My brand new in Officejet Pro 8600 made a loud grinding noise.

Similar Questions

• Failure to scan on a brand-new 8620 OfficeJet Pro

  Hello

  I have a brand new 8620 Officejet Pro and use OS X v10.9 & use a laptop wireless and desktop via USB.

  On both final set-up print without any problem at all but when I try to copy, scan or something by fax printers touch screen comes up with "Scanner failure - cannot copy, scan, or use the fax". As a result, if I open the HP utility it says "device status: scan unknown error".

  I've uninstalled and reinstalled all software printer 4 times - twice by using the internet and twice using set up disk & each time the same result as above.

  I used the online help guide and followed all the solutions, but all without success.

  Anyone can offer any additional help please or is their real fault with it & the printer needs to be replaced

  Thank you very much

  Welcome to the @Stratford_HP forums

  I read about how your new Officejet 8620 shows you a failure "Scanner", leaving you unable to copy, fax and scan. I'm here to offer my suggestion and comments for this question.

  Try the steps in this guide for failures to scan first, and if the problem is still apparent, I suggest to call HP to inquire about a replacement printer.

  A "Failure of the Scanner" Message appears on the all-in-one control panel and you can not scan, copy, or fax

  Details of HP:
  If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.

  Have a fantastic weekend, I hope that my post was information!

• My new HP Officejet Pro 8600 will not analyze superior at 300 dpi of the location of the single document.

  My new HP Officejet Pro 8600 will not scan more than 300 DPI when scanning individual photos on the glass plate. I do not use the document feeder. I use this printer wireless on an iMac and a PC.

  Hello

  You can pass the value of hp scan: launch of the demand application, select the shortcut to scan (PDF or JPG to the left) and change the resolution you want and save.

  This will send down the printer settings. So the next time you scan, the printer uses these settings.

  Good impression.

• My new HP Officejet Pro 8600 N911a does not allow a webscan

  My new HP Officejet Pro 8600 N911a does not allow a webscan on my laptop Dell Win7, which indicates on its Web page ¨that that the corresponding software is not installed".  I already tried in vain to install all software from the included cd, but did not find the corresponding software.  I was surprised to see that this cd does not start by itself, the single executable that I found was a setupxxx.exe and that did not include the scanning options.

  Anyone has a suggestion to solve this?

  Hello tutoke

  The Webscan must be selected in the tab of the administrator of the Embeded Web Server (EWS). See the screenshot below.

  1. Click settings
  2. Click the administrator settings
  3. Check Webscan
  4. Press on apply downstairs.

  Try to scan the image.

  

• New Premium Officejet Pro 8600 with envelopes in Tray 1 and 8.5 x 11 in tray 2 copies only to Tray 1.

  New Premium Officejet Pro 8600 with envelopes in Tray 1 and 8.5 x 11 in tray 2 copies only to Tray 1.  When I try to select the tray 2 in copy options, only Tray 1 appears as a choice.  How to choose tray 2 when it is not listed and do the copy default tray?

  I remember coming across this question:

  1. turn off the printer and remove the lower whole and not just the tray 2.

  2. turn on, turn off,

  3 replace the tray 2 and the power up.

  To enable tray 2 as default copy ferry. Go to the printer->-> select copy LCD display-> select settings-> a selected tray 2 as default.

• New HP OfficeJet Pro 8600 more - can I install and use the 2nd tray of my HP OfficeJet Pro 7700?

  I would like to install the 2nd tray of my old HP Office Jet Pro 7700 under my new of OfficeJet Pro 8600.  Can I do this?

  The 2nd of the Officejet Pro 8600 paper tray is quite different from the 2nd series printers Officejet L7700 paper tray.

  * The 2nd tray for L7700 series is compatible with: L7580, L7680, L7780, L7550, L7650, L7480, L7750, L7590 and L7555.

  Click on the link provided here to access the HP Shopping site where you can buy the tray paper 8600 2nd.  The current price is $79.99 usd.

• ... My BRAND NEW HP Officejet Pro 8630 load photo paper...

  I just bought a HP Officejet Pro 8630 and it will NOT print on paper HP Premium Plus Photo or a generic brand of paper photo.  I just unboxed and configure all web settings.  Printing on plain paper works fine; However, when I place a small load of ~ 20 sheets of paper in the UPPER tray, the printer is trying to load then present and error message "Out of Paper".  I can then immediately turn around and put a single or the stack of paper in the upper tray and the printer will print.  I tried a single sheet of photo on a stack of regular paper, remove the stack of photo paper and loosening the battery in order to ensure that they don't are not glued together, as well as turn off the printer and the cleaning of all THE rolls by instructional video of HP and it still DOES NOT... (out of paper message).

  I got exactly the same problem with an Officejet Pro 8600 this printer just replaced.  I had a similar but even more frustrating problem with HP 8500Pro; None of them will properly load the photo paper.  I do not know how to choose the type of appropriate paper via the print from the application menu and I tried to choose the types of paper "regularly."  No solution worked.  I'll take my stack of photo papers to the store chain that I bought the printer since they have the same model of 8630 display.  I will then try to print a test them to see if the same error occurs.  If it works there, I'll take this point to poor quality HP control and quickly return my printer.  If them does not load, I have to draw them on paper photo off their tray, and then try again.

  Please help...

  Update:

  I went back to the store I bought the printer from.  They had Xerox 80 lb stock in Tray 1 and it printed without problem.  I took a stack of my HP Premium Plus Photo Paper (~ 20 sheets), removed their and mine inserted into Tray 1.  It would not load the paper and gave the same error 'out of paper '.  Commercial agent has experienced the same problem.  She then withdrew the paper except just a sheet of my Photo paper; It is then printed.  It prints all the way up to 4 sheets inserted at the same time in the status bar.  Any more of 3 sheets caused the printer to fail to load the paper.  It sounds like a fault with HP loading mechanism.  I noticed that the Xerox 80 lb pound felt slightly thinner my photo paper I have so bought Advanced Photo Paper from HP (66lb) as opposed to the Premium Plus.   I took a pile of about 15 leaves for the printer and loaded.  It seems to load well and has not failed with an error.

  HP... you've had several lines of OfficeJet Pro to do things and it seems you are always dropping the ball with a defective printer product.  Where is your quality control?

• How to install my new of OfficeJet Pro 8600 on my IMAC desktop computer?

  I get this error message:

  This installer is not compatible with the version of the operating system on your computer.

  Hello

  Don't know what Mac OS you use, but you can download drivers Mac OS for the settlement of 8600 to

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=4323652&LC=en&cc=us&DLC=en&lang=en&cc=us

  Choose Mac OS X and download appropriate drivers.

  Thank you.

• 32 GB SDHC on OfficeJet Pro 8600 Plus memory card error

  I use a brand new HP OfficeJet Pro 8600 Plus.  When I insert a good 32 GB SDHC UHS - 1 card (SanDisk Extreme UHS-1) the led next to the card slot flashes for awhile, and then "Memory card error" appears on the screen.  The card works fine in the camera and my MacBook Pro's built-in card reader.

  Please notify / thank you!

  Well, I hope that he really isn't a 12MP resolution restriction as my camera is 16.1 MP...

  Anyway, I downloaded all the images on the SD card on my MacBook Pro (there is no problem reading them) and then re-formatted the card.  After doing this, the card seems to read OK based on some images of the trial.  I guess we'll know for sure once that I load the card again and try to read it, but for now we'll call this one resolved.

• Gridlines do not print in excel using officejet pro 8600

  I use a macbook pro running 10.6.8 with a brand new HP officejet Pro 8600 printer all-in-one. When I try to print a spreadsheet, the lines around each cell will not print.

  Hello

  In Excel 2007, gridlines appear not on a workbook or a worksheet print by default.

  Steps below explains how you can display gridlines in your printed worksheets.

  Select the worksheet or worksheets that you want to print.

  On the tab layout, in the sheet Options group, select the check box print gridlines.

  NOTE: If the check boxes in the sheet Options group are grayed out, it may be because you have a graphic, image or other object selected on the worksheet. If you cancel this selection, you will be able to use the checkboxes.

  and then click on print.

  * Say thank you by clicking on the "Bravo!" Star"located on the left *.

  * Make it easier for others to find solutions, marking my answer to "Accept as Solution" if it solves your issue.*

• Unique to an Officejet Pro 8600 envelopes printing

  I have just my new HP Officejet Pro 8600 installation. It is true that I can print stacks of envelopes as a media type but can not simply slide an envelope in the feeder and print a single envelope?

  I have been an active desktop and perform tasks of office such as the digitization of documents entrants, fax, correspondence, etc. All individual tasks without hassle. How can I print one envelope of my program of postage to send a letter? Huh, without the hassle of removing the media already in the charger to a standard daily print?

  If it helps, I use VISTA Home

  > No need to a charger of sheets 80 $2500

  I think it's a typo in and 8lives probably means a tray extra paper"250 sheets!

  But you raised the same exact question that made me delay the upgrade for my printer for many months, because I couldn't find a printer (in this class '8600' printers) that would allow me to feed in just an occasional envelope, without needing to remove and "Re-assign" the times set paper tray!  Absolutely maddening!

  (The Epson nearly equivalent workforce printers apparently take one-off envelopes through their rear trays, but these trays back need additional "behind the printer" access my office - the installation program could not allow - and I did not have an HP printer in any case !)

  Then (because I could afford the high additional printer as well as the extra cost!) I gave up and bought one of these '250 sheets' extra paper trays, costing around 50UK books, and who is now dedicated to my DL envelopes, which I could print perhaps two or three per month!  An absolutely crazy design flaw in my opinion exasperated!

  But I like my printer 8600 otherwise!

  Colin P.

• Google cloud print for officejet pro 8600 - could not get information at hp printer.

  I just bought a new of OfficeJet Pro 8600 today. Everything seems to work perfectly except for the Google Cloud Print connector. I can print of AirPrint, as well as e-mails to the address hpeprint.com, but when I try to record using the google site, I get the error message "could not pass information on HP printer.

  The printer is connected by ethernet wireless and it seems to work find out otherwise. I have no restrictions that can send print jobs and I changed the email address for hpeprint.com several times, as suggested in other forum threads, but it can never connect to the Cloud Print service. I'm at the level of the last firmware listed on the HP website. I tried to open the connection of several PC if several web browsers though.

  It was an important factor in the purchase of this printer. Help someone?

  OK, nothing is different tonight, but it just worked. I had just opened a chat to HP support and he gave another chance just to confirm, and I came to the page "registration successful". Prints crossed chrome without any problem. I made no changes to the printer, PC, or network. So, the best advice I can give is - it wait a few days... If all goes well, he continues to work :-)

• HP officejet pro 8600 - cannot print from my macbook pro

  We just bought a new HP officejet pro 8600 but for some reason, we cannot get my macbook pro to print on it. My mac says it is connected to it. It is listed in the printer only and all the settings look fine, but when I send a document to the printer, it will not be printed. He did print the first day we had (a week ago) but it stopped and we cannot figure out what to do. My daughter's PC will be printed, as well as the pc of my husband. It is the first time that I had problems printing to a hp from my mac. Any thoughts?

  I had my Officejet Pro 8600 about six months.  Recently, I had the same problem.  It continues to print from my Windows computers but not the Mac.   Labour goes into the impression that it is place on a wedge.  I tried many fixes, including the removal of the printer and reinstall.  Usually removing and reinstalling it will fix for a while, but now, even that does not work.  In my view, that the permanent solution is to buy another printer.

• How can I get my HP Officejet Pro 8600 more to send the scanned item directly to e-mail?

  I just moved to the top of a new HP Officejet Pro 8600 more a HP 6500 printer.  On the old 6500, it gave me the choice to send the scan to my email, however, that option is not available for me on the new scan of 8600 software.  How can I add email to my choice of where to send the scan?

  Thank you...

  Hi NICOLI12,

  Welcome to the HP Forums, I hope you enjoy your experience!

  I understand that you want to know how to scan to e-mail.

  I'll be happy to help you.

  You should be able to analyze through the scanning software HP to e-mail can also scan to e-mail from the control panel of the printer. I have provided a document to find out how Scan.

  Hope that solves your problem.

  If you are on Mac, please let me know.

  Thanks for posting on the HP Forums.
  Have a wonderful day!

• OfficeJet pro 8600 black vertical lines of print when copying

  I got a new of OfficeJet Pro 8600 a couple of weeks, and it worked fine until today, when I tried to copy something. I can always print from my pc and scan without problem, but when I try to copy a document (if I load it into the tray or put it on the scanner) the page comes out covered with black vertical lines of different sizes. It seems that this isn't the ink or the scanner since I can print from my pc and analysis very well.

  Help, please!

  This unit is plugged into a wall outlet directly? If this isn't the case, then try to connect the unit to a wall outlet directly.

  The 8600 Officejet Pro has built in the surge protector and double this feature may cause some problems.

  Also, try to reset the printer hard:
  * Unplug the unit while the printer is on
  Disconnect the other end of the power cable from the wall socket direct
  * Wait 30 seconds
  * Plug the unit to the top

  Let me know if it helps.