Open/close on ToolTips button?

Is it possible to have a button "open/close"?  I would like to have a tool tip say 'Open' when it is idle, and then say 'close' when they are active.

Try changing the Position of the composition of the stacked ToolTip which will close 'Part' button to choose. Then change the options to Show and Hide target on click. See if this configuration matches your needs.

Thank you

Vinayak

Tags: Adobe Muse

Similar Questions

  • Replacement drive DVD open/close button does not reach (model HP p6110f)

    Hi all

    I replaced my DVD drive on my P6110F desktop with a model from Asus. Everything works fine * except * the fact that existing teeth of the open/close Panel button do not reach the real button on the disc itself, me leaving no option but to use a desktop widget to open the CD tray.

    I searched on the net and can't seem to find a solution. Any ideas on how to make this work? Thanks for your suggestions.

    Czar

    I had the same problem with my P6-2371ea, so what I did adjust the screw until it touches, then tighten them, if it is not an option due to too much of a gap to take the front off the PC and put a match with adhesive tape double sided on the DVD button or something similar it has worked for me in the past

  • Dell Inspiron 560 No. open/close the dvd player button

    How can you "manually" open/close the dvd drive on the inspiron 560? It is not a button manually open/close the dvd player, and it's frustrating!

    Laughing out loud! Thank you! I found it after doing some detective work! Thanks again!

  • Cannot open/close the tabs that are part of an open folder - as of ghosts

    When I opened a new tab, sometimes 2 or several tabs appear and cannot be closed and then this page is not able to be visited. They are as ghosts - they appear, but you cannot open/close them (they can be pinned, however, but still not able to be read). Thank you

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

    • Do NOT click on the reset button on the startup window Mode without failure.
  • Conditional action using hot and cold state to open/close toc

    I am trying to create a button that will open/close the table of contents and when you click top toggles the State of the icon/button hot/cold.  Essentially using a transparent icon of smart as a button.  When the button is clicked will open the table of contents and the icon will change to the State (hiding the cold status icon), then when you click above the table of contents again will be closed and the icons to switch back.  I have my action is defined as shown in the images below.  Any ideas would be greatly appreciated.initial state.jpginitial state else.jpg

    Have you read this: buttons in the form of rocking - Captivate 6 - Captivate blog

    Scenario 4 is what you want: have two buttons to the form and use an advanced standard action for each of them.

  • Several regions HideShow - open/close All

    With the help of Oracle 10 g, Apex 3.1.0
    I have a page with several regions of the hideshow.

    The customer wants to be able to open or close with one or two buttons ("OPEN all THE ',' CLOSE ALL ') but who still have the standard ability to open & close (one at a time).

    Possible?

    Bob

    Bob,

    Here is the link: http://www.apex-blog.com/oracle-apex/hide-and-show-all-regions-29.html

    Thank you
    Pradeep

    Published by: psanjeev on September 29, 2009 10:09

  • What is the shortcut to open. close the sidebar?

    I was very used to having F9 on every platform to open | close the sidebar.
    As I am a keyboard people, the by clicking the icon to the sidebar is not a perfect solution. You had the shortcut and it has now disappeared.

    I respectfully request for this return.

    No troubleshooting information is necessary, because it is not a failure.

    @Aleksej:... I'm sorry, I don't remember which version I used. If that was removed long ago, I was stüch with an older version of Firefox.

    COR - el gave a clue. It could be the responsibility of the developer who creates content for the sidebar to have a shortcut to open | close the content itself... So I'll ask the people delicious to help me in this direction.

    Thanks for your advice! (good questions that has pointed out to me on the 'node' of my question)

  • Please can you put the "Open a new tab" button back where he was on the right side of the tabs, or at least give the opportunity to put it there? Thank you.

    In the row of tabs along the top of the screen, there was an additional tab with a + in what you clicked to open a new tab at the far right of the tabs. As the tabs still float to the left and new tabs appear on the right, it was (in my opinion), the most logical place for it. However, the only two places I am able to put this "tab" are now on the far left, which is illogical, because the new tab appears on the right, or in the toolbar and other tools. It's enough, but I'd rather see the 'new tab' tab back where she was.

    Moreover, the option to put it on the right end of the Ribbon tab did not work up to this latest version of Firefox, but I'm sure you know this!

    Open the view to customize and use the default for "Open a new tab" button back where it belongs.

  • my firefox opens without the firefox button in the upper left corner

    I have the 9.0.1 installed on Windows XP Home edition, but it opens without the Firefox button that appears in the rectangular box at the top left of the screen. It shows no File, Edit, View, history, Favorites, tools, and help.
    Should I have the Firefox button? Do I still need it?

    Thank you.

    (useless link removed by moderator)

    Hi sanfran.

    The Firefox button can be turned on/off at will. To activate it, you can just go to view > toolbars and turn off the menu bar. This article will guide you in the process.

    By using the menu of Firefox is really just a personal preference. There is no advantage 'real' use it or not.

    Hope this helps!

  • How can I move the "Open a new tab" button on the left side to the right place

    How can I move the "Open a new tab" button on the left side to the right place

    You must customize it window opens first in order to move around the icons on the toolbar and on / off. Both told us that you can move the icon tab that sits on the tab bar and resembles a + to another bar toolbar or on the left side of the tab bar.

  • 'open a new tab' button on the toolbar will not insert a new tab after current

    I want to open a new tab button at the right end of the tab bar to open a new tab, after the currently open tab Similarly the browser does when the browser.tabs.insertRelatedAfterCurrent profile option is set to true.

    The current behavior is VERY annoying that I still have many tabs open and then scroll all the way to the right of the tab bar and drag the new tab to where I want, which is always on the active tab.

    Not sure if this has been already supported but if not, I used to run Tabberwoky which is no longer works and I became very fond of the function and I do 8 Firefox to do this.

    Please tell me how, that I cannot or should do otherwise.

    Thank you.

    Try this extension:

  • Satellite C650 froze - I can't open/close all programs

    I have a Toshiba C650 model 1CP, which froze.
    I have connected previously, entered my password and then clicked on the icon of Kaspersky 2011 update and then the laptop just froze.
    I can't open/close all programs or even stop it.
    I am unable to do anything else that the pointer autour.

    The other specifications of my laptop:
    Intel Celeron T3300
    Microsoft Windows 7 Home Premium 64-bit.

    I bought the laptop in September of this year and ensure that all operating systems are up to date, Kaspersky is the only program I have installed on it, the paid version I have for my home PC allows 3 users.
    Other programs on the laptop came pre-installed.

    Any help would be received with gratitude,

    Kind regards

    TerenceM.

    Hello

    Have you tried to reset the laptop back to factory settings?
    Use HARD drive recovery. Turn on the device, press F8 and choose fix my computer.
    Then choose HARD drive recovery.
    This function will set the unit until the first day of purchase

    I'm not quite sure what happened with your device but if he s related to the software, then the recovery procedure should help you to fix this m

    Welcome them

  • By clicking the "Open a new tab" button or "Ctrl + T" no longer opens a new tab. How to bring back this feature?

    By clicking the "Open a new tab" button or "Ctrl + T" no longer opens a new tab. How to bring back this feature?
    When I click, try a right-click of the mouse to open a new tab, type or use the file menu, nothing happens. However, I am able to open links in a new tab.

    The Ask toolbar is originally only in versions of Firefox 3.6.13 +. Obviously something in this extension is not compatible with a Firefox security patch. Disable this extension or uninstall it.

  • Whenever I close Firefox Bookmarks button disappears from the navigation toolbar

    I just upgraded from Beta 3, which worked well for Beta 6. Now everytime I open FF the favorite button is missing from the navigation toolbar and I re - it to reside manually.

    This can be caused by a corrupted file, for details about setting see the article toolbars and window size changes are not saved .

  • What is the best way to open close, then send instrument labview teststand model handles parallel?

    I have a number of test systems that use a parallel model with labview. We have a number of instruments (PXI).

    What is the preferred method to open, close and passing instrument handles with labview teststand?

    Hello

    A few ways

    1 package return the session as a U32 handle, there are a few VI TestStand i of the palette of TestStand that you can use to make conversation.

    2 through a LabVIEWIOControl. TestStand handles these.

    3 do something fance as the use of LVGOOP and leave the handle as an object property and leave in memory. for example, do not pass it back at all.

    One thing, you'll have to monitor multiple executions trying to talk to the same instrument, use some lock/unlock or synchronization to avoid thi.

    Concerning

    Ray Farmer

Maybe you are looking for

  • Satellite C50 - Has important questions for keyboard

    I have a C50 - A Satellite with some of the key works and others aren't important issues for keyboard. For example, none of the keys work, S, and D do not work and when I press the space bar I can sometimes get the letter S to work. I tried two new k

  • Tag documentation bug

    Hi all just found a bug in CVI 2013 sp2. I have a function with a variable number of args: void Secure (const int main,...) { ... } I started typing on it: HIFN whatever HIPAR main / something HIPAR... / others HIPAR... / more ... And CVI crashed.  T

  • Pavilion F9J38UA #ABA: lack of Ethernet on Win 7 install drivers

    I bought a laptop Pavilion, and the first thing I did was to downgrade to windows 7. Now, I have no drivers for the following items: However the two I care most are my ethernet and network controller. I have tried everything I know (and apparently ev

  • Upgrade laptop computer Ram

    I have a hp laptop 1301 tx and I want to know my upgradation ram on the properties I have seen my type of ram is D 1333 ram and I ordered for kingston 2 GB ram which has Type of memory: 2 GB (64 x 256 MB) 1333 MHz DDR3 SO-DIMM Memory StandardDR3-1333

  • trojan.fakeMS - how to remove?

    Hello Hoping that someone knows about it and can help. I picked up a Trojan horse detected by Malwarebytes (Trojan.fakeMS), but this malware program can't remove. Whenever I run the program it identifies Trojan horse and when I select removal, said M