Options of DMA with the NI PXI for the PCI 3 rd-party with no DMA controller device

Similar Questions

• HI all I would like to ask if you help me, I want to draw paths, but when I use options to mark with a pen or brush settings I lose quality when I Zoom, can someone help me with the settings for the pen?

  HI all I would like to ask if you help me, I want to draw paths, but when I use options to mark with a pen or brush settings I lose quality when I Zoom, can someone help me with the settings for the pen?

  The work path is a vector and infinitely scalable, but when caress you, Photoshop sets the pixels on a layer following the path.  These pixels are rasterized and based and cannot be resized without loss of quality.  You have options.  If you want to enlarge the raster layer, transform the work path and stroking again.  Or work at a resolution higher, in the first place.

  Either incidentally, you can't trace a path with the pen, because it's a vector tool, and caressing is a matrix function based.

  

• Print on the two option (duplex) sides missing Mac 10.8 for LaserJet Pro 200 M251nw

  I just purchased and installed a printer LaserJet Pro 200 color M251nw.

  From a Windows 7 machine, the properties of the printer box allows an option (I think on the finishing tab) for printing duplex (manual), which when used will then display a screen printing by telling you how to remove paper from the output tray and reload at the entrance, then press ok to continue with the other side of each print sheet.  I tried my laptop and it works fine.

  Even if it is a manual process for this printer, I would really like to be able to do when printing from my Mac, but it doesn't seem to be a way to select duplex printing.  Is it possible to have this feature?  Is there something I need to set differently on the printer?  It would be really useful.  Thank you.

  Hello
  The two-Sided feature reffer automatic two sided printing.
  As the specific device provide printing manual duplex only, you can perform duplexing manual as follows:
  
  In order to perform manual duplexing, Joanie you use the Pages to the printer setting, you will find listed in the manual duplex printing sectiong below:
  http://support.HP.com/us-en/document/c01663233
  
  Kind regards
  Shlomi

• RunAs with the /savecred option does not accept the credentials stored by the cmdkey command

  Hello

  I am trying to automate the storage of credentials for profiles of several people on several servers so that they can use it with scripts, they will use that have the command 'runas' with the /savecred option.  I use the command "cmdkey" to store the user and the password, but when the runas command is run, it prompts for the password anyway.  I know that the /savecred works since if I leave the command-line runas for the password and I enter, on subsequent runs, he is more requested for the password.  Curiously, if I use the cmdkey command to replace the stored credentials, runas invite you again the password so it can store it himself.  Almost as runas does not 'trust' cmdkey.  Any thoughts on why this can happen and how can I get around it?  I really need to automate the identification information storing or it will take a couple hundred manual executions of the runas command to get this store on the profiles of all the people in need.

  Hello

  The question you have posted is related to professional level support. Please visit the below mentioned link to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en/category/w7itpro, w8itpro, windowsvistaitpro, windowsxpitpro, windowsintune

• Option missing Scan from the control panel for my Officeject HP 8600 pro. How can I get that back?

  I have this printer for a few months now - it works well until today.  Option missing Scan from the control panel for my Officeject HP 8600 pro.

  I have Windows 7

  Access has been-

  Beginning

  Devices & Printers

  HP Officejet 8600

  He opens a box that had a detection option (later), which I clicked to bring up the scan dialog box.

  The option disappeared. I have no idea how it happened.

  How can I get that back?

  1. first of all uninstall the software

  • Click on start button, then go to programs > HP > Officejet 8600 and click on Uninstall.

  2. then go to Control Panel > programs and features

  • Officejet 8600-click and then click on uninstall a program
  • 

  3. then download the software on the HP web:

  •  HP Officejet 8600 - drivers and full software features - Windows 7 64 bit

  4 and install with the downloaded software.

  Hope these steps help you,

  * Click the stars KUDOS to say thanks

  * Click the accepted Solution if the answer to the question.

• Search for the Explorer of Windows XP does not display option "what do you want to search for.

  When I open the Explorer search in windows XP, the dog still works without the option "what do you want to search for" and other options. How can I solve this problem?

  * original title - search for windows problem images *.

  Hi true-do,.
   
  -Remember you proceed with recent computer between the calendar changes when things worked fine and now?
   
  This problem may occur if one or more of the Jscript registry key settings are incorrect. This problem can also occur if the Jscript.dll file is missing or damaged.
   
  Several dialog boxes are empty

• about to buy a video.  It contains options for speed on the overview of the site, do get the same options to slow down the video down when I buy the video?

  about to buy a video.  It contains options for speed on the overview of the site, do get the same options to slow down the video down when I buy the video?

  The videos is not 'options '. They are exactly as described. You can use first to add slowed to any video. Correction of the one who is already slowed to normal speed may not produce get results.

  But to answer the question, the videos are exactly as in preview. It would be to you on how you change them and with which application.

• Why my Muse formatting does not disappear when I open the site in DW CS6? I need to change the PayPal shopping cart code to account for my shipping options. I exported the Muse test in a folder and then created a new Site in DW using this file, so any CSS

  Why my Muse formatting does not disappear when I open the site in DW CS6? I need to change the PayPal shopping cart code to account for my shipping options. I exported the Muse test in a folder and then created a new Site in DW with the help of this file, so all CSS should be there, but I don't see on the page about the elements without formatting, any stop to the left. Thank you!

  PS: Muse will be the most impressive program ever when they fix these bugs or drop because not every user will be paying through the nose for Business Catalyst. Grrrrrrrrr.

  Best approach would be not to use the PayPal widget and instead copy and paste the PayPal code embedded in an object > object to insert the HTML in Muse. This way you can edit the HTML code to embed PayPal code from Muse and without having to modify the exported code.

• I own CS5.5 Design Standard for Windows. I consider to switch to Mac. I do use the platform change option to replace CS5.5 Design Standard for Mac?

  I own CS5.5 Design Standard (Dutch version) for Windows. I consider to switch to Mac. I do use the platform change option to replace CS5.5 Design Standard for Mac?

  If Yes, how should I do this?

  If not, what are my options for not having to buy a new version complete for Mac?

  Thanks in advance for answers!

  With sincere friendships.

  René van Barreveld

  Netherlands

  The platform swaps apply only to the current versions. Buy the CS6 upgrade and make the platform switch.

  Mylenium

• I lost the code for the option menu 'limitations' of the iPhone 4, how can you do then? so I can come and factory reset, it is a 4 digit code, so I can be able toexample factory reset the phone, don't know if this is the right forum for my question but

  I lost the code for the option menu 'limitations' of the iPhone 4, how can you do then? so I can come and factory reset, it is a 4 digit code, so I can be able toexample factory reset the phone, don't know if this is the right forum for my question but

  Sorry, but the restriction password cannot be reset, it is part of the backup and restore a backup that was taken after the restrictions were activated, restore this code again.

  You will have to start without the help of the data backup, configure the phone to factory settings and start over. Follow the steps mentioned in this article:

  Use iTunes to restore your device to factory settings - Support Apple iOS

  If you lose or forget your password restriction, you must erase your device and then put it up as a new device to remove the restriction password. Restore the device by using a backup does not delete the access code.

  copied from: Sur les Restrictions (parental control) on iPhone, iPad and iPod touch - Apple Support

• no option available to accept the license agreement for Vista Service Pack 2

  I try to install service pack 2, but fail to accept the terms of the license and continue the installation. My only option is to cancel - the 'next' button is grayed out.

  The window shows the license agreement appears to be too small first, because some words are cut off. I'm still not sure that it displays the entire agreement. The last line displayed is:

  VistaSP2_RM.0_UPGR_RTL_en - us

  I tried to adjust my display settings and the resolution to see if that would help, but it didn't.

  This occurred when you try to update through the Windows Update tool, and then I went to Microsoft and downloaded the stand alone and got the same results.

  Any ideas on why this is happening and how I can get around it?

  Hello riblit,

  Thank you for using the Microsoft Answers forum.  I suggest you download the Service Pack again.  Here is a link to the download site.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=a4dd31d5-F907-4406-9012-a5c3199ea2b3&displaylang=en

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How the printing Option 'Tile' can be withdrawn or cancelled for a mode Page landscape of Publisher 2007 or a Document?

  When I saw a Publisher 2007 page in landscape format, the Option print still appears as "mosaic".  It still prints in tiles on several pages, which I don't want.  I want to delete or cancel the 'tile' print option and check that the page/document prints in full pages.  How is that possible?  Thank you.

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  Office newsgroups

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Publisher&lang=en&CR=us

  Discussions of general issues of editor

  They will help you with your editor questions in the newsgroups Office above

  See you soon.

  Mick Murphy - Microsoft partner

• I bought a Xbox 360 for Windows gamepad, as well as a Play and Charge kit. If I want the charge with this kit controller, can I use a USB/power Apple to the charge controller plug?

  I bought a Xbox 360 for Windows gamepad, as well as a Play and Charge kit. If I want the charge with this kit controller, can I use a USB/power Apple to the charge controller plug?

  Hi Arvin,

  The question you posted would be better suited in the Xbox Forums. I would recommend posting your query in the Xbox Forums.

   

  Welcome to the Xbox support

  http://support.Xbox.com/en-us/

  Hope this information helps.

• "Insert" option is disabled in the context menu for the XQuery Mapper

  In regards to the XQuery Mapper fails when you drag from the Source to the target (Doc ID 1962165.1()

  Insert option is disabled in the context menu due to a complex type in the XSD. How this complex type can be mapped if the target instance must be created before being able to map?

  < XS: complexType >

        < xs:choice >

             < xs:sequence >

                  < xs:element / >

                 < XS: element / >

            </ XS: Sequence >

            < XS: element / >

       </ XS: Choice >

  </ XS: complexType >

  Hello

  I created a small diagram to test, and indeed you cannot use the Insert create items in the design, but you can do it in Source view.

  To be even easier that I did was to take this scheme which had only a root with a choice and added another element like a father (so I added another level). Like this, you are able to use the Insert, and if you see the code that is generated after doing, in the Source, you'll have what you need.

  See you soon,.

• I already have a subscription for first cc. I am also a student, should I go for the student version as it is a much cheaper option. does still all the features that the full version has?

  I already have a subscription for first cc. I am also a student, should I go for the student version as it is a much cheaper option. does still all the features that the full version has?

  Hi Viqsita19734979,

  Yes, if you opt for the student version, you will have exactly the same functionality as the full version.

  You can see below articles to be more specific:

  The specified item was not found.

  Purchase FAQ: How can I submit my proof of eligibility as a student or educator?

  https://helpx.Adobe.com/x-productkb/policy-pricing/Education-FAQ.html

  Let us know if this helps!