Operation failed because another task is in progress.)

Similar Questions

• Snapshot failed because another task is underway

  Hello

  I use VCB to backup vm and has encountered a problem of snapshot. The log shows that "failed to create snapshot: operation failed because another task is in progress.

  Are someone knows it what it means and how to fix it?

  Here it is the log:

  Error: Another error occurred: failed to create snapshot: operation failed because another task is in progress.

  An error has occurred, cleaning...

  Deleted directory E:\VCBBackupRoot\CSGSGPKEXT04

  VM error: snapshot 'CSGSGPKEXT04' failed

  De : [email protected] time ' VM-csgsgpkext04-FS-all the days ': 2009-08-18 21:56:17

  Session remote exec script vmwarepreexec.cmd

  on the tkimxcvomc01.omcapj.adapps.hp.com host failed. Exit code = 1

  De : [email protected] time ' VM-csgsgpkext04-FS-all the days ': 2009-08-18 21:56:17

  None of the officers disc completed successfully.

  Session failed.

  Thanks in advance!

  LAN Lan

  I had this recently and I concluded that it was stuck create or was to create a snapshot of the thought. Try a:

  service mgmt-vmware restart

  on the virtual machine running on the host and if it is connected to a VirtualCenter / vCenter also try one

  service vmware-vpxa restart

  If the one doesn't fix it.

  Confirm also in the virtual machine folder that there no snapshots already there, if there is you will have to perhaps create and remove all snapshots after the serives are delivered to market as stated above.

• The operation failed because no appropriate resource is found

  Hi all

  I installed the version of piphany OVF vCloud on my ESXi. I managed to install all compontes, including organzization & VDC.

  No error spoted in my settings.

  I'm alwayes when you try to run vApps/VM this error:

  -L'operation failed because no appropriate resource was found. The operation failed because no appropriate resource was found.

  What resource is missing? I have downloadable storage... so what is the case.

  I don't know where to look... I tried to change the virtual machine hardware settings, has not solved the problem.

  Thank you very much.

  First off the coast of never change in vCenter which controls the vCD. It can really mess up your environment. I made this mistake when testing vCD 1.0 and 1.5 to try to match some of the things we were doing in the laboratory Manager.

  Then, don't worry ESXi nested because it's the same concepts, once you get the operational environment.  We run in our test environment of this way as well and didn't have any problems.

  What resources your ESXi (those nested used by vCD) hosts have in the measure of the number of vCPU (and speed) and the amount of memory?  How are other virtual machines running on them (such as your cell of vCD, vCenter, POSSIBLE, etc...)?

  As much as your benefits I guarantee that many resources to the virtual machine.  In our software development environment we guarantee only 10% of CPU/memory and we validate vCPU speed to the ESXi servers.  Looks like your screenshot, you have only capacity for 3.95 GHz but you have allocated 3.5 for the first virtual machine. At that time there you won't able to launch virtual machines more.  If guarantee you only 10%, you will be able to turn up more.  Given that you test just the product I wouldn't worry CPU contention at this point.  When you get into production, you will have more resources to fix this.  You are other options is to add more vCPU to your nested ESXi hosts.

  Eric

• Operation failed because the file already exists

  Hello

  I have a quick question and I don't know how to fix it.

  I used VMWare vCenter to migrate and existing virtual machine, he got stuck and failed.

  I went to Virtual Infrastructure delete the virtual machine but for some reason still exist some files and I see the files allocated for this purpose.

  I tried to migrate it again and I get the following error

  Operation failed because the file already exists

  Cannot create disk virtual /vmfs/volues/xxxxxxxxxxxxxxx/FreeBSD/FreeBSD.vmdk

  How can I manually delete this file (s)?

  Thank you

  Paulo

  Is it possible that I can manually delete these files?

  One way is using the data store browser (right click on the data store and select Browse).

  WARNING: it is not an undelete function

  André

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers

• vmrun start leads to a "error: operation failed because of the current state of the system.

  Hello

  I am running the vmrun like this on the console command.

  / usr/bin/vmrun t CR h https://ourhost/sdk u ouruser Pei ourpwd start ' build001/build001.vmx [datastorename] '.

  I get the error text:

  Error: The operation has failed because of the current state of the system
  

  When I opened the Vsphere client, I see that the operation began, but also with an error: the operation is not allowed in the current state.

  I'm running on VMWare Vsphere Server Version 4.1.0 Build 258902

  How can I make sure via command line that the State of the system is correct. Is there a way to get corrected through an order status?

  When I try to power to the top of the image within the user interface, it works, but I need to know the opposite effect.

  Thank you.

  Hello and welcome to the forums.

  check via the State of the line of command of this virtual machine if necessary, unblock the process using vmsuport x how to show in this http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1004340 Ko

• The operation failed because no appropriate resource was found. Hub 'Resources' is not enough "*" storage: required - 60000 MB, available - 0.

  Hi all

  vCD: 5.5.1

  Today I am facing a problem with my vcd where I can't deploy the new TIME in our environment.

  I have checked and made changes.

  First I thought that its a problem of storage. but I already have 18,84 TB of storage available out of 44 TB.

  Secondly, I have change the minimum level of the data store.

  Third, I've recreated the strategy of storage but not useful.

  Fourth, I added a new storage to a different data store and the virtual machine deployed on it successfully.

  I am therefore still contained what is the exact problem out there.

  Some things are super funny with vmware.

  Thanks IamTHEvilONE & ccinatl

  Today, I fixed the problem on my car. I don't know what was wrong. but I removed the old storage profile tags etc. vcloud Director and vsphere himself. created a new. and now its work superawesome.

  I forgot to tell you the reason. as I suspect: I created the profile of storage 1 year ago and until that day the data store frequently updated with size and name at a time. 2 days ago, I added this profile of storage. Maybe it is the reason, but no more.

  See you soon.

• Clone and snapshot operation failed because the file already exists

  I read the article "http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1007193.

  If the delta is named < diskname > - 0000xx - delta.vmdk, create an empty file named < diskname > - 0000xx.vmdk.

  Does anyone can say why is

  Case of inoticed something vmdk name is server01.vmdk (DRIVE C), SERVER01_1.VMDK (drive D). Now what I saw in the vm data store

  SERVER01.VMDK (DRIVE C), SERVER01_1.VMDK became something else

  Why it happened,

  How can I know when this gap that happened by creating snapshots?

  Timestamps of files, problems with snapshots is past may, 25 and 26.

  As I mentioned before, move ' _APLSV-000002 - delta.vmdk "in the directory"backup"or create a dummy"_APLSV - 000002.vmdk"(content should not serious). This will allow you to create a new snapshot to activate the button 'clear all '. It should still work with the virtual machine, so there is no need for the time stop.

  If deletion and creation of the snapshot has been good, then, the snapshot of the first and the second disc should be _x-000005

  Yes, usually the numbers for different drives are the same. However, in reality no matter.

  André

• Operation failed due to an unknown error.  Reinstalled Adobe but always malfunction and editing is not being saved.

  I'm not tech savvy but not know how to download programs.  I downloaded Adobe Reader but the program does not work.  I edit documents (signature), but when I go to save it I get the following message: THE OPERATION failed because ADOBE ACROBAT DC ENCOUNTERED AN UNKNOWN ERROR

  I uninstalled and reinstalled the program but the problem is not resolved.

  Help, please!

  Hey RememberAmy,

  We could certainly help you.

  Please note that it is not possible to edit PDF files with Adobe Reader (which is completely different from the Acrobat software).

  But, if you try to modify a PDF using Adobe Acrobat, then please let me know if this happens with all PDF files or someone specific.

  You could try to recreate the PDF file by choosing File > print (select Adobe PDF as the printer) and then edit the file.

  Let me know if this helps.

  Kind regards

  Ana Maria

• Operation failed. Validation of the backup task execution failed error message on startp

  Title: backup original validation task execution failed

  Receive message at next startup:

  Operation failed. Backup validation task execution failed. Description: Description of the scene see log operation for more details.

  I looked at the log of the operation and there were entries for each occurrence. Unable to determine anything else.

  Hi BobBianconi,

  (1) since when are you facing this problem?

  (2) what backup program do you use?

  It seems that you use non-Microsoft backup software. If this is true, you can check with the provider of software for known problems.

  The following steps can worth a try:

  Method 1: Run the fixit available in the link below for common system maintenance tasks.

  Difficulty of broken desktop shortcuts and common system maintenance tasks

  
  Note: Fixit would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of data loss from that particular area.

  
  Method 2: activate the boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

• First AID (10.11): "impossible to turn up the volume for the repair, the operation failed."

  Hello everyone

  I think I'm in trouble here...

  After I did a clean install of 10.11 two weeks ago, my Mac Pro 3.1 (2008) began to take a long time to boot up to the desktop. The actual load of the operating system (with the progress bar) is fast, but it takes a while (minutes) to enter my password until the computer is accessible at the level of the office. I have almost nothing the autostart value in Sys Prefs users.

  The startup disk is two SSDs over a Sonnet Tempo Pro and the folder of the user is on a separate HARD disk.

  Because the slow pace is the point where to enter the password, I thought that there could be a problem with the folder of the user HARD drive. I had my user folder on a HDD separated for the last several iterations OS X without problem, but in the fall, I needed more space and bought two new 3 TB drives (one for the clone SuperDuper). They ran very well in the Mavericks.

  When I run THE first AID on the volume that contains the folder of the user, I get the following error (it does not appear if I run first aid on the HARD drive itself):

  "First aid process has failed. Save if possible data on this volume. "The details section of the dialog box reads:

  "Update support partition for the volume to the need

  Impossible to disassemble for repair volume

  Operation failed... »

  Worrying, I get the same error if I run first aid on the volume of the other 3 TB drive that holds the user folder SuperDuper clone.

  I suppose that the two new 3 TB drives may be failing at the same time, but it seems a bit unlikely. Does anyone have an idea of what other causes, there could be for these errors?

  I would be very grateful for any help, as this is my main machine. Thank you in advance,

  EDIT: I realize I should have posted this in the OS X El Cap - my apologies for this forum. Also, I find this recent thread that seems to suggest that there is a bug in Dug, I get the same errors when I run first aid on my other two internal drives.

  Philippe

  BTW, I tried to start in safe mode, but that has not changed anything. Also, I created a test (with the record on the striped SSD) account. Representing loads very fast after that I entered the password.

  Thanks in advance again

  Philippe

• HP Photosmart 5514: HP Photosmart "in use with another task' error.

  I'm sure you're all sick to see these questions, but I have not found that a reliable solution among the responses presented anywhere else on the internet.

  I have a printer HP Photosmart 5514, part of the 5510 B111 d e-all-in-one printer series, and it currently only allow me to scan a single document (with multiple pages). I connected via USB, not the network connection. My current operating system is Windows 10, 64-bit. I've uninstalled and reinstalled the drivers several times, using different methods: a part of the HPSolutionsFramework, installation of the manual pilot on its own and even with the method of detection of device HP Support Assistant. I tried the most common answer of "unplug, restart the computer, plug in. I also tried printing HP and doctor Scan to see if there is a driver problem but it clears all controls and nothing seems to be wrong. To be clear, restarted my computer "solve" the problem, even temporarily and no is not a final solution to my problem.

  Explanation of the issue:

  I run the HP Photosmart 5510d series software and click on the button "scan a Photo Document or". When the window opens, I click on "scan document to the file" and proceed to scan my document with however many pages, adding each page I want. When I'm finished, I hit 'save', my backup file and click 'done '. When I proceed to scan another document, hit the button causes nothing happen but one his mistake. When I start printing HP and Scan doctor and trying to do an analysis of test after he tells me that everything is going well, I get the error message:

  "The HP scanning application is currently in use with another task or another user on this computer. Please wait until the other task is finished, and then try again. »

  To be quite clear, there is no other task that I'm aware of in addition to the fact that somehow the software does not seem to let go of the analysis. There are no other users who use the computer outside of me. There is no other hidden running application. I went through the Task Manager to kill all the associated HP process to see if something it stops to run again. The only chance I have is with my computer restarts, but it would be foolish to scan documents of mass and restart after each.

  It worked properly on my other hard drive with the same version of Windows 10 installed on it. 10 Windows installed on a new drive and it does not appear to want to work after 1 document.

  If anyone has a help in this case, it would be greatly appreciated.

  Hi @Yenroh,

  Welcome to the Forums of HP Support!

  I see that you are able to scan with your HP Photosmart 5514 printer wireless. I'd be happy to see this with you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  Generally speaking, the reason why you get "the HP scanning application is currently in use with another task or another user on this computer. Please wait until the other task is finished, and then try again. "is because that the network signal is lost the connection and the freezing of the task analysis or the previous scan operation never ended.

  Please, try the steps in these guides:

  • Scan network connection is lost (Windows)
  • "Scan cannot be performed because another program or computer uses the network device" message in Windows when scanning on a wireless network

  TIPS:

  • Move the printer and the router more closely in order to improve the quality of the signal.
  • Change the channel on the router wireless.

  Ensure that your router and firewall do not block these ports.

  • Scanning: The UDP port: 427 TCP ports: 9220, 9500

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• system failed because iertutil.dll was not found.

  When you start windows xp pro starts then stops and says this application has failed because iertutil.dll was not found.

  When you see a message like this:

  Explorer.EXE - unable to locate component: this application has failed to start because iertutil.dll was not found. Reinstalling the application may fix this problem.

  It is in the case Log:

  Event type: Information
  Event source: Application Popup
  Event category: no
  Event ID: 26
  Date: 18/02/2010
  Time: 08:38:48
  Description:
  Application popup: Explorer.exe - Unable to locate component: this application has failed to start because iertutil.dll was not found.  Reinstalling the application may fix this problem.

  The iertutil.dll file is required for explorer.exe at startup.  If explorer.exe is not able to run, you will not be able to do much with your system until the file is replaced.

  The file may have been deleted accidentally, malicious software could have deleted or your anti-malware software could have been quarantined it thinking it was a threat.

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  First of all, here are all the things you can 'try' which do not work:

  sfc/scannow

  The iertutil.dll is not one of the files that are protected by Windows File Protection, so it will not be replaced automatically if it's missing 3498.  This means that sfc/scannow won't help you.

  It is also not on your XP installation for you CD to copy or develop.

  You will have the same problem trying to start in any Safe Mode.

  You will not be able to run a browser on the system afflicted to go on Internet download one.  There is also a computer big security risk when downloading files from Internet sites anyway.

  You can still use the Task Manager to run the system restore and back, but I've never tried.

  If iertutil.dll is missing, you can copy from a system that works in the system afflicted with the same version of XP and Internet Explorer or sometimes copy one from another location on your system.

  You can get a good copy and put it on a floppy disk, thumb drive etc and copy it to your system plagued by using Manager tasks.

  When you see the error, you can click beyond it and eventually arrived at your screen background image where you can press CTRL-ALT-DEL to start Task Manager. TM you can click file, new task, browse and edit the menu drop-down "Files of type" to all files that you can see all the files in all the folders.

  Browse/navigate to c:\windows\system32 if iertutil.dll is really missing. If the error appears again while browsing, click OK to get past it.  The explorer.exe tries to run and cannot until the missing file is replaced.

  Then, still using the Task Manager, go to the c:\windows\system32\dllcache and see if there is a copy of the file.

  If this isn't in c:\windows\system32\dllcache, it is going to be elsewhere on your system and you will find another way.
  Start by looking in c:\windows\system32\dllcache.

  If it's the only thing missing, you can just copy the file to the c:\windows\system32\dllcache and paste it into c:\windows\system32 where it belongs.  If you don't, get one from a working system of the same type as yours, copy to a Flash DRIVE or a floppy disk and always using TM, browse, copy and paste it where it should be.

  TM, you can always access your thumb or other media same diskettes by navigation, copy, paste, etc. all work fine.

  You use TM to navigate to your thumb or floppy disk, copy the iertutil.dll good and then paste it in the c:\windows\system32 folder, where it is supposed to be.

  When go you there once again, your system may still be affected so no matter what you use for malware protection.
  follow these steps:

  Download, install, update and do a full scan with these free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  It can be uninstalled later if you wish.

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• The installation failed because the Windows Installer is underway

  I try to install Gmail voice and video chat on my HPTouchsmart and get this error "failed to install because Windows Setup is in progress. Please wait for installers to complete, close all Windows Installer... "But I do not want to install anything else.  Anyone know how to fix this?  I had time to settle down before, but can't remember how I got around it (I remember it was a chore).

  No, no process of Setup running, it's the annoying part.  It is apparently a known issue with Vista.  The solution below is annoying, but came from HP and the only one that I know that works:

• Can't do dmg file in the folder - "operation failed with status 1"

  I have a 1 TB hard that often went around. There are some personal files here although I am trying lock creating a DMG using disk utility and turning on encryption. However, whenever I try to do that, I always get an error code - status 1 to be exact. Note that it only does on some records. I had about 15 cases work this way with success, but I get this error a LOT... probably about 40% of the time. "Whenever I try too search ' operation failed with status 1," nothing appears! So frustrating! Any help at all is greatly appreciated! Please see the photos to see more. Thank you! Information... Files in JPEG areinformation1st picture2nd photophoto 3

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Satellite A100-496: WLan authentication failed because of incorrect password

  Friends,

  I use Intel PROSet Wireless user interface to connect to my wireless router.
  Because of this process, I have disabled my windows for wireless control configuration.

  However, despite the use of the property of device correct password and the password, I am unable to connect to my WiFi router.

  I get an error stating
  * "Authentication failed because of incorrect security password." *

  I use the same password key to connect wirelessly through my other laptops, and they work fine...

  I can't find the reason for this failure of authentication...
  All the world is facing a similar problem?

  Is there a way I can allow windows to control my authtication rather than Intel PRO Wireless...

  Please guide me...

  Kind regards
  Dhiraj Shetty

  Hello

  Again activate the Windows configuration and use Windows WLAN options to configure WLAN connectivity. To be honest, using Intel PROSet, this should work too.
  Try to remove the protection of password on your router for a moment and test the connectivity. To be honest, I'm sure that there is something wrong with the settings of your laptop.

  By the way: what operating system do you use?