Optical flares

Similar Questions

• Optical flares obfuscation does not

  As you see in the picture, I have a layer of logo (with transparency) between a flare over the optics and a camera... and I put the darkening of optical flares to the logo (with transparency) layer but the flare is always on top of the layer instead of below. What I am doing wrong?

  You use collapse transformations on your layer, which changes the order of treatment and does not correctly detect the buffer. You cannot use this way.

  Mylenium

• Problems with the optical flares properties

  So I have a script that goes through various for loops and turns to special effects applied to a layer and gets access to the properties and their values (for example the Position XY & -10-9). My script does a loop on the number of properties of the effects to each of them and its value. However, in this case during the extraction of these data, the script stops when it gets to the placement Mode. My only guess is that it has something to do with him having no not a stopwatch? Is there a way to access and get its name and its value? Thank you!

  

  This property has no value, and if you try to access the value in any way, it will generate an error. You look at the section of the script on PropertyValueTypes. You will have to jump anything with a type of NO_VALUE or CUSTOM_VALUE and a few others need special treatment.

  Dan

• Eruptions optics problem

  Hello people,

  When I apply optical flares on solid layer, I get an error of optical flares

  and it generates a Minidump to a folder, this program creates named

  "Optical flares error logs" inside the folder optical flares.

  I use CS3 AAE, OS WIN XP, Service Pack 3

  Help, please!

  Thanks in advance!

  This isn't a current generation! Download the latest version of the VC plug-in.

  Mylenium

• Error message when you try to make

  Hello

  I'm making a long sequence of 45 sec. I use the Media Encoder, but I also tried the After Effects render engine, but I get the same error.

  This error message when I try to make the sequence:

  ------------------------------------------------------------

  Export error

  Movie compilation error.

  Make error

  Rendering returned the error.

  Writing with the exporter: DNxHR/DNxHD MXF OP1a

  Writing to the file: /Birkir Ásgeirsson/RENDER/Sjonvarp i ar 50/INTRO/background NOTA.mxf

  Around the time code: 00:00:01:04

  Rendering at offset: 0,960 seconds

  Component: DNxHR/DNxHD, MXF OP1a exporting type

  Selector: 9

  Error code:-1609629695

  ------------------------------------------------------------

  I discovered that there is a composition in my main composition that creates this error.

  The (composition) layer called the 'Final TV' is the problem because it works when I turn it off.

  

  It is the villain. This error started happening when I duplicated composition "Screen - episode name" to extend it. This happens even if I take them. I don't have third-party plug-ins in this composition. I don't have particular Trapcode and optical flares in the main computer.

  

  And inside the composition error is this composition.

  

  Sometimes this error pop up, but I don't know what that means.

  

  My computer:

  iMac, end of 2014 with El Capitan

  Prosessor: 4 GHz Intel Core i7

  Memory: 32 GB 1600 MHz DDR3

  Graphics card: AMD Radeon R9 M295X 4096 MB

  After Effects 2015.3 CC

  Version 13.8.1.38

  I found what was wrong and it was pretty simple. I had a long sequence in my composition but lacked the frame of 25 and this is the reason why After Effect can make without the error of 500 images. But thanks for the reply.

• Problem with abnormal analysis result of the Avid 7

  Hello

  Im working on an exported AAF sequence from Avid, I imported it throught importer pro (im on CS6) like 'create movies of Quick Time reference to the avid media files' (flatten movie reference disabled)

  It's okay... the problem is as soon as I left AE, I can't open my project again! Before he stopped at 95% of loading, or 2%, and now just AE down while Im trying to import... Why?

  It's a problem with the anti-icing fluid, because some new plugins (optical flare) installed. I can't just start again all the time!

  Thanks for the tips

  IM on Windows 7

  Vincent

  Hello.

  Thank you. I already tried what you suggest Dave, did not work for me, the problem was something else.

  I finally found the answer on another forum a few days ago.

  I had to go to preferences > media & Disk Cache > uncheck "write XMP IDs files...". ' and 'create layer markers... '. "and instead using Pro Import to import AAF just by dragging in AE and everything worked like a charm.

  I heard that his best drag AAF directly in AE.

• after effect backgroud

  How to do like this background

  I do grid, I know do optical flares...
  
  but I want to like this

  http://S30.postimg.org/lj8u39a69/envato_preview.jpg

  Nothing magical here. Tile, grid, MotionTile, CC Repetile and maybe a few other things combined in several layers.

  Mylenium

• Do I need a discrete GPU to run After Effects?

  I intend to use after effects on my next rig. I'll sometimes make a simple video editing as the fixing of the shaky videos and creating slideshows. I read that the most important thing after the effect is CPU and Ram, so I intend to use the gpu integrated rather than buy a discreet graphics card so I can spend more on cpu and ram. I'm on a budget, and here are the parts that I came up with:

  CPU: i5-6600

  RAM: G.SKILL Ripjaws 8 GB DDR4 3000 (or 16 GB DDR4 2133?) V

  Motherboard: Asus H110M-C

  i5-6600 uses the new HD 530 integrated graphics and I heard when he used with ddr4 ram it is much more powerful than previous generations of integrated graphics. Therefore, HD 530 good enough for video editing casual with sequelae or should I get a slow cpu/ram and spend the money on a discreet GPU? Also should I get a RAM with a faster speed or more capacity from 8 GB 3200 or 16 GB 2133?

  Thank you

  You are right that generalization AE depends on the CPU and RAM.  Some insights are accelerated by OpenGL, that more simple GPU can handle easily anyway.

  Things that the GPU are intended are traced to the RADIUS made (now defunct), 3D Cinema 4 d and some effects applications. In particular, some third-party plugins like video Copilot optical flares and item 3D or Zaxwerks Invigorator, are highly dependent on the GPU.

  But your general use of AE will be fine.

• Video Copilot 3D and error messages from distortion of the heat element

  I have a problem with the 3D and plugins of distortion of the heat element. My work optical flares and contraction with After Effects. I have version 10 of Windows and CC 2015. When I choose a new composition and set a solid color. I applied element 3D or distortion of the heat to test if the plugins worked. It shows a Panel to check-in After Effects, including optical flares and the shaking never asked me to register on behalf of video Copilot.

  It displays an error message after I have shut down the Panel.

  

  How can I fix it? Brucgovn

  > How do I know the plug-ins of VC for the current version?

  You can get this information on the site of video Copilot:

  VIDEO COPILOT

• ? Replaces the missing effect of a model? CS6

  Hi all

  For some time I have been using AE... I wanted to use a model that hive, I downloaded and it asks me to replace an effect. How can I do this please?

  Thank you for any step by steps, again, it has been a few months since I was in version AE CS6

  

  Optical flares is a third-party plugin commercial. You have to buy.

  Mylenium

• Please help its simple light like that

  I want to know how to get light like that to the right and to the left side.i have waveform I want light only,Nightcore - Begin - YouTube

  This can be achieved by creating an element of lens flare in Photoshop and animating its opacity or a glow effect or exposure to this topic.

  You can also use the Lens Flare effect that comes with AE and tweak it a bit (and added some color correction and masks).

  Otherwise, you could buy a lens flare plugin optical flares or Knoll Light Factory.

• Video effects need help

  someone knows how to do these effects in this short video

  The astronomical Kid | Facebook

  Video Ruff bone looks like that done for the most part by elements of film burn composition and leader by top and using a kind of lens flare plugin base.

  There are some elements of free burning, legit light leaks/film here:

  http://vashivisuals.com/free-assets-for-film-and-video-editors/

  I know not all free lens flare plugins, but if you have a little money, video Copilot optical flares or Knoll Light Factory are both very good.

  Video Copilot has a ton of tutorials, if you are just getting started. There are a few pretty good tuts here, as well:

  http://www.creativebloq.com/after-effects/tutorials-1232661

  Good luck!

• Motion tracking: how to link an object that does not have that track?

  Hello

  I have a video, it is a landscape, and the camera moves from left to right. I want a flare that appear on the right side. There is a point which is still in the picture, I used this point to follow the movement.

  But the problem is, when I want to connect optical flares with the track point, the flare is always about to follow-up, but I want a little more on the right side...

  How is it possible to link an object that is not exactly about to follow-up?

  Usually apply you tracking to a null value information, and then use an expression to link the position property of whatever it is you are trying to attach to null with a simple expression. If you need to update the position then you can either add value + at the front of the pickwhip expression generated or and sometimes it's better, add a second null, 2 null null parent 1 and then use a transformation expression space layer on the position property of your effect. The expression looks like this:

  p = thisComp.layer ("Null 2");

  p.toComp ([0,0,0]);

  I don't if I did not properly understand the problem, then please post a screenshot of your project with all the properties for layers in question revealed.

  Here is what something would look like:

  

• Solutions of games/Workhorse GPU for AE, 3D and other processes accelerated by GPU element?

  Currently, my PC is customized with Windows 7 Professional and sports a Phenom II x 6 16 GB of DDR3 Ram and a GeForce 470 GPU, PSU. I used to about 7200 RPM disk drives, as well. Mainly, I use it as a staff, games AND work computer, but now I have a job and macbook pro staff, and now with Adobe CC and GPU acceleration I hope to tune more finely to be a rendering engine. I would like to also keep my ability to play the games of the most recent and - running on Ultra isn't a necessity, but it would be nice to have the ability to push my system to the same graphics.

  I own almost all the plugins video CoPilot, and 3-d element and optical flares use GPU acceleration. I also use Premiere Pro to a lot of editing and I love makes it fast, and I hope to someday add Cinema 4 d or 3DS Max to my software. I want a GPU that can give me a few makes incredibly fast while allowing me to play at a decent rate. My budget is probably around $1000 for a complete overhaul, but I could see myself growing a little more high if she was worth.

  I look at the cards GeForce GTX 750 series (probably the 760 or 770) for graphics, but I'm torn between making the jump to a Quadro 4000. I don't think that the 5000 is in my price range, and I don't know that the 4000 would be perfect for my needs. My main question is essentially... What kind of differences is what I see in the 3-d element and other features of After Effects between these two cards? Therefore, can what kind of differences I expect to see everything by using programs like 3DS Max or Cinema 4 d? Finally, what first seems to me?

  
  I know AE mainly use multicore, so I'm looking to the quad-core i7 4950 my processor. I was AMD, but after seeing it in action on many products of Adobe through my MacBook, I'm starting to think it might be worth the extra money to get an Intel processor. Therefore, as the 3D rendering is not my main goal, I'd like something that can give me a pleasant experience using plugins that are WHAT GPU accelerated - mainly plugins Red Giant and VCP - allowing me to play games.

  If this proves to be a choice between play and work, I guess an alternative solution could be put my old parts in a second case and have a gaming pc, then a working pc. That's fine with me.

  Thank you for any input!

  Katie

  After Effects will be no acceleration of a GPU. Learn more: features GPU (CUDA, OpenGL) in After Effects

  3-d element could be able to handle larger and more complex models with a more powerful card, but I doubt that the Quadro difference would be a price difference.

  C4D uses very little GPU.

  Spend more on a processor more in addition to RAM would make you better than a GPU. If you build a computer for After Effects and first, I strongly recommend to Watch this presentation.

• Using Timewarp on the effects of motion tween...

  I use Timewarp to set the speed of a layer that contains interpolated motion effects (ie. the particles). For some reason any Timewarp is treat the 29.97 FPS and using its vector of mixture layer as regular sequences to interpolate the images (creation of unwanted distortions).

  Ultimately, I intend Timewarping single layer prior comped that contains many layers of different effects (including optical flares, Element, etc.).

  Is there a way to get just Timewarp recalculate and re-tween the query instead of doing it's usual vector mix thing?

  -Pete

  Is there a reason that you use Timewarp on the precomp instead of time-remapping?