optimization of timing memory HP dv9535nr
CPU - z shows my 4 GB pny (2GBx2) ram is fixed at 5-5-5-15.
I think that is not optimal, so what's the best settings for my computer?
There is no mechanism to reset the memory on one laptop another timings that purchase and install different memory. I'm sorry.
Tags: Notebooks
Similar Questions
-
What is the limit for virtual memory in XP?
I did all the steps and my computer is a memory and it is already 735 and I changed it to 736 how high I can go
* original title - virtual memory how high for Ko mine is 736 *.
If you're referring to the size, you must configure the paging file, I recommend you leave Windows magage it. Generally, it must be set to 1.5 times the amount of RAM you have installed. See links for more information below:
How to set performance options in Windows XP
(see step 2: manually manage computer memory)
http://support.Microsoft.com/kb/308417To change the size of the virtual memory paging file
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/sysdm_advancd_perform_change_vmpagefile.mspx?mfr=trueHow to optimize the virtual memory (swap file) for Windows 2000/XP/2003?
http://www.Petri.co.il/pagefile_optimization.htmI hope this helps.
-
Memory RAS blackBerry Smartphones
is it possible to close all running applications to find the memory outside of the battery system. I also learn that the battery should be removed with the BB market?
Hi and welcome to the forums!
Battery powered pull is a standard procedure, it is a "reboot" as in your PC.
You can close the applications correctly and keep the memory:
Most people close the applications by pressing escape or the red button. This does not close the applications.
Each application has an option CLOSE. For example, if you are in the calendar, press the menu key (spotted) and scroll down to the bottom CLOSE is listed. Go through each application and then press close. Go to the menu press browser and options select cache operations clear all categories and reached escape it will say cleaning memory.
(Your phone may not have this option) Go to options - security - garbage collection - enable. The BB will now clean up the memory when idle for 5 minutes. For memory cleaning make sure you press it, you will have an icon on your screen. Make sure that you use the button CLOSE whenever you're done with an application.
If you follow these steps and face up to your memory, your phone will run smoothly.
Please read the attached articles by JSANDERS AND JCLARK for optimization of your memory.
Thank you
Bifocals
Don't forget to adjust your thread.
Put the check mark in the green box containing your answer! Thank you
-
What are the disadvantages of choosing the 'memory' on the parameter "Performance"?
Hi all. I am working on a project big enough in first Pro CC (on a machine with 32 GB of Ram Windows) with hundreds of media files imported and added to his scenario, with many applied effects, etc. From time to time, I get the windows ' memory low warning "I play/overview of the project in real time.
By changing the memory of the relevant PP affecting 'Performance' to 'Memory' and restart PP which corrects and everything looks pretty good after that (no more "low-memory" warnings).
I would just ask you what are the 'disadvantages' (it takes some for sure!) now working under this new 'memory' facility (and not under the updated and more 'Performance'). This "slow down" all functions of PP or something like that?
Thank you very much!
Some sequences, such as those containing the source high resolution video or still images require large amounts of memory for simultaneous multiple images rendering. These assets can force Premiere Pro to cancel rendering and give a low memory warning alert. In these cases, you can optimize the available memory by changing the preference to optimize rendering Performance for memory. Change this preference in Performance when rendering no longer need memory optimization.
According to the help.
-
How does the library function call Labview? Can I emulate using C++?
Hi all. I recently finished writing a dll CUDA for LabView, and now I'm in the steps of optimization of code, memory management, etc. BUT since my code depends on the entries of Labview (lots of data under types of specific data as table manages and Clusters labview) I can't use the CUDA Profiler or the Profiler VC ++ on the DLL. What I intend to do runs labview and then out of all data entry for the DLL in a binary file and then add an additional function in my code that will read in the binary file, allocate and assign variables to their respective positions, and then call the specific DLL function in Labview. In the end, this miniature function will act as the library function call to my specific group of data entries.
In any case, I started to make this purchase all my data entry of cluster and it comes out in a binary file. And then I started the initialization of the handles of labview, allocating memory and begins to write the binary data in the memory and it works for integers (ints), floats, etc., but I'm confused on how it works with table handles!
Some examples of code:
Sets the Handle for table 1 d for INT
typedef struct {}
int length;
int val [1];
to access the value in a row-online val [Online]
} Array1dInt, * Array1dIntHandle;int main()
{
Array1dIntHandle x = new Array1dInt *;
(* x) = new Array1dInt;ifstream file ('TESTDATAIN.dat', ios: in | ios::binary);
If (file.is_open ())
{
file ((char *) &(*x)-> length, sizeof;)
file ((char *) &(*x)-> val [0], sizeof (int) *(*x)-> length);LabviewSpecificFunction (x);
leader. Close();
} else
{
< "file="" did="" not="" open!"=""><>
}
return 0;
}__declspec(dllexport) LabviewSpecificFunction (Array1dIntHandle x)
{
...
}However, my program crashes when the table is nominally big, and it is expected, because if we look at the Array1dHandle, it has allocated only enough memory to 1 item of value! YET, somehow, in its magical and mysterious labview is capable of making val [1] be val [HOWEVERMANYYOUWANT], even if C++ 101 says that val [1] is a constant pointer, and even if I dynamically allocated memory another somwhere, I would never be able to put these data in this round!
Can you explain, or maybe even write example on how I can fool my program into thinking that the binary code comes from labview, so I can then run my program independent of allowing me to profile the functions inside labview?
I hope that this question is clear and my sample code is also clear, but I'm happy to answer any questions that relate to this.
Thank you all!
I think that I thought about it.
Array1dIntHandle x = new Array1dInt *;
int tempsize;
file ((char *) & tempsize, sizeof;)
(* x) = (Array1dInt *) malloc (sizeof (int) + sizeof (int) * tempsize);
(* x)-> length = tempsize;
file ((char *) &(*x)-> val [0], sizeof (int) *(*x)-> length);Well enough, you will need to make the handle, and then make a new Array1dInt * for him, then read in the length of the array in a temporary variable. Then use this information to then malloc memoery quantity you need for the table and pass this place on the handle. Now the handle will point to the size of the memory and you will be able to access the memory in the format, you've done the handle. Badabing badaboom
-
LabVIEW FPGA Module 2015 Compilation to PXIe7820 with 'no timetable '.
I did a first compilation for the SMU with the Xilinx Vivado 2014.4 tool 7820 (64-bit). Compilation report said.
Compilation successfully completed.
Use of the device
---------------------------
Total bands: 19.1% (25350 4848)
Records of slice: 6.9% (13937 on 202800)
Slice lUTs: 12.3% (101400 12430)
Block of Rams: 0.9% (3 out of 325)
DSP48s: 6.2% (37 out of 600)Calendar
---------------------------
None.Compile time
---------------------------
Introduction date: 16.07.2016 12:48
Date recovered results: 16.07.2016 12:59
Waiting time in the queue: 00:08
Compilation of time: 10:16
-Generate a Xilinx IP: 00:00
-Summarize - Vivado: 04:18
-Optimize the logic: 00:14
-Place: 01:17
-Optimize the Timing: 00:18
-Road: 03:04
"- Generate the programming file: 00:56.This means no timetable? The embedded clock's 40 MHz. It runs with this clock? Beacause 7833 compilations for the pci or pcie 7842 report displays the maximum clock time.
Hello
"none" means simply from what I can understand, that there is no violation of timing. The source of synchronization that will be used is (as you have already suspected it) on-board 40 MHz clock.
As to why you don't get a mention of the MiteClk and the ReliableClk in summary, I think that it is due the 7833 and the 7842 relying on FPGA Virtex-II and Virtex-5, while the 7820 uses the Kintex-7 family. Depending on what type FPGA using different estimates regarding the use of the device and synchronization are not always available.
As I said, as long as you don't get not an error of timing and your compilation is completed successfully, you should be fine.
Kind regards
Alex
-
As I said just, Fuze is not transfer songs.
So far, I have
Of-Auhtorized and re-player...
Same thing for the computer...
Manually updated lisences track on both...
Fortmat peripheral...
Rhapsody of uninstalled and reinstall rhapsody...
Check the updates with Rhapsody...
Check the status of the subscription... say subscription good until 12/11/2008, yet dot is truncated Red?
So basically it connects now - said it's transfer and two stays in messages "download and transfer 1 of...» "and does not change the number OR changes the number, but nothing is transferred on the device and there is another error!
Need help, please everyone! I need to get this device back up and functional for my wife to work in the morning...
Is the best method of Sansafix: formatting the device using the Format command on board.
On the "rocket": settings > system settings > Format > Yes. This will also optimize the device memory.
Connected, select allow again by right clicking on the "rocket".
Bob
-
A new OTA is available to you 7 3740 and 3840 8 owners.
The updates include:
MyDell integration
Integrate the cast of Dell
Improve connectivity Dell Cast
Enable subassemblies: Optimization of memory
The camera driver for the optimization of the memory tuning
Enhance the functionality of front camera zoom during video calls Skype/Hangout
Update FW to provide information CPU
Visitors to China
The LeTV functionality improvement
Improved zoom QQ video call feature
TB
In my view, there is a major problem with the venue 3840 (zoom on Skype problem) and have dealt with him for some time. Totally frustrated by those in India "advancing to their team of concern." I filed a complaint with the Better Business Bureau in Texas. Two days later I received a call from the United States and they agreed a refund request. Dell cannot appreciate me this announcement, but if it can save someone the months of calling their 'technical support' then so be it. I have 5 Dell computers and never had to go through this before. Incidentally after that they agreed a refund request that I kept getting emails from the India telling me they make progress on this issue. I have always trusted blindly Dell in the past and never checked on the low side on Amazon for this product or I would have never purchased.
-
BlackBerry Smartphones Blackberry "BOLD"
Memory - when I look at my memory, I see that my system memory seems to be almost exhausted. I have 89. and the max system is 99, which is stored on the system memory. I didn't save anything him. Help!
Hello and welcome on the Blackberry forums
Read this posted by bifocals
Battery powered pull is a standard procedure, it is a "reboot" as in your PC.
You can close the applications correctly and keep the memory:
Most people close the applications by pressing escape or the red button. This does not close the applications.
Each application has an option CLOSE. For example, if you are in the calendar, press the menu key (spotted) and scroll down to the bottom CLOSE is listed. Go through each application and then press close. Go to the menu press browser and options select cache operations clear all categories and reached escape it will say cleaning memory.
(Your phone may not have this option) Go to options - security - garbage collection - enable. The BB will now clean up the memory when idle for 5 minutes. For memory cleaning make sure you press it, you will have an icon on your screen. Make sure that you use the button CLOSE whenever you're done with an application.
If you follow these steps and face up to your memory, your phone will run smoothly.
Please read the attached articles by JSANDERS AND JCLARK for optimization of your memory.
-
Inbox blackBerry Smartphones / browser homepage
Hi I'm new to BB. Just a few questions:
(1) each time, I get a message notification (either he missed call or a sms alert).
it becomes difficult to navigate in the 'Messages' box: the reason is that it opens
always in the last place where I left it. So I have to press Menu & then scroll down
for 'See the folder' (pressing 'v' also helps) & then it says "select a file".
Now, my request is: someone knows a way that when the "Messages" icon is clicked on
the HOME screen, it all right now that brings me to the screen "Select folder".
(2) how to change the HOME PAGE of the browser.
(3) to extend the battery life, I read that all applications must be closed using the
Option 'Farm' in its Menu. To check what all running applications, a
must check on 'Application Switch' - If you request them, then it's open.
The problem I have is some applications (appearing in mode S/A), I could
Close (e.g., games, etc), but some are not get closed for example: messages, browser,.
BB Messenger.
Thanks in advance.
JS
Hello and welcome on the Blackberry Forums
(1) each time, I get a message notification (either he missed call or a sms alert).
it becomes difficult to navigate in the 'Messages' box: the reason is that it opens
always in the last place where I left it. So I have to press Menu & then scroll down
for 'See the folder' (pressing 'v' also helps) & then it says "select a file".
No, when you have a new message and you go to the message folder, you can see the last place where you left, but if you press T (top) you can see the new messages. (new messages are always in the top and you cannot change it)
(2) how to change the HOME PAGE of the browser.
Open the browser, you are to press menu, options, configuration of the browser, and you can change the homepage on the bottom.
(3) to extend the battery life, I read that all applications must be closed using the
Option 'Farm' in its Menu. To check what all running applications, a
must check on 'Application Switch' - If you request them, then it's open.
The problem I have is some applications (appearing in mode S/A), I could
Close (e.g., games, etc), but some are not get closed for example: messages, browser,.
BB Messenger.
Please read this link to optimize battery and memory
http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB14320
There are five applications cannot be closed
BlackBerry Messenger, HOME, phone, browser and messaging
Thank you
-
Windows 8 hangs and displays your pc encountered a problem and needs to be restarted!
Hello
I have 2 GB of ram on my pc and suddenly destroyed a half GB of ram and now I have 1.5 GB
and since I was 1 .5Go ram my pc crashes after 15 to 20 minutes and showing the blue screen and restart
whenever I use every 2-3 applications at the same time (or) a single application for a long time, it hangs and displays the blue screen and restart!
I have seen that windows 8 shows the minimum ram is 1 GB and windows 8 running on my pc of a friend with only 1 GB with any errors!
Help, please!
These are the programs installed on my pc
and this is using memory for all the 1 sec approximately
and it's my system properties
and I forgot to say that
all the browsers that I use (chrome, mozilla firefox, opera, safari etc...) including accidents to internet explore in the Middle
screenshots of all browsers:
I do not use these all browsers at the same time and they are all not installed in my pc except firefox and internet explore... im showing the crash of the reports that i faced problems with these!
Please help thanks!
I recommend that you set all your disks managed system size rather than nothing. It uses light memory of your orders. I use the optimizer application called memory wise wisecleaner.com to hold my smooth ram.
-
Hello world
I have a little a problem of performance on 12 c that gives me a little trouble at the head. I moved from 11 to 12 databases and no amendment of the application have been made. Our requests are generated somewhat dynamically, so that they are the same thing every time.
Let's start with the execution plan I get:
SQL > select * from table (dbms_xplan.display ());
PLAN_TABLE_OUTPUT
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Hash value of plan: 3567104424
-----------------------------------------------------------------------------------------------------------------------------------------------------------
| ID | Operation | Name | Lines | Bytes | Cost (% CPU). Time | TQ | IN-OUT | PQ Distrib.
-----------------------------------------------------------------------------------------------------------------------------------------------------------
| 0 | SELECT STATEMENT | | 55. 7095 | 3764 (1) | 00:00:01 | | | |
| 1. COORDINATOR OF PX | | | | | | | | |
| 2. PX SEND QC (ORDER). : TQ10006 | 55. 7095 | 3764 (1) | 00:00:01 | Q1, 06 | P > S | QC (ORDER).
| 3. SORT ORDER BY | | 55. 7095 | 3764 (1) | 00:00:01 | Q1, 06 | SVCP | |
| 4. PX RECEIVE | | 55. 7095 | 3763 (1) | 00:00:01 | Q1, 06 | SVCP | |
| 5. RANGE OF SEND PX | : TQ10005 | 55. 7095 | 3763 (1) | 00:00:01 | Q1, 05 | P > P | RANGE |
| 6. UNIQUE FATE | | 55. 7095 | 3763 (1) | 00:00:01 | Q1, 05 | SVCP | |
|* 7 | HASH JOIN | | 55. 7095 | 3762 (1) | 00:00:01 | Q1, 05 | SVCP | |
| 8. PX RECEIVE | | 801 | 50463 | 3696 (1) | 00:00:01 | Q1, 05 | SVCP | |
| 9. PX SEND HASH | : TQ10003 | 801 | 50463 | 3696 (1) | 00:00:01 | Q1, 03 | P > P | HASH |
| * 10 | HASH JOIN | | 801 | 50463 | 3696 (1) | 00:00:01 | Q1, 03 | SVCP | |
| 11. RECEIVE PX | | 801 | 40851 | 2333 (1) | 00:00:01 | Q1, 03 | SVCP | |
| 12. PX SEND BROADCAST | : TQ10002 | 801 | 40851 | 2333 (1) | 00:00:01 | Q1, 02 | P > P | BROADCAST |
| 13. NESTED LOOPS | | 801 | 40851 | 2333 (1) | 00:00:01 | Q1, 02 | SVCP | |
| 14. KIND OF BUFFER. | | | | | Q1, 02 | ISSUE | |
| 15. RECEIVE PX | | | | | | Q1, 02 | SVCP | |
| 16. PX SEND HASH | : TQ10000 | | | | | | S > P | HASH |
| 17. NESTED LOOPS | | 823. 31274 | 1509 (1) | 00:00:01 | | | |
| * 18. TABLE ACCESS BY ROWID INDEX BATCH | PAGED_LOOKUP_PKS | 500 | 9500 | 3 (0) | 00:00:01 | | | |
| * 19. INDEX RANGE SCAN | PAGED_LOOKUP_PKS_IDX2 | 1. | 2 (0) | 00:00:01 | | | |
| 20. TABLE ACCESS BY ROWID INDEX BATCH | BILL_ITEM | 2. 38. 4 (0) | 00:00:01 | | | |
| * 21. INDEX RANGE SCAN | BILL_ITEM_FK2 | 4. | 2 (0) | 00:00:01 | | | |
| * 22. INDEX UNIQUE SCAN | PK_INSERTION | 1. 13. 1 (0) | 00:00:01 | Q1, 02 | SVCP | |
| 23. ITERATOR BLOCK PX | | 1548K | 17 M | 1353 (2) | 00:00:01 | Q1, 03 | ISSUE | |
| 24. FULL RESTRICTED INDEX SCAN FAST | BOOKING_ACCOUNT_1 | 1548K | 17 M | 1353 (2) | 00:00:01 | Q1, 03 | SVCP | |
| 25. PX RECEIVE | | 22037 | 1420K | 65 (2) | 00:00:01 | Q1, 05 | SVCP | |
| 26. PX SEND HASH | : TQ10004 | 22037 | 1420K | 65 (2) | 00:00:01 | Q1, 04 | S > P | HASH |
| 27. SELECTOR PX | | | | | | Q1, 04 | SCWC | |
| 28. TABLE ACCESS FULL | CONTACT | 22037 | 1420K | 65 (2) | 00:00:01 | Q1, 04 | SCWP | |
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Information of predicates (identified by the operation identity card):
---------------------------------------------------
7 - access ("ACCOUNT_ID" ="ACCOUNT_ID")
10 - access ("BOOKING" ="BOOKING")
18 - filter("T1".") SEQUENCE_NO' < 501 AND "T1". ("' SEQUENCE_NO" > = 1).
19 - access("T1".") SESSION_ID '= 123456 AND 'T1'.' SEARCH_ID "= 25)
21 - access("T1".") N1 "=" BILL_ID")
22 - access ("BOOKING" = "BOOKING" AND "INSERTION_SET" = "INSERTION_SET" AND "INSERT"="INSERT")
Note
-----
-the dynamic statistics used: dynamic sampling (level = 2)
-This is an adaptation plan
-2 directives Plan Sql used for this statement
51 selected lines.
Elapsed time: 00:00:00.15
SQL > spool off
OK, now let's go through the problem:
- It's a development running on a virtual server, and which hosts a few other databases, so the parallel execution is not a good thing. parallel_degree_policy is set to MANUAL, parallel_max_servers and all other parallel_ limits are set to 1 and tables have been changed with the settings of NOPARALLEL. So why is the execution plan always generated with all stages of parallel execution? I don't seem to get rid of in 12 c
- Next mystery is that the said plan of the explain command is an adaptation plan, and yet I put the true optimizer_adaptive_reproting_only
- Now to the problem of effective enforcement, so I'm playing around with all these settings. The query runs for 3-4 seconds, returning around about 500 cases. However, in some cases this same query with the same input variable races for hours and if I can believe the AWR and ASH reports, read a good 180 GB of data. The main wait event is direct path read temp temp and writing.
This is not isolated to that one query. I have a few queries now that all display the same behavior, one of them running overnight. I don't seem to get to a standard nested loop execution plans.
The entire base is a database plug-in and I don't know I just missed something in the new features Guide.
Would appreciate some ideas.
Thank you
If you want to disable parallel execution, you must set parallel_max_servers to zero. Maybe the optimizer thinks he can use a parallel plan because parallel_max_servers is non-zero (even though the number of slaves available means that it will be serialized to a parallel plan).
Note that you have a ticket saying dynamic stats have been used. Maybe you have a 11 for optimizer_dynamic_sampling setting, and allowing Oracle to be very inventive with collection of samples and parallelism.
You have also 2 SQL instructions in game. These are the things that get associated with objects rather than the instructions, then perhaps someone has been playing with parallelism and managed to associate the parallelism with one of the tables in your query (I am not sure 100% that it is possible, just throw a suggestion). Take a look at the SQL used for education guidelines.
To give us a little more information, you can:
Shoot memory execution plan dbms_xplan.display_cursor ({sql_id}, {number of children}, 'ALL'));
We show all the parallel settings (see setting the parallel)
Pull on the parameters of the optimizer for query memory (select name, value of V$ sql_optimizer_env where sql_id = {your sql identifier} and child_number = {your child number})
Concerning
Jonathan Lewis
-
Hello
I know that Flash Cache is slower than RAM, but can we say that doesn't cache smart flash the same work as the Oracle TimesTen Database Cache?
Wrong or right?
Thank you very much for helping me in my understanding.
Edited by: 905160 Dec 30. 2011 00:58Bad :-) Smart Flash Cache is still in the storage layer and so does nothing to eliminate the code path heavy of a disc centered on the RDBMS. One of the main advantages of TimesTen is there a short circuit code path a lot thanks to its simple design and optimizations in the memory. There is a large part of the improved source performance. Also smart flash cache does not all access operations, but only those that use the smart cache.
Smart Flash Cache is a great way to help the performance of a focused database on disk and it is used wisely in the Exadata buffer. But you should consider not equivalent to, or a substitiute for, cache TimesTen in-Memlory database. These are very different things, work very differently from each other and offer different benefits.
Chris
-
Leak memory in real time caused by VISA Read and timed loop of data nodes? Is not supposed.
In collaboration with LV 8.2.1 in real time to develop applications that monitor or emulate computers on bus RS-422. The following screenshots have been taken an application that monitors a transmission of 200 Hz. After a few hours, the PXI station would break a range impressive messages angry... most involving something about memory loss. After much hair pulling and passing money, my partner has discovered while looking at the available memory on the controller of loss of memory occurred at each loop containing a VISA read and propagation of error using the data nodes (see Leak.jpg of memory). He concluded that if he went to the propagation of the error to the regular old shift registers, then the available memory was rock-solid. (has the Leak.jpg of No memory)
Any ideas of what could be the cause? Do you see not any problem with the way that we code these kinds of loops? We always strive to optimize the way in which we use the memory on our urgent requests and VISA readings and DAQmx bed give us the heartache more than ever, we are able to allocate memory for these screws some tips?
Dan Marlow
GDLS
Hi thisisnotadream,
This problem has been reported, and you seem to be exactly reproduce the conditions required to see this problem. This was reported to R & D (# 134314) for further investigations. There are several possible solutions, of which one is the one you have already found the wiring error directly in the loop. Other situations which give rise to no memory leak are:
1 if the bytes of the property node port is not there and has read lies in each iteration and time-outs resulting are ignored.
2. If the structure of the deal is gone and just blindly check the bytes to the port and read each iteration.
3. If the timed loop is transformed into a while loop.
Thanks for the comments!
Kind regards
Stephen S.
-
Optimize the creation of table 2D for the use of memory and parallel processing
I have, and application of data processing that requires generating a large matrix 2D with sin and cos values that must be updated constantly. It's my program in terms of speed and memory use and I want to optimize to the maximum the neck of the bottle. This is my current code:
I tried to paralellisme iteration in the loop for to take advantage of the multi-core processor, but with shift registers I can't do. Also, I read that with in place element, structures I can reduce the memory usage, but don't know how to do this with a 2D array. This code can be optimized to improve the use of memory and speed?
Maybe you are looking for
-
Save the transitions as elements?
I have a bunch of movies that will need the same transitions intro and outro, is there a way to save the transitions as an element so I can just copy and past them in quickly? Thank you.
-
I have 2 plugins that will not be updated. Why is this?
Ever since a few updates ago, 2 of my plugins, which are very popular, will not be updated. I get an error of initialization of the Application for the two. They are Adobe Flash Player and Adobe Reader. Thank you!
-
HP 15-f305dx: white "smear" appeared on the screen
Hello. My neighbor has a new (pronounced November 3, 2015 at Amazon) HP laptop that has developed the White streaks on the screen a few days ago. Amazon return policy says that the return period has expired. Looks like she's out of luck. Can anyone h
-
Y570, update of the graphics card.
So I was wondering if its possible to upgrade my y570 1 GB 555 M 2 m 555 GB. If not then why Thanks in advance.
-
You can set up Microphones in the speech of the Options in the Panel?
In Control Panel the speech Option does not display anything on the configuration of my microphone.