operating system will not install on c

Similar Questions

• KB978637 systems will not install.

  Update for Windows 7 for x 64-based systems KB978637 will not be installed.  Error code 80070057.  Have tried and failed to set up since 30 March

  80070057 - ERROR_INVALID_PARAMENTER.  Third party service that is running in the computer creates the problem.  Please do a clean boot, and then install the updates.

  http://support.Microsoft.com/kb/947821

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  TaurArian [MVP] 2005-2010 - Update Services

• Why my Vista operating system will not support a lexmark Printer series s600?

  I spent the last two hours trying to set up my 'Wireless' Lexmark S605 so I can print from my laptop 32 bit Windows Vista. I followed the instructions given in the installation process and used the installation cd, but was still unable to print from my laptop. Then, I downloaded the software and complete drivers (which was the last updated February 2013) from the manufacturer's website. The first error message that I got was one of the pilots be found / had failed to install. The second error message I got was:

  "Your operating system cannot support a lexmark s600 series printer. Installation cannot continue. »

  What can I do to solve this problem, if anything? (in addition to buying a new laptop which doesn't have Vista)

  Hello

  Here are a few troubleshooting steps that you can try to solve this problem.

  
  We will try to set up the printer using the tool of Lexmark.
  All the drivers and software for Setup, configuration, and usage of your device with 32-bit Windows.

  http://support.Lexmark.com/index?docLocale=en_US&page=content&ID=DR15867&locale=en&UserLocale=en_CA

  How to reconfigure your inkjet printer to join Your Wireless Network by using the http://support.lexmark.com/index?page=content&id=HO3161&locale=EN&userlocale=EN_CA wireless configuration utility

  If the problem persists, I suggest you contact Lexmark support using this link

  http://support.Lexmark.com/share/index_ca_en.html

  Thank you

• My system will not install Java, when I try to install ISC is already installed, but it is not, how can I fix this so I can install Java?

  I uninstalled Java on my system to use Revo uninstaller, I then tried to install Java and my ISC system is already installed, but when I check for Java on my system using the Java site it know there is a problem with Java on your system. What should I do to reinstall Java on my system?

  Hi Catherine,

  See the following articles and if you can delete Java completely from the computer.

  How to uninstall Java on my Windows computer?

  After uninstalling Java, how to remove its entry in Add/Remove programs?

  Try to install the latest version now and see if he moved very well.

  Download the free Java software

• Operating system will not start and run - error codes 2000-142, 0F00:075 D, 41166486 uncorectable data error media wrtie block protect error code 0F00-0244

  I have dell 1525 top of the tower and OS will not run. Error code 2000-142, status bite 79, error code 0F00:075 D and Bios memory hard drive, SATA drive read your 41166486 data uncorectable media wrtie error block protect error code 0F00-0244then kept showing up on several more blocks.  Can I fix?  Joe

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Try to start the computer in safe mode and check if you can start the computer:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:
  Try to perform the verification and startup repair if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  It will be useful.

• System will not install the update for Microsoft Silverlight (KB2526954) how can I say no to this update so stop it trying to install it?

  I keep gettinError code 670. I tried to find the disc problem, but can't work around that. I want to stop trying to install this update of the system.

  Hi DeliaYeager,
   
  -Are the other updates, proceed with the installation without any problem?
   
  Try to download and install the latest version of Silverlight and check if this may help.
   
  For the latest version of Silverlight, visit the following link:
  Download Microsoft Silverlight
   
  For more information on this update, see:
  Description of the update for Microsoft Silverlight: 19 April 2011
  You can also post your request in the Silverlight Forums for assistance.
  Installation and configuration

• I am running Vista Home Premium (although upgrade automatic is activated, the system will not install SP1.) Support Ms called and they asked me reinstall the OS. I did and the same problem.) I have Toshiba Satellite laptop. My system does not open the

  How can I open files to .phtml?

  You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the correct help it.

  See you soon. Mick Murphy - Microsoft partner

• Win 7 will not install my old version of still

  I have a new computer with Windows 7 as operating system. On my old Win Xp computer, I used Encore 1.7 and it worked fine. Now my new system will not install my old version yet. What are my options? I still like I'm used to it.

  Thank you

  Phil Taylor in Montana

  It would probably never work. Architecture of Windows Media has fundamentally changed and the CoDecs does not, even if you somehow have it installed, which probably won't be possible. And unfortunately still is not sold separately more, so you should have a shape any new suite or Premiere Pro where it is included. In those circumstances, the best cost effective way would get the creative cloud.

  Mylenium

• My computer has been infected recently with Sirefef (AB and W variants). How will I know if I do a backup/clean install of the operating system or not?

  As says the question: my computer has been infected recently with Sirefef (AB and W variants).  How will I know if I do a backup/clean install of the operating system or not?

  I'm running a full system scan in ESM right now, and it has detected multiple instances of sirefef.   I have remove as they pop up, but I'm afraid that when I run another scan they all will always be there.  Is there a way to know if MSE is actually remove them and he cleaning?  If not, should I do a back up and reinstall the OS?

  Thank you.  I can choose to try this, however, I would like an answer to my other questions first.

  Sirefef is a rootkit and yes he can hide in your system.  This is why it has been suggested that you may need to reformat/reinstall.  In fact, it's the only way to eliminate malware.  Multiple scans with several scanners and no conclusion malware probably indicate he disappeared, but the key word is "probably".  Malwarebytes is good and what he finds now may be traces of the infection, but what he finds perhaps not active more - it is always good to run the scans so.

  What spare drive did you run?  What scanners did you use?  See again you and follow the guide "Malwaretips"?

  For the firewall problem, you can try the following Microsoft Fixit.

  Diagnose and automatically fix problems of Windows Firewall service

  http://support.Microsoft.com/mats/windows_firewall_diagnostic/en-us

  One of the users of the Forum answers maintains that a great guide on information security is important for understanding the removal of malicious software.  See the following compliments of Brian M - for suggestions on how to solve your problem: http://www.selectrealsecurity.com/malware-removal-guide/#after see: after the removal process and solve the problems of Post disinfection

  Uninstall/reinstall of MSE is how?  All the problems?  Have you tested MSE with eicar to be sure it's working?

  Assume that you have not had an opportunity to review the MSE Installation Checklist or you would have noted that MSE and Windows Defender cannot be used on the same computer.  So if WD works in fact it means MSE has been disabled/not not work correctly or not installed.

  See the next WD re: Windows Defender and Microsoft Security Essentials

  Good luck...

• HP Pavilion 550-055na: new disk will not install the new operating system

  Hello

  I bought a new HP Pavilion 550 - 055na with Windows 8 a month or two ago but want to use Windows 7. However, I decided that I will keep the hard, the PC came with, and have the option of Windows 8 in future if I want. So, I'm installing Windows 7 on a new hard drive.

  My problem is that the new copy of Windows 7 will not install on my new hard drive.  I get:

  Violation of secure boot

  Invalid signature detected. See the policy in the configuration of secure boot

  Then me to a black screen after I pressed Enter/Ok, who said the following.

  Check the presence of the media...

  Media present...

  On IPv4 PXE boot.

  If I press F12 on power on, I get a blue box asking me to select a boot device. The only options are:

  Realtek PCIe GBE Family Controller IPv4
  

  Realtek PCIe GBE Family Controller IPv6

  and the output by using the arrow keys

  How to change the secure boot strategy?  If I do, it means that I can install my 7 can I on my new hard drive? Also, providing that I do, I always will be able to use my Windows 8 OS drive after changing the secure boot strategy?

  Any help would be appreciated to greately.

  Sincere greetings

  DJ

  Hello:

  You have to enable the legacy mode and disable start-up secured in the BIOS to be able to install and run W7.

  Please see this link to find out where these settings... this references adding a video card, but this is how you change the settings no matter why you need to change.

  http://support.HP.com/us-en/document/c03653200/

• My operating system does not recognize that for Windows XP (KB2813170) security update is already installed

  My operating system does not recognize that for Windows XP (KB2813170) security update is already installed

  Just out of curiosity, why all these steps? Why not simply do step 9?

  1. #9 step alone can not have solved the behaviour & we wanted to be certain that no "leftovers" Norton formed the scr3wing things.

  2. I wanted to do some (possible) that your computer is not infected.

  Welcome & thank you for your comments. Mark one or more of my posts as RESPONSE will officially close your thread.

• err3 Err1 on startup. system will not f8 or f11 and says no operating system found? What the? A windows vista family premium, a second ago...?

  I hope someone can help.  I can't fly on the f11 or f8 function keys. I have tried bios updated default did not work.  Says Bios and video are shawdowed.  No TPM or TPM has problem.  Fixed Disk0 and fixed Disk1 - F.2a Phoenix BIOS 4.0 Release 6.1 version.  So can't do the system restore? Where is my operating system?  I lost everything in C and D drives?  System will not start or start at all.  Do I have to re - install the OS Windows Wista?  Work about to go back and fix?

  Hello SteveO_1968,

  To run the Bootrec.exe tool, you must start Windows RE. To do this, follow these steps:

  1. Put the Windows Vista installation disc in the disc drive, and then start the computer.
  2. Press a key when you are prompted.
  3. Select a language, a time, a currency, a keyboard or an input method, and then click Next.
  4. Click repair your computer.
  5. Click the operating system you want to repair, and then click Next.
  6. In the System Recovery Options dialog box, click command prompt.
  7. Type Bootrec.exe, and then press ENTER.

  Note To start the computer from the Windows Vista DVD, the computer must be configured to start from the DVD drive. For more information on the configuration of the computer to start from the DVD drive, see the documentation provided with your computer or contact the computer manufacturer.

  Bootrec.exe options

  The Bootrec.exe tool supports the following options. Use the option that suits your situation.

  Note If rebuilding the BCD does not resolve the startup problem, you can export and delete the BCD, and then run this option again. In doing so, you ensure that the BCD is completely rebuilt. To do this, type the following commands at the command prompt Windows RE:

  • bcdedit/export C:\BCD_Backup
  • c:
  • Boot CD
  • BCD attrib s h - r
  • Ren c:\boot\bcd BCD.old
  • Bootrec /RebuildBcd

  / FixMbr

  The /FixMbr option writes a MBR compatible Windows Vista on the system partition. This option does not overwrite the existing partition table. Use this option when you need to solve problems of corruption of MBR, or when you need to remove the non-standard code from the MBR.

  / FixBoot

  The /FixBoot option writes a new boot sector on the system partition by using a boot sector that is compatible with Windows Vista. Use this option if one of the following conditions is met:

  • The boot sector has been replaced by a non-standard Windows Vista boot sector.
  • The boot sector is damaged.
  • An earlier Windows operating system has been installed after the installation of Windows Vista. In this scenario, the computer starts by using Windows NT Loader (NTLDR) instead of Windows Boot Manager (Bootmgr.exe).

  / ScanOs

  The /ScanOs option scans all disks for installations that are compatible with Windows Vista. In addition, this option displays the entries that are currently not in the BCD store. Use this option when there are installations of Windows Vista which is not in the Boot Manager menu.

  / RebuildBcd

  The /RebuildBcd option scans all disks for installations that are compatible with Windows Vista. In addition, this option allows you to select the facilities you want to add to the BCD store. Use this option when you need to completely rebuild the BCD.

  "In the end the love you take is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• El Capitan will not install. Error message "file system check or repair a failure." Had to reboot with the snow leopard disc.  Any suggestion what happens?

  Trying to upgrade Snow Leopard to El Capitan.  El Capitan will not install.  Get the error message "failed to file system verify or repair.  Quit the installer to restart your computer and try again. "After Setup could not restart without using the Snow Leopard disc (then to download all updates for Snow Leopard).  I tried reinstall and same results.  (in fact made three times)  I'm back to Snow Leopard 10.6.8... Any ideas what is happening.

  Dealing with the corrupt downloaded in OS X

  Dealing with the corrupt downloaded on OS X (2)

  Download Mavericks cannot be verified also applies to Yosemite.

• I need to install Silverlight, but when I download the installer and run it, it tell me that 'your operating system does not support the 64-bit version of Silverlight.

  Silverlight installation problems

  I need to install Silverlight, but when I download the installer and run it, it tell me that 'your operating system does not support the 64-bit version of Silverlight. I have Vista Ultimate, a 64-bit system.  Help, please.

  Hello

  It's the operating system Vista Installation Forum.

  Microsoft has set up Forums to specifically to questions of Silverlight.

  They should be able to help you there.

  http://forums.Silverlight.NET/

  See you soon.

• Is it posible to get an older version of photoshop? because to install photoshop CC he says that my operating system does not support

  Is it posible to get an older version of photoshop? because to install photoshop CC he says that my operating system does not support

  If you use Windows XP / Vista or Mac OS X 10.6.8

  You must install Adobe Application Manager , to help you install CS Photoshop version 6.

  Windows: After installation, creates the shortcut on the desktop.

  http://download.adobe.com/pub/Adobe/creativesuite/CC/Win/ApplicationManager9.0_all.exe

  Mac: After installation, created the launch within the Applications folder icon.

  http://download.Adobe.com/pub/Adobe/creativesuite/CC/Mac/ApplicationManager9.0_all.dmg