Optiarc dvd rw ad 7280 s ata device has a driver problem

Similar Questions

• Lenovo Y430 - drive Optiarc DVD RW AD - 7640 S ATA Device dvd does not

  Hi guys,.

  My Lenovo Y430 - drive Optiarc DVD RW AD - 7640 S ATA Device dvd does not

  Its not reading any cds/DVDs.

  Please could you help me how to fix it

  Once am put any DVD that the DVD is flashing and after a few seconds, his flashing no more.

  Mine is under WIndows Vista SP2

  I checked the CD-ROM/dvd-rom drivers in its 'active' display ' device working properly "Device Manager and registry also to 'upperclass' or 'lowerclass' settings entry just good.

  Please someone help me how to solve this problem.

  Thanks in advance.

  Kind regards

  Rambeau

  ++

  @bjawasa is 90% out of material. Lenovo ask to change your dvd - rom with a new free of charge if you have the warranty.

  You can call the help line: hindi or English speaking - 1800-3070-0010 (Toll-free) or 1800-113-324 (Toll-free)

• Software peripheral drive not properly installed - Code 39 - Optiarc DVD +-RW AD 7580 A ATA Device

  Need help!
  Recently bought a laptop Dell Inspiron 1525 using the Vista operating system.
  The DVD + RW device worked but recently failed.
  Device Manager found the driver who is Optiarc DVD +-RW AD 7580 A ATA Device
  Device Manager is a (-) marker that tells me that the driver does not work.
  I tried to update the driver but the message received is "already installed the latest driver.
  I wanted to uninstall driver and rebooted the system.
  On reboot, the system attempted to reinstall the driver for my CD ROM
  I then received message 'disk device software was not successfully installed ".
  Also received message "Windows cannot load the device of this material. Code 39 "
  At the present time, my CD-ROM device does not work.
  I would appreciate anyone who has a solution to this problem.
  Thank you in advance.

  Have you recently installed a new burner software? Several of installs it burner can cause error 39. You can rightclick this link to another thread of responses on the deletion entries "Upper filters" and 'down '. You can remove those creating the CMD file I'll paste it in below, created by William Keener.

  1. Copy carefully and then paste the following three commands in Notepad:

  Reg export HKLM\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}-%userprofile%\desktop\CDFiltersBackup.reg
  reg delete HKLM\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}------UpperFilters f v
  reg delete HKLM\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}------LowerFilters f v

  1. Save the file to your desktop as DeleteCDFilters.cmd.
  2. Right click on the DeleteCDFilters.cmd file to your desktop, and then click run as administrator.

  Note After running this script, all custom CD/DVD filter drivers installed programs maybe isn't able to use your CD/DVD until your reinstall these programs. If the script command solves the problem, you can restore your custom filter of CD/DVD drivers by double-clicking on the CDFiltersBackup.reg that the command script exports to your desktop.

  
  (Soon we will see a button "FixIt4Me" of his team to do this automatically.)

  Mark L. Ferguson MS - MVP

• DVD/CD RW optiarc dvd rw ad-7560 s ata device suddenly stopped working I get a "code 10 this device cannot start.

  My CD/DVD RW optiarc dvd rw ad-7560 s ata device suddenly stopped working I get a "code 10 this device cannot start.  I have uninstalled and still get this error.  When I put a CD in nothing happens.  It is not read.  Any suggestions?

  Hello

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Optiarc DVD RW AD - 7640 A ATA DEVICE

  I am able to read the CD in my DVD RW drive, but not a DVD.

  Earlier, it was working fine.

  Don't know since when it has stopped working.

  I have 'Optiarc DVD RW AD - 7640 A ATA DEVICE'

  Details of the machine: Lenovo 3000 Y410 7757 88Q with windows Vista Home Basic.

  Hello Manu Mali,

  Well, I would replace the drive with a new one. NewEgg.com is a great place to watch here: http://www.newegg.com/Store/SubCategory.aspx?SubCategory=5&name=CD-DVD-Burners I recommend the Pioneer players. They are expensive these days. Hope this helps you. Let us know anyway. Make it a great day!

  "In the end the love you take is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• ATI high definition Audio device has a driver problem

  All of a sudden Windows 7 can find any Audio device.

  The troubleshooter is running a nd reinstall the drivers down.
  Problems found
  ATI high definition Audio device has a driver problem ATI high definition Audio device has a driver problem There is a problem with the driver for ATI high definition Audio Device. The driver must be reinstalled.	Not fixed
  Reinstall the device driver

  Check the audio device Detected There could be a problem with your audio device.

  I solved it by going to the registry and by locating and removing the UpperFilter = LVUSBSta.sys
  to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class
  I have an Intel mother board DP55WB with an onboard Audio device and Windows 7 Professional.
  LVUSBSta.sys is a virus, Trojan, spyware, adware.
  See http://www.file.net/process/lvusbsta.sys.html

• driver problem Optiarc dvd rw ad - 7561 s ata device

  Dear Sir.
  Recently, I buy a compaq presario CQ61-115EE before Laptop.Twodays I was watching the movie by the player. After that, I loaded panasonoic camera digital cd software tried to install in my laptop, because installed everything except fast player and at that moment, I uninstalled all programs related to the software of panasonic. On this day evenining I'm watching the movie again via a system drive, but is not running. So I went to the cotrolpanel Device Manager. In that I crossed optiac dvd rw file and observed in driver Panel. In this appearance, Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. And I tried to update via internet but showing only already updated file is in the laptop.

  My LAPTOP is compaq presario CQ61-115EE with windows vista Home premium service Pack 2.
  Optiarc DVD RW AD-7561 ATA Device

  Please help me solve this problem.
  Thank you

  vsrao
  Engineer (execution of piping)
  Muscat

  Muscat vsrao

  Hello Valerio srinivasa rao,

  Have you tried to uninstall your optical drive through the Device Manager and restart your computer? If this isn't the case, you should do it.  Otherwise, have you tried this miracle solution?

  Link: http://support.microsoft.com/kb/314060. You need to uninstall all third-party software (example: Roxio, Nero, or iTunes) from your computer

  prior to this fix. After you restart, you can reinstall your software and try again to see if that solves your problem. Otherwise, it could be that the drive is dusty

  (goal) or bad. Hope this helps you. Let us know anyway. Make it a great day!

  "In the end the love you take is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• Optiarc DVD RW AD-7580 s ATA Device. My DVD wont overprinting no matter what media, CDs or DVDs!

  People of the night

  IV brought my laptop second hand. Today I went to start to move my music collection on my laptop, unfortunately my DVD player doesn't want to overlay my CD or DVD even.

  IV read if some threads here and followed some advice. IV reinstall the drive, no luck. I tried to change the registry, but when I got to the correct file, there is no upperfilters or lowerfilters. I confused and stuck, any help will be most apprecited.

  See you soon

  James

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Optiarc DVD RW AD - 7560 A ATA Device

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

  Hello!

  Thanks for posting on the Microsoft Answers forum!

  You must follow these steps and tell us after that is they workout for you!

  1 > go to Control Panel [start - Control Panel]

  2 > click on device-> CD/DVD drives Manager - Rom-> right click on your drive and click on uninstall. If she asks, click on remove all software driver for this device.

  3 > stop your system (if you have a laptop, just restart) (if your desktop - open your Cabinet and remove cords to power the dvd player) (only if you are familiar with the process)

  4 > start your computer with the twinned strings (office)

  5 > when it starts completely stop.

  6 > reattach and restart the computer.

  7 > it should reinstall the drivers now.

  If this does not solve your problem. Try running system restore if you dvd player was working fine before. Alternatively, you can try to boot from the DVD drive by inserting the windows installation dvd in the drive, and then perform the system restore.

  Please letus know if this solves your problem.

  Microsoft-Most-Valuable-Professional, blog at: http://www.thecomputernext.com

• Cannot load programs: _ Optiarc DVD RW AD - 7203 A ATA Device.

  Tried to load a program.  Is not loaded, run from Diagnostic report, said the device unusable material.  Such failure using the VxD (code 19) charger.  A run Device Manager. I received the message: "Windows cannot start this hardware device because its information configeration (in the registry) is incomplete or damaged (code 19).»
  I loaded the program in the past, no problem. I saw a similar problem of Nikki, but with a problem of 'code '. 10  The very complicated enjoy solution so didn't do.
  I also have Windows Vista Home Premium, Copyright 2007, Service Pack 2 system Type 32.
  I tried uninstalling the driver where it said to uninstall in Device Manager.  Rebooted and tried to get the system to find the driver and then reinstall but it just says my driver was updated and did nothing.

  Help!

  Texas Rose

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.

  Normally the above will solve this problem otherwise working your way down through them, even if you did
  them before.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Optiarc DVD RW AD 7200 a ATA Device

  Unit has stopped working!  My computer is a desktop computer - ASUS M2 series M2N.  Driver MFG: Microsoft Version: 6.1.7600.16385 just put update to Windows 7... Unit worked for about a week after the update.
  Under properties to update driver received "best driver for your device is already installed" Windows Update shows. "driver software is up to date.
  Also: "update driver software: CD-ROM drive get this answer" this device cannot start (code 10).
  Have not been able to determine what code 10 means.
  Any help would be appreciated.    Thank you
  ALSO: I tried to uninstall and reboot... do not work
  After searching this forum, I found an answer and tried... it worked!  A response from Martin at Jackie Murphy... Thank you
  ' I am' learning ' forums are great

  Thanks again

• My player will not recognize a drive Optiarc DVD RW AD - 7203 A ATA Device

  I insert a disc and the drive does not recognize the disc whether it's a program, CD, DVD, etc.  I uninstalled the drive and then restarted is drivers re-installed but it still does not work.  What is the next step short of getting a new drive?

  On Thu, 20 Sep 2012 14:25:35 + 0000, Cameron O wrote:

  Considering that it has moving parts, they can break or wear out. Something to try, would be to get your hands on a cleaning disc and run a few times. You can get them cheap from most department stores, but I've also seen convenience stores as well.

  It does not hurt to try one, of course, but my experience with these
  cleaning discs, it's that they are unnecessary and do not help. It is likely
  that the drive must be replaced.
  Ken Blake, Microsoft MVP

• Vista does not open a cd/dvd using MATSHITA DVD-RAM UJ-850 s ATA Device

  my laptop has a MATSHITA DVD-RAM UJ-850 s ATA Device. but it does not open a cd/dvd. Why?

  Hello

  1 recently, you did changes to the computer?
  
  Method 1. Uninstall and reinstall the cd - dvd drive.
  If the drive is not listed, remove and reinstall the existing drivers.
  To do this, follow these steps:
  a. Click Start and then click Control Panel.
  b. click System and Maintenance, click System and then click on Device Manager.
  Note that if control panel is in Classic view, double-click System and then click on Device Manager.
  c. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  d. in Device Manager, expand CD-ROM/DVD-ROM drives, right click on the device CD and DVD and then click on uninstall.
  e. When you are prompted to confirm that you want to remove the device, click OK and restart the computer.
  After the computer restarts, the drivers will be installed automatically.

  Method 2. The firmware was updated.
  I would also recommend updating the firmware of the CD - DVD drive.
  You may need to contact the manufacturer for it.

  I hope this helps.

• This device cannot start. (Code 10). Matshita DVD-RAM UJ-850 s ATA device not found.

  The operating system does not detect the Matshita DVD-RAM UJ-850 s ATA device on my Toshiba Satellite. I tried Microsoft Auto difficulty and it didn't fix it. The CD player worked last week when I installed ITunes software. Now, the driver cannot be detected. Known corrections or suggestions?

  You must uninstall, then reboot and let the program installation is the device when it restarts. If the correct drivers are found, it will install. In case of failure, it's probably because Search Setup default is files of the user and not the C:\windows\inf or directories c:\windows\system32\drivers\, which you can specify by choosing to install from a list or specific location, and then by typing or by going to the it. If this fails, check the bios settings.  But most likely your original driver was silently replaced, by a program system file or a third-party application. If need be, you can try a system restore to return the parameters of your system to a point in time where everything worked. I would try one more point to restore and not a newer version, preferably a restore point launched machine, not one caused by installing or removing a program or a driver. "THE BEST THING TO DO IN THIS WORLD IS A WRONG ANSWER! "I"DON'T"WINDOWS...". »

• Windos Vista no reconoce unidad MATSHITA DVD-RAM UJ-850 s ATA DEVICE

  MATSHITA DVD-RAM UJ-850 S ATA DEVICE

  I'm sorry, but these Vista Help Forums only provide support in English.

  http://support.Microsoft.com/common/international.aspx

  To ensure that you receive support appropriate for your location information, select your region setting in the list on the link above and then click the arrow button.

  Thank you.

  Mick Murphy - Microsoft partner