Option-click for the clone stamp does not. I've tried several suggested fixes, no results. Help!

Similar Questions

• Clone Stamp does not work during the operation of frequency separation.

  Spacing of the frequencies for the first time by train.  I finished the layer of tone and now works on the texture, but the clone stamp does not work.  I have the linear light value layer and the stamp tool is set to 'active layer '.  The stamp tool is gray in the Middle, as if I were seeing a "high pass sharpening" layer through the center of it.  Tried to save the doc and the reopening, but none here.  Any other ideas?

  -Jeff

  In fact, I restarted Photoshop and it works properly now.  Thanks for the information on how to best to post a question.  I'll remember that next time!

• The clone stamp will not work in AE CC

  When I click on the Clone Stamp tool, nothing changes and I'm unable to use the tool. The symbol of the clone stamp becomes highlighted, but the cursor does not change from a circle above the image and just like an arrow. When I try to sample an area by holding the alt/option key, nothing happens and I am unable to do anything. Someone at - it assistance for this problem?

  The Clone Stamp tool works in a source layer, not the Viewer window window main comp.  Double click on your layer target in the timeline panel to open the display layer source code.

• Clone Stamp does not work properly

  Hello world

  After the installation of the cc 2015 clone stamp does not work correctly. By selecting the duration / constatnt, align and block the time source, the brush is applied to the first image and what follows is not present. Its a very big bug for my work. someone knows something?

  THX

  Nicola

  TheSpecialEffectsGuys wrote:

  Yes, that's what we ALL want, but adobe won't let you back.

  What? This is patently false. Not only you can install ALL versions of AE all the way back to CS6 (see here to learn how), but CC 2015 project files can be opened in 2014 CC without having to convert them.

• Re Windows XP: At the opening of the hearts, the window is very small. How can I increase the window to fill the screen. Double click on the top panel does not work.

  Re Windows XP: At the opening of the hearts, the window is very small.   How can I increase the window to fill the screen.   Double click on the top panel does not work.

  Hi Rosa,.

  The size of the window for Hearts is actually design in Windows XP.

  However, there is a solution. You can follow these steps:

  
  Step 1

  a. first of all, copy the game.

  b. click Start, all programs, games.

  c. right-click on the game of hearts .

  d. Select Properties from the list.

  e. press the button find the target on the next window.

  f. right click on the highlighted file and select copy.

  g. then paste the copy on your desktop.

  h. right click on your desktop.

  i. Select Paste from the list.

  Step 2

  Finally, we will change the resolution for the game setting:

  a. right click on the game you just pasted on your desktop.

  b. Select Properties from the list and click the Compatibility tab.

  c. put the check box marked "run in 640 x 480 screen resolution.

  d. now whenever you want to play, click on that game on your desktop and it opens in mode full screen using the widest possible cards and numbers.

  Hope the helps of information.

• in the APEX by clicking on the link hyper does not trigger session timeout page

  Hi all
  I have a question about the application of APEX session time-out. I created a simple application of the APEX. In the region report SQL section, I have code like this:
  
  SELECT DOC_Name, DOC_URL,
  "" < a href = "" | DOC_URL | "target ="_blank"/" > download < /a > ' pdf_link
  FROM test_table
  where emp_number = 00010001
  
  When the user click on the hyper link, it will show the landing page for the user (for example if DOC_URL = 'http://forums.oracle.com', it displays the oracle forum page in a new browser).
  
  But the problem is that after the user session timeout (I set to 240 seconds through shared components > change the security attributes, I put max the session for example 240 seconds timeout) when I click on this hyperlink, it does not raise my session timeout page and it still shows the page (oracle forum page).
  
  Why in the APEX by clicking on the link hyper does not trigger page session timeout after the user session timeout?
  
  How implememt or fix to trigger the session timeout page after clicking on hyperlinks?
  
  (BTW, our version of the APEX is 3.2)
  
  Thank you!

  Hello

  rather than use your my_stored_procedure you could call a new APEX page where you have a page called P999_PDF_ID. On this new page you would have
  treat a front header PL/SQL with the same code you have in your "my_stored_procedure". The only change would be to add a

  apex_application.g_unrecoverable_error := TRUE;
  

  at the end of your code as well as APEX does not generate a standard page of APEX.

  That's all. If a user clicks on a link, APEX will check the session timeout and if everything is ok, download your PDF file.

  Concerning
  Patrick
  -----------
  My Blog: http://www.inside-oracle-apex.com
  APEX 4.0 Plug-Ins: http://apex.oracle.com/plugins
  Twitter: http://www.twitter.com/patrickwolf

• HP - 15 af008ax: my new laptop usb port for the left side does not, only 1 work on 3 Please help me

  My new laptop usb port for the left side does not, only 1 work on 3 Please help me

  Hello:

  Have you installed the drivers for W7 32 bit amd chipset?

  If this isn't the case, you must install them and reboot the PC to get the 3 for usb ports work.

  You want the first file on the Web page.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2032

• Windows 2008 Server: unable to update the password. the value provided for the new password does not respect length, complexity, or history of the field requirements

  Unable to update the password. the value provided for the new password does not respect length, complexity, or history of the field requirements

  Hello

  I suggest you to send your request in this forum for better support.
  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• I can't send an attachment from my email whice is an overview, but when I click on the attachment it does not bring the browser window

  When I click on the attachments it does not have a window to be able to navigate to my files

  Hello

  You also have another question in these Forums on your e-mail problems.

  They can be connected:

  Here is a link to your other question:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/when-i-try-to-send-an-email-i-get-this-msg-the/a8333fe9-cda8-49bc-A4E7-f8756a3086fc

  See you soon.

• Why lightroom 5.7.1 patch for the dvd version does not support the Elimination of fog and the internet the trial version only?

  Why lightroom 5.7.1 patch for the dvd version does not support the Elimination of fog and the internet the trial version only?

  I have the dvd of my camera samsung nx3000 and got version and upgrade to 5.7.1 (high-end) and it is not the removal of the trial version of lightroom download creative cloud fog. How to get this tool software mi?

  Hi nicoa,.

  Dehaze feature has been introduced in the version of Lightroom CC2015.1 and is not a part of 5.7.1 version which is the previous version.

  If you need the dehaze feature, you must subscribe to plan creative cloud so that you use the latest version of Lightroom.

  Kind regards

  Claes

• my toolbar (for the PDF edition) does not appear in a newly opened PDF file. What is the problem?

  my toolbar (for the PDF edition) does not appear in a newly opened PDF file. What is the problem?

  Hi Joanne,

  If you are unable to display the toolbar by choosing View > show/hide > elements elements toolbar, please send along a screenshot of what you see. (And just double check that you open your PDF files in Acrobat and not player - that is a mistake that I make here and there).

  Best,

  Sara

• my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

  my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

  You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

  Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

  Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

  Step 1

  VSearch malware tries to hide by varying names of the files it installs. It regenerates itself also if you try to remove it when it is run. To remove it, you must first start in safe mode temporarily disable the malware.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for other instructions.

  Step 2

  When running in safe mode, load the web page and then triple - click on the line below to select. Copy the text to the Clipboard by pressing Control-C key combination:

  /Library/LaunchDaemons

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.

  There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. Files that belong to an instance of VSearch will have the same date of change for a few minutes, then they will be grouped together when you sort the folder this way, which makes them easy to identify.

  Step 3

  In the LaunchDaemons folder, there may be one or more files with the name of this form:

  com Apple.something.plist

  When something is a random string, without the letters, different in each case.

  Note that the name consists of four words separated by dots. Typical examples are:

  com Apple.builins.plist

  com Apple.cereng.plist

  com Apple.nysgar.plist

  There may be one or more items with a name of the form:

  com.something.plist

  Yet once something is a random string, without meaning - not necessarily the same as that which appears in one of the other file names.

  These names consist of three words separated by dots. Typical examples are:

  com.semifasciaUpd.plist

  com.ubuiling.plist

  Sometimes there are items (usually not more than one) with the name of this form:

  com.something .net - preferences.plist

  This name consists of four words (the third hyphen) separated by periods. Typical example:

  com.jangly .net - preferences.plist

  Drag all items in the basket. You may be prompted for administrator login password.

  Restart the computer and empty the trash.

  Examples of legitimate files located in the same folder:

  com.apple.FinalCutServer.fcsvr_ldsd.plist

  com Apple.Installer.osmessagetracing.plist

  com Apple.Qmaster.qmasterd.plist

  com Apple.aelwriter.plist

  com Apple.SERVERD.plist

  com Tether.plist

  The first three are clearly not VSearch files because the names do not match the above models. The last three are not easy to distinguish by the name alone, but the modification date will be earlier than the date at which VSearch has been installed, perhaps several years. None of these files will be present in most installations of Mac OS X.

  Do not delete the folder 'LaunchDaemons' or anything else inside, unless you know you have another type of unwanted software and more VSearch. The file is a normal part of Mac OS X. The "demon" refers to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.

  If you are not sure whether a file is part of the malware, order the contents of the folder by date modified I wrote in step 2, no name. Malicious files will be grouped together. There could be more than one such group, if you attacked more than once. A file dated far in the past is not part of the malware. A folder in date dated Middle an obviously malicious cluster is almost certainly too malicious.

  If the files come back after you remove the, they are replaced by others with similar names, then either you didn't start in safe mode or you do not have all the. Return to step 1 and try again.

  Step 4

  Reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

  ▹ Safari preferences... ▹ General

  and click on

  Set on the current Page

  If you use Firefox or Chrome web browser, remove the extensions or add-ons that you don't know that you need. When in doubt, remove all of them.

  The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

  Step 5

  The malware lets the web proxy discovery in the network settings. If you know that the setting was already enabled for a reason, skip this step. Otherwise, you should undo the change.

  Open the network pane in system preferences. If there is a padlock icon in the lower left corner of the window, click it and authenticate to unlock the settings. Click the Advanced button, and then select Proxies in the sheet that drops down. Uncheck that Auto Discovery Proxy if it is checked. Click OK, and then apply.

  Step 6

  This step is optional. Open the users and groups in the system preferences and click on the lock icon to unlock the settings. In the list of users, there may be some with random names that have been added by the malware. You can remove these users. If you are not sure whether a user is legitimate, do not delete it.

• Cannot migrate VM between 5.5 ESXi versions: the version of the product to the destination host does not support one or several CPU features

  We receive an error message that I am trying to make sense. I understand very well the notion of compatibility, CPU, CPUID, masking and so on, after working on a competitor hypervisor. However, this error seems wrong (or needs better wording) based on my understanding:

  Here is the message:

  ----

  A general error occurred: the version of the product to the destination host does not support one or several features of the CPU currently use by the virtual machine.

  Characteristics of CPUID level 0 x 1 'ecx' register are indicated with a '1' bit: x00x:xxx0:xx0x:x 000: x 0 11xx:00: 00xx:11xx

  ----

  
  

  This happened during the migration between two hosts ESXi with the same physical processors - in this case, a Westmere X 5650.

  
  

  The source host is on ESXi build 2068190 (5.5). The destination host is on ESXi build 1474528.

  
  

  The bits it seems to complain are:

  
  

  DTES64

  Monitor/MWait

  Cx16

  PDCM

  The punch line seems to be: "the product version of the destination host. However, I have trouble believing that support for these features have been added to ESXi between the two versions. If it were, VMware has been certainly silent about.

  For what it's worth, explicitly set us the CPUID masks in our virtual machines (no, CVS is not an option for us at this time.) This is the mask:

  CPUID.1.EAX = "00000000000000100000011001010001".

  CPUID.1.ECX = "00000010100110001110001000111111".

  CPUID.1.EDX = "10001111111010111111101111111111".

  CPUID.80000001.ECX = "00000000000000000000000000000001.

  CPUID.80000001.EDX = "00101000000100000000100000000000".

  cpuid.d.EAX = "00000000000000000000000000000000".

  cpuid.d.ECX = "00000000000000000000000000000000".

  cpuid.d.EDX = "00000000000000000000000000000000".

  Note that the bits of the message complains (2, 3, 14, 15) * are * in fact forced to '1' in our mask of cpuid.1.ecx. That means (if I understand correctly), ESXi does not have the virtual machine unless the host processor supports the feature. And in our case, the virtual machine will start with happiness on nodes, with both versions. It will be not simply migrate between them.

  So, long story short, is this a bug of ESXi? The error message is misleading? I understand something?

  Thank you

  
  Matt

  To use the masks feature VM in this way, you must replace all the 1 to your masks with-'s:

  CPUID.1.EAX = "00000000000000-000000 - 00-0 - 000-

  CPUID.1.ECX = "000000-0-00--000---000-000---".

  CPUID.1.EDX = '-000 - 0-0 - 0-

  CPUID.80000001.ECX = "0000000000000000000000000000000 -"

  CPUID.80000001.EDX = "00-0-000000-00000000-00000000000.

  cpuid.d.EAX = "00000000000000000000000000000000".

  cpuid.d.ECX = "00000000000000000000000000000000".

  cpuid.d.EDX = "00000000000000000000000000000000".

  Zeros erases the features that are not available on your hosts Westmere, and dashes will leave the other one features.  The problem with those masks was forced to you certain features on who would have normally been off.

• When I drag the current time indicatorin the timeline the video preview does not work. How can I fix it?

  When I drag the current time indicatorin the timeline the video preview does not work. How can I fix it?

  

  Which turns off.

• The sketches app does not open, it tries then crashes... Several projects are being developed

  The sketches app does not open, it tries then crashes... Have several projects under development... Any suggestions?

  Hi Brian,.

  Really strange. Try to uninstall and reinstall the application.

  Let me know how it goes.

  Sue.