Open the file Image large

Similar Questions

• Photoshop CS6 will not open the file image (.jpg, .dng and .cr2)

  Hello

  I recently reinstalled my laptop (64-bit) Windows 7 Pro. It has all the necessary Windows updates.

  I installed Photoshop CS6 (64 and 32-bit) and I've installed all the updates it needs.

  It will not open any JPG or RAW, .tif, .jpg, .dng and .cr2 files. Before you reinstall Windows Photoshop worked well.

  When I try to open an image file that Photoshop does not open, so the file type is associated with Photoshop, but that's all. The software is running, but it won't open the jpg or tif, and it does not open Camera Raw to display the RAW file.

  If I double-click on a new image, then a new instance of Photoshop is open, in addition to the already open instance, but still no picture.

  If I click file-open and navigate to the file it will then open in Photoshop and Camera Raw 9.1.1 and the picture shows successfully.

  Strange!

  The only thing I think currently, is that I have 2 partitions on the laptop, with C: and a D: readers, with the users folder, which is held on D. Photoshop is confused by there? Well it is exactly how the laptop has always been in place, and it was already defined in this way before Photoshop has been installed.

  I tried to uninstall and reinstall. I tried to install just Photoshop 64 Bit, not 32 bit (I don't really know why I get the two offered, to be honest.)

  I am now lost and would like to receive helpful suggestions!

  I "solved" this problem!

  It seems that Photoshop won't open these files from a Windows 7 'Library' that points to a redirected folder.

  However, if I create a mapped drive with a drive letter local, the actual path of the files, (for example \\Server\FolderRedirections\Michael\Pictures), then it works OK.

  It is a good work-round and it makes no difference to me if I use a mapped drive or library I put just one correct, in the section 'Favorites' from Windows Explorer.

  Thanks for the suggestions guys, that helped me a lot. I hope this answer helps someone else, even if my situation may not be a common scenario.

• Cannot open the RAMDISK IMAGE file MINIPE\WIPE.IS_ CAN NOT BE LOAD error Code is 7

  HELP PLEASE

  I forgot my windows password 8 Pro. Tried several programs Freeware - different product Code to these Apps - no work!

  A reset of password - but is fails (cannot open the RAMDISK IMAGE file MINIPE\WIPE.IS_ CAN NOT BE LOAD error Code is 7)?

  Do I have to buy a soft reset? Buy new Microsoft product key?

  I read somewhere that I can use regedit (run as administrator), but have no details. I thank all of you for your help since. I would really appreciate help with this or I'm screwed.

  Thanks again

  Hippie TOKE

  Hey Hippie,

  Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  Please click the link mentioned below on Microsoft Policy all lost or forgotten the password.

  http://support.Microsoft.com/kb/189126/en-us

  Answer please if you have any questions.

• The preview of a selected image no longer appears in the window open the file

  I have CS2 in the Windows and Mac versions.  For the most part, I use the Mac version.  On this one the preview of the selected image no longer appears on the window open the file.  He appeared, but recently ceased to appear.  This makes the image to open much more difficult.  How can I get the preview back?

  No thumbnail appears in the open dialog box or the thumbnail is black?

  Is this with any file or only those registered lately?

  Are your windows system files?

  In the open dialog box you have to display thumbnails?

  

  If you have recently registered their CS2 mac, you have Macintosh thumbnail checked in file management preferences?

  You use the open dialog box standard or the Version Cue one?

  

• I can't open the files in the folder "my pictures."

  For the last two weeks, I was unable to open the files in the folder "my pictures." For example, if I save the photo in my pictures, it will not open if I double click on it.
  Someone at - it ideas?
  Thanks in advance.

  Hello Tim

  Is there a message if you want to open it? You can copy data to another folder in my photos and open them?

  You have this problem just with images or even other files?
  Give us more information.

• XP Pro SP3 - C:\FOUND.001 file-"Access denied" trying to open the file

  XP Pro SP3 instance reported corruption in the settings & Doc. Ran CHDKSK/f, then logon has not read the profile & given by default.  C:\found.001 was visible during logging ADMIN & No.  Removed the HD and mounted as external USB media to another PC with kit I use & even after "property", not "Access denied" trying to open the file.  ATTRIB = SH & can not change (access denied).  You will need to recover Outlook.pst & other files.  Ideas?

  Thank you

  Michael

  Try to start your system from a "Live Linux" CD free.  This CD runs a version of Linux without installing anything on your hard drive.  To create the CD, you download a file ".iso" and feature "Burn Image" of your CD burner to create a bootable CD.  The advantage, that you win, is that Linux is a lot less strict with permissions, so you should be able to access your files and copy them to a USB device.  Some Linux Live CD are:
  Knoppix: <> http://www.knopper.net/knoppix/index-en.html >
  Ubuntu: <> http://www.ubuntu.com/download/help/try-ubuntu-before-you-install >
  Ubuntu is actually an installation disc, so be very careful to follow the 'Try Me' instructions so that don't accidentally install you it on your hard drive.

  An another boot CD, you might try is "Hiren".  It is in fact a version of "First environment" of Windows XP, so you could get access to some files that you would otherwise not not when starting on this disc.
  Hirens: <> http://www.hirensbootcd.org/download/ >

  HTH,
  JW

• Problems to open the file in Windows Moview Maker

  I work on a Windows Movie Maker file last week, upload music, photos and video clips and count the final transitions. Never had a problem opening the classified. Today, the file will not open. The answer I get is:
  "The file was created by a version of Windows Movie Maker that is not supported." Why is - what happens after 6 days of work on this project?

  I worked on a Windows Movie Maker file last week, upload music, photos and video clips. I'm almost done with the project and start the final transitions. However, today, I was not able to open the file. The answer I get is: The MSWMM was created by a version of Windows Movie Maker that is not supported. "Why is - what happens after 6 days of working on this project without any problems. Please please help.

  =======================================
  The project .mswmm file seems to be corrupted. I feel
  you have to start over.

  Large, complex projects tend to cause problems... the best bet
  would be to create several small projects, Publishing (economy)
  each of them in the format .wmv movie to a folder on your hard drive
  drive and then re - import clips video .wmv collected and
  combine them into a final video file.

  Or... import clips .wmv in creation of DVD and each Let's
  become a scene (chapter), you can have up to 18 scenes.

  FWIW... many file formats are would have been compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv or dv - avi
  Music - wma, wav, wmv

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How to open the file? Many types of files, check the type and call app to open it.

  HI.everyone.

  I am doing a project like dropbox.

  The problem is:

  server-side has several files of different types.

  such as: word, excel, file, file pdf image and so on.

  After the file is downloaded.

  How do I know what app is the type of file.

  and call this app to open the file?

  I can get the file type of the file name extension.

  But I do not know how to find the application that can open this file.

  or if this device have any application can open the file. Then, it will show you an alter.

  like dropbox app.

  Please help me.

  Thank you very much.

  Hello

  For above 4.3 and higher, you can use API call to achieve this. In regards to my understanding, it works as follows (Please correct if I am wrong).

  -All files (PDF, excel etc) readers save with BONE graft as "I am able to open the file whose mime the type XXX.

  - So, when you pass the path to the API Invocation, it searches for reader app there is place and request that you open the file. (I know not if more a reader installed in the device that achieved reference)

  Here's the code that worked for me,

  Invocation invocation = new  Invocation();
  invocation.setAction(ContentHandler.ACTION_OPEN);
  Registry registry = Registry.getRegistry("");
  registry.invoke(invocation);
  

  If none of the application saved in the requested file format it then throws the exception.

  Another option is to pass the path to the browser by using the private API to display the files...

  Let me know if it works for you...

  Thank you

• Open the files in several folders and run

  Hello guys,.

  I have several files in several folders, I would like to know is it possible to automatically open the files in folders and execute action defined in PS.

  Example: I 1-folders12 (folder name will change regularly), I have 5 files in folder 1, 10 in folder2 and 7 in folder3,... and so on.

  I need a script to open the files one by one and perform the action to the PS and nearby, once all the files are processed in the Folder1, the script should search for folder2 and until the last folder. Is this possible? looking for consultant.

  

  This should be possible with just using Image Processor, which comes with the PS. Just check the box that says to all subfolders.

• Windows 7 a vmdk file not found, cannot open the file '... Virtual Machines.localized/Windows 7.vmwarevm/Windows 7. VMDK

  Could not open the file ".../Documents/Virtual Machines.localized/Windows 7.vmwarevm/Windows 7.vmdk:

  Help, please. I copied this over from a backup and it does not open. I joined the collection of support...

  Thank you very much!

  B

  it2webber wrote: could not open the file ".../Documents/Virtual Machines.localized/Windows 7.vmwarevm/Windows 7.vmdk:

  Help, please. I copied this over from a backup and it does not open.

  How the Virtual Machine has been backed up and restored?  If Time Machine then...

  It is a known fact that Time Machine is not 100% reliable backing up/restoring VMS in all circumstances/conditions.  Also back up Virtual Machines via Time Machine of disk/time intensive and wastes a lot of space for something that may be corrupted and worthless time to restore it.  At least I would exclude the Virtual Machines with virtual machines and Time Machine shutdown, not suspended and VMware Fusion closed and then manually copy the VMS to another location, preferably on a different physical hard drive.  So keep the user data stored in the virtual machine saved out of the Virtual Machine on a regular basis in order to always have a backup of the current user data.  If you need to restore a properly saved by VM is not as common at least you will have a virtual working Machine and data user to go forward with when you find out your Time Machine backup of the virtual machine fails.  Also take a look at: best practices for backup of virtual machine (programs and data) in VMware Fusion (1013628)

  That said, if you don't have a copy of the file "Windows 7 - f004.vmdk" and then to try to retrieve the data from the user, you can try the following:

  Download then unzip it (double-click on) the joint "Windows_7 - f004.vmdk.zip" file that contains the file "Windows 7 - f004.vmdk ' an empty logical binary measure that has been created on the metric of the existing drive and add to the Package of the Virtual Machine.  This should allow the VHD to be considered as a virtual hard drive, assuming that there is no damage to the extent of the binary left headers.  Take a look on: work with Virtual Machine packages

  At this point, that the VHD has the scope necessary to show as a full disk, assuming that it is not corrupt the header in other binary extensions and can now attempt to access for the recovery of user data.

  There are several ways to try to retrieve user data.  The easy, although not necessarily work properly according to what now lack us due to replace the missing binary extensions with a logical empty measure, is trying to start the VM normally.  If the virtual machine starts up on the desk and VMware Tools load properly you should be able to copy your data to user off on a USB or slip and fall on the side of Mac or if you have a configured VMware folder then copy the files through it.

  Other methods involve starting the Virtual Machine with a Live OS ISO Image and copy files from a USB key or temporarily assemble the VHD to another Virtual Machine work.

  With the right tools installed the virtual hard disk could also be mounted as another accessible Volume through Finder.

• If I buy adobe Elements 10 or later what software should I make the DVD to mov files, the files are large and I know they must be compressed and I don't want to lose quality... I know that adobe pro you still need software, but will still work with el

  If I buy adobe Elements 10 or later what software should I make the DVD to mov files, the files are large and I know they must be compressed and I don't want to lose quality... I know that adobe pro you still need software, but will still work with the elements and may itself make the compression... I know it can burn DVDs...

  vidog

  If you burn to a DVD disc in first items 10 and later versions, some choices are

  a. DVD-VIDEO standard screen or 4:3 16:9 on DVD disc

  Both will have the frame size of 720 x 480 pixels. But the big screen comes with a 16:9 flag that extends approximately 856/480 16:9 display video after encoding. The screening is not adjustable by the user... and you end up with the DVD-VIDEO format @ 29.97 images per second interlaced.

  b. format of the AVCHD on DVD

  Here is the video display 1920 x 1080. And, depending on the version, can be 29.97 images interlaced per second, or 23.976 progressive frames per second (if not just 29.97 images per second interlaced). Although you can generate some AVCHD DVD with a regular DVD burner, DVD AVCHD is in need of a blu - ray player that supports supported AVCHD DVD or one of these drives multimedia multi which is also.

  c. If the player allows... you can export your Timeline file saved on a USB Flash drive and then insert this USB Flash drive in the drive to get the reading of the file. On this route, you can set the Premiere Elements avancΘs to customize your choice of export preset.

  Please consult the bulletin and consider then, let us know if we have targeted your question. If this isn't the case, please give more details in the areas where we do not have.

  Thank you.

  RTA

• Cannot open the files from the shared network drive

  Hi, I am trying to open a file located on a server of storage attached to the network in a shared drive. When I try to open the file in Photoshop CC 2014 directly or by double-clicking in the file Explorer, I get a pop-up box in Photoshop that says that the image of CR2 is not the right kind of document. If I copy the file to another USB drive attached, the file opens correctly in Camera Raw.

  This will give you tangentially more insight in the work through a network to NOT be supported by Adobe:

  This is the standard text often used for saving to a network (NOTE the part where he explains that normally, it works, but it is impossible to solve someone else on the network remotely, and that's why he didn't is not supported by Adobe):

  If you open files on a network, or saved on a network server, please cease and desist immediately in the case where you currently have problems with one or more files. On a network is not supported.

  See:

  http://kb2.Adobe.com/CPS/406/kb406793.html

  Copy the local file CLOSED your server hard disk, work on it, again to save it on your local hard drive, close it and copy the closed file on the server.
   
  Of course, the fact that Adobe does not support work on a network does not necessarily mean that it doesn't work.  It should be.

  Adobe position is that there are too many variables in a network environment for them to ensure that everything will work properly in all systems, particularly in view of the fact that that something will not work properly, it is probably the fault of the network, and Adobe has no way of troubleshooting of your network.

  If you are unable to work locally, you are yourself, and if something happens, you're on your own. If you work from a server, make sure that your network administrator is a competent professional.

  When problems arise, much valuable work can be lost.

• Could not open the file [/ oracle/deployments/Tomcat5/eas/temp/tempfile2320810pl]

  When I do a load of level 0 of my office, I get this error?
  
  Could not open the file [/ oracle/deployments/Tomcat5/eas/temp/tempfile2320810pl]
  
  Unexpected error of Essbase 1090004.
  
  Please notify

  When you do a load of data on the client, if the file is not a server file that essbase has copy on the server so that it can load. That's why shipments of server-based file are so much faster, especially for large files. I'm guessing that the ID has no authorization to this tmp directory. The message, it looks like a system Unix-based. Check with your Unix administrator on the permissions on this directory

• "open the file in Photoshop" no longer works.

  When I right click a Photoshop image has launched in Lr (latest version) and choose "open a file in Ps (CC 2014)", but the image doesn't appear.

  I tried several times, with Ps closed or open, but nothing helped. Open the file in works 'smart object in Ps' format and also to open the file in a third party application (perfect effects 8) works very well. Just Ps CC 2014 does not load the image in Lr.

  Any tips?

  Mac OS X 10.9.4 and Adobe CC, all products at the most current level.

  See the following article:

  Change in does not work in Lightroom Photoshop CC 2014 5.5

• By pressing 'o' in review mini bridge mode is not opening the file in Photoshop

  New user of Photoshop here and going through the basics.

  When you use the view Mode in mini bridge I can scroll the images using the right/left arrows open the head image in Camera Raw using the 'R' key, and pressing on the 'o' key does not open the file in Photoshop, I knew that it was supposed to. Am I missing something obvious?  By pressing the 'o' key doesn't do anything.

  With the help of Photoshop CS6.

  Thanks for the tips!

  -Daniel

  Gene,

  Unfortunately, this did not turn.

  I have exactly the same problem on two systems, two Windows 7 based charge installs CS6 and Lightroom 4.

  Spent a good support of 45 minutes on the phone with Adobe and they are scratching their heads as well.  Now it seems that the revision in mini bridge would be a great way to open the files that you want to use, but in reality it does not work.  The tech that I do business with Adobe is to have exactly the same problem as well.

  Not quite ready for prime time...

  D