Operating system (XP) does not "see" CD player

Similar Questions

• Operating system authentication does not not in SQL Developer 4.0.1.14

  I just tried to upgrade from the 4.0.0.12 version of the a 4.0.1.14 new and that doing so broke the OS authentication. I checked the settings and 'use Oracle Client' and 'use driver OIC/thickness' are both enabled, the correct paths.

  Launch of the previous version instead, the exact same connection works fine.

  I use the 11 GR 2 11.2.0.3 x 86 Windows 7 client, in a field. Two versions of the SQL Developer seem to be running in x 86 mode, so they should be able to use the Oracle client.

  I managed to make it work. It turned out that when I left my settings to import from the previous version, it does not seem that is imported correctly. It showed as active for the pilot of the OIC, but it was not in reality.

  So I had to disable (and restart), then turn it back on (and restart). After that, it worked fine.

• Why Apple cannot design an operating system that does not bother me when I'm trying to screen recording?

  It's always something that ends up screwing up a screen record on El Capitan. I'm sure I have notifications turned off yet I always get trifles which appear as the software updates for stuff like Java. Java is one of the most annoying things on a Mac. Where is the option for me to tell him to stop to remember to update Java? Screw the screen recordings. I'm sure that other applications need this annoying thing. What should I do to make sure that the application doesn't bother me when I'm registration form?

  For Java, you can go to the system preferences-> Java, then click on update and uncheck "Automatically check updates".

• I can't access my external hard drive with windows 7. How can I get my music out of her files? My pc with xp operating system can access it without problem. but my new pc with windows 7 does not see the hard drive.

  I bought a new pc to replace my old hp 14 months as the motherboard fried in. I bought a case of disk external hard to rocketfish to put the hard drive of my Windows 7 pc in. burned does not see the hard drive. my old pc with xp can access all the items on the external hard drive.

  Check that the drive appears in Device Manager.

  If so, go to disk management and assign a drive letter.

• system does not see the hard drives as P6000 Windows 7 Pro 64-bit

  PC is a little more than a year. About 2 months after installation disk c crashed. Replaced HP drive.

  Customer said that she had problems starting and kept restarting. He ran chkdsk and hooked up to 36%

  Now the system does not see the drive, but he sees no RAM, etc.

  Anyone know what causes this?

  Can what information I give to help troubleshooting?

  Thank you!

  Hello:

  Try resetting the CMOS.

  If this does not work, I would say that the drive controller in the motherboard is dead.

  Clearing CMOS

• System Administration > operations > scheduled backups does not appear in ACS 5.0.0.21

  Hello!

  I want to do the backup schedule. According to the user's guide:

  You can create a backup scheduled for the primary instance. To create, reproduce or modify a regular
  backup:
  Step 1 Choose System Administration > operations > at the request of the backups.

  But the Administration of the system > operations > scheduled backups does not appear in ACS 5.0.0.21.

  How can I save?

  Hi Alexander,.

  Could you please confirm which link you found these instructions?

  It seems that these are the instructions of the ACS 5.1 user's guide, but we do not have a similar option on ACS 5.0.

  Kind regards

  Fede

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• Firefox does not open or does not (see/questions/964132)

  was Ok until recently

  Please include more information, such as your operating system (Windows?) and the version, more exactly what is happening when you try to start Firefox. The information provided in a recent Firefox crash report, if any, can also help. See Firefox plant - troubleshoot and prevent assistance fixing crashes under help in setting this crash and post any crash report IDs recently (they start with bp - )

  The title of your question, says "Firefox does not open or does not (see/questions/964132)" I have reviewed this issue and it was launched by another user of Firefox. /questions/964132? page = 2 # 477049 answer has a number of suggestions if Firefox does not start. Which have you tried?

  To see other possible solutions

  • Troubleshoot and diagnose problems in Firefox
  • http://KB.mozillazine.org/Browser_will_not_start_up
  • / issues/958850 Firefox does not open after a reboot

  Note: A "clean and reinstall" was one of the suggestions/issues/964132. This means remove the Firefox application and then files by reinstalling Firefox since a new download, as explained at the stage of "Reinstall Firefox" in troubleshoot and diagnose problems in Firefox. So that allows you to start Firefox, but if the problem comes back after the computer restarts, you should make another "clean reinstall" and then resolve your plugins by disabling all, as suggested by the troubleshoot and diagnose problems of Firefox article.

• Satellite 1415 does not see HARD drive

  I just finished my old 30g HD to a 160g via a cable usb/ide on my Satellite 1415 cloning/adaptation.

  I've used Norton Ghost who said using the copy MBR 'not' option, I have to format the new drive. It took me over six hours to do due to overheating closed the first period which forced me to do it again.

  Now with the new full disk, I installed in the machine and starts, received a message "NTLDR is missing" on the first try. After going in (WinXP) disk management I noticed that the new drive was now three scores, two the same size that the old hard drive and the last not allocated. I looked at the files in the first partition and found that I do not need so I deleted the files and the partition. The remaining active partition has all the Po files, that I need so I have it assigned a drive letter.

  Now to start with the new drive I get missing operating system message. I ve changed the boot order and linked to the boot the ghost CD but had no luck with either. Of course the machine does not see the disk, so my question is how I can get to see the new drive letter to start when it seems now that for a C:\ drive?

  The only option I see in the BIOS is boot order change. Thank you

  Hello

  To better understand:
  The ability of the entire HARD drive is recognized properly?

  To be honest, the whole story is a bit confusing for me. I use Norton Ghost with WXP too and I know that you can create your own recovery image and burn on CD or DVD. This medium, that you can use to install an operating system.

  You can also save files to recovery on the second partition and then copy to external HARD disk.

  With the new HARD drive using Microsoft facilities CD and install WXP. Create own partitions on the new HARD drive and all ghost copies files to the second partition (new HARD drive). You may not install all driver and tools but install Ghost on this OS fresh and naked. Start the ghost and Recover My Computer option. So, after 20 minutes, you'll WXP as on the old HARD drive.

  I did it with my old Tecra.

• Satellite A200 - 23 c does not see the 2 GB Memory Stik Duo

  For me for laptop Toshiba Satellite A200 23 C. I

  t does not see memory card 2 GB Memory Stik Duo. I changed operating systems that did not help.

  All devices to see this card but on my laptop is not present.

  Other maps of working memory. How it can be a business.

  If possible, write in Russian and in English not absolutely understand that.

  Thank you

  First of all in this forum, you can post only in the English language. Other languages are not tolerated.

  Back to your question;
  Have you checked if your laptop Satellite A200 - 23 c supports this type of card?

  I ask because not all cards can be used in the slot of the card reader!

  As far as I know this laptop supports:

  -SD Card 8MB - 2 GB
  -SDHC 4 GB card
  -16MB - 2 GB xD Picture card
  -Memory Stick 8 to 256 MB
  -Memory Stick Pro 256 MB to 2 GB
  -MultiMediaCard 8 MB - 1 GB
  -miniSD (with SD adapter) 32 MB - 2 GB

  The Memory Stick Duo is NOT supported!

• professional XP System Restore does not

  My system restore doesn't work on my xp professional and I think that there are errors in registry. Can anyone help please?

  What does "does not?

  Why do you think there are errors in the registry?

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: Microsoft Security Essentials (MSE), McAfee, Symantec, Norton, Spybot, AVG, Avira!, Panda, Trend Micro, CA, Defender, ZoneAlarm, Comodo, PC Tools, etc.

  What is the issue that you are experiencing that you think that the system restore will be remedied (or you are just convenient)?  Remember that the system restore is not a time machine.

  Have you ever used the system restore to restore your system in the past?

  Describe exactly what happens when you try to perform a system restore and the error messages you see which indicates that it does not work (some thing besides 'it does not work").

  Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.

  For example, if you use Norton/Symantec products, you will see a message like this:

  Restoration incomplete. Your computer cannot be restored...

  It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:
  https://support.Norton.com/SP/en/us/home/current/solutions/v51118464_EndUserProfile_en_us?product=home&version=1

  According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.

  Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.  Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.  It works for some configurations.

  Note that if you do a Safe Mode system restore, you will not be able to cancel it and there is no option on the System Restore screen for "Undo my last restoration" as you would if you were to restore your system from a normal startup.

  Give these ideas some consideration if they apply to you.

  Sometimes malicious will afflict your system restore to prevent you to find and remove malware.  It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.

  No matter what you use for protection against malware, I do so and then only begin to solve any problems:

  Download, install, update, and make at least a full scan with these free malware detection programs can solve any problems:

  Malwarebytes (MMFA): http://www.malwarebytes.org/products/malwarebytes_free
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  It can be uninstalled later if you wish.

  The scans by operating clean, reboot, test and we can fix any other issues.

  System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore.  This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore.  You don't have to reinstall XP, only the part of system restore.

  That can leave you with your problem of unspecified origin that you hope the system restore will fix (using a system restore is usually not equivalent to fixing the problem though).

• Elements of 14 does not "see" Nikon D500

  Just upgraded to items 14 on my mac to work with my new D500 camera but action to import in Organizer does not see the camera.

  Have the latest version of the elements and the latest version of the firmware of the device.

  Picassa and Photos mac programs see and can import from the camera.

  Can't see a thread on the forums about this, if there is an apology and that someone can point me in the right direction?

  Thank you

  Just learned thanks to the support that it is a problem with the operating system of 14 elements and Mac El Capitan.

  Quick work around is to use hampered "Image Capture" to import photos to a folder on the mMac and then import them in organizing elements through files and folders. A small inconvenience and works quickly and simply

• See connection to the server does not see any source

  Hello

  I have a very big problem, my opinion-connection to the server does not see any computer desk-source. I had seen some sources but not all a few hours ago. At this point, I did not see the sources I so did many trys to see this source. Overall I don't have luck, and now I see no source.

  The problems started with a VM Windows Server 2003 EE SP2, I need training to be deployed with a view. I have not seen this virtual machine, either I chosse linked clones or not.

  The journal of the events of this virtual machine show, auto login TP Server service not started right.

  I hope to have some ideas that will help me to solve this problem.

  Greetings

  You can use a server OS in a pool of Terminal Server services.  If you want to set up a desktop computer, you will need to use a desktop supported OS.   You can find operating systems supported in the Administrator's guide, http://www.vmware.com/pdf/view31_manual.pdf.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• Satellite A30 does not see other devices in the wireless network

  I recently bought a Toshiba Wireless LAN Mini PCI Card, I installed and was able to recognize my broadband, but he does not see the other network devices. I have not provided with drivers or software for the operation of the card (I bought a decent retailer). Can you recommend me to downloads that would be this card?

  I have a laptop of Satelite A30 1 GB ram 60 GB HDD.

  Large files sometimes also stop transfer (crashes) when you use my USB connection. The usb controller uses the driver microsoft 5.1.2600.0 dated June 1, 2002.

  Is this a driver problem?

  Hello

  If the wireless network adapter is properly installed if you have not configured you.
  I put t know which devices in broadband services, you want to say but generally if you want to communicate or transfer files between laptops through the WiFi network so all the computers must be in the same domain or workgroup.

  I can't give you a correct answer, but only a suggestion. I have red that sometimes a lower potency could be responsible for this show. Try turning off the safe power option in the properties of the hub USB root in Device Manager.

  Hello

  If the wireless network adapter is properly installed if you have not configured you.
  I put t know which devices in broadband services, you want to say but generally if you want to communicate or transfer files between laptops through the computer WiFi network so all must be in the same domain or workgroup.

  I can't give you a correct answer, but only a suggestion. I have red that sometimes a lower potency could be responsible for this show. Try turning off the safe power option in the properties of the hub USB root in Device Manager.

• 'System.DateTime' does not contain a definition for 'HasValue '.

  I develop a lightswitch application. But me make mistakes trying to build the application:
  using System;
  using System.Collections.Generic;
  using System.Linq;
  using System.Text;
  using Microsoft.LightSwitch;
  namespace application
  {

  partial public class Section
  {
         
  SectionDisplay_Compute partial Sub (Ref DateTime result)
  {

  If ((this. Course! (= null) & (StartDate! = null) & (teacher! = null))
  {

  Assign the result to the value of the desired field

  result = String.Format ("{0} ({1}) [{2} - {3}]", Course.CourseName, Teacher.UserName, StartDate.ToShortDateString (), ((StopDate.HasValue)? ") StopDate.Value.ToShortDateString (): "'));

  }

  }
  }
  }
  This is the code. Get the following errors

  Error 1 'System.DateTime' does not contain a definition for 'HasValue' and no extension method 'HasValue' accepting a first argument of type 'System.DateTime' could be found (missing are you a using directive or an assembly reference?)
  Error 2 'System.DateTime' does not contain a definition of 'Value' and no extension method 'Value' accepting a first argument of type 'System.DateTime' could be found (missing are you a using directive or an assembly reference?)
  anyone help me please in this ASAP?

  Hello

  What operating system is installed on the computer?

  The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums. You can follow the link to your question:

  http://social.msdn.Microsoft.com/forums/en-us/categories/

  Hope this information helps.

• MAX does not see the cards as DAQmx

  I have three cards OR in my machine: PCI-6602, 6120-PCI and PCI-MIO-16-4 (aka PCI-6040E).  For some reason any my measurement & automation explore (MAX) does not see them I expect.  He sees the card PCI - MIO in the DAQmx and NOR-traditional DAQ records, but he sees that the other two in the traditional NO-DAQ folder.  I should be seeing them all DAQmx AFAIK.  I read in a post on this forum that I can be a corrupted database MAX; so, I renamed and restarted does not.  I have applications that I programmed in Delphi that see, acess and use all three cards using traditional DAQ, so I know they work, at least to some extent.  When I use LabVIEW, he sees only the PCI - MIO map for operations of DAQmx and I'd like to find a way to make all three of them consider DAQmx.  I believe all three cards are compatible with traditional DAQ or DAQmx.  My installed software versions are: LabVIEW 7.0, MAX 4.2.1.3001, NOR-Spy 2.0.0.16, 1.70 OR-488. 2 NOR-DAQmx 7.0.7f0, NOR-PAL 2.0.0 OR-SWITCH 2.00.49156, NI-VISA 3.1, NOR-DAQ 7.4.4f7 traditional (I also tried 6.9.3f4 version without success).

  I hope that it is something with a simple fix.

  Thanks in advance to those who take the time to read and respond to this message.

  Thank you

  Neil

  Did you look in the Readme for DAQmx 7.0? It was the first version and these devices were not yet supported. The latest version of DAQmx you can perform with LabVIEW 7.0 is version 8.1. These cards are listed as being supported.