Opacity of gum...

Similar Questions

• Gum will not erase completely, 100% opacity

  I have PSE9. I am cropping of the images (.) Start TIF) with the tool Eraser and one day it will not erase 100% not more. I set the opacity to 100% and have tried using a few different size brushes, but it's still (it's like the opacity can't exceed 80% although his game to 100%) but when I switch to Notepad and pencil it works (total deletion). I also tried to perform a restart of the computer, trying to change other images and even tried an image that I finished before the Agency not avial a re-Edition.

  Help, please.

  Click on the small arrow on the options, top-left bar and reset the tool tool. If that doesn't solve it, suggest that you reset the preferences. Let us know how make you out.

• Wacom Tablets wireless, opacity, PS CC 2015 & you; can someone repro?

  I have a Wacom Intuos Pen & Touch Small (1st generation, model CTH-480) with the official accessories Wacom Wireless Kit (because, you know, son; don't like them). Love otherwise.

  So I'm doing my thing to hide, like I always do with my documents. I like to use the option "always use pressure from the pen of opacity" (marked in red in the picture) to this effect. I noticed that I wasn't exactly getting desired opacity based on the pen pressure, so I ran a small test trying it wireless or wired. The results:

  

  Neat, huh? Of course, I'm happy that I paid the extra to go wireless.  Oddly, the gum works very well with an opacity of pressure sensitive, wireless and wired. This has been done with the latest Wacom drivers (6.3.14 - 1) and the drivers more "late," they apparently shot (6.3.15 - 1) when they have updated their downloads page.

  IMMA will contact Wacom but before I do that, I wanted to know if someone else can replicate this on a similar (or same) configuration. Thanks advance.

  I did, I have the same model, the pressure sensitivity works but only 25% of power and only on Windows and only Photoshop. Other software works very well and on Photoshop for Mac also works perfectly.

  

• Opacity custom brushes

  Hi, when made with Photoshop CS4, I change opacity brush a lot (to get the sweetest graduations or complicate the thing), so it's a pain to continue to drag the handles on the controls of flow and opacity permanently.

  I do not know how to record a custom with a rate fixed/opacity brush, so when I select the brush he instantly changes the properties to those I want - is this possible?

  Oh it's also possible to have custom opacity gums?

  See you soon

  Adam

  With most of the tools of photoshop.

  You can save the predefined tools.

  

  MTSTUNER

• Increase the opacity of the semi-transparent pixels

  Using the tool eraser or many other methods I can put pixels in a layer be semi-transparent. Let's say I have save such a layer without history. How these 100% opaque again pixels? Y at - it a tool that does the opposite of gum?

  As long as the pixels have not been completely erased, you can try to duplicate the layer several times, and then merge duplicates for more opacity in your pixels.

• No opacity slider on cutaway since 10.1.2?

  After the upgrade to 10.1.2 miss me the opacity slider at superposition of 2 mode cutaway collars. Even on two machines - the two OSX El Capitan 10.11.4. Does anyone else have this problem?

  It's strange, that it occurs on several machines. It works fine for me. Select the top clip and click on the blue square in the toolbar displays the opacity slider to the right of the pop-up window where you choose cutaway. You could try running iMovie with the command and option keys and choose Remove preferences. See if that helps.

• Execution bug JavaScript setTimeout loop trying to fade.style.opacity += 0.1.

  Execution bug JavaScript setTimeout loop trying to fade.style.opacity += 0.1. He works with negative = operator but not with a positive operator +=. Browser (Firefox 11) just keeps telling me that the opacity is 0.1 all the time.

  Here is my code:

  function setOpacity() {
  	i++;
  	if (dir == 1)
  	{
  		fade.style.opacity -= 0.1;
  		if (fade.style.opacity < 0.1)
  		{	dir = 0;	}
  	}
  	else
  	{
  		fade.style.opacity = fade.style.opacity + 0.1;
  		if (fade.style.opacity > 0.9)
  		{	dir = 1;	}
  	}
  	document.getElementById('opacity').innerHTML = "Opacity: " + fade.style.opacity;
  	document.getElementById('dirr').innerHTML = "dir = " + dir;
  	document.getElementById('i').innerHTML = "i = " + i;
  	t = setTimeout("setOpacity()",100);
  }

  So if I change the operator += =, opacity continues to change. I am sure that the problem must be in Firefox, because with IE all kept going even with the operator +=.

  The problem seems to be that the opacity value is not considered to be a float.

  Use them instead:

  fade.style.opacity = fade.style.opacity*1 - 0.1;
  fade.style.opacity = fade.style.opacity*1 + 0.1;
  

  You can opt for document.getElementById ('bland') instead of the identifier for fade to avoid warnings in error Console.

  WARNING: The Element referenced by ID/NAME in the global scope. Use rather document.getElementById (standard) W3C.
  
  Source file: http://greenpark.fi/js_fader.php
  
  Online: 23

• CSS image opacity fades to black transition

  In December, I created an image of transition with css. During the rollover image is transparency/opacity would go to zero, while the image behind it would show through. It worked, so now (in the last 2 weeks) it turns black, appears to zero opacity, showing the image in and then made another fade from black to the image. In my research to find an answer, I came across this same problem happening on other sites as well. Opera, Chrome and IE (no just transition Exchange images) works correctly.
  http://www.thelifebalance.com
  Place the cursor on the image of the top of the flowers

  Have you tried disabling hardware acceleration to see if that is the cause?

  See also:

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• somehow, I've changed the shading of the drop down menus. How can I increase the opacity of the menus.

  I was fiddling with the settings and change the opacity of the drop down menus (like when I get a few letters in the browser address window, and a menu drop-down is displayed with suggestions). The drop down menu is now almost transparent - almost impossible to read. How can I change this back?

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

  Safe mode disables extensions in Firefox 4 and later versions, and disables hardware acceleration.
  
  Try turning off hardware acceleration.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  If disable hardware acceleration works then check if there is an update available for your graphics display driver.

• opacity of URL bar

  When you start typing in the url there is a menu drop-down indicating the locations you have visited but the opacity of it is also dark u can't read it.you see through it...

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

• Opacity setting

  Is there a way to fade the opacity of a clip/sequences imposed (flayed) so that the opacity of one side is set to 100% and the other is 0%?  Really hoping that it can be done on FCPX. Help, please.

  Put your element connected with generators > Textures > gradient. (Line up entry points and so that they correspond to the connected element.) Set one color of white, the other black. Organize the way you want to fade the clip with onscreen controls (left-right/top-down/diagonal, etc..) With the selected gradient, go to the Inspector of the video and the value of Compositing > blending Mode > stencil Luma. Select the gradient AND the connected video and make a new Clip Compound (option-G). You should get your melted clip.

• keeping the light lines inside the area reduced opacity

  I use Keynote 6.2.2 and I have some text and arrows labelling a detailed photographic image. I want to put a box on an area of the image and fill it with gray at 50% opacity, in order to create a space on which these lines and the text can be read more clearly. The problem I have is that, even if I can create the box and reduce the opacity of the fill color to 50% easily, when I put it behind the text or the arrows it seems to reduce the opacity of them, too, even if they are defined to be in the front of the box. Is there a way in which I can create a background area 50% or more on my image, but retain the text and lines appear on top of it to its maximum intensity?

  To be precise, the latest version of Keynote is 6.6.1

  Assuming you have done this correctly, the brightness levels of the text will not change in Keynote, you can check with digitalcolor in public services.   IV found using a grey environment to the most useful color less like a text background, I tend to use a matching color to the background or black.

  

• How to watch two clips at the same time on the other, with an opacity of 50% each.

  How to watch two clips at the same time on the other, with an opacity of 50% each. It is confirmed that the position of the object even two clips of mergers.

  Thank you

  PPut a clip on top of another in the timeline panel. In the video Inspector reduce the opacity of the clip on top.

• Change the opacity RangeCursor programmatically

  Hi, I'm changing the look of the chart by programming RangeCursor.

  That's what I

  rangeCursor.Visibility = System.Windows.Visibility.Visible;
  
  rangeCursor.CrosshairBrush = Brushes.Red;
  
  rangeCursor.FillBrush = Brushes.Red;
  
  rangeCursor.FillBrush.Opacity = 0.25f;

  Everything works until the last line where I try to set the opacity.  I get this error:

  An exception of first chance of type 'System.InvalidOperationException' occurred in WindowsBase.dll

  Additional information: unable to set a property on the object '#FFFF0000' because it is in a read-only State.

  If there is a handler for this exception, the program can continue safely.

  Is it possible to avoid it?  I have actually even need to change opacity by programming, but when I put FillBrush to red it changes the XAML setting hardcoded 25 to 100%.  This is why I am trying to add this line.

  Thank you!

  The WPF Brushes class returns shared brushes, which are in a State (read-only) frozen. This avoids a local change to a brush to any other object in the application that happened to use the same brush.

  As described in Freezable Objects Overview, to modify a frozen object simply call the Clone method and together Opacity on the result.

• Whenever I run Norton power (NPE) gum, this "rikvm_06A08EA1.sys" was released as a malware.

  rikvm_06A08EA1.sys

  Whenever I run Norton power (NPE) gum, this "rikvm_06A08EA1.sys" was released as a malware. Despite all efforts to get rid of it, this continuous malware appears each time I run the NPE. I ran the Windows security program, and he did not find this malware. Later, re-, I ran the NPE, and the malware was found. What should I do? Thank you.

  Contact support Symantec.com.

  http://www.Symantec.com/index.jsp