Open the windows Explorer with no expanded document folders

Similar Questions

• Cannot open the Windows Gallery with error message: "you may not have enough space on your hard drive or critical files may be lack of Windows.

  Original title: Windows Photo Gallery problems

  I have a problem trying to open Windows Photo Gallery, when I click on the program tab I get an error message saying: Photo Gallery cannot start. You can have enough space on your hard drive or critical files may be lack of Windows.

  • NO Mahesh B G , is not windows live photo gallery, windows photo gallery & is the message I get "could not open the Windows Gallery with error message: 'You may not have enough space on your hard drive or critical files may be lack of Windows'." Thank you Dave 07/11/2012

  Hi David,

  1. have you made changes on the computer before this problem?
  2. are you referring to the Windows Live Photo Gallery?

  Please follow the methods and mark the question below:

  Method 1:

  Fixed problems with Windows Live Photo Gallery that does not:
  http://support.Microsoft.com/mats/windows_photo_and_slideshow_diag/

  Method 2:

  You need perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot State, you must follow the steps in the article mentioned below and check with the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 7 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

  I hope this helps.

• Can you please tell me where to locate the Windows Explorer with Windows Vista?

  Can you please tell me where to locate the Windows Explorer with Windows Vista?

  Thank you for your sincere help.

  Start | All programs | Accessories | Windows Explorer. Or, just use the Windows key and the E key.

• Cannot open the windows Explorer

  I can't open windows Explorer

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

• Family Vista premium SP2 - NAS - I can see it, can open its highest level, can go through it with the windows Explorer - strangely I can browse it with windows internet explorer 8 - what's up with windows Explorer?

  I have a WD NAS, who has worked through my Explorer windows until recently - now I can access only through Internet Explorer 8 using FTP.

  I use to be able to open the windows Explorer and able to 'network' and click on the NAS and enter my name/password and access all folders and files to the breast. Now I go into windows Explorer and I can see the NAS and I can click on it and enter my name and password, and it shows even the top-level folders-

  I can't do any further due to the standard contextual windows alert, and the message goes between the "network name is not available" and the message "already mapped the drive. I have not noticed a model and did not install anything at the same time. Don't try to do wireless, the NAS is ethernet wired to my router and my router to my computer - no router updates/changes - no updates/changes NAS - no I do not have the mapped drives sitting over there, yes I'm admin on the computer and the NAS server - there is no noticeble change I can find - not firewall , no anitvirus, no microsoft updates - anything good for troubleshooting?

  Anyone has an idea why only windows Explorer fails now to be able to access the NAS, esp when FTP with internet explore works fine? Thank you!

  Hi Dgbjr68,

  Try the following steps.

  Step 1

  Check the behavior in SafeMode with network and post back the result.

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2

  You can also try to temporarily disable the firewall on your computer and check the status.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  NOTE: Enable the firewall after trying this step.

  Previous post: the results.

  Bindu S -Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Windows Search is not working/libraries will open in Windows Explorer after Windows 7 SP1 update

  After execution of Windows 7 SP1 update and restart the computer, Windows Search is no longer works and the libraries of the desktop icon does not open Windows Explorer.

  Note, I can open the Windows Explorer (WIN + E) and go to %AppData%\Microsoft\Windows\Libraries without any problem.

  Is there any solution for this?

  Hello

  1. what happens when you try to open libraries by using the desktop icon?

  2. do you get an error message?

  Method 1:

  Follow the link below and check if the problem persists in safe mode.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 2:

  Follow the link below and open the troubleshooter of search and indexing and check if it helps.

  Open the troubleshooter for search and indexing

  http://Windows.Microsoft.com/en-us/Windows7/open-the-search-and-indexing-Troubleshooter

  Method 3:

  Follow the link below and run the fix - it tool and check if it helps.

  http://support.Microsoft.com/mats/windows_search/en-us

  Method 4: Perform a clean boot.

  To perform a clean boot and see if the problem still occurs, follow the steps in the below link.

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 7 in the link to your computer in normal mode.

  Let us know if it helps.

• Cannot save the document - read-only or opened by another user error occurs when the PDF is opened in Windows Explorer

  Adobe Pro XI - use the operating system to Windows 7 Pro

  When a PDF document is open in Windows Explorer, and pages are added, deleted, ratings, all types of changes, he cannot be saved until the Windows Explorer is completely closed.  If you try to save the document, you receive the error message next - "the document could not be saved.  The file may be read-only, or another user may have his opening.  Please save the document under a different name or in a different folder. «I have confirmed the document is not read only, it is not open by another user, and this is not open many times.»  Once completely, you close Windows Explorer and try to save the document, it saves without problem.

  Are there settings in Adobe Pro XI or Windows that allows you to save documents without closing Windows Explorer first?

  Thanks for any help you can provide.  This error is a frustration because I open all my documents via Windows Explorer.

  Turn off the preview in Windows Explorer.

• After purchasing the software to export PDF online when I try to perform a "file/save under ' when viewing a document on the web, it hangs to the top of the windows Explorer.  I get "file save as - does not.

  After purchasing the software to export PDF online when I try to perform a "file/save under ' when viewing a document on the web, it hangs to the top of the windows Explorer.  I get "file save as - does not.

  Hi douglash21414001,

  I think maybe it's a coincidence, that nothing is installed with ExportPDF, so nothing should have changed your web browser. That said, you can clear the cache of the browser and then re-open your browser. (What browser do you use?)

  You can also try to restart your computer, if the browser is restarted does not solve the problem. But still, I don't think that this problem is related to the ExportPDF.

  Please let us know how it goes.

  Best,

  Sara

• How to change the folder opens when windows Explorer opens

  In XP Service Pack 3, when Win Explorer is open, files that open has changed on its own (or I don't know what I did to cause this change). Records of Documents are all posted, but the C: drive is closed, where it will display all folders to open at this stage.

  How can I reset so that all the files under C: drive open when I open Win Explorer?

  Kind regards

  bytes2001

  Hello bytes2001,

  I enclose a link below that I hope can fix this problem.  Please let us know status.

  How to customize the Windows Explorer views in Windows XP: the bottom of the page talks about how to change the default folder of Windows Explorer.

  http://support.Microsoft.com/kb/307856

  Thank you

• The action cannot be completed because the file is open in Windows Explorer.

  OK, it seems to be coming a lot but no one was able to respond (including Microsoft) so I'll ask, and be as specific as possible.

  Because I work with vector art that I constantly have to save files by crush the and everything was cool with WinXP pro.  I have Win7 Pro and everything was cool, until recently.  Whenever I tried to overwrite my files, I would get an error message saying that the file was either dead or opened elsewhere, but it has happened about 50% of the time.  A launch the re-registration of files with different names.  After obtaining the files re-registered I then try to remove and rename files, but found I couldn't do it anymore, as I was constantly getting the error message "The action cannot be completed because the file is open in Windows Explorer."  Closing and reopening the browser do nothing.  Someone said if not empty the trash bin works, but not for me.  The files are on an external drive, I tried to disable the cache of writing by Device Manager and Windows Management Console (or other) frozen and took the pc with it (nice work, MS!).  Reboot seems to fix the problem for a bit, but he returned quickly and randomly.  It also seems to randomly select to lock files.  Some files I can not change, some that I can.  Others begin to operate after some time of inactivity.

  I tried to disable thumbnails in Explorer and even added a DWORD NoThumbnailCache in the registry, but it still happens.  Basically, I'll have to save all of the new files over and over again and that from time to time be able to remove the "old" while being only randomly too write others.  This question seems to be infestation Vista and Win7 and people have waited for a fix, Microsoft, but was mum on the issue.  If anyone can come up with a solution, it would be great.  It is killing my productivity!

  Common guys...
  Im having this problem too and I've been thought IE9 is at the origin of the problem, some how, I don't want to disturb...

  Here are some solutions:
  Please note that I'm looking, there is not any solution patch for this program by Microsoft, you can maintain it yourself. And correct solutions in this way losses.

  Solution 1: Use CMD.
  0 - note the following 3 steps will complete the process explorer.exe, so your desktop and windows Explorer all open files and any associated process would stop.
  1. run the Task Manager. (by pressing ctrl + shift + esc or etc)
  2 - go to the processes tab.
  3 - find "explorer.exe" and click on the button "complete the process". If you find several explorer.exe, kill them all.
  4. now, click the menu file-> new task (run...)
  5 type CMD, and then click OK.
  6. now you can do something you couldn't have done before with this user interface. Some useful commands:
  -cd: change the current directory. Use 'CD..' to the 'button' in windows Explorer.
  -dir: lists the existing file and folders in the directory current. Use ' dir/p' to the list in the pages.
  -del [file name]: removes the file [filename] existing in the current directory.
  -Rename [name of file] [new file name]: rename the file [old file name] existing or a file existing in the current directory to [new file name].

  Solution 2: Use a different file manager.
  0 - install and run another Manager file as "XYPlore".
  1 Note that the following 3 steps will end your explorer.exe process, so your desktop and windows Explorer all open records and all other related processes would cease.
  2. run the Task Manager. (by pressing ctrl + shift + esc or etc)
  3 - go to the processes tab.
  4 - find "explorer.exe" and click on the button "complete the process". If you find several explorer.exe, kill them all.
  5. use XYPlore UI and do what you want.
  Please note that the problem could happen with this kind of external explorers too. So close any file and go into a secure after your working directory.

  Solution 3: Do it yourself!
  If you can program, there are some codes that might help you. These codes which talks about Im, says MS Windows to remove your annoying pinned files just before you shut down the system.
  Here is an example:
  MoveFileEx ('C:\windows\system32\ld21E.tmp', nil, MOVEFILE_REPLACE_EXISTING or MOVEFILE_DELAY_UNTIL_REBOOT);
  This code will work correctly in Delphi from Borland compilers, and as you can see, the "ld21e.tmp" file is deleted after compiling this code and restart your windows.

  I wish I can do better, as to publish an Explorer that do what you want automatically, so I hope that these can be useful.
  Some how you can check this thread too, it may be useful:
  http://social.answers.Microsoft.com/forums/en-us/vistafiles/thread/ce44b65d-2430-4865-BC31-fd84d3085d74

• I received an email with an attachment that I downloaded, when I go to open the windows media center file opens but I can't find file what I do

  I received an email with an attachment that I downloaded, when I go to open the windows media center file opens but I can't find file what I do

  I was able to open using AbiWord, thanks for the reply

• Everyone has a problem with the Windows Explorer permanently closing?

  * Original title: Windows Explorer

  Everyone knows about a problem with the Windows Explorer (not Internet Explorer) without interruption closing? It is not fair on 1 computer, I have 2 desktops and 2 laptops, and it does on 4 of them. They are all running Windows 7, (1 to the publishing house, 1A Ultimate and 2 Professional).  I can right click on something, even on the desktop, and most of the time, I get a message that Windows Explorer has stopped and the ability to close or wait for it to respond. I have normally not 30 minutes or more to wait so that he could respond and if I close it, then it does nothing. I've done all updates are recommended for all my computers, I did the defragmentation, disk check, etc and it still continues. I need help, please. I am so sick and tired of what I am about to go to a Mac and I don't like Mac computers, but said there is much less of a problem.

  You have loaded all 3rd party "Add-ons" in common to all PC? For example (this is an old post Vista but gives the general idea) - http://answers.microsoft.com/en-us/windows/forum/windows_vista-desktop/windows-explorer-crashes-on-right-click/719385e6-fff5-498d-807c-103bf0344f44?page=1&tm=1423414000974 and see Ramesh respond.

  If not, is there clues in the log of events (errors) in common on all computers where the crash?

• How can I close a file opened in the open in windows Explorer (searchqu tollbar) program

  Searchqu tollbar is open in windows Explorer and I want to shut it down. How can I do?

  Many regard as malware, in programs & features so theres an entry uninstall them it.

  Otherwise scan your PC with this free utility

  http://www.Malwarebytes.org/products/malwarebytes_free/

  Otherwise, see this post above

  http://answers.Microsoft.com/en-us/IE/Forum/IE8-Windows_7/how-to-uninstall-Searchqu-toolbar/d0b18d31-097D-4A85-BB43-9f7a6c7c619a

• Hello, I bought a monthly license paid for indesign last night and I do not understand how to play with it? When I opened the window of creative cloud, they suggested me to buy indesign (but I bought it already...) Please, help me... It's easy to al amend

  Hello, I bought a monthly license paid for indesign last night and I do not understand how to play with it? When I opened the window of creative cloud, they suggested me to buy indesign (but I bought it already...) Please, help me... This is our easy to understand for beginners like me at all

  FAQ: What should I do if I have a subscription, but my application acts as if I had a trial?

  https://forums.Adobe.com/thread/1962238

  Download/install the desktop application, connect and install applications subscription.

  https://helpx.Adobe.com/creative-cloud/help/download-install-app.html

  Creative cloud to desktop

  https://helpx.Adobe.com/creative-cloud/help/creative-cloud-desktop.html

  Sign out, sign in | Creative office cloud app

  http://helpx.Adobe.com/creative-cloud/KB/sign-in-out-creative-cloud-desktop-app.html

  Install, update, or uninstall applications

  http://helpx.Adobe.com/creative-cloud/help/install-apps.html

• Why when I click with the left button of the mouse on the unique tool, you open the window with the other instruments?

  When I click with the left button of the mouse on the unique tool, open the window with the other instruments

  
  

  Mohito Hi, this morning, I solved the problem by trying to support. I realized that the problem was in mice, because the click rate is at its highest level, and then click the instruments was like if he did 2. I will now set the minimum speed of the clicks.

  Thank you