter the time Machine I can see the chronology running back from 16 Sep and it allows me to access the files in the folders.  So, I guess that the disk HARD of TC is OK.

  Software changes have been: 1 MS a copy of CCleaner Free 1.14.451, 2 Ms Security Update 2016-001, 13 Sep Adobe Flash, 14 Sep 12.5.1, 16 Sep Digital Camera RAW compatibility update iTunes.  Never had a problem before with these downloads.  Safari updated September 20, then to Sierra 22 Sep having saved first using the CCC and MBG.

  Through the various pages of help through Google.  Follow-up advice given to reset the SMC and the PRAM, deleted Sophos home and com.apple.TimeMachine.plist and com.apple.TimeMachine.plist.lockfile.

  Rebooted and restarted the iMac and Time Capsule several times, done many backups check the reset even the time Capsule disk, but all without success.

  I'm still stuck in preparation of backup when I reselect the backup drive.

  Can someone help please?

  Finally, I had a problem in 2014 when Apple recalled the iMac to a HARD drive replacement program.  This was successful, but a few days later the Time Machine and time Capsule would not save.  This is due to the component change when the UUID was different.  The advice I would have given were to know how inherit backup and controls disk associated within the Terminal. Stupidly, I started again when the TC asked me to and then discovered the Terminal commands a few days later.  The loss of backups of 4 years was no big problem, so I suppose that if I have to, I won't again unless a member of the smart community can better advise me please?

  Good community

  I forgot to tell you that I save on a Capsule of 1 GB bought in 2010 with the iMac.

  Don't know how, but not before I finished posting my above query Time Machine kicked back in action and performed a backup pick up all the changes, about 50 GB since Sept. 16.

  He did once again this morning, so I'm sorry I can't post what Time Machine and my Time Capsule due action to act properly.

  Concerning

• unexpected shutdown

  Hello everyone,

  When I turned off my mobile (battery was 20%), I did it again, he opened and took 3 seconds and turns off automatically. when I tried to start it again (it asked me to plug in charger) when I tried mobile opened and took 3 seconds and stop.

  If anyone has an opinion.

  Kind regards

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

  More info here:

  https://support.Apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• Lost my password synchronization

  I use Firefox for android and every now and then I clear Firefox completely app data because it starts to become slow for some reason any (even without addons). I just did this again an hour or two after a few months of no problems there. Since it's been a while, the password I thought I used for the synchronization did not work and this is the case with the e-mail provider that I use, so why I can't retrieve my password from there. I contacted them to see if I can recover my word of past, but incase that doesn't work, I'm asking here. I have a vague idea of what should be the password, if this is useful. The account associated with the synchro is [email protected]. Thank you.

  Hello, the encryption key derived from your password is the only way to access and decrypt your data sync (there is no other way, even for mozilla).
  If you have lost your password it will be not possible to recover these data, even on a password reset (which will wipe existing data on servers in sync).

• I used "tab" as a password

  Hey,.

  If I want the child with her toung on a post of the lamp.

  I tried setting my password to 6 tabs x. It worked, whoop whoop. But now I can't access the password on the iPad settings and change it. * sad *.

  The way I put the code was that it appeared the numbers keyboard. I clicked on the empty line where appears the password. Then the keyboard full size stood inside the small square on the screen and only the tab button and the first letters of the keyboard to adapt. Since this is the keyboard on a large scale inside the small keypad. I filled the tabbed access code and it worked. stupidity me and I did it again and agree to hit.

  Fortunately I can unlock my iPad and use it. Unfortunately I can't change this back.

  Any help in this regard? I can't do a restore because I didn't have a backup until after I did the access code. Thus, the new backup will have the same access code, right?

  iPad Pro 12.9 "iOS 9.3.2

  Gwarf says:

  Thus, the new backup will have the same access code, right?

  Yes, it will be.

• Username or password incorrect after the creation of new account, tried everything

  I deleted the old email account and did it again. Thunderbird has created the account e-mail address, but when I try to use it, I get the message 'User name' or incorrect password I can access the email on the site ok, so the login ISP account and password are correct.

  I turned off the pc and restarted, same problem.

  Help really appreciated.

  Concerning
  Drachsi

  I thank very you much for your help and your support, that solved the problem. Everything is very complicated.

  I really appreciate your help with the translation, you deserve 5 stars for support.

  Concerning
  Drachsi

• icon of the taskbar right-click menu 'task' gone

  When I right click on the taskbar icon, I used to get several options, including a section called tasks. However, for about two days, I now only get three options of Mozilla Firefox, remove this program from the taskbar and close the window. I don't know where the options to open a new tab, open a new window, etc. I did change all the parameters of topic: config and tried to reinstall firefox without success. If there is a possible fix, please help.

  Edit, I rechecked to the subject: config just now and found that browser.taskbar.lastgroupid keeps returning to the user being bold. I'm certain I have reset the first time, but I did it again for fun and at least for now I seem to have the right click menu rear complete with tasks and frequent. Thank you so much Gingerbread Man and someone else who posted suggestions. Your a lifesaver!

• Restore the iphone using recovery mode

  so I forgot my password and tried to restore my phone. I tried the first two methods, but unfortunately they did not work for me. using itunes, I was invited for a password and also I don't have another computer with me. with icloud, I accidentally deleted my camera and still was not reset or deleted after. When I tried recovery mode, he worked for a while then my update has not been done in 15 minutes, so I did it again, the problem was when I started all over, download starts from 0 kb data so I thought when it only finishes?

  to add, in itunes, I was also told that I had to stop to find my iphone.how can I do when I forgot my password?