ORA-04068: current state of the packages was waived - avoid

Similar Questions

• error ORA-4068:-l' current state of the package is invalidated

  Hai friends,
  
  Please see this link
  
  Problem we faced, it is ' error ora-4068:-l' current state of the package is disabled "in the application.initiallly of customer, we migrated to oracle 9i and 10g 10.2.0.4.0
  
  We have discussed and obtained the solution as the timestamp of the objects may be different. (we expect the access rights of the table sys.obj$) pls see the link
  
  Re: oracle error-4068
  
  But now we are informed senior as below
  
  (1) error ora-4068 will come only when recompile us the view. is this true?
  
  (2) 6136074 bug is fixed in 10.2.0.4.0. is it?
  
  Gurus of give your valuable suggestions
  
  S

  Packages tend to fail because of their 'package '. A package has a 'State' when it contains the package variable and constant level etc. and the package is called. On the first calling package, the 'State' is created in memory to hold the values of these variables, etc. If an object including the package depends on for example a table is changed somehow example deleted and recreated due to data dependencies, the package then takes a State not VALID. When you do then appealed to the package, Oracle examines the status and see that it is not valid, then determines that the package has a "State". Because something changed the package depended on, the State is taken as being obsolete and is ignored, which causes the error "State package has been abandoned" message.

  If a package has no variables of level package etc. i.e. the 'State' and then, taking the same example above, the whole takes an INVALID state, but when you make then a call to the package, Oracle considers as invalid, but knows that there is no 'State' attached to it and is therefore able to recompile the package automatically and then continue execution without causing error messages. The only exception here is if the thing that the package was dependent on a change of such kind that the package may not compile, in which case you will get an invalid error package type.

  And if you want to know how we prevent Jetty package States...

  Move all variables and constants in a stand-alone package specification and to refer to those of your original package. So when the status of your original packing is invlidated for some reason, it has no State package and can be recompiled automatically, however the packaging containing the vars/const is not cancelled because it has no dependencies, so the State that is in memory for this package will remain and may continue to be used.

  As for package-level sliders, you will need to make these premises to the procedures/functions using them as you won't be able of sliders reference in all of packages like that (not sure on the use of the REF CURSOR but... exists for me to study!)

  This first example shows the State being disabled by adding a new column on the table and causing to give a 'Package State scrapped' error...

  SQL> set serveroutput on
  SQL>
  SQL> create table dependonme (x number)
    2  / 
  
  Table created.
  
  SQL>
  SQL> insert into dependonme values (5)
    2  / 
  
  1 row created.
  
  SQL>
  SQL> create or replace package mypkg is
    2    procedure myproc;
    3  end mypkg;
    4  / 
  
  Package created.
  
  SQL>
  SQL> create or replace package body mypkg is
    2    v_statevar number := 5; -- this means my package has a state
    3
    4    procedure myproc is
    5      myval number;
    6    begin
    7      select x
    8      into myval
    9      from dependonme;
   10
   11      myval := myval * v_statevar;
   12      DBMS_OUTPUT.PUT_LINE('My Result is: '||myval);
   13    end;
   14  end mypkg;
   15  / 
  
  Package body created.
  
  SQL>
  SQL> exec mypkg.myproc
  My Result is: 25
  
  PL/SQL procedure successfully completed.
  
  SQL>
  SQL> select object_name, object_type, status from user_objects where object_name = 'MYPKG'
    2  / 
  
  OBJECT_NAME
  --------------------------------------------------------------------------------------------------
  OBJECT_TYPE         STATUS
  ------------------- -------
  MYPKG
  PACKAGE             VALID
  
  MYPKG
  PACKAGE BODY        VALID
  
  SQL>
  SQL>
  SQL> alter table dependonme add (y number)
    2  / 
  
  Table altered.
  
  SQL>
  SQL> select object_name, object_type, status from user_objects where object_name = 'MYPKG'
    2  / 
  
  OBJECT_NAME
  --------------------------------------------------------------------------------------------------
  OBJECT_TYPE         STATUS
  ------------------- -------
  MYPKG
  PACKAGE             VALID
  
  MYPKG
  PACKAGE BODY        INVALID
  
  SQL>
  SQL> exec mypkg.myproc
  BEGIN mypkg.myproc; END;
  
  *
  ERROR at line 1:
  ORA-04068: existing state of packages has been discarded
  ORA-04061: existing state of package body "SCOTT.MYPKG" has been invalidated
  ORA-06508: PL/SQL: could not find program unit being called: "SCOTT.MYPKG"
  ORA-06512: at line 1
  
  SQL>
  SQL> select object_name, object_type, status from user_objects where object_name = 'MYPKG'
    2  / 
  
  OBJECT_NAME
  --------------------------------------------------------------------------------------------------
  OBJECT_TYPE         STATUS
  ------------------- -------
  MYPKG
  PACKAGE             VALID
  
  MYPKG
  PACKAGE BODY        INVALID
  
  SQL>
  SQL> exec mypkg.myproc
  
  PL/SQL procedure successfully completed.
  
  SQL>
  SQL> select object_name, object_type, status from user_objects where object_name = 'MYPKG'
    2  / 
  
  OBJECT_NAME
  --------------------------------------------------------------------------------------------------
  OBJECT_TYPE         STATUS
  ------------------- -------
  MYPKG
  PACKAGE             VALID
  
  MYPKG
  PACKAGE BODY        VALID
  

  And the following example shows how to get the package in their own specifications of package variables, allows the package to automatically recompile when it is called even if it has become invalid by the action to add a column to the table.

  SQL> drop table dependonme
    2  / 
  
  Table dropped.
  
  SQL>
  SQL> drop package mypkg
    2  / 
  
  Package dropped.
  
  SQL>
  SQL> set serveroutput on
  SQL>
  SQL> create table dependonme (x number)
    2  / 
  
  Table created.
  
  SQL>
  SQL> insert into dependonme values (5)
    2  / 
  
  1 row created.
  
  SQL>
  SQL> create or replace package mypkg is
    2    procedure myproc;
    3  end mypkg;
    4  / 
  
  Package created.
  
  SQL>
  SQL> create or replace package mypkg_state is
    2    v_statevar number := 5; -- package state in seperate package spec
    3  end mypkg_state;
    4  / 
  
  Package created.
  
  SQL>
  SQL> create or replace package body mypkg is
    2    -- this package has no state area
    3
    4    procedure myproc is
    5      myval number;
    6    begin
    7      select x
    8      into myval
    9      from dependonme;
   10
   11      myval := myval * mypkg_state.v_statevar;  -- note: references the mypkg_state package
   12      DBMS_OUTPUT.PUT_LINE('My Result is: '||myval);
   13    end;
   14  end mypkg;
   15  / 
  
  Package body created.
  
  SQL>
  SQL> exec mypkg.myproc
  My Result is: 25
  
  PL/SQL procedure successfully completed.
  
  SQL>
  SQL> select object_name, object_type, status from user_objects where object_name = 'MYPKG'
    2  / 
  
  OBJECT_NAME
  --------------------------------------------------------------------------------------------------
  OBJECT_TYPE         STATUS
  ------------------- -------
  MYPKG
  PACKAGE             VALID
  
  MYPKG
  PACKAGE BODY        VALID
  
  SQL>
  SQL> alter table dependonme add (y number)
    2  / 
  
  Table altered.
  
  SQL>
  SQL> select object_name, object_type, status from user_objects where object_name = 'MYPKG'
    2  / 
  
  OBJECT_NAME
  --------------------------------------------------------------------------------------------------
  OBJECT_TYPE         STATUS
  ------------------- -------
  MYPKG
  PACKAGE             VALID
  
  MYPKG
  PACKAGE BODY        INVALID
  
  SQL>
  SQL> exec mypkg.myproc
  My Result is: 25
  
  PL/SQL procedure successfully completed.
  

• current state of the package has been abandoned...

  Hi all..
  
  I get the following error only for the '"first run" ", even the package is in State"valid ". If the execute the same package to new "second run", it works ok.
  
  usually we complie all 'invalid objects"in the diagram, when we pass the TEST or PRE-PRODUCTION code approx.
  
  but I get the following error, even if the package is in State "valid".
  

  ERROR at line 1:
  ORA-04068: existing state of packages has been discarded
  ORA-04061: existing state of package "TEST_OWNER.TEST_PKG" has
  been invalidated
  ORA-04065: not executed, altered or dropped package
  "TEST_OWNER.TEST_PKG"
  ORA-06508: PL/SQL: could not find program unit being called:
  "TEST_OWNER.TEST_PKG"
  ORA-06512: at line 2

  I went through the next thread, blu explained the cause of this error,
  but we receive this error even when the package is 'valid' State too?
  

  Re: When should be package invalidated?

  Which session refers to a package for first time package is instantiated in memory of the session. If the package is recompiled, Oracle assumes he may have changed and the package in memory session instance is no longer valid. This is why any reference to this package made by this session will raise an error.

  Session 1:

  SQL> create or replace
    2  package pkg1
    3  is
    4  g_n number;
    5  procedure p1;
    6  end;
    7  /
  
  Package created.
  
  SQL> create or replace
    2  package body pkg1
    3  is
    4  procedure p1
    5  is
    6  begin
    7  for rc in (select * from emp) loop
    8  dbms_output.put_line(rc.empno);
    9  end loop;
   10  end;
   11  end;
   12  /
  
  Package body created.
  
  SQL> exec pkg1.p1;
  
  PL/SQL procedure successfully completed.
  
  SQL>
  

  This package is instantiated PKG1 is session1. Then session 2:

  SQL> alter package pkg1 compile body;
  
  Package body altered.
  
  SQL> 
  

  Back to session 1:

  SQL> exec pkg1.p1;
  BEGIN pkg1.p1; END;
  
  *
  ERROR at line 1:
  ORA-04068: existing state of packages has been discarded
  ORA-04061: existing state of package body "SCOTT.PKG1" has been invalidated
  ORA-04065: not executed, altered or dropped package body "SCOTT.PKG1"
  ORA-06508: PL/SQL: could not find program unit being called: "SCOTT.PKG1"
  ORA-06512: at line 1
  
  SQL>
  

  SY.

• Game-CDDrive operation is not valid due to the current state of the object.

  It's been a while, please remind me how to put the code here? PSVersion 5.0.10105.0 VMWare PowerCLI AutoDeploy component 6.0 build 2358282 VMWare ImageBuilder PowerCLI component 6.0 build 2358282 license of VMware PowerCLI component 6.0 build 2315846 VMware vSphere PowerCLI component 6.0 build 2548068 VMware VDS PowerCLI component 6.0 build 2548068 Cloud of VMware Infrastructure Suite PowerCLI component 6.0 build 2548068 VMware HA PowerCLI component 6.0 build 2510422 VMware PowerCLI component Storage Management 6.0 build 2522368 trying to build a server from the ground using Powercli. Started with:

  $paramVM = @{

  VMHost =   $vmhost

  Version =   "v7"

      Name  =   "CompVM"

  Data store = $datastore

  DiskGB =   50

  DiskStorageFormat = "EagerZeroedThick"

  MemoryGB =   4

  NumCpu =   1

  Location =   $Folder

      CD  =   $true

  ResourcePool = $ResourcePool

  PortGroup = $portGroup

  Notes = "DC of DOM"

  Confirm =   $false

  }

  $paramVM . Location | select *

  New-VM @paramVM

  It seemed to go very well.

  Get-VM svr01mid100 | Start-VM

  Then, something isn't quite right.

  $paramNA = @{

  StartConnected =   $true

  WakeOnLan =   $true

  Connected =   $true

      Type  = « Vmxnet3 »

  Confirm =   $false

  }

  Get-VM chi01osm300 | Get-NetworkAdapter | Set-NetworkAdapter @paramNA

  , I get the error: Set-NetworkAdapter: 29/07/2015-18:44:36 Set-NetworkAdapter operation is not valid due to the current state of the object. Online: 9 char: 43 + Get - VM svr01mid100 | Get-NetworkAdapter | Together-NetworkAdapter @paramNA + ~ ~ ~ + CategoryInfo: NotSpecified: (:)) [game-NetworkAdapter], VimException + FullyQualifiedErrorId: Core_BaseCmdlet_UnknownError, VMware.VimAutomation.ViCore.Cmdlets.Commands.VirtualDevice.SetNetworkAdapter MacAddress: 00:10:56:ss:3f:ab WakeOnLanEnabled: true NetworkName: SameAsAbove Type: Vmxnet3 ParentId: VirtualMachine - vm - 108361 Parent: svr01mid100 Uid: /VIServer = Dom\[email protected]: 443/VirtualMachine = VirtualMachine-vm-108361/NetworkAdapter = 4000 / ConnectionState: logged, NoGuestControl, StartConnected ExtensionData: VMware.Vim.VirtualVmxnet3 Id: VirtualMachine-vm-108361/4000 name: NIC 1 Client: VMware.VimAutomation.ViCore.Impl.V1.VimClient )

  Get-VM svr01mid100 | Get-CDDrive | Select Name,IsoPath

  Name IsoPath - CD/DVD drive 1 C:\ PS > Get - VM svr01mid100 | Get-CDDrive. Game-CDDrive - IsoPath $isoPath - StartConnected $true - confirm: $false Set-CDDrive: 29/07/2015-18:50:39 Set-CDDrive operation is not valid due to the current state of the object. I disconnected and then reconnected my session. I tried to see what was going on in vCenter (which I never do) and I fount it tries to start with the ISO, but giving a frown face and reboot again. I think that he did not like something in the build of the server. Help!

  I don't know that I did it is clear enough. The new VM script seems to work, it creates a new virtual machine.

  But eventually, every setting change that I try to do on the virtual machine, I get an error stating that "the operation is not valid due to the current state of the object."

  It seems to take the configuration but then I noticed he tried to start, but it started getting the error that I put in the screenshot.

  To me, that shows that it is trying to boot from the CD, because it is a Windows error.  Moreover, he just trying to start several times.

  Now, I went back and I think that the error "operation is not valid due to the current state of the object" may have been the fact that the VM tried to boot from the CD over and over, this is what is meant by the current state.

  I noticed just here, the hosts have 4.1 on them, which does not support r2 Server 2012.

  I think we're good.  Thank you!

• ERROR: New-Snapshot (the operation is not valid due to the current state of the object)

  Hello guys!

  I've been googlin everywhere, but impossible to find a solution to my problem. I hope that one of you, qualified people can point me in the right direction :)

  I created a powerCLI script to take a snapshot of our most important servers before we do our weekly maintenance. The idea to run the script as regular powershell script and then have

  1. Add snap-ins powercli and connect to virtualcenter servers
  2. ask the VC servers to virtual machines in a perticular folder
  3. Loop foreach on these servers to create a snapshot with the name $snapshotname

  Currently, I just do it turn on a test folder that I created in vSphere that contains 3 test VMs:

  • Testmagne1 - normal operation
  • Testmagne2 - I renamed the folder for this virtual machine in the data store to generate an error.
  • testmagne3 - normal operation

  Since the servers (not the test servers, but good ones) is the most important servers in our environment, I want to be able to catch exceptions and errors when I run this script. I do this with the Try - Catch - Finally works.

  The strange thing is:

  The release of Powershell/PowerCLI is different from the output in VirtualCenter (!)

  In virtualcenter, the output is as follows

  • Testmagne1 - snapshot is created successfully - as expected
  • Testmagne2 - the snapshot creation fails because it cannot find the files .vmx - as expected
  • Testmagne3 - snapshot is created successfully - as expected

  However, the exit in powercli is slightly different:

  • Testmagne1 - snapshot is created successfully - as expected
  • Testmagne2 - creation of the snapshot fails because it cannot find the files .vmx - as expected
  • Testmagne3 - snapshot fails with the error message: operation is not valid due to the current state of the object - huh?

  
  

  Apparently once the first error is generated all succeeding VMs get error "the operation is not valid due to the current state of the object"

  
  

  I've been pulling trying to figure this problem on my hair, but I'm not getting anywhere

  
  

  Here is some additional information:

  1. the Script (abridged version of it. It generates the same error):

  -STARTUP SCRIPT-

  $ErrorActionPreference = "stop".

  Add-PSSnapin VMware.VimAutomation.Vds, VMware.VimAutomation.Core | Out-Null

  SE connect-VIServer VIRTUALCENTER1, VIRTUALCENTER2 | Out-Null # Sensored VirtualCenter names

  $servers = get-VM-location 'testfolder '.

  $snapshotname = 'Testsnapshot '.

  $verifycreatesnapshot = Read-Host "you are about to create snapshots for $servers. Do you want to continue? o/n.

  If ($verifycreatesnapshot - eq 'y') {}

  Write-Host "snapshots of creation...". »

  {ForEach ($i in $servers)

  Write-Host "instant Creation for $i."

  Try {new-Snapshot - VM $i - name $snapshotname |} Out-Null}

  Catch {$_.exception | select *;} Write-Host "Unable to create the snapshot for $i" ;}

  }

  Write-Host "command finished.

  }

  else {Write-Host "Operation canceled by user"}

  Read-Host "end of the script. Press ENTER to close. "

  ------------------ END SCRIPT -------------------

  2. the PowerCli error messages:

  Error for Testmagne 2 (as expected):

  File: [DATASTORE114] testmagne2/testmagne2.vmx

  DynamicType:

  DynamicPropertyInternal:

  FaultCause:

  FaultMessage:

  ErrorId: Client20_TaskServiceImpl_CheckServerSideTaskUpdates_O

  perationFailed

  ErrorCategory: NotSpecified

  TargetObject:

  RecommendedAction:

  SessionId:

  ConnectionId: /VIServer = SENSORED: 443 /

  Severity: error

  Message: 31/10/2013-10:52:16 New-Snapshot the operat

  ion for the entity 'testmagne2' failed with the follo

  the wing's message: "file [DATASTORE114] testmagne2/testmagn".

  E2.vmx was not found.

  Data: {ParameterValues}

  InnerException: VMware.Vim.VimException: exploitation of the entity

  'testmagne2' failed with the following message: 'thread '.

  testmagne2/testmagne2.vmx e [DATASTORE114] was not crazy

  ND ".

  TargetSite:

  StackTrace:

  HelpLink:

  Source:

  Failed to create the snapshot for testmagne2

  Error for testmagne3:

  Creation of snapshot for testmagne3

  ErrorId: Core_BaseCmdlet_UnknownError

  ErrorCategory: NotSpecified

  TargetObject:

  RecommendedAction: An error occurred when executing command: new-Snapshot. I have check

  f exception for more details.

  SessionId:

  Login ID:

  Severity: error

  Message: 31/10/2013-10:52:17 instant New-capture operation is not

  valid due to the current state of the object.

  Data: {ParameterValues}

  InnerException : System.InvalidOperationException: operation is not valid from

  e to the current state of the object.

  at VMware.VimAutomation.ViCore.Impl.V1.Task.ViCoreTaskCo

  reServiceProviderImpl.BeginTaskCompletionPoll (list 1 taskLi

  St)

  at VMware.VimAutomation.Sdk.Impl.V1.Task.CoreTaskService

  Impl.WaitForTask (IEnumerable 1 taskList, ProgressCallback p

  rogressCallback)

  at VMware.VimAutomation.Sdk.Util10Ps.BaseCmdlet.BaseCmdl

  and. EndProcessingErrorHandled()

  at VMware.VimAutomation.ViCore.Util10Ps.BaseCmdlet.BaseC

  mdlet. EndProcessingErrorHandled()

  TargetSite: Sub ThrowTerminatingError (System.Management.Automation.Err

  orRecord)

  StackTrace: At System.Management.Automation.MshCommandRuntime.ThrowT

  erminatingError (ErrorRecord errorRecord)

  HelpLink:

  Source: System.Management.Automation

  Failed to create the snapshot for testmagne3

  3 PowerCLI version

  PowerCLI Version

  ----------------

  VMware vSphere PowerCLI 5.5 Release 1 build 1295336

  ---------------

  Versions of the snap

  ---------------

  VMWare AutoDeploy PowerCLI component 5.5 build 1262826

  VMWare ImageBuilder PowerCLI component 5.5 build 1262826

  License of VMware PowerCLI component 5.5 build 1265954

  VDS's VMware PowerCLI component 5.5 build 1295334

  VMware vSphere PowerCLI component 5.5 build 1295334

  
  

  4 VirtualCenter version

  VMware vCenter Server Version 5.0.0 Build 913577

  vSphere Client Version 5.0.0 Build 913577

  Hosts: VMware ESXi 5.0.0 Build 914586

  If you need additional information, let me know

  Any help is greatly appreciated

  Thank you!

  -Loincloth

  
  

  
  

  Definition - ErrorAction Stop locally on the cmdlet will not solve the problem. We have found and solved the problem and the fix will be available in the next version. Until then, you can use the $error variable to detect whether the cmdlet was successful or not. You can clear the $error variable before calling the cmdlet and check if it's still empty after the call.

• The current state of the target is down and it displays red arrow down in OEM 12 c. But in fact the database is running

  Hi all

  my instance of database shows down in OEM 12 c but in fact the database is running and status of the listener is unknown. What steps should I take to make the database appear?

  FYI,.

  The error is:

  The current state of the target is down. (I checked events tab in the incident handler here, it is showing error as "inaccessible agent (reason = unable to connect to the agent to https://sunshine.mad:3872/emd/main / [connection refused]).") host is accessible.

  A week before I made switch to digital, the basics of data, is that this is the reason why it shows this error? do we need to change any configuration after switching to the databases on OEM 12 c. at this point time of the database instance shows down and the listener to the top but suddenly the database and listener went wrong.

  Please help me, give your suggestions in this regard.

  Verify that the agent is in place and suggested downloading like Antonio. For the target of the database, the home page, go to the (Oracle database > Configuration target >) Configuration of the analysis page, check the monitoring parameters are correct and do a test connection. You can check the parameters of surveillance for the target of the listener as well.

  Kind regards

  -Loc

• With Move-VM error: operation is not valid due to the current state of the object.

  I only started shows after update to PowerCLI v5.1.  My vCenter is v5.0.  I saw this when moving virtual machines to a data store in a different data store cluster.  The task submits to vCenter successfully and ends, but the Move-VM errors and returns control to the script or command line that ran.

  $> Move-VM - VM somevm Datastore - somedatastore - confirm: $false
  Move-VM: 13/11/2012-16:07:45 operation Move-VM is not valid due to the current state of the object.
  On line: 1 char: 1
  + Move-VM VM - somevm - data somedatastore store - confirm: $false
  + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  + CategoryInfo: NotSpecified: (:)) [Move-VM], VimException)
  + FullyQualifiedErrorId: Core_BaseCmdlet_UnknownError, VMware.VimAutomation.ViCore.Cmdlets.Commands.MoveVM

  I'm puzzled.

  Do you by chance have a PowerShell v2 available somewhere where you can run the same script?

  As much as I know there no official PS still in PowerCLI v3 support, although there are only a few known minor pitfalls.

  While clutching at straws

• Together-NetworkAdapter returning to "operation is not valid due to the current state of the object"

  I'm using fix - up all-NIC in the host servers when a portgroup is renamed.  Demand seems to make the required changes, then crashses.  I don't see any errors in the list recent tasks in vCenter.

  I use the following code:

  Get-VMHost vmware.host | Get - VM | Get-NetworkAdapter | Where {$_.NetworkName - eq "ancien_nom"} |  Together-NetworkAdapter - NetworkName "newname" - confirm: $false
  The error is:
  Together-NetworkAdapter: 17/10/2012 12:16:56 game-card network Operation is not valid due to the current

  State of the object.

  At line: 1 char: 114

  {"+... ancien_nom"} |  Together-NetworkAdapter - NetworkName "newname" - confirm: $false

  +                    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: NotSpecified: (:)) [game-NetworkAdapter], VimException)

  + FullyQualifiedErrorId: Core_BaseCmdlet_UnknownError, VMware.VimAutomation.ViCore.Cmdlets.Commands.VirtualDevice.

  SetNetworkAdapter
  It's using PowerCLI 5.1 Release 1 against vCenter 5.0 and 5.0 ESXi.
  Any ideas how or tell you why it's a failure or repair.
  Thank you
  Iain

  No, you should not be a problem.

  Are you by chance using PowerGui?

  There were references to the exact same message when you use an older version of PowerGui and the PowerPack.

  See New - VM error (operation is not valid due to the current state of the object.)

• Error: "ORE" the package was built before R 3.0.0: Please re - install

  Hello

  I'm new in the case R, R, I installed version of website of notch 3.0.1

  Then installed the server of ore. client, supported client version 1.3.1

  now all by running the command from the console of R > library ('ORE')

  The error comes that:

  Error: "ORE" the package was built before R 3.0.0: Please re - install

  I use windows 7, so any help in this regard will be highly appreciated.

  Kind regards

  Rajib

  Rajib,

  Distribution of R Oracle 3.0.1 will be compatible with a future version of Oracle Enterprise R.  You must first uninstall Oracle R Distribution 3.0.1 and then install Oracle R Distribution 2.15.3 for use with Oracle Enterprise R 1.3.1.les Oracle Enterprise R Installation and Administration Guide contains instructions on the installation/uninstallation of Oracle R Distribution:

  Installation of R

  See this blog for more details:

  https://blogs.Oracle.com/R/entry/updating_ord

  Sherry

• vmrun start leads to a "error: operation failed because of the current state of the system.

  Hello

  I am running the vmrun like this on the console command.

  / usr/bin/vmrun t CR h https://ourhost/sdk u ouruser Pei ourpwd start ' build001/build001.vmx [datastorename] '.

  I get the error text:

  Error: The operation has failed because of the current state of the system
  

  When I opened the Vsphere client, I see that the operation began, but also with an error: the operation is not allowed in the current state.

  I'm running on VMWare Vsphere Server Version 4.1.0 Build 258902

  How can I make sure via command line that the State of the system is correct. Is there a way to get corrected through an order status?

  When I try to power to the top of the image within the user interface, it works, but I need to know the opposite effect.

  Thank you.

  Hello and welcome to the forums.

  check via the State of the line of command of this virtual machine if necessary, unblock the process using vmsuport x how to show in this http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1004340 Ko

• OracleDataReader: Operation is not valid due to the current state of the object

  Hi all
  
  I am new to using libraries and oracle development tools. I have a project in vb 2010 began when I use the oracleDataReader to read data from my db (10g). by using the following code:
  
  Oradb As String = "xxxxxxxxxxx".
  Dim conn As New OracleConnection (oradb)
  Conn. Open()
  
  Dim test (1000) As String
  Dim counter As Integer = 0
  Dim cmd As New OracleCommand
  
  Connection group conn cmd.
  cmd.CommandText = "table FROM SELECT column where otherColumn > 21 June 11 '.
  cmd.CommandType = CommandType.Text
  Var as OracleDataReader dr = cmd. ExecuteReader()
  Dr. Read()
  test (Counter) = Dr. GetString (0)
  While Dr. Read()
  test (Counter) = Dr. GetString (0)
  Counter = counter + 1
  Loop
  
  cmd ExecuteReader().
  cmd.CommandText = "SELECT FROM table where otherColumn > 21 June NewColumn 11'"
  Dr. Read()
  test (Counter) = Dr. GetString (0)
  
  
  How could change the cmd.CommandText to run new queries? As it is the second command dr.read throws the following error: "operation is not valid due to the current state of the object.
  
  I found stating an another OracleDataReader object will allow me to run another query, I guess that there is a better way to "reset" State of the object first, as opposed to the creation of any new object each time I need to reset the command text.
  
  
  Any ideas are greatly appreciated. Do not forget that I am new to coding, so I know the real C could be cleaned.
  
  Thank you

  ...
  cmd.CommandText = ""
  dr = cmd.ExecuteReader()
  dr.Read()
  ... etc ...
  

  It will be useful,
  Greg

• How to get the current state of the son process

  Hello
  
  If I know that the instance id of a child process.
  How can I get the current state of the child (e.g., completed, running, etc.) process in the code "PBL"?
  
  Thank you in advance.

  Hello

  Here's a way to display the status of children sub-process engendered by a process parent process creation activity. In this sense, the process id of the subprocedure is "ChildProcess. The id of the activity of creating processes in the parent process that causes the work item instance in the child process called 'SpawnChildren '. This logic is performed from inside the process parent in an activity downstream process creation activity, called "SpawnChildren".

  Display statements have been added just to see you return values (do) their leash not when going into production.

  display "Children: " + children + "\nKeys: " + children.keys + "\nLength: " + length(children) +
  "\nInstance id of child: [" + children["SpawnChildren"] + "]"
  
  if children["SpawnChildren"] = null or children["SpawnChildren"] = "" then
       display "Child is completed"
  else
  
       bp as BusinessProcess
  
       connectTo bp
                       using url = Fuego.Server.directoryURL,
                           user = "test",
                           password = "test",
                           process = "/ChildProcess"
  
       instance as Fuego.Papi.Instance
       instance = getInstance(bp, instance : children["SpawnChildren"])
       logMessage "run Instance: " + instance.id
                        using severity = DEBUG
  
       display "Status: " + instance.status + "; inside the child process in the activity: " + instance.activityName
  
       disconnectFrom bp
  end
  

  I downloaded the project I used this in to http://www.4shared.com/file/130890113/2d825960/ChildrenOfaParent.html.

  Hope this helps,
  Dan

• Daq stop task VI back to the State of the task was really forward the DAQmx Start Task or DAQmx writing?

  Hello

  I use DAQmx and DAQ Assistant and try to get the details on the following questions.

  1 does Daq stop task VI really return to the State of the task is in front the DAQmx Start Task or DAQmx writing? Digital Input taking as an example, I don't think that the status of the task means that input data because I tried and I can't really back to the entry level it was.

  Maybe more experienced people can help to share their expertise.

  2. the information in help indicates "virtual channels created with the function/VI DAQmx create Virtual Channel are called virtual channels the and cannot be used in the task." But I don't know what "in his work" means.

  3. could I get some guidelines or expertise on the Labview programmers when use virtual channels the and when, to the more global?

  Thank you!

  Best regards

  Allen

  If you create a channel of the task, or scale just usuing the screw to create or Assistant session wire io is the only way to pass the info autour.  It is not saved anywhere on the disc.  A channel of the task or the scale in a project can be used by anything in this project.  A channel of the task or the scale recorded in MAX can be used by anything on this machine.  Its an extended thing.

  And Yes, the DAQ Assistant fresh extra performance overhead and the poor than the DAQmx API.  Often, it won't have the impact of a little experiment.  Large applications should avoid the express Visa.

• How can I get the current state "onto the Pixels?

  Hello community,

  Here's the function that creates a switch that handles "snap to Pixels":

  index.html:

  <div id="STP_input" onclick="switchOnOff(this)">
       ...
  </div>
  

  main.js:

  $("#STP_input").click(function () {
       var a = switchOnOff(this);
       if (a) {
            csInterface.evalScript('switchSTP(true)');
       } else {
            csInterface.evalScript('switchSTP(false)');
       }
  });
  

  HostScript.jsx:

  function switchSTP(checkBTN) {
      'use strict';
      
      var condition;
      if (checkBTN === true) {
          condition = true;
      } else {
          condition = false;
      }
  
      var idsetd = charIDToTypeID( "setd" );
      var desc26 = new ActionDescriptor();
      var idnull = charIDToTypeID( "null" );
          var ref6 = new ActionReference();
          var idPrpr = charIDToTypeID( "Prpr" );
          var idtoolsPreferences = stringIDToTypeID( "toolsPreferences" );
          ref6.putProperty( idPrpr, idtoolsPreferences );
          var idcapp = charIDToTypeID( "capp" );
          var idOrdn = charIDToTypeID( "Ordn" );
          var idTrgt = charIDToTypeID( "Trgt" );
          ref6.putEnumerated( idcapp, idOrdn, idTrgt );
      desc26.putReference( idnull, ref6 );
      var idT = charIDToTypeID( "T   " );
          var desc27 = new ActionDescriptor();
          var idtransformsSnapToPixels = stringIDToTypeID( "transformsSnapToPixels" );
          desc27.putBoolean( idtransformsSnapToPixels, condition );
      var idtoolsPreferences = stringIDToTypeID( "toolsPreferences" );
      desc26.putObject( idT, idtoolsPreferences, desc27 );
      executeAction( idsetd, desc26, DialogModes.NO );
  
      return;
  }
  

  But when I hide the Panel and show once again, that the switch back to the default state, turn on my Panel, not "hook to Pixels" PS settings setting. Is it possible to get the current status 'Hang the pixels' setting? How?

  Best regards.

  See post 8 in this thread:

  Re: Need someone to update or create script: "snap to grid of pixels.

• Current state on the text of the hyperlinks does not work

  My menu is composed of hyperlinks in text, and each hyperlink is set to be a highlight color when the page that links is active to help the orientation of the site.  From the outset, the State did not.  I tried everything I can think of.  Initially, I had a problem with the States of both rolling and I "fixed it" tinkering with the hyperlink settings, but it did not help with the active state.

  I tried creating a new site recently to see if Beta 6 had corrected the problem without success.  At this point, the site is more than 100 pages, with somewhere around 16 template and is very difficult to navigate with an active State non-functional.  I would be grateful if someone had a solution or workaround for what does not replace all of my menus handmade with widgets in the menu (the look we're going for is very simple and is easier to achieve with a menu widget text hyperlinks).  It would be also impossible to eliminate the master pages and have a unique menu for each page, because it becomes extremely difficult and time consuming to modify and make additions as the site grows.

  Browsers show the 'active' hyperlink text State when you click on a link (that is, when the mouse button is pressed). It looks like you want something different - you want the menu item that has a hyperlink to the current page to draw in a different State. You can accomplish this in Muse by using the States palette. You can set the hyperlink on the text block, and then specify a text color different for the different States of the text block. Muse will make your block of text in the 'active' State if she has a hypertext link to the current page. It's a bit confusing that there is an 'active' for the text of the hyperlinks and an active State for the page elements...