Operate the WMB54G with Vista (Service Pack 1) - it works.

Similar Questions

• during the installation of Vista Service Pack 2, the computor has been disconnected. Now, I don't have an operating system and startup repair does not work. What should I do now?

  Computor was disconnected during the installation of Vista Service Pack 2. I did now no operating system and startup repair does not work. What should I do now?

  You may have to reinstall Vista from the original media or from the recovery partition according to the type of computer you have.

  Hope that you made the backup recommended all of your data before attempting to install Vista SP2.

• Guard of the Important Windows Vista Service Pack 1 (SP1) Windows Vista Service Pack 1 (KB936330) asks me to install after several successful installations

  Whenever I start my computer, the Windows Update icon is asking to update "Windows Vista Service Pack 1 (KB936330) Important Windows Vista Pack 1 (SP1).

  After several successful installations, the icon appears again with the same 'application for installation.
  Under the "updates installed", he said several times that the update was successful.
  Any remmedies or recommendations or is this normal?
  It all started after I reformat my computer.

  Hello

  Check to make sure that it is installed by using this method, there are Service Packs for other different applications that must also be installed >

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it is not installed, then choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And as appropriate >

  "How to hide or show an update of Windows Vista"

  http://www.Vistax64.com/tutorials/72491-Windows-Update.html

  See you soon.

• Logitech USB microphone does not work with Vista, Service Pack 2, PC. ____

  My Logitech USB Desktop Microphone does not work with my Vista, Service Pack 2, the PC.  He asks the driver, but Logitech says it's in the Vista software, here is the largest part of the error message:

  Windows has detected a new device attached to your computer, but did not find the driver software, to make the device usable. Each device manufacturer typically includes the driver from a CD that comes with the device, or for download on its Web site.

  Signature of the problem: Problem event name: PnPDriverNotFound Architecture: x 64

  This seems to be a problem that's happened, but after searching for hours, I can't find a quick solution.  Any help?

  Hello

  Please do as I suggested in the answer above is probably the solution.

  You can also do this after the above.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Windows Sidebar problems since the installation of Vista Service Pack 2

  I installed Vista Service Pack 2 today. After the installation of the windows sidebar has stopped working. For example the actions of Gadget, Gadget of the currency, in fact all of the gadgets that require a live stream display the message "Service unavailable". Some gadgets loading is no longer at the side bar, double click on, for example Weatherbug & multimeter (D).  I tried a system restore, but the problem remains, so I did an extra restore to indeed to reinstall Vista Service Pack. I also reset the router and Modem

  I tried to remove the gadgets from the sidebar and load it again but the problem still remains.  So I decided to download gadgets again on the Microsoft site but when I click on the link in the window "Get more Gadgets online" link does not work. This problem is only since installing Vista Service Pack 2 any what help you can give me to eliminate these problems would be most appreciated

  Tony

  Tony,
  Have you checked your firewall to see if the file sidebar.exe is allowed?  When you have downloaded the update it probably resets the security settings for this program if your firewall blocks most likely it.  First try.

  Have you double checked the control panel for the side bar to ensure that it was activated?  Again, the setting could have been modified by the service pack.
  Try this, it includes a section "fix it for me":
  http://support.Microsoft.com/kb/963010

  Let us know if it helps or if you need further assistance.
  Thank you

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• During the installation of Vista Service Pack 2 I get the following error message: ERROR_INVALID_PARAMETER (0 x 80070057)

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  80070057 ERROR_INVALID_PARAMENTER - E_INVALIDARG

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?  Who were these applications that run in the background when you tried to install SP2?

  A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

  Resources:

  How to fix the Windows Vista and Windows Server 2008 service pack installation issues:
  http://support.Microsoft.com/kb/947366

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been postponed until February 26, 2010, so move on! Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• How to fix error with vista service pack 1 - cannot reboot in safe mode or regular

  tried to download vista sp1 - cannot start in safe mode or regular - enabled more than an hour to download - black screen-a chosen start normally - tried to start - at least 35 min. with the screen - in the suite! oxco1a001d! 28802/95712-{Registry\machine\components\DeriveData} - then tried to start in safe mode - says something was wrong - ran progran details - leaving - help, please4

  Hello

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  and read this:

  This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

  http://support.Microsoft.com/kb/947366

  Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  or repost in the Windows Update forum link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• the upgrade to vista service pack 1

  Please help me in what i am doing this for the first time...

  I plan to upgrade my windows vista Home premium with service pack 1 vista...

  I want to ask this question:

  It will affect my installed software and games to not funclion correctly... IE I had to reinstall after upgradation to service pack 1?

  My data is in 'My Documents' would be removed after the upgrade to sp1?

  http://TechNet.Microsoft.com/en-us/Windows/cc507882.aspx

  Things to know before you download Windows Vista SP1 at the link above.
  Vista SP1 is an upgrade, not a reinstall.
  Programs and data are safe.
  BUT, you should always make backups of data in the event of unforeseen problems.
  See you soon.

  Mick Murphy - Microsoft partner

• Problem with Vista Service pack 2

  Like a fool, I downloaded and installed this service pack.  Now my computer restarts.  I spent 12 hours with the technicians MSFT trying to solve the problem, and I still have the problem.  MSFT says the problem with my DELL hard drive.  DELL said that the hard drive is fine.

  I even reinstalled windows - take 3 hours - and I still have the same problem.  I tried to start in safe mode but after loading the files a few dozens, my computer crashes.   I can't to windows to open.  I can't go to my office.  I can't remove this insidious update.

  I can't completely clean the computer I have important files that I'm going to lose.  MSFT and DELL say I need to have a tech shop and have them remove the disc and save my files.  I want to know who will pay for what is not my fault.

  Help, please

  Hello

  One of the easiest ways to remove your data is put the drive in an external USB enclosure and
  Copy the files to a different drive or just use this as an external drive and install a new in your
  computer. Don't forget that looks like the system has problems and I bet it's the hard drive
  drive interface controller card mother.

  Another real possibilities, is that you have a Rootkit that is causing the problem.

  Good luck.

  Rob - bicycle - Mark Twain said it is good.

• Hang-up system to 76% during the installation of Vista Service Pack 1, 3/3.

  Hello!  I installed Vista SP1 last night and everything seemed to go well, except the system stagnates at 76% this morning at 04:00 (it is now 21:00).  I have the following message is displayed on my screen "installation of the Service Pack: step 3 3-76% complete.".  Do not turn off computer. "What should I do?  Help, please! and thank you!

  Finally, you will need to turn off if she does not finish install.

  http://support.Microsoft.com/kb/971058

  How to reset the Windows Update components?

  You then can he try again, or try a direct download.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=b0c7136d-5ebb-413b-89c9-cb3d06d12674&displaylang=en

  Vista 32-bit SP1

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=874a414b-32b2-41CC-bd8b-d71eda5ec07c&displaylang=en

  Vista SP1 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  But you send messages in the wrong Forum.

  Windows Update Forum:

  It's updated operating system Vista, upgraded installation and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Problems printing MS programs after the installation of Vista Service Pack 2

  After installation of SP2, I can print is more than MS Word. I can print from the web, but when I send something to print from MS Word, it seems to go to the printer, but nothing happens. The printer icon shows in the task bar at the bottom of the screen but no document is displayed as pending and nothing prints. I tried the suggestions I've seen on this forum including to perform a clean boot and run the System File Checker. To solve the problem. I do a lot of printing of the word, so it is a major issue for me. I can't keep running at the public library to print my documents! Aaaaargh.

  You tried the simple expedient of detection/repair or Office Diagnostics, depending on your version of Word.
  Check with the manufacturer of your printer that does not have a printer available update driver?

• Essential system for the Microsoft Windows Vista Service Pack 1 (SP1) updates

  Hi, I want to know if it is applicable to sp2 as well. I don't know why there is not one for sp2. I have an hpg60 laptop and it does not appear on the page drivers.

  It's just an accumulation of the Vista updates. All are included in SP2, so you can forget about it. Simply apply SP2 (as you have done) and start a full MS update and you'll be fine.

• The installation of Vista Service Pack 2 failed

  I had been facing a blue screen often enough lately when I downloaded the SP2. Windows has responded by "Windows can check the bluescreen the next time u log" but he wouldn't do anything.

  After downloading steps 1 and 2 were full. Step 3 0% would come the blue screen and the system will re-start. After that restart againit seems to 0%. So I chose, at the next restart, Mode without failure. Stage 3 took about an hour to reach 100%.

  And then he said that SP2 has been installed. Windows come back back change.

  Now, everything's fine. no problem at all. the system is normal.
  Only problem is that I don't get the option to install SP2 again.
  View these latest updates, he said SP2 failed.

  And I fear the same blue screen appear again if I somehow managed to get their hands on SP2.

  Aid to the blue screen and retrieve SP2.

  Hi Multiloop,
  Thank you for visiting the Microsoft Answers forum.
  I recommend you to perform a restore of the system to a point prior to the installation of SP2.

  * [Make sure that all security software (anti-virus, anti-spyware, firewall, etc.) are temporarelly disabled].
  To access the system restore, click Start and type restore, and then click Restore system from the results.

  Step 2
  ======
  Run the analysis tool
  http://support.Microsoft.com/kb/947821

  Step 3
  ======
  «Copy & paste following command prompt...» I hope this helps.

  "ipconfig/flushdns".
  CD %windir%\System32
  del /s *.chk; *.RIP; *.tmp; ~ *. *
  msiexec/regserver
  Start msiserver sc config = auto
  net stop msiserver
  msiexec /unreg
  msiexec/regserver
  regsvr32 /s msi.dll
  regsvr32 msihnd.dll/s
  net start msiserver
  Regsvr32 c:\windows\system32\wuaueng.dll/s
  net stop wuauserv
  CD /d % windir %
  rmdir /s /q c:\Windows\SoftwareDistribution
  net start wuauserv
  departure of eventlog sc config = auto obj = Localsystem
  net start eventlog
  regsvr32 qmgr.dll/s
  regsvr32 qmgrprxy.dll/s
  SC tisb strands D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)
  regsvr32 c:\windows\system32\wuaueng.dll/s
  SC tisb wuauserv D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)
  start wuauserv sc config = auto obj = Localsystem
  net stop wuauserv
  SC config bits start = DEMAND obj = Localsystem
  net stop bits
  regsvr32 msxml.dll/s
  regsvr32 msxml2.dll Kbps
  regsvr32 msxml3.dll/s
  regsvr32 msxml4.dll /s
  regsvr32 qmgr.dll/s
  regsvr32 qmgrprxy.dll/s
  regsvr32 c:\windows\system32\muweb.dll/s
  regsvr32 /s winhttp.dll
  regsvr32 c:\windows\system32\wuapi.dll/s
  regsvr32 c:\windows\system32\wuaueng.dll/s
  regsvr32 wuaueng1.dll/s
  regsvr32 c:\windows\system32\dllcache\wucltui.dll/s
  regsvr32 c:\windows\system32\wups.dll/s
  regsvr32 wups2.dll/s
  regsvr32 wuweb.dll/s
  net start wuauserv
  net start bits
  sc = auto config cryptsvc start
  net stop cryptsvc
  %WinDir%\System32\Catroot2 CD
  del *. * / f/q/s
  regsvr32 cryptdlg.dll/s
  regsvr32 cryptui.dll/s
  regsvr32 dssenh.dll/s
  regsvr32 gpkcsp.dll/s
  regsvr32 initpki.dll/s
  regsvr32 mssip32.dll/s
  regsvr32 sccbase.dll/s
  regsvr32 softpub.dll/s
  regsvr32 slbcsp.dll/s
  regsvr32 rsaenh.dll/s
  regsvr32 /s winhttp.dll
  regsvr32 wintrust.dll/s
  net start cryptsvc
  cd\
  sc config = ose start request
  net start dare
  regsvr32 qmgr.dll/s
  regsvr32 qmgrprxy.dll/s
  regsvr32 es.dll/s
  CLS
  REM * end *.
  pause
  output

  Step 4
  ======
  Restart the computer

  Step 5
  ======
  Download and install the SP2 stand-alone
  http://TechNet.Microsoft.com/en-us/Windows/bb738089.aspx

  Hope this helps

  Thank you

• Question about the Vista Service Pack

  y at - it an accumliation of updates to windows vista Home premium which can be installed one.

  benjaminsl

  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791/

  You have Service Pack 1 and Service Pack 2, then you have to do the updates after SP2.

  So it's all in an update.

  You can save the service packs where you need them again for resettlement.

  TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Internet Explorer does not work after Vista Service Pack 2 installation with IE 8

  I accepted the installation of Vista Service Pack 2 yesterday with IE 8 upgrade.  Now, I can't get IE 8 or Firefox to connect to the Internet.  I checked my config proxy and it is set to auto detect.  I had Vista analyze my connection with my wireless router and it is no problem. Please notify.

  Uninstall IE8 and see if that helps:

  Click Start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the bad.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner