OPERATING SYSTEM DOES NOT

Similar Questions

• My operating system does not recognize that for Windows XP (KB2813170) security update is already installed

  My operating system does not recognize that for Windows XP (KB2813170) security update is already installed

  Just out of curiosity, why all these steps? Why not simply do step 9?

  1. #9 step alone can not have solved the behaviour & we wanted to be certain that no "leftovers" Norton formed the scr3wing things.

  2. I wanted to do some (possible) that your computer is not infected.

  Welcome & thank you for your comments. Mark one or more of my posts as RESPONSE will officially close your thread.

• Operating system does not stop. It continues to run after I pressed the close button.

  Operating system does not stop automatically.  Computer continues to run after I pressed the close button.

  Hi Solodeseo,

  Try method listed http://support.microsoft.com/kb/308029. Hope this will help.

• "Your operating system does not support the 64-bit version of Silverlight" when you try to install Silverlight on your computer.

  Original title: Silverlight problem

  OK, so something was wrong when I was watching Netflix and I had to uninstall Silverlight. When I tried to reinstall it, it says "your operating system does not support the 64-bit version of Silverlight". I have a 64-bit version of Vista and I use Chrome. Can anyone help? I don't want to lose to Netflix.

  OK, so something was wrong when I was watching Netflix and I had to uninstall Silverlight. When I tried to reinstall it, it says "your operating system does not support the 64-bit version of Silverlight". I have a 64-bit version of Vista and I use Chrome. Can anyone help? I don't want to lose to Netflix.

  Clean installation of silverlight and reinstall...

  How to clean a facility damaged Silverlight and then reinstall Silverlight

  http://support.Microsoft.com/kb/2608523

• I need to install Silverlight, but when I download the installer and run it, it tell me that 'your operating system does not support the 64-bit version of Silverlight.

  Silverlight installation problems

  I need to install Silverlight, but when I download the installer and run it, it tell me that 'your operating system does not support the 64-bit version of Silverlight. I have Vista Ultimate, a 64-bit system.  Help, please.

  Hello

  It's the operating system Vista Installation Forum.

  Microsoft has set up Forums to specifically to questions of Silverlight.

  They should be able to help you there.

  http://forums.Silverlight.NET/

  See you soon.

• inst-08072 operating system does not ipv4 support

  The installation of obiee 11 g, I get error "inst-08072 operating system does not support the ipv4". I changed the hosts file and set a loopback adapter.

  But it still doesn't work. Do you have any supposal for the problem?

  etc/hosts, file;

  resolution of name localhost # is handled within DNS itself.

  : 1 localhost

  127.0.0.1 localhost

  192.168.2.103 server1 localhost

  192.168.2.20 localhost

  Server is 2008R2

• My operating system does not support Lightroom CC can I use Lightroom 4 without having to pay for it?

  My operating system does not support Lightroom CC can I use Lightroom 4 without having to pay for it?

  It is unlikely, unless you manage to find a way to get Lightroom 4 for free.  Adobe does not offer it.

• Is it posible to get an older version of photoshop? because to install photoshop CC he says that my operating system does not support

  Is it posible to get an older version of photoshop? because to install photoshop CC he says that my operating system does not support

  If you use Windows XP / Vista or Mac OS X 10.6.8

  You must install Adobe Application Manager , to help you install CS Photoshop version 6.

  Windows: After installation, creates the shortcut on the desktop.

  http://download.adobe.com/pub/Adobe/creativesuite/CC/Win/ApplicationManager9.0_all.exe

  Mac: After installation, created the launch within the Applications folder icon.

  http://download.Adobe.com/pub/Adobe/creativesuite/CC/Mac/ApplicationManager9.0_all.dmg

• Operating system does not support Microsoft Fix - It

  Try to download the microsoft fix - it. Impossible Solution Center to-said response system does not support. How can I get my system to support?

  Try to download the microsoft fix - it. Impossible Solution Center to-said response system does not support. How can I get my system to support?

  As strange as it sounds, unless you provide the information, we can not say that your system is or what FixIt you would have attempted to download.

  Learn how to ask a question.

  To identify your Windows version, including service pack, right-click on desktop and select Properties.

  Rather than trying to understand on what particular FixIt you were trying to use, explain your problem and include the full text of the error message may be received without paraphrase (not the message about the FixIt is not supported).

• Made a big mistake in trying to get rid of the partitions on the coming Pro 8. Operating system does not load!

  Hello

  First time on this type of forum so I hope that what I write is logical.  So, here.  I have improved my coming 8 Pro for Windows 10 and after the update it told me that I needed to make space on the disk.  I looked and there is not a lot of programs that I have removed looked beyond and found that there are 2 partitions that had almost 6 shows assigned to them which were not used.  I tried to reclaim that space.  I made a copy of recovery on the micro SD and that seems to work very well.  Then I fiddled around until I could remove the 5 + GB partition and reassign it to the primary partition.  The second partition (about 750 MB) I was able to free up, but as it was before the main partition, I wasn't able to retrieve space in the primary partition.  I downloaded a utility recommended to try to move at the end of the main partition so that I could get it back like this.  Everything seemed to work but it stopped crashing and I got a blue screen of Windows saying that "the application or the operating system could not be loaded..." ».  I figured out how to get into the bios to see if I could change the boot sequence, I created a windows 10 bootable USB and after a lot of work finally got the tablet to boot from USB.  At this point, Windows 10 wanted to re - install (which I'm fine with) but the only problem is that the touch screen unresponsive!  I assume that the driver is not loaded on a USB boot.

  Now I am trampled.  I don't really know how to go further.  Is there a way to get the drivers to load from the USB?  Can I send my tablet in a magical place where qualified technicians will be re - build it for me?

  Any assistance or moral support would be greatly appreciated.

  Thank you

  Richard

  Would you go through the process, and when you need to use the touchscreen, join via the microUSB port and an adapter USB OTG, a wired keyboard (and mouse wired, if necessary, via a multiUSB adapter attached to the adapter USB OTG) and then complete the installation of this way?  At this point, you can download the required drivers from the Web page of the Dell product support and win your touch screen feature back.

• Operating system does not load unless the 2nd hard drive is in.

  I have 2 installations of windows 8 (one in each of my 2 hard drives). The hard drive is almost broken, but it seems that if I unplug it I won't get a screen asking me which operating system to load from. I want it so I have 1 hard disk whereas my os works can start. How to do this?

  Looks like all the boot information on the main active hard drive. If this drive is not available, then the other operating system is not available. Reconnect the drive which can boot into Windows 8 and create recovery media that allows you to recover the drive which is not booting:

  create a repair disk:

  http://winsupersite.com/article/Windows8/Windows-8-tip-create-recovery-media-144098

  Boot from the recovery media that you create.

  (a) in the screen install now

  (b) click on repair your computer

• A60-155: operating system does not start.

  I have a TOSHIBA A60-155. When I turn on the laptop it doesn't load the operating system, I have read the manual and apparently it is a self-test failure, I tried selecting all modes start but nothing will work. I have not yet tried any recovery CD the problem started after I pressed the power off because the computer froze. Does anyone have the solution to this problem?

  I would also like to know what the BIOS is and what I need to update? my laptop is around the age of six months.

  Hi Ben,

  First of all, you need to update your BIOS if your laptop is only a few months old.

  Second, the boot sequence for your laptop is a three step process:-

  1. the post OFFICE will verify the functionality of your attached peripheral resources, DVD, disk HARD etc.

  2. the BIOS then load and deal with the allocation of RAM etc and also initialize the functions of the basic system of your laptop.

  3. BIOS bed the Master Boot Record to determine what operating system you have installed will be then load the required system or give you a menu of options which you can choose.

  If you press the ESC key as soon as starts the ignition process, you should see the results of the first two steps (the POST and the initial BIOS load).

  The fact that you see the selection menu with the choice of types of loads (i.e., Safe Mode etc.) suggests that your system is unable to load your operating system from the hard drive. The fact that none of the options work indicates that there is a fundamental problem with your hard drive.

  If you have a bootable CD then I suggest that you try to boot your system from CD (press and hold the F12 key during the first power on sequence and select your CD drive in the list).

  Alternatively you can restore your operating system recovery CD, but it will format your hard drive, which results in the loss of your data.

  HTH

• Serial port under guest operating system does not work

  Running VMWare Workstation 7.1.3 on win 7-64 bit. Guest operating system is win 7 32 AND Windows XP (32 bit). I followed the instructions on connecting to the host serial port. However, there is no access to serial port a guest OS. Serial Port sniffer running on the host shows NO ACTIVITY on the port operating system serial host.

  Even serial device, attached and if running on the host works very well.

  Any ideas?

  Steve

  I doubt that the documentation is correct for what is with VMplayer 3 on Windows TGV serial ports is.
  Read my notes http://faq.sanbarrow.com/index.php?solution_id=1007

  I removed the option of thinprint and reconfigured the serial port in the vmx file attached.

  Turn off the virtual machine and replace the existing by the attached vmx file.
  Then try again

  If it still does not - change
  Serial0.yieldOnMsrRead = "FALSE".
  TO
  Serial0.yieldOnMsrRead = 'true '.

• Adding SCSI - HOST OS card works fine, GUEST operating system does not see the new hardware

  I have a HOST Windows XP Pro SP3 with VMWare v6.5.2 running Windows Server 2003 R2 STD, SP2 as OS GUEST running on any new Dell Precision T3500 Workstation.

  I've closed the COMMENTS and then HOST. Installed an Adeptec SCSI 39160 card in the PC. The card is a 64-bit and is installed in a PCI 32-bit slot. (It is backwards compatible with 32 - bit)

  Powered on PC. Install the drivers of Adeptec on the HOST. Works fine and I can see the card under Windows XP. Rebooted and everything is always OKm POST shows the installed card and search devices. I have no device attached at this point.

  GUEST operating system has started and it does not automatically detect the card. Tried to run the Add Hardware Wizard and same result. Tried to use VMWare to install the new Hard ware with no result.

  Can tell you how I can get the OS TO see / use the new SCSI card?

  golden rule:

  old guest will love the buslogic controller

  new comments will love the lsi-logic controller

  It depends on your guest

  ___________________________________

  VMX-settings- VMware-liveCD - VM-infirmary

• Satellite U840W - disc cannot be displayed in disk part operating system does not start

  Yesterday I tried to boot my laptop Toshiba Satellite U840W (PSU5XA-001006) and it came with no bootable device - please reboot

  When I try to view the disc in the part of the disk, it cannot see that the USB key that I use to try to reinstall Win 8. In the setup of windows 8 I can't display the installation discs. I can't run the recovery because I don't have a recovery disk and repair does not work as it says that the disk is locked.

  Don't know what I can do now, would be grateful for all those who had suggestions.

  Of course, there is a problem with the internal HARD drive.
  If it is not listed in the BIOS (BIOS first page) then the HARD drive died and that's why the system cannot be found.

  I guess that in this case, there is only one solution: HARD drive needs to be replaced and the system must be installed again.

• Qosmio G10: The operating system does not work corectly

  Hello. My problem is that my windows xp does not work corectly, mousecursor, sounds, videos, games, programs, everything turns into a ' stop and go '. as the cpu slows all the 1-2 seconds. I reinstalled windows now 4 times and any document in the format hd´s.

  Don t know what to do...

  and a second question... maybe this could be the answer for the first ;-)

  in my hardware-registration of my system windows are two elements, for I can't find a driver.

  -PCI-Device
  -videocontroller fuer multimedia (German ;-))
  in English systems, maybe it's the multimedia "media control device" or "videocontroller" or something...

  does anyone know if I can get the drivers, because they´re not listed on the toshiba site. and my backup-disk system was stolen. (sounds strange... I know :-))

  OK, please give me some advice, if you have any ideas!

  THX a lot, patrick

  Hello Patrick

  First of all, it will be interesting to know if the unit is pre-installed by recovery media. The installation of Qosmio is quite complicated, and I recommend you use the restore CD.

  In this way it is not possible to give a precise answer because I don't know what kind of things is installed on your device. I guess in your case, some application (such as the virus scan) runs in the background and your HARD drive can be pointed out.

  If your recovery DVDs is stolen, you can order a partner of service authorized in your country.

  Good bye