Options expenses, but are not accessible. Unusual small box described in the Center. Win 10 64 istalled operating system. Have you tried disableing extensions.

Similar Questions

• BEFSR41 appears in ipconfig, but are not accessible

  Hello.

  Problem is described in the title. Just bought this new linksys router after reset my netgear router whenever I used a p2p program cause I've heard of linksys is "better". Now what? The configuration is very strange alrdy and it won't work at all.

  Have a SmartBox of T - Com, this router and a DSL Modem from Arcor. Before that everything works perfectly with Auto IP.

  Now my PC (2) is connected to the router and all two get their own IP address and the router appears as gateway 192.168.1.1, but it is not accessible, with this configuration on the CD for beginners, nor with the mask of browser.

  However, if I use the CD and it seems to scan my system, a bad LAN connection symbol will blink in the taskbar.

  It seems that the router is not completely broken, LEDs do not show anything out of use as well, but something is wrong.

  Any ideas?

  PS: I know there are tons of similar problems in this forum, but I have not found any case solved...

  O.K. Your modem assigns IP addresses inside 192.168.1. *. In addition, you have a PPPoE connection. I assumed that the modem is a modem/router device hybrid is smart enough to do a crossfeed PPPoE if you do a PPPoE connection.

  Otherwise, it could also be that your modem also has a USB port through which you establish a direct PPPoE connection. If your modem has a USB port not in use. If you want to use the ethernet port on the modem to make sure that nothing is connected to the USB port on the modem.

  I suggest that you test the following:

  1. disconnect the BEF of other devices. The son of a single computer to the BEF.

  2. open http://192.168.1.1/ and change address local IP of 192.168.1.1 to 192.168.2.1.

  3. on the same page change auto/DHCP internet connection for PPPoE settings. Enter your user name and password needed.

  4. now save the settings. You will lose the connection. The router reboots with the new IP 192.168.2.1. Open a command prompt window and type "ipconfig/release *" followed by "ipconfig / renew *" or restart the computer. The computer now get an IP 192.168.2.100.

  5. open the web interface of the router on the new address http://192.168.2.1/

  6. now wire the ethernet port of the modem to the internet port of waiting for a while. Click the router status page and check whether it connects or not. If it does not connect and see if it changes anything, or if you get an error message, press the button connect.

  If it connects, and you see an IP as the 89.*. *. * you saw in the ipconfig/all command in your last message, then you must have an internet connection now.

  7 if it does not and you do not get an IP address on the internet connection, try changing the type of internet connection to DHCP/auto on the main configuration tab. Save the settings. Return to the status page and check if you get a 192.168.1. * IP address as the internet IP address. If you get this IP address, check if your internet connection is working now or not.

• How do I reopen it the status bar and the menu bar, I accidentally turned off one of them and now they are not accessible by right-clicking anywhere on the browser

  If you right click on the bar at the top of the page in the browser, you can check and uncheck what bars appear. I accidentally disabled something there and now when I click I can't get any menu to double-check my menu on the right, State bars so that they are visible. Currently they are not visible, I have no way to move or change settings.

  OK, got it fixed, I kept fishing around this site and found an answer. Press the Alt key and the menu bar appear temporarily, long enough to restore the bar to be visible.

• try to install iTunes on my windows 7, but get windows installer services are not accessible... pls help

  try to install iTunes on my windows 7, but get windows installer services are not accessible... pls help

  Transfer your question here: http://social.answers.microsoft.com/Forums/en-US/w7programs/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00. All options are not enabled. How can I change the time, updates are made? __

  I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00.  All options are not enabled.  How can I change the time that updates are made?

  Hi imoffshore,

   

  Welcome to Microsoft Answers Forums.

  We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

  ·         When was the last time it worked?

  ·         Remember to make changes to the computer recently?

  ·         You have security software installed on the computer?

  ·         You get the error message?

  When you open the tab automatic updates in the control panel or My Computer property sheet, all options of configuration of the automatic updates may be grayed out. This happens due to one of the following reasons:

  1. You are not logged as administrator (or equivalent)
  2. Strategy of automatic updates is enabled
  3. Automatic updates (and Windows Update) access is blocked by group policy

  The options available for automatic updates.

  You must make some changes in the windows registry.

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  • Click Start, run and type REGEDIT to . EXE
  • Go to this location:

  HKEY_LOCAL_MACHINE-SOFTWARE-policies-Microsoft-Windows------WindowsUpdate------AU

  • In the right pane, delete the two values AUOptions and NoAutoUpdate
  • Go to this location:

  HKEY_CURRENT_USER-SOFTWARE-Microsoft-Windows-CurrentVersion------policies------WindowsUpdate

  • In the right pane, delete the DisableWindowsUpdateAccess value

  Using the Group Policy Editor - for Windows XP Professional

  • Click Start, run and type gpedit.msc
  • Navigate to the following location:

  => Configuration of the computer
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, double-click Configure automatic updates and set it to not configured
  • Next, go to this location:

  => User configuration
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, set to remove access to all Windows Update features on not configured

  Change how Windows installs or notifies you of updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-how-Windows-installs-or-notifies-you-about-updates

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot remove 2 empty folders in "my pictures". Said 'Read only', so they are not accessible, but if I uncheck this, there always reappears (the box is totally green) after she is unable to delete.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Believe, otherwise, the 'Read only' attribute has nothing to do with 'read only' for folders in Windows XP.  It actually refers to a custom folder.  To change the access permissions, you must right-click on a folder, select 'Properties', then select the security"" tab.  If you do not have a Security tab, it's either because you have XP Pro and 'Simple file sharing' enabled, or you have XP Home, and you are not an administrator mode without failure.  The following items should enlighten you...

  "You can not view or change the read-only or the attributes of system files in Windows Server 2003, Windows XP, Windows Vista or Windows 7"
    <>http://support.Microsoft.com/kb/326549 >

  "How to disable the file sharing simple and how to set permissions on a shared folder in Windows XP"
    <>http://support.Microsoft.com/kb/307874 > (XP Pro only)

  The command "attrib" in a command window can be useful or, Alternatively, you can use the 'cacls' command in a command window, but it's ugly.

  HTH,
  JW

• Cluster SOA with BigIP as HTTPFrontEnd - deployed WSDL and XSD composite files are not accessible

  Hello

  In our SOA environment, we have an architecture like that.

  We have a Cluster with two nodes of SOA. Each node is to have an OHS. There's a BIGIP which is the HTTP of SOA Cluster interface.

  BIG IP load balancing and HTTP Port 80 and HTTPS 443 port.

  All access to BIGIP is over HTTPS. With HTTP, we are not able to access the artifacts.

  Here, we are faced with a problem.

  All WSDL, XSD, deployed on the server files have as - ends http://bigiphost:80 / soainfra / .....

  These end points are not accessible, and we have to manually convert URLS to https://bigiphost:443 / soainfra / ... for testing.

  Main question is coming when we're trying to raise our composites to RJO. Because the WSDL and XSD files is seen port http endpoints and they are not accessible from the harvester tool. Where a failure.

  Can you please how do ensure that all composite end point and endpoint WSDL are generated as Https://bigiphost:443 instead of HTTP Port.

  I tried two options

  (a) setting serverURL to https://bigiphost:443

  This option modifies all the endpoints and the localities of XSD in a wsdl to the https address document. but it does not composite point endpoint and endpoint WSDL. They are still Http. so not accessible through harvester or browser.

  (b) setting HttpsServerURL to https://bigiphost:443

  It makes a difference.

  Please suggest how can I convert a composite and endpoint WSDL (protocol header) end point to https://bigipport:443 instead of http:bigipport:80

  Thank you

  Jessyca

  Finally got the fix.

  Changed the HTTPServerURL property in the EM Console > SOA-INFRA > SOA Administration > common properties > more advanced properties

  Https://bigipport:443the value HTTPServerURL.

  This helped and all the endpoints and composite WSDL endpoints have been generated with https://bigipport:443 instead of http.

  So overall, I used two properties.

  (a) a HTTPServerURL - change the endpoint WSDL and the composite end.

  (b) ServerURL - change endpoints in the wsdl file with the value set in the present.

  Thank you

• Drop-down menus blink and are not accessible.

  Multi-site blink drop-down menus and are not accessible. Why? I tried to restart and will by default nothing helps. This will not occur in Internet Explorer.

  Do a clean reinstall and delete the program folder before Firefox to (re) install a new copy of the current version of Firefox.

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 21.0.x: http://www.mozilla.org/en-US/firefox/all.html

  Uninstall your current version of Firefox, if possible, the settings in the software security and cleaning of the Windows registry.

  • Do NOT remove the data personal when you uninstall your current version of Firefox, because all profile files will be deleted and you will lose all personal data such as bookmarks and passwords from other versions of Firefox profiles.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • (32-bit Windows) "C:\Program Files\Mozilla Firefox\"
  • (Windows 64 bit) "C:\Program Files (x 86) \Mozilla.
  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
  • http://KB.mozillazine.org/Uninstalling_Firefox

  Your bookmarks and other personal data are stored in the Firefox profile folder and will not be affected by a uninstall and (re) install, but make sure that 'delete personal data' is NOT selected when you uninstall Firefox.

  If you keep problems also create a new profile.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

• Passwords are in the computer (checked in the Security section), but are not not in Firefox

  I just upgraded to 4.0. I see that passwords are installed on the computer and fix (where?, my office is located on a network.) Are passwords on my workstation?), but are not used by Firefox on Web sites.

  Make sure that you do not run Firefox in private - browsing using Firefox without saving the story mode (permanent).

  • You enter private browsing mode, if you select: Tools > Options > privacy > History: Firefox will be: "don't forget the story ever.
  • To view the history settings and cookies, choose: Tools > Options > privacy, choose the setting Firefox will: use the custom settings for the story of
  • Uncheck: [] "Permanent private browsing Mode.

• [The content source &#60; iehistory: a bunch of #s] are not accessible.

  Hello:

  I get a bunch of them in the observer of events as warnings.  Not sure if I have problems because of them or not.  Everything seems to work OK for me.

  Here is a list:

  #1:

  The content source are not accessible.

  Background: Windows Application, catalog creates

  Details: (HRESULT: 0x80004005) (0x80004005)

  #2:

  The content source are not accessible.

  Background: Windows Application, catalog creates

  Details: (HRESULT: 0x80004005) (0x80004005)

  #3:

  The content source are not accessible.

  Background: Windows Application, catalog creates

  Details: (HRESULT: 0x80004005) (0x80004005)

  #4:

  The content source are not accessible.

  Background: Windows Application, catalog creates

  Details: The object was not found. (HRESULT: 0 X 80041201) (0 x 80041201)

  #5:

  The content source are not accessible.

  Background: Windows Application, catalog creates

  Details: (HRESULT: 0x80004005) (0x80004005)

  #6:

  The content source are not accessible.

  Background: Windows Application, catalog creates

  Details: (HRESULT: 0x80004005) (0x80004005)

  Some of the above are repeated 3-4 times. I noticed that the changes from 1000 to 500 in some of them.

  When you first start, these error messages appear.  Not sure whether or not they are part of the problem.

  #1

  The gatherer is unable to read the registry URL.

  Context: Application, catalog creates

  Details: (HRESULT: 0 x 0) (0x00000000)

  #2

  The search service has detected data files corrupted in the index {id = 431}. The service tries to automatically correct this problem by rebuilding the index.

  Details:

  The content index catalog is corrupted. (HRESULT: 0XC0041801) (0xc0041801)

  #3

  The Windows Search Service is stopped because there is a problem with the indexer: the catalog is corrupted.

  Details:

  The content index catalog is corrupted. (HRESULT: 0XC0041801) (0xc0041801)

  It was then rebuilt:

  Windows Windows (3524): the database engine has successfully completed recovery steps.

  Any ideas what to do?  Or is it quite 'normal' during boot?

  Thank you, Rick

  Hello

  Are you facing any problems when working with programs?

  Note:

  The event logs that you have posted here refer to errors with the search Index in your computer. These are not fatal errors. However, they certainly point to the fact that some of the sites indexed on your computer are not accessible for the mechanism of research due to various errors. These errors should disappear once you have performed the following steps.

  Method 1:

  You can run the fixit from following link and check the issue:

  Difficulty of Windows Desktop Search when it hangs or no display of results

  http://support.Microsoft.com/mats/windows_search/

  Method 2:

  You can try to rebuild the index to see if it works:

  Change advanced indexing options

  http://Windows.Microsoft.com/en-us/Windows7/change-advanced-indexing-options

  Let us know if it helps!

• Project and server are not accessible! (175002)

  This is the error message I get whenever I try to use Dreamweaver to connect to my server:

  "Project and server are not accessible! (175002).

  I know that this subject has developed for people using Subversion. But I don't use a Subversion.

  It never happened until I made the last update to Dreamweaver.

  Please notify.

  Thank you!

  The f

  Because this is a Subversion error, I suspect that Dreamweaver tries to access the repository, and as you have not, you get the error.

  How to solve this problem is to develop the files Panel by clicking on the icon at the far right:

  

  Then select the icon for the remote server.

  

  You can then restore the files to normal size panel. This should solve the problem.

• DownThemAll is installed but is not accessible

  I installed the add-on Downthemall, but is not accessible. I mean that, although Downthemall appears in the list of Extensions installed and active, there is no other evidence of its existence - for example, no button or right click on the menu. (I am a user of long date Downthemall (on another machine), so I have some experience with the program.) Also, when I click on Downthemall preferences in the Extensions list, nothing happens.

  I'm on a Macbook Pro 15 "screen Retina running 10.8.4 Mountain Lion and Firefox 23.0.1.

  Thanks for your suggestions on how to solve this problem.

  I found the problem. I disabled the module additional own links and menus of the DtA appeared. DtA works fine now.

• Online contacts but are not

  I have a problem with Skype contacts being shown as online while they were not on the days. I use 4.2.0.187 for many years and never had a single problem... Now I have to update to 6.18.0.106 and now Skype is a mess! never disappoint you Microsoft, never.

  First of all, you killed msn and now you kill Skype. Wonder that things go the way reverse for microsoft these days?

  I tried a few things like change my status and reconsignation Skype, even quit and restart, but nothing suits him. My desktop or laptop have this same problem.

  is not a question of your Skype, but in your contacts, if some of them use Skype from mobile devices, such as a tablet or a smartphone, you will always see as if they are connected, but are not.

• I have 5bdevices connected via iCloud and all are sync very well, except the iPhone 6 more. When I enter anything on any calendar except the iPhone, all devices to synchronize the event. It receives events but are not sent to them. Help!

  I have five Apple devices which are connected via iCloud. The only one who is not properly synchronized is the iPhone 6. It receives the calendar events, but will not send them.

  Please, try the following...

  1. First make sure that all of your settings are correct, that the calendar synchronization is checked on all devices (System Preferences > iCloud on a mac and settings > iCloud on iPhone, iPad, or iPod).
  2. Make sure the calendars that you use are in your "iCloud" and not a "on my Mac", "On My Phone" or other iCloud no account (you can do this by clicking / pressing the calendar button in the upper left corner of the application), iCloud no calendars will be not synchronize.
  3. If you are sure that everything is configured correctly and your calendars are in the iCloud account, you could try to uncheck syncing calendar in iCloud settings, reboot your device and then reactivating calendar sync settings.

• I have synced clips successful but video and audio are not visible until it is developed to the timeline. Returned results completely black film without sound. Any tips?

  I have synced clips successful but video and audio are not visible until it is developed to the timeline. Returned results completely black film without sound. Any tips?

  Please give as much information as possible on your support. The video and audio works in QuickTime player? What are the specifications of media?