Option - First CC 2014 video rendering

Similar Questions

• First moments of video rendered as just a black screen - first Elements 9

  Hello

  I am putting together a short demo clip, 8 seconds of a particular moment of my project on first Elements 9. The section has two clips that have been taken separately, but are cut in half with the function of the harvest, so that they both play on the screen at once. There is also a position and brightness of one of the clips settings to ensure they match.

  However, I started seeing strange behavior when I try to make the clip and as so far I have not been able to get a usable copy. When rendered as a .wmv, one of the two clips is inexplicably cropped down to about a quarter of the height of the stage, despite being not not in the editor. In addition, when rendered in the form of an MPEG format I would prefer the file in, even if I don't get the first problem I have a question where executives from 20 to 23 first video won't play in an external video player. I also tried good windows media player and VLC. Instead, the section of the video appears as either a black screen, a black screen with a white line on it, or, if the video timeline scroll at the beginning, the last displayed image. The clip of the music that accompanies the video however still plays during this section, and the error is not seen at all in the editor. Oddly enough, if one of the files of rendering is re-imported in first Elements 9 and played in error, 20-or-so executives will play indeed. It seems that the editor of Premiere Elements that can play these frameworks.

  I am quite at a loss here. I doesn't bother me too much not to be able to export as .wmv, as it is not my first choice, but if someone could help me with the rendering of MPEG, I would be very grateful.

  The source files are AVCHD (.mts) files at a resolution of 1440 x 1080. There is only a 'change of clip"to the point where the video become visible again, but that's just where I divided the same clip to make a change of brightness, as I have several times in the video also.

  Thanks for any help,

  Black.

  I found a solution in entering all the clips in the project and dragging about 3 seconds in the timeline, leaving a few seconds of black space that I can cut easily.

• Encoder Media ceases at the end of the (first CC 2014) video coding

  I've finished editing a video (a little less than 4 minutes). When I try to export to a file of windows (HD 1080 p) media it always stop coding at all about the 50% mark.

  • I tried to export to a shared network drive and the hard drive local, with the same results.
  • I updated: Mercury Playback Engine software only
  • I tried to export directly from first and Media Encoder.
  • I looked where it stops during the export of the encoder through the preview window. It seems to happen at the end of the video and stops right where I melted white and the music ends. The interesting part it the timer indicates 50% left to complete
  • He don't plant... it's just there with increasing timer and never continued
  • I do not plug-ins.
  • To the point where it stops, I have a 'Dip' transition to white on a music video and no audio transition applied to the soundtrack since it ends well with video.

  Please let me know if there is anything else I can / should I explain to get help. Thank you very much for your help.

  System details:

  Operating system: Windows 7 Professional 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.140303) - 2144

  Language: English (regional setting: English)

  Manufacturer: Hewlett-Packard

  System model: HP Z230 Tower workstation

  BIOS: Default system BIOS

  Processor: Intel Core i7-4790 CPU @ 3.60 GHz (8 CPUs), ~3.6GHz

  Memory: RAM 16384MB

  Available OS memory: 16070MB RAM

  Card name: Intel(r) HD Graphics 4600

  Manufacturer: Intel Corporation

  Chip type: Intel(r) HD Graphics Family

  DAC type: internal

  Display memory: 1 696 MB

  Dedicated memory: 64 MB

  Shared memory: 1632 MB

  Current mode: 1920 x 1080 (32 bit) (60 Hz)

  Peferling... I have a positive update! I went to the area that usually makes things die. I noticed that it was the end of queue where I inserted a sequence in another sequence. I also noticed I had three tracks in this article with graphics. So I copied all the tracks in the sequence inserted... then removed the inserted sequence and re-inserted tracks real. At this point I had more an inserted sequence. Then, I simplified the three titles of graphics into one. Again my transitions and final tweaking. I tried once more export as H.264 HD... and voila! It worked! Something must have been breaking.

  For now, I agree and have been able to export in other formats. I want to thank you very much for your comments. Best regards, Nelson

• Updated for first CC 2014 - now get boot error - could not find capable video game modules

  I have a MacBook Pro with NVIDIA GeForce GT 750 M 2048 MB retina end 2013.

  Since the update of the first CC 2014 on the launch, I get this error just after it shows the loading of "ExporterQuickTimeHost.bundle" (I tried to delete it, but he always did, so I don't think that it has nothing to do with the QuickTime plugin):

  Adobe Premiere Pro startup error

  Adobe Premiere Pro has not found all capable video game modules. Please update your video display drivers and start over.

  I never had it in the CC version. I have the latest version of the CUDA driver: version 6.0.46 & Driver GPU: 310.40.35f08 version 8.26.21

  The computer is unusable for about 4-5 minutes after it produces until it clears all the way to the top. This whole process takes up to 7-8 minutes!

  This same thing happens also with Prelude CC 2014.

  If anyone knows what's going on I would be very grateful.

  Thanks, Maz

  I found a solution that worked for me. Seems to be a permissions issue. Here is the solution I found (found here: CC 2014 startup problems: Adobe Premiere Pro):

  In the finder menu, click and hold down the menu REACH. That hold the option key and the library user will appear. Click on the user's library.

  In this folder, go to preferences and find the adobe folder.

  Right-click on the adobe folder and click get info.

  In the permissions section, & sharing, there are three names.

  Everyone should say read & write beside them.

  Open the lock, turn all to read and write.

  Then click on the little train directly under the names or to the left of the lock and the menu drop down click on 'apply to the included items.

  Then relock the lock.

  Now, go to your OS hard drive and click on users, your user name, Documents.

  Find the adobe folder there.

  Right-click on the adobe folder and click get info.

  In the permissions section, & sharing, there are three names.

  Everyone should say read & write beside them.

  Open the lock, turn all to read and write.

  Then click on the little train directly under the names or to the left of the lock and the menu drop down click on 'apply to the included items.

  The lock, the lock again.

  Wait a minute. Then launch first.

  This fixed it for me.

• green flashes when rendered in first CC 2014

  Hello

  I'm an in-house cameraman and the editor of a financial firm in London. I use the last Macbook Pro retina with 16 GB of ram, graphics NVidia 750. I uses the same method for the installation of the last two years but have barely begun to edit with the latest version of the first cloud 2014. I mix PM-100 and Sony EX1 images I've done several times before. However I spend hours trying to get rid of green flashes who made their appearance on the renders.

  These seem compatible with the use of the PMW-100 as the EX1 film seems ok. I can replace the clips of error with something else, but the rendering error then moves to another part of the record.

  These flashes are invisible in reading within the editor, after having made.

  I am trying to establish if it is the camera, camera drives, Macbook Pro retina or first.

  Can anyone help to shed light on this?

  Andy

  I was having the same problem and could not find a solution. He was also screwing some effects, including stabilizing of string every time that I've made or exported. Finally, I tried to change the rendering engine of acceleration GPU Mercury Playback Engine (Open CL) with Mercury Playback Engine Software only, and it worked like a charm. Browse to the file->-> General project settings and select the rendering in the menu engine drop-down. Make sure you also change the rendering engine when you export. Using Adobe Media Encoder, don't forget to select "Mercury Playback Engine software" only in the dropdown next to "Renderer" before exporting.

  It has completely eliminated the problem for me.

• ADOBE FIRST CC 2014 8.1 cannot open the CINEMADNG

  When I opened a CINEMADNG files with first, it gives me an error. The files are not recognized by the first.

  But I can open them with consequences. So I the FIRST CC 2014 8.1 the ACCOUNT holder should be here...

  What I am doing wrong?

  Hey Joe,

  Before you import the file, please go to file > Project Settings > General and change Video Renderer software only Mercury playback engine. Click OK , and then select Remove previews. Then, import the file and see if it still crashes.

  Thank you

  Regalo

• iMovie; Video rendering error 60

  I am trying to share a project to My Documents in iMovie to youtube, but when I try to share the images (720 p, 60 fps) it will always fail to export and share telling me there video rendering error 60. I think it all started when I downloaded Mac OS Public Beta 7 sierra because I didn't have this problem before this date. Also, I don't think it's a problem of space because I have almost 60 GB of free space. Do you have any suggestions?

  This error means that there is a problem with the media. You can browse the project frame and see if you see a glitch. This is only possible if it is a relatively short project. Another option is to replicate the project open in the timeline panel and remove half of it and see if that will share. Keep the course of this process until you find the problem.

• How can I reinstall first CC 2014?

  I recently upgraded to 2015 CC and made the error to allow Cloud creatives replace the CC 2014 applications.  I'm having a lot of problems with the first 2015 and would like to re - install first CC 2014 until Adobe fixes the problems related to 2015.  There is no option to do the "Previous Versions" tab of Creative Cloud.

  RPCO

  Rpabst,

  Please visit these links for more details on how to install a version of previoud:

  reinstall earlier versions

  Install an earlier version of any creative cloud application

  Guinot

• I had many problems with the first cc 2014 so I reinstalled it and now it says that I can not open my project because it was recorded on a newer version. Is there something I can do?

  I had many problems with the first cc 2014 so I reinstalled it and now it says that I can not open my project because it was recorded on a newer version. Is there something I can do?

  Hi Gemma,

  It seems that after reinstalling, Premiere Pro no has not been updated to the latest version. Check your application creative cloud for updates. If she says Premiere Pro is up to date, try to update Premiere Pro through help > updates... option in Premiere Pro.

  Thank you

  Regalo

• First CC 2014 plays do not clip or timeline with the new Mac Pro end 2013 D700

  I used the cs5 and cs6 first and never had this problem

  I just bought a new mac pro and installed the trial of first cc 2014

  I put my script to import the clips as usual, and the play button does not work

  in the viewer or in the timeline panel.  May seem nothing to operate

  also, I'm on 10.9.5 which I guess should be good.

  Hi Ernie,.

  Try this: create a new user with administrator privileges and see if you can get Premiere Pro for video playback once more.

  Thank you
  Kevin

• Audio has not transferred in the chronology of the sequence first CC 2014 of the source window.

  Audio has not transferred in the chronology of the sequence first CC 2014 of the source window. Video, appears on my calendar, but my stop audio added on my calendar. I had no problems in previous projects. I'm new to the Prime Minister, so if it is a question of rookie.

  Thank you

  Dave

  Source Patch A2 on the left and uncheck the A1. See the red square. Targeting of the track as if it were now is used to do.

  Learn all about source patch and track targeting.

  Adobe Premiere Pro help. Source patch and the targeting of the track

  

• Error - 50 video rendering?

  I made a small video in iMovie and it won't let me export it? Whenever I have try to export it to my office and in the library function, it comes up with a message "video rendering error - 50". " I exported literally just a video not long before trying to export it and it worked without a single problem, everything was simple and smooth sailing. Then I try to export it and it does not work? I tried all night to fix, I don't know what to do.

  This means that something in the project is corrupted.  Often, select all in the project calendar and then select copy and paste into a new project will solve the problem.

  Geoff.

• Windows XP, Skype 5.0, Logitech Pro 9000 Webcam, video error: "cannot start video renderer. Make sure you have a valid installation of DirectX.

  Everything has worked out well until the Skype 5.0 download.  Since then, the video does not appear on my screen and displays the following message: "cannot start video renderer. Make sure you have a valid installation of DirectX.

  The driver is up to date and I have DirectX 9.0 c v.

  Thanks in advance for your help.

  Hello.  After several back-and-successive, customer relationship Skype sent me the link depending on where you can get an older version of Skype (4.2.0.187) and many other software if you need. http://www.oldapps.com/Skype.php  I installed it and the audio and video are working as it should with the Logitech Webcam Pro 9000 and Windows XP.

• It's a way to link two or more computers that are running Windows XP as a whole so that tasks of extensive treatment such as video rendering work faster?

  I work as a student employee in the office of Computing Services from Ag Econ Oklahoma State University and would be able to use the unused processing capacity of our networked computers to speed up the rendering of the video on a main workstation.  Is there a relatively simple way to do this?  All of the computers that I want to use for this task are running Windows XP.

  Hello Gavin R,.

  Thanks for visiting the site of the community of Microsoft Windows XP. The question you have posted is related to video rendering and would be better suited to the TechNet community. Please click HERE to find a community that will provide the support you want.

  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Bug Video Renderer increased - where do I report it?

  I found a bug in the Enhanced Video Renderer when used with DirectShow.

  If I use the IGraphBuilder::Connect to connect some pin from the source to the input pin was, and then immediately call IPin::ConnectedTo, then connected sometimes returns VFW_E_NOT_CONNECTED.

  I check the result of IGraphBuilder::Connect, and he succeeds. Also when I insert a loop to try again with a Sleep (1), the second attempt usually succeeds (and I have * never * seen the third attempt fail until now)!

  So I'm sure it is a bug, and I would like to report it. However, I don't find a place where I can report bugs Windows SDK or Core.

  Can you tell me what I need to do to post this?

  I have this problem, since the work of new attempt-loop bypass, so I of course won't open a ticket paid for it. However, I think it should be fixed.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it