optical mouse is frozen on the screen

Similar Questions

• My mouse has frozen on the screen - what do I do?

  My computer was working OK.  Then the cursor froze on screen.  I couldn't shut the computer down and so just shut doen the power.  I turned on it once again, but the cursor is always fixed on the screen.  The light on the mouse.

  Any suggestions?

  Thank you very much

  L

  My computer was working OK.  Then the cursor froze on screen.  I couldn't shut the computer down and so just shut doen the power.  I turned on it once again, but the cursor is always fixed on the screen.  The light on the mouse.

  Any suggestions?

  Thank you very much

  L

  I have an Acer Intel S5 with Windows 7 installed. I had the same problem, that my mouse touchpad & screen FROZE. I couldn't even turn off the power. I did a Google search & followed all instructions to fix the problem, but none of them worked. All was not lost. I just waited the battery to impoverish & the computer is off. I then plugged the power supply & noted AMBER light, showing that the power was connected load. I continued my work on my desk, & after a few hours, noted the amber light goes out & turned BLUE, having shown that it is fully charged. I had no problem if the laptop is turned on by the normal method, & all systems, touchpad mouse was working 100%.

  Hope you find it useful. Give it a try & put your comments on this site or on Facebook. Cheers, Lionel. "down Under, Perth WA.

• HOW IS IT MY MOUSE JUMPS AROUND ON THE SCREEN, OR STOP SUDDENLY

  my mouse jumps all over the screen, and it suddenly stops moving.

  Test your mouse on another PC. If the problem persists, the mouse is defective.

  Test another (known working) mouse on your PC, if the fault persists your PC is faulty somehow.

  It's a mouse laser (light rather than a rolling ball works)? If it is try different a surface or a mouse pad. Some surfaces, e.g. mouse pads and mousepad hologram photo will lead crazy optical mice.

  If it is a bearing ball mouse, clean the rollers inside.

  It is USB, PS/2 or series? Wired or wireless? Check the battery if wireless.

  TRicky

• Pointer is frozen on the screen whenever I press and hold the CTRL key to select individual files, photos etc.

  Pointer is frozen on the screen whenever I press and hold the CTRL key to select individual files, photos etc.

  * original title - mouse pointer freezes *.

  What happened since I bought my laptop with Windows 7. I tried my machine manufacturer and they don't have any idea. It's very annoying to have my pointer freeze and close the lid of the laptop to thaw it.

• NB100 - mouse cursor flies around the screen

  Hello

  So, I bought the NB100 and noticed that something was not right but stupidly put upward with her for over 2 years. Now he is just really annoying as its happens more frequently and, possibly, gets worse!

  Randomly, the mouse cursor flies around the screen, by clicking at the opening programs and files, etc. The only way to stop it is to turn off the laptop holding down the power button. She also does when I plug in a usb mouse (and disable the touchpad) so I assume that it is not the hardware, but I have reinstalled as the driver...

  Usually, if I turn the laptop on its always crazy but if I start it in safe mode its fine. This made me think I had a virus but I did a scan and nothing shows.

  In addition, I don't think that turn it off by holding the power button down is very good for the system that sometimes, when I try to turn it back on, it doesn't load at all (just a black screen with the cursor).

  Help, please! I would be eternally grateful...

  Thanks in advance, Nadia

  need you pretty much time to fix. My advice is to reinstall Windows from disk image or hard drive recovery. Please, understand me, it's easier and quicker to reinstall rather try to fix it.

• I tried the clean boot and now the hard drive works simply and screen went black. The mouse still moves around the screen without any outher work keys? That is what it is?

  I tried the clean boot and now the hard drive works simply and screen went black. The mouse still moves around the screen without any outher work keys? That is what it is?

  Hello

  You will need to reverse the clean boot, as it is either incidental compared to
  the real cause of the problem. What, where you try to fix initially using the cleanboot?

  You can access Mode safe? Repeatedly press F8 as you start? If so you can try the configuration - control panel
  The Device Manager - graphics card - Double click on - driver tab - click the driver UPDATE - then
  Right click on the device and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure) is
  CTRL + ALT + DEL and the processes tab find EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Don't forget to make a good backup or
  3.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can do a repair installation that needs to save the data, but you will
  to reinstall the programs. This also requires correct Vista disks especially for OEM versions. You
  will need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - enter a bracket )
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I recently accidentally dropped my laptop and now whenever I try to turn it on, it gets frozen on the screen with the logo of "starting windows."

  * Original title: start Windows 7

  I recently accidentally dropped my laptop and now whenever I try to turn it on, it gets frozen on the screen with the logo of "starting windows." When it disappears, the screen just goes black and nothing else happens. Logins appear not at all. I also tried to run in safe mode and safe mode with networking mode, but it has not loaded yet even to the windows splash screen. I ran Startup Repair 3 times now and he has not yet fixed my problem. I was wondering if it might have been damaged in the fall.

  Probably yes it is damaged in the case otherwise he would start.

• I have an optical mouse wireless portable 3000, the left & right buttons do not work, but the Center wheel works fine. Can someone please?

  I have an optical mouse wireless portable 3000, the left & right buttons do not work, but the Center wheel works fine. Can someone please?

  Hello

   

  You did changes to the computer before the show?

   

  Method 1: Check the mouse on another computer and see if the clicks.

   

  Method 2: See the following article:

   

  Troubleshoot the incidents of the response to the mouse or wireless keyboard:

  http://support.Microsoft.com/kb/838398

• My mouse to walk across the screen

  Why my mouse wander through the screen on its own? It is possessed or something!

  When your mouse for it, it is referred to as calibrate and it's normal! When it happens, the mouse of derivatives usually 5-10 seconds and then must stop on its own. Let the mouse do 'its time '. Fight against the movement of the cursor is only prolong the process!

• Satelite C50D-A-133 - Touchpad not working/mouse not visible on the screen

  My mouse will not be displayed on the screen and the touch pad does not work, it's happened a few times but it still works again in about 20 minutes.
  This time, it has not worked all day. If anyone knows how to fix this please please help.

  I have class that I have to do and it will count for 25% of my grade I have to do and I really need to be able to fix my laptop

  Thank you

  Hello

  Can you please provide some info on your laptop?
  You use Windows preinstalled original that you got with your laptop?
  Have you tried to turn the touchpad on or off using the F key or other hardware settings?

  Have you tested the feature with an external mouse?

• the mouse regularly hangs on the screen

  Mouse freezes on the screen and the computer breaks down regularly. How can I stop this. I am currently running windows XP

  Hello

  1. What is the brand and model of the mouse?
  2. don't you make changes on the computer before this problem?
  3. the mouse works initially after the computer is turned on?
  4. did you try to use the same mouse on another computer and check?

  Step 1: Run the fix it tool in the following article and check.

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/

  Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true
  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true
  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• Why my mouse pointer scrolls off the screen to the right

  Installed a wireless network adapter by using what I think was the wrong driver. Cannot remove properly. At the time my mouse and Window Media Player begins to act. The mouse pointer goes way off the screen to the right and no other borders. Window Media Player opens wider than my screen. That is what it is?

  Hello

  · What is the number and the model of the computer?

  · Have you installed the drivers on the manufacturer's Web site?

  · Do you receive an error message or error code when you try to uninstall the drivers?

  Use the back to roll on the computer that will replace the network to the previous state driver and check if the problem persists: how to use Roll Back Driver Windows XP: http://support.microsoft.com/kb/283657

  I suggest contacting the manufacturer and then install the wireless network card drivers.

• 600-1120: touchscreen: mouse image appears on the screen?

  Hello

  During each action in touchscreen mode, an image of big mouse appears on the screen and then disappears after a few seconds.  Is this normal?

  Is it possible to remove the image of the mouse?

  Thanks for your help!

  I thought that I had seen and heard of all the strange things that could happen, but you came up with a new.

  Here is a picture of what I was talking about:

  

  The "Touch pointer" section is where I thought that the problem can be caused.  At this stage it seems unlikely, however.

  More I think about this topic, it seems that it might be something in the software of Logitech.  You can check with them.  It does not make sense to me that Microsoft or HP would have software that causes this to happen.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Journal of the frozen off the screen

  frozen laptop computer logging off and does not meet all the keys has been so for 12 hours, even after restarting mode 'sleep' on the log off screen

  frozen laptop computer logging off and does not meet all the keys has been so for 12 hours, even after restarting mode 'sleep' on the log off screen

  try to turn off the power by pressing the power button / stop for a few seconds first

• My mouse is shaking on the screen. How can I stop it?

  When I turned on my computer, the mouse was trembling, as would a person if they were nervous.  How can I stop this?

  Hi Debbie,.

  Welcome to the Microsoft community.

  According to the description, it seems that you are having problems with the mouse. I will surely help you this question.

  (1) did you do changes on the computer before this problem?

  (2) what is the brand and model of the mouse?

  Method 1: I suggest the steps to start the computer using safe mode and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 2: I also suggest you to follow the steps from the link and check if it helps.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.