Qosmio G10: The operating system does not work corectly

Similar Questions

• operating system does not work

  My laptop runs bt I dnt know why it is said that installing the operating system.

  Dear customer,

  Welcome to the Support Forum HP and we are happy to help you

  According to the message that you posted, I suspect that this could be due to the recent changes are applicable

  I'd like to request you to perform the procedure to solve the problem below:

  Step 01. Turn off the computer

  Step 02. Turn on the PC and keep pressing the F8 key

  Step 03. Select "Safe Mode" in the early startup Option list

  Note: Wait until you get to the Windows desktop

  Step 05. Please remove unwanted startup items and uninstall unwanted applications

  Step 06. Please reboot / restart your PC normally

  Note: Incase if these steps don't work you can continue to troubleshoot the issue once again

  Step 01. Turn off the computer

  Step 02. Turn on the PC and keep pressing the F8 key

  Step 03. Select "Last known good configuration" in the list of the early start Option

  Note: Wait until you get to the Windows desktop

  Step 04. Please remove unwanted startup items and uninstall unwanted applications

  Step 05. Please reboot / restart your PC normally

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP

• HP Pavilion dv7-4065dx operating system does not work, drive hard main self-test results 303.

  How repairing when HP Pavilion dv7-4065dx will not run the operating system, disk hard main self-test result 303.

  Hello

  303 error seems to indicate that the drive is defective and must be replaced - it is also compatible with the problem you describe.

  If your laptop is still under warranty, contact HP and arrange for the disc replaced.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

  Kind regards

  DP - K

• Serial port under guest operating system does not work

  Running VMWare Workstation 7.1.3 on win 7-64 bit. Guest operating system is win 7 32 AND Windows XP (32 bit). I followed the instructions on connecting to the host serial port. However, there is no access to serial port a guest OS. Serial Port sniffer running on the host shows NO ACTIVITY on the port operating system serial host.

  Even serial device, attached and if running on the host works very well.

  Any ideas?

  Steve

  I doubt that the documentation is correct for what is with VMplayer 3 on Windows TGV serial ports is.
  Read my notes http://faq.sanbarrow.com/index.php?solution_id=1007

  I removed the option of thinprint and reconfigured the serial port in the vmx file attached.

  Turn off the virtual machine and replace the existing by the attached vmx file.
  Then try again

  If it still does not - change
  Serial0.yieldOnMsrRead = "FALSE".
  TO
  Serial0.yieldOnMsrRead = 'true '.

• Help! My operating system does not work with disc

  When I installed the DIGITAL SOLUTION DISK for my new EOS 7 d mark ii a window pops up stating:

  This software is not compatible with your operating system

  I use an old dell works well with XP, is there a way to get around this, I already have photo professional, eos utility etc. of my rebel...

  ANY help would be greatly appreciated

  Having been forced to upgrade too because I need to process RAW images from the 2 7 using Photoshop, I can tell my updates went well. I bought Win 8.1 & done a clean install on a new hard drive & waited to win 10 out & from my old programs would continue to operate. 10 once was readily available that I made an another clean install on another hard drive as an installation & nine 64-bit (added 16 gigabytes of memory also) & things was great when working in Photoshop, BUT for all those who 7 2 treatment check CR2 what device profile is best. By default, it chooses an Adobe profile that works very well with my other camera files but Standard camera looks better with 7 2 files.

  (My computer has provisions for 5 internal hard drives & I 5) I can easily re boot for XP or Win 8.1 if I need to use one of my old programs, but so far, I've been running Win 10 on my office & XP on my laptop.

• NIC Vista guest operating system does not work

  I am running VMware Workstation 5.5.5 build-56455, on a Win XP Pro host system.

  I just installed Windows Vista business as a guest operating system, but I can't get the network to work.

  How to make this work?

  The 'real' my Dell workstation NIC is a Broadcom NetXtreme 57xx Gigabit Controller, if it is relevant at all.

  Concerning

  MazH

  It seems that the virtual NETWORK adapter is not installed on the client, otherwise, you would see an adapter in the comments "ipconfig" with an APIPA address.

  Install the VMware tools in the comments (you always do). It contains the correctdrivers for the virtual card.

  AWo

  VCP / VMware vEXPERT 2009

• Problems of migration to a new system - guest operating system does not work

  I've been running VMware Player on a Win 7 64 bit laptop.  I have 3 computers of customers, which is 32-bit Win XP.  I've just set up a new machine, also running Win 7 64 bit, but a processor more recent (i7) and more memory (32 GB).  I use the same version of the player on both machines (4.0.1 build-528992).  I copied all the files from the laptop to the new office.  Ubuntu and Mac OS X Lion customers will work perfectly.  When I try to run the client Win XP, I get the following message:

  File not found: Windows XP Mode base.vhd

  This file is required to power on this virtual machine.  If this file has been moved, please provide its new location.

  I don't have a VHD file, I have a VMDK file (again, which works fine on the laptop).  I tried turn off the virtual machine on the laptop, then copying the files to the desktop, and I also tried to suspend, both with the same results.  When I try to change the settings of the virtual machine on the new desktop, clicking on the adjustment of the hard drive (IDE) causes the following message:

  The parent of this virtual disk could not be opened.

  The VMDK file is 19.2 GB.  I've searched and searched trying to find why this could happen and found nothing.  The XP machine has a good bit of responsible software that I use on a daily basis.  Last resort, I could create a virtual XP machine on the new desktop and reload all the software, but strongly prefer not to do it - it would be a tedious task.

  Does anyone have any ideas as to what could happen and how to fix it?  I copied the files several times to ensure that it is not something simple like a damaged copy.  I'm puzzled.  The XP machine was NOT initially a WIndows XP Mode machine, even if the message indicates that VMware Player seems to think it is (and, again, it works fine on the laptop).  The name of the virtual machine is "WIndows XP Mode" - maybe that's why he complains.  Is it possible to rename all of the files and references to files to resolve this problem?

  Any help would be greatly appreciated!

  Welcome to the community,

  We can be able to know if the virtual machine is one any "Windows XP Mode" VM or not to take a look at VMware.log virtual machine. Please attach the last file vmware.log file XP VM (that of the laptop), as well as the PC to your next post.

  André

• [Solved] pc with xp home edition as the operating system does not start after installation of SP2 via automatic updates

  Hello everyone. After formatting my hard drive I reinstalled windows xp edition sp1 family and then installed the latest version of windows update agent. I have the auto update set to download the updates automatically and notify me when they are ready to be installed. Initially, he found 3 updates that I installed and rebooted. He concluded 58 updates. Again, I've installed and restarted. After that, we found ServicePack 2, I installed as well. But after the reboot, the pc does not start. What I get is the windows xp logo which discoloures after a few seconds and I don't see a bar moving from left to right. I left it like that for 3 hours, but nothing has changed. Also, it does not start in safe mode. I get a screen with red and green vertical lines in this case. Anyone know what's the problem? I'd appreciate any help. Thank you.

  I was finally able to solve this problem. That's what I did. I reinstalled windows xp home and followed the same path (but his definition of the automatic updates notify me before downloading or installing updates) until the automatic updates found in the new service pack 2. This time that I did not choose to download it. Instead I downloaded from here http://www.microsoft.com/en-us/download/details.aspx?id=28 and then started in safe mode and installed. I don't know one that makes the difference but service pack 2 has been successfully installed this time and tha pc was able to start after installation. Before that, I also downloaded and installed the latest versions of 2 drivers through drivermax. I mention this in the case where he has also made a difference. After the service pack 2 installation and restart, automatic updates will be found a few others brought up-to-date, but after installation and reboot, it found no others. I had to visit update windows Internet explore and search for updates it and managed to find other updates and finally SP3.

• My system does not work properly. I want to change it. Can I transfer my Windows 7 license on the new system?

  HI I WANT TO CHANGE MY SYSTEM AS MY SYSTEM DOES NOT WORK THERE ARE A FEW PROBLEMS WITH THE EQUIPMENT INSIDE SO I WANT TO CHANGE IT AND I WANT TO USE MY LICENSE WINDOWS 7 ON MY NEW SYSTEM CAN DO AND HOW? I HAVE A COPY RETAIL

  First of all, make sure that Windows 7 is no longer in use on the current computer.

  Click Start, type: CMD
  Right-click on CMD
  Click on run as administrator
  At the command prompt, type: slmgr.vbs - upk

  Press enter, this will uninstall the product key of the computer and to the evaluation mode, you are now free to use it on another computer. If you experience problems, try to activate by phone:
  Activate Windows 7 manually:
  1. click on start and in the search for box type: slui.exe 4

  2. press enter on your keyboard

  3. Select your country.
  4. Select the telephone activation option and brace yourself for a real person.

  The mode currently of the installation process, you will need to be activated or it will go into reduced functional mode. You have the option to install another version or edition of Windows or get a product key for it. Alternatively, you can put the system as follows:

  To format drive:

  1. Insert the DVD of Windows 7
  2. restart your computer
  3. When asked if you want to boot from your DVD player, do it.
  4. Select your language, click Next.
  5. click on "repair your computer".
  6. Select the operating system you want to repair.

  7. click on the command line

  8. at the command prompt, type: FORMAT C: /.

  Press enter on your keyboard

  Type y for Yes

  Press enter

  Please wait while the drive is formatted.

  Type exit to close the command prompt, and then click farm to shut down the computer.

• Operating system does not stop. It continues to run after I pressed the close button.

  Operating system does not stop automatically.  Computer continues to run after I pressed the close button.

  Hi Solodeseo,

  Try method listed http://support.microsoft.com/kb/308029. Hope this will help.

• "Your operating system does not support the 64-bit version of Silverlight" when you try to install Silverlight on your computer.

  Original title: Silverlight problem

  OK, so something was wrong when I was watching Netflix and I had to uninstall Silverlight. When I tried to reinstall it, it says "your operating system does not support the 64-bit version of Silverlight". I have a 64-bit version of Vista and I use Chrome. Can anyone help? I don't want to lose to Netflix.

  OK, so something was wrong when I was watching Netflix and I had to uninstall Silverlight. When I tried to reinstall it, it says "your operating system does not support the 64-bit version of Silverlight". I have a 64-bit version of Vista and I use Chrome. Can anyone help? I don't want to lose to Netflix.

  Clean installation of silverlight and reinstall...

  How to clean a facility damaged Silverlight and then reinstall Silverlight

  http://support.Microsoft.com/kb/2608523

• I need to install Silverlight, but when I download the installer and run it, it tell me that 'your operating system does not support the 64-bit version of Silverlight.

  Silverlight installation problems

  I need to install Silverlight, but when I download the installer and run it, it tell me that 'your operating system does not support the 64-bit version of Silverlight. I have Vista Ultimate, a 64-bit system.  Help, please.

  Hello

  It's the operating system Vista Installation Forum.

  Microsoft has set up Forums to specifically to questions of Silverlight.

  They should be able to help you there.

  http://forums.Silverlight.NET/

  See you soon.

• Made a big mistake in trying to get rid of the partitions on the coming Pro 8. Operating system does not load!

  Hello

  First time on this type of forum so I hope that what I write is logical.  So, here.  I have improved my coming 8 Pro for Windows 10 and after the update it told me that I needed to make space on the disk.  I looked and there is not a lot of programs that I have removed looked beyond and found that there are 2 partitions that had almost 6 shows assigned to them which were not used.  I tried to reclaim that space.  I made a copy of recovery on the micro SD and that seems to work very well.  Then I fiddled around until I could remove the 5 + GB partition and reassign it to the primary partition.  The second partition (about 750 MB) I was able to free up, but as it was before the main partition, I wasn't able to retrieve space in the primary partition.  I downloaded a utility recommended to try to move at the end of the main partition so that I could get it back like this.  Everything seemed to work but it stopped crashing and I got a blue screen of Windows saying that "the application or the operating system could not be loaded..." ».  I figured out how to get into the bios to see if I could change the boot sequence, I created a windows 10 bootable USB and after a lot of work finally got the tablet to boot from USB.  At this point, Windows 10 wanted to re - install (which I'm fine with) but the only problem is that the touch screen unresponsive!  I assume that the driver is not loaded on a USB boot.

  Now I am trampled.  I don't really know how to go further.  Is there a way to get the drivers to load from the USB?  Can I send my tablet in a magical place where qualified technicians will be re - build it for me?

  Any assistance or moral support would be greatly appreciated.

  Thank you

  Richard

  Would you go through the process, and when you need to use the touchscreen, join via the microUSB port and an adapter USB OTG, a wired keyboard (and mouse wired, if necessary, via a multiUSB adapter attached to the adapter USB OTG) and then complete the installation of this way?  At this point, you can download the required drivers from the Web page of the Dell product support and win your touch screen feature back.

• \\HOME-server is not accessible. A device attached to the system does not work.

  I use Windows 7 Professional. My network server is WHS V1.

  I have a shortcut on the desktop to \\HOME-SERVER on my W7 machine.
  All of a sudden it has stopped working.
  I get the message
  \\HOME-server is not accessible. You might not...
  A device attached to the system does not work.
  
  
  I searched in the WHS forums, a post suggested http://www.howtonetworking.com/Troubleshooting/notaccessibale0.htm
  I found that the command line net view \\HOME-SEVER gives (and by typing this in an address bar of the Explorer does not work)
  31 system error has occurred.
  A device attached to the system does not work.

  And this net view \\HOME-SERVER\Music gives (but in typing this in a browser address bar works!)
  53 system error has occurred.
  The network path was not found.
  However, net view 192.168.1.99 (my server address) correctly list the share on the server names (and entering \\192.168.1.99 in Explorer address bar works).
  I did a system restore until the problem occurred first to rule out any changes to the system.
  The problem occurred again.
  This means that my Sync Center shows none of my synchronization partnerships.
  Can anyone suggest the setting or service that must be corrected to solve system error 31 problem?
  TIA
  Hello
   
  The question you have posted is related to Windows home server and would be better suited in the Windows Home Server Forum.
  Please visit the below mentioned link to find a community that will provide the support that you have requested.
  http://social.Microsoft.com/forums/en-us/category/WindowsHomeServer/
   
   
  Thank you

• Urgent - the sound recorder does NOT work after getting the window system 7 (64-bit)

  I have a problem with the sound recorder. After that I got the system with Windows 7 (64-bit), the sound recorder does not work. It's very urgent because I need to procticing my English pronunciation and the test day is coming.

  Please would you give me help? I really appreciate!

  Thank you very much.

  Eleanor

  A prompt by right clicking and select "Run as Administrator"
  and then at the command prompt, type: chkdsk /f r, then press the Enter key.

  If you are asked to plan the volumn to check the next time that the system restarts,
  Enter: y

  If you know the manufacturing of your hard drive you can also download their diagnostic software.

  Another use: SpeedFan has an online health analysis function
  (SMART tab) for hard drives. It will show how your disks
  compared with other discs of the same brand and model.
  http://www.almico.com/SpeedFan.php

  ========================================================================

  Run the SFC/scannow command. This will check and repair if necessary all of the critical Windows system files.

  Click on start / all programs/accessories then
  Right-click on the command prompt option and select "Run as Administrator".
  (or "Safe Mode" open a command prompt)
  At the command prompt, enter: SFC/scannow

  Windows 7 - order SCANNOW SFC - System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  How to analyze the entries in log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista:
  http://support.Microsoft.com/kb/928228

  J W Stuart: http://www.pagestart.com