ORA-04061: current status of has been invalidated

Hello

In the development of databases
------------------------------------------------------

Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production
PL/SQL Release 11.2.0.2.0 - Production
"CORE 11.2.0.2.0 Production."
AMT for Linux: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production

Need solution for this oracle error
----------------------------------------------------
I get this error - ORA-04061: current status of has been invalidated



pkg1-> hand pkg package

pkg1 calling another package pkg2

I have modified and recompiled package pkg2.

After you run the package PKG1 it throw this error ORA-04061.

I check user_objects and this status are VALID.

In both package doesn't have all the variables.

Please suggest the question above.

Thanks in advance.

Kind regards
Sudhakar P

Just re run the pkg1 you should be fine. Oracle is just saying that Pkg2 has been changed and must recharge it in memory.

Tags: Database

Similar Questions

  • Frequent State existing has been invalidated error

    Hello

    I am confronted with ' ORA-04061: current status of has been invalidated "error frequently.

    Envelope to restart the workflow and bouncing Apache solved the problem. But this happens very frequently, every day, with the workflow I created.
    -----
    An error has occurred in the following workflow.

    Article Type = XXPRTPC
    The point key = 1179610
    The key user =

    Error name =-4061
    Error message = ORA-04061: current status of has been invalidated
    ORA-04061: existing State of the package body 'APPS '. TPC_PKG"has been invalidated
    ORA-04065: not executed, altered or abandoned the package body "APPS. TPC_PKG ".
    ORA-06508: PL/SQL: called program unit is not found: 'APPS. TPC_PKG ".
    Battery error =.
    Wf_Engine_Util.Function_Call (TPC_PKG. YES_ACTION, XXPRTPC, 1179610, 188747, RUN)

    The activity Id = 188747
    Activity label = XXTPCACTION:YES_ACTION
    Translate Code = #EXCEPTION
    Notification ID =
    Assigned to the user =

    Nadir says:
    I checked all objects that depend on the package, they are all valid.

    They may now be valid. But you must check out them when the Package has been invalidated.

    It could happen that some dependent object was changed/re-compiled, leading to the Invalidation of package. As far as I KNOW, oracle will try to recompile the objects when they are queried/used. Read management object dependencies for more details.

    I suggest you to create a job to check the invalid objects in the database and to save the necessary details: name of the object, Type, etc. Last_DDL_Time. You can then check the data recorded by the work.

  • Is it possible to follow why a child specific cursor has been invalidated

    Hi all

    The oracle is 11.2.0.3 on a linux machine.

    Is it possible to follow the reason for which a child specific cursor has been invalidated so often?

    Thanks in advance.
    Best regards.

    This should help,
    http://docs.Oracle.com/CD/E11882_01/server.112/e24448/dynviews_3059.htm

    Aman...

  • ORA-01152: 1 no file has been restored from a sufficiently old backup

    Hi all

    I have restored my database,

    and after it's over, I've tried.

    RMAN > alter database open resetlogs;

    RMAN-00571: ===========================================================
    RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
    RMAN-00571: ===========================================================
    RMAN-03002: failure to modify the order db at 2010-05-26 14:53:08
    ORA-01152: 1 no file has been restored from a sufficiently old backup
    ORA-01110: data file 1: ' D:\ORACLE\BISE1\ORADATA\BISE1DB\SYSTEM01. DBF'


    is there a solution to the situation?

    Thank you

    Ugur

    Here is the explanation:

    ORA-01152: file string has not been restored from a sufficiently old backup

    Cause: An incomplete recovery session was launched, but an insufficient number of logs have been applied to standardize the data base. This file is always in the future than the last applied log. The most likely cause of this error is forgetting to restore the file from a backup before proceeding with an incomplete recovery.

    Action: Apply more marbles until data is coherent or restore the database from a previous backup and recovery of repeat file.

    Also, check out the following link:
    http://oraware.blogspot.com/2008/05/ora-01152-file-1-was-not-restored-from.html

    Published by: Kamran Agayev, a., 26 May 2010 17:02

  • * ORA-32006: SQL_TRACE initialization parameter has been deprecated *.

    Oracle 10.2.0.1

    SQL > startup pfile='/home/oracle/product/10gR2/dbs/uni2init/initora01.ora '
    ORA-32006: SQL_TRACE initialization parameter has been deprecated.
    ORACLE instance started.

    Total System Global Area 1879048192 bytes
    Bytes of size 1220072 fixed
    184549912 variable size bytes
    1677721600 of database buffers bytes
    Redo buffers 15556608 bytes
    Mounted database.
    Open database.

    init.ora

    ORA01.__db_cache_size = 1677721600
    ORA01.__java_pool_size = 16777216
    ORA01.__large_pool_size = 16777216
    ORA01.__shared_pool_size = 150994944
    ORA01.__streams_pool_size = 0
    *.audit_file_dest='/home/Oracle/product/Admin/ORA01/adump '
    *.background_dump_dest='/home/Oracle/product/Admin/ORA01/bdump '
    * full = '10.2.0.1.0'
    *.control_files='/home/oracle/product/oradata/ora01/control01.ctl','/home/oracle/product/oradata/ora01/control02.ctl','/home/oracle/product/oradata/ora01/control03.ctl'
    *.core_dump_dest='/home/Oracle/product/Admin/ORA01/cdump '
    * .db_block_size = 8192
    * .db_domain = "
    * .db_file_multiblock_read_count = 16
    * .db_name = "ora01".
    *.db_recovery_file_dest='/home/Oracle/product/flash_recovery_area '
    * .db_recovery_file_dest_size = 2147483648
    *. Dispatchers ='(Protocol=TCP) (SERVICE = ora01XDB)"
    * .job_queue_processes = 10
    * .log_archive_dest_1 = ' LOCATION = / u06/ARCHIVE_LOG.
    * .log_archive_max_processes = 3
    * .open_cursors = 300
    * .pga_aggregate_target = 791674880
    * runoff = 150
    * .remote_login_passwordfile = "EXCLUSIVE."
    * .resource_manager_plan = "SYSTEM_PLAN".
    * .sga_max_size = 1879048192
    * .sga_target = 1879048192
    * .sql_trace = FALSE
    * .undo_management = "AUTO".
    * .undo_retention = 18000
    * .undo_tablespace = "UNDOTBS1.
    *.user_dump_dest='/home/Oracle/product/Admin/ORA01/udump '
    * .utl_file_dir ='* '

    Published by: user618704 on March 3, 2009 21:37

    Hello

    Remove the parameter sql_trace of the init.ora file and try again.

    * .sql_trace = FALSE

    Concerning

  • Current archive log has been deleted, how to recover using the previous archive log?

    Hello

    My current log sequence #819 and it has been deleted and no other choice to get it back and I have previous newspapers archived with sequences #814 à 818.

    When I start my database is to show that the use ' MUST USE RESETLOGS or NORESETLOGS option of database open, then I used the command

    SQL > ALTER DATABASE OPEN RESETLOGS;
    ALTER DATABASE OPEN RESETLOGS
    *
    ERROR on line 1:
    ORA-01113: file 1 needs media recovery
    ORA-01110: data file 1: ' E:\APP\ADMINISTRATOR\ORADATA\ORCL\SYSTEM01. DBF'

    SQL > alter database recover;
    ALTER database recover
    *
    ERROR on line 1:
    ORA-00283: cool cancelled due to errors
    ORA-01610: recovery using BACKUP CONTROLFILE option must be
    SQL > alter database recovery using backup controlfile;
    change the database recovery using backup controlfile
    *
    ERROR on line 1:
    ORA-00279: change 8433746 September at 15/01/2013 19:51:59 needed to screw 1
    ORA-00289: suggestion:
    E:\APP\ADMINISTRATOR\FLASH_RECOVERY_AREA\ORCL\ARCHIVELOG\2013_01_16\O1_MF_1_819_

    % U_. ARC
    ORA-00280: change 8433746 thread 1 is in sequence #819

    now, I don't have the log archiving with 819 sequence, I recover from 818. Please tell me how to do?

    Hello

    1. select * from v$log and see which log file is current. Query v$logfile to check physical file location belonging to current log group.
2. Take bacup of your curent control file using copy/paste of your OS
3. Issue following command in mount state
recover database until cancel using backup controlfile
4. When it finishes applying available archived logs, still it will ask for the location of archived logs which have not been applied, here provide path of current redo log file you got in first step. Here your recovery will finish after applying current redo log
5.alter database open resetlogs.

    Salman

  • My copy of XP Professional has been invalidated by a virus. I have run the MS validation diagnostic tool and copied the results below.

    Diagnostic report (1.9.0027.0):
    -----------------------------------------
    Validation of Windows data-->
    Validation status: invalid product key
    Validation code: 8
    Code of Validation caching: n/a
    Windows product key: *-* - RTMVC - TJ3PW-6X3P3
    The Windows Product Key hash: uZ8mUYNgWja8luBrhMorIBUH76I =
    Windows product ID: 55274-640-2072854-23464
    Windows product ID type: 1
    Windows license type: Volume
    The Windows OS version: 5.1.2600.2.00010100.3.0.pro
    ID: {B8694585-BA5F-45DB-9D0F-E173AB179DA7} (3)
    Admin: Yes
    TestCab: 0x0
    LegitcheckControl ActiveX: Registered, 1.9.42.0
    Signed by: Microsoft
    Product name: n/a
    Architecture: n/a
    Build lab: N/A
    TTS error: n/a
    Validation Diagnostic: 025D1FF3-230-1
    Resolution state: n/a

    Given Vista WgaER-->
    ThreatID (s): n/a
    Version: n/a

    Windows XP Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    File: No.
    Version: N/a, hr = 0 x 80070002
    WgaTray.exe signed by: n/a, hr = 0 x 80070002
    WgaLogon.dll signed by: Microsoft

    OGA Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002
    OGAExec.exe signed by: n/a, hr = 0 x 80070002
    OGAAddin.dll signed by: n/a, hr = 0 x 80070002

    OGA data-->
    Office status: 109 n/a
    OGA Version: N/a, 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Office Diagnostics: 025D1FF3-230-1

    Data browser-->
    Proxy settings: N/A
    User Agent: Mozilla/4.0 (compatible; INTERNET EXPLORER 6.0; Win32)
    Default browser: C:\Documents and Settings\Stacey\Local Settings\Application Data\Google\Chrome\Application\chrome.exe
    Download signed ActiveX controls: fast
    Download unsigned ActiveX controls: disabled
    Run ActiveX controls and plug-ins: allowed
    Initialize and script ActiveX controls not marked as safe: disabled
    Allow the Internet Explorer Webbrowser control scripts: disabled
    Active scripting: allowed
    Recognized ActiveX controls safe for scripting: allowed

    Analysis of file data-->

    Other data-->
    Office details: {B8694585-BA5F-45DB-9D0F-E173AB179DA7}1.9.0027.05.1.2600.2.00010100.3.0.prox 32*-*-*-*-6X3P355274-640-2072854-234641S-1-5-21-299502267-1409082233-725345543Dell Computer CorporationDimension 2400 Dell Computer CorporationA0320030919000000.000000 + 00021293F4F0100206204090409Time(GMT-05:00) Standard is03109

    License data-->
    N/A

    Windows Activation Technologies-->
    N/A

    --> HWID data
    N/A

    Activation 1.0 data OEM-->
    BIOS string matches: Yes
    Marker of the BIOS string: 1B34C:Dell Inc. | 1B34C:Microsoft Corporation
    Marker of OEMBIOS string. DAT: N/a, hr = 0x80004005

    Activation 2.0 data OEM-->
    N/A

    Here is your manual:

    http://support.Dell.com/support/eDOCS/systems/dim2400/en/F75560LRs.PDF

    Search on p. 43 of the instructions on how to restore your PC to its original state if need arise. Obviously, make sure that all your data is backed up first!

    Everyone works on your PC? If so, this could explain your situation. (I assume that malware could do it, but if so, he is first heard of).

    FWIW, Dells typically use what is called a "Golden Master" key. This key does not match what is on your COA sticker. In general, this key must be used in rare cases, you use a generic XP OEM installation CD. The Golden Master key for the Dell Windows XP OEM branded version begins with XJM6Q (you can Google it). Maybe that's the key that you need if you are using a program like this change key:

    http://Windows.Microsoft.com/en-us/Windows/help/genuine/product-key

    (Click the Windows XP tab!)

    Which may or may not work according to what is really on your PC (and who knows, maybe even than the product key on your COA sticker may work after all, but I have my doubts). If you have a version of Windows XP VLK currently installed on your PC (as opposed to the royalty of Dell OEM version), I guess you may have to start from scratch. If all goes well, the restore hidden on your hard drive partition is still intact.

  • "Security error: your session has been invalidated" https Web site does not load

    Hello, I have this problem, I can not access this bank https://hellobank.it/ Web site or any of its pages with Firefox. This is one I take a stake in the Bank and I've never been able to access, it's not like I was able to load before and now I get this message.
    Screenshot: the "session_invalidated" image does not exist. https://support.Mozilla.org/en-us/gallery/image/19269
    The site works fine with IE 11. I have FF 32.0.3 and tried the following where nothing works:

    clear cookies
    Clear cache
    Restart in safe mode
    remove the cert8.db

    I don't want to reset FF. Any ideas? Thank you very much for your support.

    The details of your system to list shows you which were used in previous versions of Firefox and preferences which are no longer supported in the current release Firefox.

    Delete possible user.js and files numbered prefs-# .js and rename (or delete) the file prefs.js to reset all the prefs by default, including the prefs set via user.js and pref which is no longer supported in the current version of Firefox.

    You can try the following steps in case of problems with web pages:

    You can reload webpages and ignore the cache to refresh potentially stale or corrupt.

    • Hold down the SHIFT key and click the Reload button
    • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
    • Press 'Command + shift + R' (Mac)

    Clear the cache and delete cookies only from Web sites that cause problems.

    "Clear the Cache":

    • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

    'Delete Cookies' sites causing problems:

    • Firefox/tools > Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

    • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
    • Do NOT click on the reset button on the startup window Mode safe

  • current state of the package has been abandoned...

    Hi all..

    I get the following error only for the '"first run" ", even the package is in State"valid ". If the execute the same package to new "second run", it works ok.

    usually we complie all 'invalid objects"in the diagram, when we pass the TEST or PRE-PRODUCTION code approx.

    but I get the following error, even if the package is in State "valid".
    ERROR at line 1:
ORA-04068: existing state of packages has been discarded
ORA-04061: existing state of package "TEST_OWNER.TEST_PKG" has
been invalidated
ORA-04065: not executed, altered or dropped package
"TEST_OWNER.TEST_PKG"
ORA-06508: PL/SQL: could not find program unit being called:
"TEST_OWNER.TEST_PKG"
ORA-06512: at line 2
    I went through the next thread, blu explained the cause of this error,
    but we receive this error even when the package is 'valid' State too?
    Re: When should be package invalidated?

    Which session refers to a package for first time package is instantiated in memory of the session. If the package is recompiled, Oracle assumes he may have changed and the package in memory session instance is no longer valid. This is why any reference to this package made by this session will raise an error.

    Session 1:

    SQL> create or replace
  2  package pkg1
  3  is
  4  g_n number;
  5  procedure p1;
  6  end;
  7  /

Package created.

SQL> create or replace
  2  package body pkg1
  3  is
  4  procedure p1
  5  is
  6  begin
  7  for rc in (select * from emp) loop
  8  dbms_output.put_line(rc.empno);
  9  end loop;
 10  end;
 11  end;
 12  /

Package body created.

SQL> exec pkg1.p1;

PL/SQL procedure successfully completed.

SQL>

    This package is instantiated PKG1 is session1. Then session 2:

    SQL> alter package pkg1 compile body;

Package body altered.

SQL>

    Back to session 1:

    SQL> exec pkg1.p1;
BEGIN pkg1.p1; END;

*
ERROR at line 1:
ORA-04068: existing state of packages has been discarded
ORA-04061: existing state of package body "SCOTT.PKG1" has been invalidated
ORA-04065: not executed, altered or dropped package body "SCOTT.PKG1"
ORA-06508: PL/SQL: could not find program unit being called: "SCOTT.PKG1"
ORA-06512: at line 1

SQL>

    SY.

  • ORA-04068: current state of the packages was waived - avoid

    Hello
    I fight with the bad behavior of developers that is, something like this:
    CREATE OR REPLACE PACKAGE pkg1 IS

g_version VARCHAR2(20) := '7.3';
    TYPE t_id_kon IS RECORD(
    id_kon VARCHAR2(12),
    sr_id    NUMBER(5));

  TYPE t_id_kont IS TABLE OF t_id_kon INDEX BY BINARY_INTEGER;
  FUNCTION get_version RETURN VARCHAR2;
END pkg1;
/
    I did some tests and looks like when you recompile pkg1 with
    Global g_version variable it is ORA-04068 generated for all sessions using this pkg1 before recompiling.
    But what about type and table_type declared in pkg1 they cause same behavior as g_version global varialbe?

    And generally how to treat than the types of situations of application point of view, you must catch this exception and re-run your application just?
    concerning
    GregG

    Packages tend to fail because of their 'package '. A package has a 'State' when it contains the package variable and constant level etc. and the package is called. On the first calling package, the 'State' is created in memory to hold the values of these variables, etc. If an object including the package depends on for example a table is changed somehow example deleted and recreated due to data dependencies, the package then takes a State not VALID. When you do then appealed to the package, Oracle examines the status and see that it is not valid, then determines that the package has a "State". Because something changed the package depended on, the State is taken as being obsolete and is ignored, which causes the error "State package has been abandoned" message.

    If a package has no variables of level package etc. i.e. the 'State' and then, taking the same example above, the whole takes an INVALID state, but when you make then a call to the package, Oracle considers as invalid, but knows that there is no 'State' attached to it and is therefore able to recompile the package automatically and then continue execution without causing error messages. The only exception here is if the thing that the package was dependent on a change of such kind that the package may not compile, in which case you will get an invalid error package type.

    And if you want to know how we prevent Jetty package States...

    Move all variables and constants in a stand-alone package specification and to refer to those of your original package. So when the status of your original packing is invlidated for some reason, it has no State package and can be recompiled automatically, however the packaging containing the vars/const is not cancelled because it has no dependencies, so the State that is in memory for this package will remain and may continue to be used.

    As for package-level sliders, you will need to make these premises to the procedures/functions using them as you won't be able of sliders reference in all of packages like that (not sure on the use of the REF CURSOR but... exists for me to study!)

    This first example shows the State being disabled by adding a new column on the table and causing to give a 'Package State scrapped' error...

    SQL> set serveroutput on
SQL>
SQL> create table dependonme (x number)
  2  / 

Table created.

SQL>
SQL> insert into dependonme values (5)
  2  / 

1 row created.

SQL>
SQL> create or replace package mypkg is
  2    procedure myproc;
  3  end mypkg;
  4  / 

Package created.

SQL>
SQL> create or replace package body mypkg is
  2    v_statevar number := 5; -- this means my package has a state
  3
  4    procedure myproc is
  5      myval number;
  6    begin
  7      select x
  8      into myval
  9      from dependonme;
 10
 11      myval := myval * v_statevar;
 12      DBMS_OUTPUT.PUT_LINE('My Result is: '||myval);
 13    end;
 14  end mypkg;
 15  / 

Package body created.

SQL>
SQL> exec mypkg.myproc
My Result is: 25

PL/SQL procedure successfully completed.

SQL>
SQL> select object_name, object_type, status from user_objects where object_name = 'MYPKG'
  2  / 

OBJECT_NAME
--------------------------------------------------------------------------------------------------
OBJECT_TYPE         STATUS
------------------- -------
MYPKG
PACKAGE             VALID

MYPKG
PACKAGE BODY        VALID

SQL>
SQL>
SQL> alter table dependonme add (y number)
  2  / 

Table altered.

SQL>
SQL> select object_name, object_type, status from user_objects where object_name = 'MYPKG'
  2  / 

OBJECT_NAME
--------------------------------------------------------------------------------------------------
OBJECT_TYPE         STATUS
------------------- -------
MYPKG
PACKAGE             VALID

MYPKG
PACKAGE BODY        INVALID

SQL>
SQL> exec mypkg.myproc
BEGIN mypkg.myproc; END;

*
ERROR at line 1:
ORA-04068: existing state of packages has been discarded
ORA-04061: existing state of package body "SCOTT.MYPKG" has been invalidated
ORA-06508: PL/SQL: could not find program unit being called: "SCOTT.MYPKG"
ORA-06512: at line 1

SQL>
SQL> select object_name, object_type, status from user_objects where object_name = 'MYPKG'
  2  / 

OBJECT_NAME
--------------------------------------------------------------------------------------------------
OBJECT_TYPE         STATUS
------------------- -------
MYPKG
PACKAGE             VALID

MYPKG
PACKAGE BODY        INVALID

SQL>
SQL> exec mypkg.myproc

PL/SQL procedure successfully completed.

SQL>
SQL> select object_name, object_type, status from user_objects where object_name = 'MYPKG'
  2  / 

OBJECT_NAME
--------------------------------------------------------------------------------------------------
OBJECT_TYPE         STATUS
------------------- -------
MYPKG
PACKAGE             VALID

MYPKG
PACKAGE BODY        VALID

    And the following example shows how to get the package in their own specifications of package variables, allows the package to automatically recompile when it is called even if it has become invalid by the action to add a column to the table.

    SQL> drop table dependonme
  2  / 

Table dropped.

SQL>
SQL> drop package mypkg
  2  / 

Package dropped.

SQL>
SQL> set serveroutput on
SQL>
SQL> create table dependonme (x number)
  2  / 

Table created.

SQL>
SQL> insert into dependonme values (5)
  2  / 

1 row created.

SQL>
SQL> create or replace package mypkg is
  2    procedure myproc;
  3  end mypkg;
  4  / 

Package created.

SQL>
SQL> create or replace package mypkg_state is
  2    v_statevar number := 5; -- package state in seperate package spec
  3  end mypkg_state;
  4  / 

Package created.

SQL>
SQL> create or replace package body mypkg is
  2    -- this package has no state area
  3
  4    procedure myproc is
  5      myval number;
  6    begin
  7      select x
  8      into myval
  9      from dependonme;
 10
 11      myval := myval * mypkg_state.v_statevar;  -- note: references the mypkg_state package
 12      DBMS_OUTPUT.PUT_LINE('My Result is: '||myval);
 13    end;
 14  end mypkg;
 15  / 

Package body created.

SQL>
SQL> exec mypkg.myproc
My Result is: 25

PL/SQL procedure successfully completed.

SQL>
SQL> select object_name, object_type, status from user_objects where object_name = 'MYPKG'
  2  / 

OBJECT_NAME
--------------------------------------------------------------------------------------------------
OBJECT_TYPE         STATUS
------------------- -------
MYPKG
PACKAGE             VALID

MYPKG
PACKAGE BODY        VALID

SQL>
SQL> alter table dependonme add (y number)
  2  / 

Table altered.

SQL>
SQL> select object_name, object_type, status from user_objects where object_name = 'MYPKG'
  2  / 

OBJECT_NAME
--------------------------------------------------------------------------------------------------
OBJECT_TYPE         STATUS
------------------- -------
MYPKG
PACKAGE             VALID

MYPKG
PACKAGE BODY        INVALID

SQL>
SQL> exec mypkg.myproc
My Result is: 25

PL/SQL procedure successfully completed.

  • ORA-25138: HASH_JOIN_ENABLED initialization parameter has depricated

    Hi all

    I'm migrating a database (9.2.0.7.0) from one windows server to another windows server. The goal I created 10.2.0.1 database.

    I copied the pfile file even the 9i database and when I put the command I get below error below

    ORA-25138: HASH_JOIN_ENABLED initialization parameter has been deprecated

    Please help me solve this. I searched in metalink, but there is no help.

    My pfile file contains more entries

    +###########################################+
    + # Optimizer +.
    +###########################################+
    hash_join_enabled = FALSE
    query_rewrite_enabled = FALSE
    star_transformation_enabled = FALSE

    Concerning
    Arun

    But is this going to affect my database anyway?

    If the current value is as shown below

    hash_join_enabled = FALSE

    How behavior does not change when it is deleted?
    DB did not begin with this option.

  • Why the possibility to add bookmarks from any tab has been removed in Firefox 4?

    Also why status bar has been removed from Firefox 4?
    I had to go back to Firefox 3, because the lack of these 2 things were boring me.

    I know, status bar can be fixed with the addon, but why it is not available in a clean version of Firefox?

    Some menu entries are hidden by default and only appear if you use the keyboard to open the menu.

    You can see the difference if you use Alt + F or Alt + B to open the menu 'File' and 'Favorites' and compare them to what see you if you use the mouse to open the menu after completing the bar menus visible by pressing Alt, or by pressing F10.

    • "To bookmark all tabs" (Shift + Ctrl + D) is no longer present in the menu bookmarks unless you open the bookmarks menu via the keyboard (Alt + B).
    • 'Bookmark this Page' is accessible through the context menu of the browser page.
    • "To bookmark all tabs" are available through the context menu of a tab on the tab bar.

    See also:

  • Why the Time Machine has been slain in 'update' for the days?

    My time Machine apparently has been "frozen" in the update mode days.  The last update indicated was four days; for at least two days the backup flash drive was quickly / blinking constantly as it does by updating. Icon Time Machine on Finder devices activity showed the constantly rotating circle ("update"). Time Machine preferences update status bar has been frozen at about 2% of the way across.

    FYI, a few days ago, a break of a few seconds completely stops the iMac - this time could possibly coincide with the beginning of this "freeze".

    I cut and restarted does not.  Your advice will be welcomed-thanks

    a few things could have happened, but is not limited to a failure or a bad drive.

    I reboot, check the source disk and make all necessary repairs with disk utility.

    If the problem persists, you can also check the disk of destination for damage.

    On what your source disk to destination and how the destination disk is connected to your mac? If it's USB it's thanks to a keyboard or a hub? If so plug it directly into the built computers USB port and do not deviate in a chain of USB devices such as a hub or keyboard.

  • Help! HD has been destroyed but LR realized were not

    I am reorganizing massively files on several players are preparing to move from a very old Mac Pro to a new Mac Pro. Somehow, the HD with all current raw photos has been reformatted, apparently by me. I myself will kick til the day that I die. Map of the camera had already been reformatted as a matter of routine. There was however a drive of 11/04/09 data backup, which means that everything was recovered except two shoots on 12/04/09 (316 photos). My boot drive and the LR (version 1.4.1) catalog on my startup disk is not damaged. My catalog settings LR specified a standard preview of 1440 pixels, medium quality, with automatic rejection of the 1:1 AFTER 30 DAYS previews. In my package of catalog Previews.lrdata (folder) ~/Pictures/Lightroom there are many, many files, some of them several MB in size.

    I know it will not be the same as my original raw files, is there a way to harvest the larger preview files, so I have at least something to show for my work on 4/12? These files, all seem to have an extension of ".lr - preview.noindex. I tried to open by force a little in the form of JPEG files with no luck. Any guidance would be much appreciated. Thank you.

    -Scott

    Sorry, here you have this problem. How is first question to me, any different backup?

    You want LRViewer of Marc Rochkind.
    http://ImageIngester.com.

    Don

  • I bought an Acer computer with a real edition of MS XP Prof. FOT years is has been updated and recognized as true .__Now I receive over a status less "invalid / illegal. ? How is it possible

    I bought an Acer computer with a real teacher MS XP edition. Years is has been updated and recognized as authentic. Now I receive a message that is invalid or illegal. How can I solve?
    Kind regards
    T. Hooij

    XP forums:

    http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

    Link above is for XP Forums.

    There is a list of the different Forums XP to the link above to help you.

    You get the help you need there.

    Here is the Vista Forums.

    See you soon

    Mick Murphy - Microsoft partner

Maybe you are looking for