Opening of shutoff on Thin Client T610

Similar Questions

• Thin Client t610: ThinPro 5.2 size matters

  I have a bunch of 1 GB T610s and 5.2 ThinPro takes a large part of this space.  I found in the new version of a Component Manager app that is supposed to remove unnecessary features.  After removing several features that have been labeled, medium and large size, I applied the component configuration of the and restart the workstation.  Problem is that the size used flash on the screen on that Client has not changed and it shows 883 MB.

  Anyone have any suggestions?

  Thank you.

  UPDATE:

  I used EZ Update to download a new copy of 5.2 and said he did not save the configuration.  After the download, the device showed that Meg used 788.  Went into Manager components, removed 5 or 6 components, of which 3 have been marked as large (more than 50 MB) and applied the Configuration of components, and then I even deleted the snapshot of the factory.  Restarted the TC and the device showed 788 MB used.

  I only use PDR on these devices.  Someone has some tips on reducing the size by removing unnecessary applications?

  Thanks again.

  Register and then to apply the removal of component? There are two stages and several WARNING message and may require a reboot-auto.

  If you used like above, you would see that the free space is released via xTerminal:

  Administrator, open xterminal of management tool mode, enter:

  DF - hl

  compare the free space between before and after the withdrawal of the components.  It shows the space used / free real.

  On information system 1 page, it shows that the value of the free/used space fixed that you have installed the image first.  We can try to push an improvement in the later version.

• T610: thin client, multi-imaging platform

  Hi all

  IV ' e hoping to put this in the right place and someone can help or point me in the right direction.

  I'm looking for information on Thin Clients and Device Manager (HPDM), specifically on best practices on building and image capture, cross-platform and imaging would be advantageous.

  I am currently using HPDM Imaging for my thin clients t5470 and t5470e, t610, t620.

  I'm looking for a few docuemntation on recommended Configuration of HP for Imaging. is it to make a "gold" image or it can be pre-determined by HPDM like Microsofts SCCM or WDT?
  
  It would be fantastic if I could get it down to a single Image of WES7 for most of my Thin Clients if possible.

  Thanks in advance.
  J

  HPDM provides no functionality of creating an image, tt just do capture and deploy.

  The factory image include all drivers are built by HP R & D WES, there should be no one who can help you, but as far as I know there is no document to save the steps in detail. I suggest that you raise a ticket to impact to HP for help.

  MDT can not be used to deploy the image provided by HP. When building the image, no matter it is an original image or Thinupdate captured image, HP has done little customization in/after imaging process. I don't think that MDT can identify and carry out even these customizations.

• Thin client based on Linux T610

  Bulletin Board Hello!

  Just a few questions here I can't find via Google, manual and read other messages of the forum...

  We are trying to use a t610 with the Linux-based operating system and are facing obstacles, a little...

  I saw on the thin clients based on "Windows", after making a change to something, you have to 'Commit' changes...

  Is it possible to do it on a Linux machine? It seems that the operating system partition is read-only?

  Also, is it possible to navigate through the files and folders of this type of thin client?

  I see the terminal in "Administrator" mode and I can't type-nav files and folders through the text editor, but I am a semi-perte to do things this way...

  I know it of maybe a stupid question, but is there a way to recreate the image on this thin client to an OS based on "Windows"?

  The main problem I encounter is an add-on/extension in firefox is not 'stick' in my firefox browser...

  I installed the extension again and after I restart the browser, he is gone and my settings are back to "original"...

  I take a guess here, but I guess whenever this customer "reboots" the start of an image?

  One last question, is there of the "manuals" for those customers based on Linux?

  I see most or all aid seems to aim at Windows and would like to just a reference...

  Thanks for reading!

  Brandon

  If you're talking about the HP ThinPro OS-

  Before you can make changes to the file system, you must run this command from the terminal - "fsunlock". When you are finished, 'fslock' locks the system files again. There isn't another tool file explore included I know in ThinPro. Command line and the Notepad tool are the only real ways to navigate through the file system. If you need help with something, don't forget, it's basically a lighter version of Ubuntu, with a few extra utilities and GUI provided by HP. The nuts and bolts are identical to a version of Ubuntu, so I took a bit of insight of Ubuntu forums online for the problems I've had.

  Regarding your problem of browser extensions, depending on how you do this, you can configure connections to allow them to configure their own settings, or use HP ThinPro settings. If you've not allowed Firefox to create and use its own settings in the file system, nothing don't you change inside the browser will stick. I have not tried to install a browser extension, but I'm sure that this is your problem.

• Group ADF opening too many sessions of database JDBC Thin Client.

  Hi all
  
  I have several panels of the ADF, which allows the user to run some simple queries against a database of Oracle is using the view objects ADF and ADF view links and ADF application module.
  Each ADF Panel as I mentioned contains several queries view link and links in the form of Jbuttons to other ADF signs other ADF links running.
  Run Control Panel of the ADF as described here opens up to 21 sessions of data showing as "JDBC Thin Client" when I look at their place of session$ v.
  Why I find myself with a lot of databases of sessions.
  Why didn't he just uses one or two sessions of database to run all of these links to view? It seems that it opens a session of data base for each of these links to view.
  
  How can I change this destructive behavior? I have that one to see one or two sessions of database for the whole ADF matter how ADF display the links it contains.
  Your suggestions are most appreciated.
  
  Thank you.
  Bobby has.

  Why so many AMs? Can not put all the your under a single AM?
  Each AM you will use will open a connection to the DB.

• Thin client HP t610 thin WW: thin client

  Installed an update a few months ago, and everytime I turn on the thin client, he begins to initialize.  After that initial "starting Windows" screen it starts at the end of the update of Windows saying:

  'Stage 3 of 3 '.

  "Configure Windows update."

  '32% complete '.

  "Do not turn off your computer.

  If stays there for a few minutes, then it starts to close.  But it restarts the computer and is stuck in this loop, until I have turn off the workstation.

  NSMerrick, welcome to the forum.

  I think that you will get more responses to your question if you start a thread here.  They are the members who know the better your Thin Client.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• flexible thin client T520: T520 Thin Client, how can I join a domain?

  I need to put my thin clients on the domain.

  Do not click no right, no "system" in the control panel... How to loosen things up I can do a basic administration?

  Not quite what I needed.

  I am logged on as administrator

  There is no 'System' icon in "All Control Panel items" to interact with.

  in the Explorer, 'Computer' is not right clickable, so there is no contextual menu from the drop-down list select 'properties '.

  NETDom is not a valid command of the high - command prompt = yes.

  Is what I found to work through experimentation;

  From a command prompt, type "explorer".

  This opens a window of the Explorer, which lists the 'C' and 'RAMDrive.

  (Just by clicking on the start menu, and the computer in the conventional way, shows that "RAMDrive").

  From there you can right click on "Computer" and put in place the familiar 'Control Panel>>System Control Panel items'

  "Then it's the usual"edit parameters"in working to change group settings" area.

• Thin client HP t520: thin client HP t520 occultation

  Recently, we purchased a few t520 Thin Clients and cannot be shadown using 4.6 SP4 HPDM.  We shadown t510, 5730 and 5740 devices regularly.  With devices t520, the task starts, send, process, and ends, but never opens the shadow session.

  Good news - I got it working.

  Devices t520 necessary an update of the Agent.  Once the Agent has been updated, and VNC enabled - I could also shadown.

  Thanks for your help!

• HP t5570e thin client

  XenApp 6.5 HP t5570e thin client runtime environment. Thin Clients are running WES7 and connected to a domain. I am unable to get the EWF or FBWF configured to remind the end user to the connected computer. If someone has done this? Is there a way I can commit the overlay when logged in as a user? I'm open to suggestions. Users are tired of having to enter the domain/username every time that they connect.

  Thanks in advance!

  Hello BSx0083,

  The forums on that you post are model of consumer products. Since you are using a business solution, you want to display your query to the HP Enterprise Business Community Board that users there are more versed in these products.

• Thin client HP 5740e: HELP! Expired password and should be changed but access denied when you try to do

  Hello

  I have a thin client HP 5740e and for some reason any local user account requires a password change.  Yet, when I try to change the password it says access denied.  And yet, I can't it to allow me to move to another counts as administrator to open a session.  I held down the SHIFT key during startup, but it always goes straight to this local user account & the expired password prompt. I'm stuck in an infinite loop and do not know how to cope.  Safe mode puts me in the same situation.  And I can't update the BIOS because I can't have everything.

  OS = Windows Embedded Standard 7

  I also tried to reinstall the last image of the HP Web site using a USB key, but it fails every time. I tried 2 different USB drives with the same exact error no each.

  Image, try to install = SP56020

  ERROR: An unexpected condition has occurred

  Does anyone have a suggestion?

  I finally could get as an administrator using RDP to my office.  I didn't know the name of thin client lacked a figure, that's why I've been unsuccessful before that.

  Once I got away, I could watch the local user account permissions.  Now I see what was wrong.

  [Check]      The user cannot change password

  [Disabled] Password never expires

  I still don't know why I couldn't install a new image of the plant, but at least I am now able to work with this device.  I also disabled the automatic connection at the moment.

  Sorry to have littered the Forum!

• Thin Client T510: Do not support the SMB for no image preload on Linux platform

  Hello world

  I have a problem with a Thin Client T510 (C4G87AT #ABA), this one came with Windows CE and today I flashed with a USB to thin Pro 5 (T6X52011). When I want to deploy the image I captured (wallpaper, RD Session etc...) I have the following error:

  2015-08-19 15:30:43 [error details]:... /... / Task/linux/ImageTask_Thinpro.cpp@384: Metheod of the Image is not compatible.
  .. /.. / Task/linux/ImageTask_Thinpro.cpp@1624: do not support SMB for no image preload on Linux platform.

  When I look in the console HPDM, I see the T510 and connected

  Agent version: 4.6.3670.21244

  HDPM 4.6 SP5

  OS: T6X52011

  My OS: Windows 8.1 x 64

  Can someone help me please? Thks and have a nice day.

  Hi, thks for this Council. Theres is how I fix.

  Firstly, the master repository has change from D:\HPDM\HDPM to D:\HPDM on the server, so the configuration was not good at the moment. Another thing, the password of the user hpdm has changed in Active Directory, but not in the configuration. I changed all the settings for in line with the current configuration and capture Images of thinpro news works very well and deploy this new works pictures well too but Deplopyement of old images does not work.

  I'll open another thread if I need assistance. In this case, I'll mark as fixed.

• Profilinh ISE and Thin Clients

  I have 1.2 ISE and HP T610 customer light on the network

  802.1 x authorization works correctly, but clients are looming as HP-devices generics or HP printers

  I don't know how to create a strategy profiling custom for device "HP Thin Client.

  What conditions YES to assign customers HP T610?

  Thanks in advance,

  Vice

  Refer to the Profiler service to power down

  http://www.Cisco.com/c/en/us/TD/docs/security/ISE/1-2/user_guide/ise_user_guide/ise_prof_pol.html#wp1891315

  Profile services food application for permit in advance

• Zero Client vs. Thin Client

  I spent days trying to figure why my USB printers randomly stop working with my Zero Client/Linked Clones. I support the case open with VMware and Teradici. Anyway, as I continue to troubleshoot, I started to wonder, would I have the same problem if I was using a thin Client. It really makes me think, so I decided to make this post.

  I would ask you all, who is using zero Clients, that is using thin Clients (which models) and why?

  In my case, I'll settle for those using Zero Clients and Thin Clients that support PCoIP hear and I would like to exclude things like VDI Blaster and all types of jobs reallocated.

  I'm curious about the advantages/disadvantages of each.

  Thank you

  Mike

  I have two scripts VBS permanently running, one as an administrator and the other as the user.  The admin script periodically stop the spooler service deletes the spooler files (if they are old) and then restarts the service.  In our environment, all local USB printers are printers Dell.  The second script (which runs under the logged in user) periodically checks to make sure that the default printer is correct (ensuring that it's Dell). If a user moves from one client to another (where the default printer may need to be different), the script will change the default printer.

  If you are good with scripts, you should be able to adapt to your environment.  Otherwise PM me and I can help you.

  https://github.com/jftuga/VMware/tree/master/vmware_view_zero-client_printing

  -John

• Thin clients connect not to view.

  Good so it's weird. I have a HP thin client (model hstnc-006-tc is important) sitting in my NOC. I point to my server connection. I can connect to the domain controller in the thin client, see the desktop that the user has rights, but when they connect he says "the login server Vew prepares the office" and sits there for about 30 seconds. After 30 seconds, or so he error with the following error: "this office is currently not available. Please, try to connect to this desktop computer later, or contact your system administrator. »

  The inside of the connection manager, I see my office as available. It is active, title and power. I get no error on the part of the present events. Now, my connection to the server and the server vcenter actually live on different networks. Can only cause a problem? It wasn't when I was testing it from my office. I was under the impression that the customer should not talk to vcenter, it is only necessary to connect with the login server, ports 443, 3389 and 4001 are open to the.

  Any thoughts?

  Thanks in advance.

  Please check you can test using the full domain name

  Agent to server connection computer

  Client computer to the server connection

  Client computer to the Agent computer

• graphics problems "thin client".

  I've seen running and everything looks good until a program installation a standard XP box as a thin client. I converted it to make it work the customer view instead of explorer.exe on login. (it's in a VMware doc, I found)

  Now, the issue I'm having is that when you connect, there's the grid across the entire screen. Artifacts are left there when the windows are open. The grid lines are still behind most of the windows... except Lotus Notes window that runs through Citrix.

  Anyone know what could be the cause?

  Thank you

  Fritz

  P.S. Someone a script that will set up for users of Lotus Notes? (Note 7)

  Fritz,

  Looks like this might be bound to the version of the RDP client you have installed on your XP machine and not see specific, check out http://social.technet.microsoft.com/Forums/en-US/w7itproperf/thread/85cac4e1-b194-4c5e-a76c-693ddc6b290d. Try the upgrade to the 6.1 client and see if that solved the problem.

  Mike