current state of the package has been abandoned...

Hi all..

I get the following error only for the '"first run" ", even the package is in State"valid ". If the execute the same package to new "second run", it works ok.

usually we complie all 'invalid objects"in the diagram, when we pass the TEST or PRE-PRODUCTION code approx.

but I get the following error, even if the package is in State "valid".
ERROR at line 1:
ORA-04068: existing state of packages has been discarded
ORA-04061: existing state of package "TEST_OWNER.TEST_PKG" has
been invalidated
ORA-04065: not executed, altered or dropped package
"TEST_OWNER.TEST_PKG"
ORA-06508: PL/SQL: could not find program unit being called:
"TEST_OWNER.TEST_PKG"
ORA-06512: at line 2
I went through the next thread, blu explained the cause of this error,
but we receive this error even when the package is 'valid' State too?
Re: When should be package invalidated?

Which session refers to a package for first time package is instantiated in memory of the session. If the package is recompiled, Oracle assumes he may have changed and the package in memory session instance is no longer valid. This is why any reference to this package made by this session will raise an error.

Session 1:

SQL> create or replace
  2  package pkg1
  3  is
  4  g_n number;
  5  procedure p1;
  6  end;
  7  /

Package created.

SQL> create or replace
  2  package body pkg1
  3  is
  4  procedure p1
  5  is
  6  begin
  7  for rc in (select * from emp) loop
  8  dbms_output.put_line(rc.empno);
  9  end loop;
 10  end;
 11  end;
 12  /

Package body created.

SQL> exec pkg1.p1;

PL/SQL procedure successfully completed.

SQL>

This package is instantiated PKG1 is session1. Then session 2:

SQL> alter package pkg1 compile body;

Package body altered.

SQL>

Back to session 1:

SQL> exec pkg1.p1;
BEGIN pkg1.p1; END;

*
ERROR at line 1:
ORA-04068: existing state of packages has been discarded
ORA-04061: existing state of package body "SCOTT.PKG1" has been invalidated
ORA-04065: not executed, altered or dropped package body "SCOTT.PKG1"
ORA-06508: PL/SQL: could not find program unit being called: "SCOTT.PKG1"
ORA-06512: at line 1

SQL>

SY.

Tags: Database

Similar Questions

  • error ORA-4068:-l' current state of the package is invalidated

    Hai friends,

    Please see this link

    Problem we faced, it is ' error ora-4068:-l' current state of the package is disabled "in the application.initiallly of customer, we migrated to oracle 9i and 10g 10.2.0.4.0

    We have discussed and obtained the solution as the timestamp of the objects may be different. (we expect the access rights of the table sys.obj$) pls see the link

    Re: oracle error-4068

    But now we are informed senior as below

    (1) error ora-4068 will come only when recompile us the view. is this true?

    (2) 6136074 bug is fixed in 10.2.0.4.0. is it?

    Gurus of give your valuable suggestions

    S

    Packages tend to fail because of their 'package '. A package has a 'State' when it contains the package variable and constant level etc. and the package is called. On the first calling package, the 'State' is created in memory to hold the values of these variables, etc. If an object including the package depends on for example a table is changed somehow example deleted and recreated due to data dependencies, the package then takes a State not VALID. When you do then appealed to the package, Oracle examines the status and see that it is not valid, then determines that the package has a "State". Because something changed the package depended on, the State is taken as being obsolete and is ignored, which causes the error "State package has been abandoned" message.

    If a package has no variables of level package etc. i.e. the 'State' and then, taking the same example above, the whole takes an INVALID state, but when you make then a call to the package, Oracle considers as invalid, but knows that there is no 'State' attached to it and is therefore able to recompile the package automatically and then continue execution without causing error messages. The only exception here is if the thing that the package was dependent on a change of such kind that the package may not compile, in which case you will get an invalid error package type.

    And if you want to know how we prevent Jetty package States...

    Move all variables and constants in a stand-alone package specification and to refer to those of your original package. So when the status of your original packing is invlidated for some reason, it has no State package and can be recompiled automatically, however the packaging containing the vars/const is not cancelled because it has no dependencies, so the State that is in memory for this package will remain and may continue to be used.

    As for package-level sliders, you will need to make these premises to the procedures/functions using them as you won't be able of sliders reference in all of packages like that (not sure on the use of the REF CURSOR but... exists for me to study!)

    This first example shows the State being disabled by adding a new column on the table and causing to give a 'Package State scrapped' error...

    SQL> set serveroutput on
SQL>
SQL> create table dependonme (x number)
  2  / 

Table created.

SQL>
SQL> insert into dependonme values (5)
  2  / 

1 row created.

SQL>
SQL> create or replace package mypkg is
  2    procedure myproc;
  3  end mypkg;
  4  / 

Package created.

SQL>
SQL> create or replace package body mypkg is
  2    v_statevar number := 5; -- this means my package has a state
  3
  4    procedure myproc is
  5      myval number;
  6    begin
  7      select x
  8      into myval
  9      from dependonme;
 10
 11      myval := myval * v_statevar;
 12      DBMS_OUTPUT.PUT_LINE('My Result is: '||myval);
 13    end;
 14  end mypkg;
 15  / 

Package body created.

SQL>
SQL> exec mypkg.myproc
My Result is: 25

PL/SQL procedure successfully completed.

SQL>
SQL> select object_name, object_type, status from user_objects where object_name = 'MYPKG'
  2  / 

OBJECT_NAME
--------------------------------------------------------------------------------------------------
OBJECT_TYPE         STATUS
------------------- -------
MYPKG
PACKAGE             VALID

MYPKG
PACKAGE BODY        VALID

SQL>
SQL>
SQL> alter table dependonme add (y number)
  2  / 

Table altered.

SQL>
SQL> select object_name, object_type, status from user_objects where object_name = 'MYPKG'
  2  / 

OBJECT_NAME
--------------------------------------------------------------------------------------------------
OBJECT_TYPE         STATUS
------------------- -------
MYPKG
PACKAGE             VALID

MYPKG
PACKAGE BODY        INVALID

SQL>
SQL> exec mypkg.myproc
BEGIN mypkg.myproc; END;

*
ERROR at line 1:
ORA-04068: existing state of packages has been discarded
ORA-04061: existing state of package body "SCOTT.MYPKG" has been invalidated
ORA-06508: PL/SQL: could not find program unit being called: "SCOTT.MYPKG"
ORA-06512: at line 1

SQL>
SQL> select object_name, object_type, status from user_objects where object_name = 'MYPKG'
  2  / 

OBJECT_NAME
--------------------------------------------------------------------------------------------------
OBJECT_TYPE         STATUS
------------------- -------
MYPKG
PACKAGE             VALID

MYPKG
PACKAGE BODY        INVALID

SQL>
SQL> exec mypkg.myproc

PL/SQL procedure successfully completed.

SQL>
SQL> select object_name, object_type, status from user_objects where object_name = 'MYPKG'
  2  / 

OBJECT_NAME
--------------------------------------------------------------------------------------------------
OBJECT_TYPE         STATUS
------------------- -------
MYPKG
PACKAGE             VALID

MYPKG
PACKAGE BODY        VALID

    And the following example shows how to get the package in their own specifications of package variables, allows the package to automatically recompile when it is called even if it has become invalid by the action to add a column to the table.

    SQL> drop table dependonme
  2  / 

Table dropped.

SQL>
SQL> drop package mypkg
  2  / 

Package dropped.

SQL>
SQL> set serveroutput on
SQL>
SQL> create table dependonme (x number)
  2  / 

Table created.

SQL>
SQL> insert into dependonme values (5)
  2  / 

1 row created.

SQL>
SQL> create or replace package mypkg is
  2    procedure myproc;
  3  end mypkg;
  4  / 

Package created.

SQL>
SQL> create or replace package mypkg_state is
  2    v_statevar number := 5; -- package state in seperate package spec
  3  end mypkg_state;
  4  / 

Package created.

SQL>
SQL> create or replace package body mypkg is
  2    -- this package has no state area
  3
  4    procedure myproc is
  5      myval number;
  6    begin
  7      select x
  8      into myval
  9      from dependonme;
 10
 11      myval := myval * mypkg_state.v_statevar;  -- note: references the mypkg_state package
 12      DBMS_OUTPUT.PUT_LINE('My Result is: '||myval);
 13    end;
 14  end mypkg;
 15  / 

Package body created.

SQL>
SQL> exec mypkg.myproc
My Result is: 25

PL/SQL procedure successfully completed.

SQL>
SQL> select object_name, object_type, status from user_objects where object_name = 'MYPKG'
  2  / 

OBJECT_NAME
--------------------------------------------------------------------------------------------------
OBJECT_TYPE         STATUS
------------------- -------
MYPKG
PACKAGE             VALID

MYPKG
PACKAGE BODY        VALID

SQL>
SQL> alter table dependonme add (y number)
  2  / 

Table altered.

SQL>
SQL> select object_name, object_type, status from user_objects where object_name = 'MYPKG'
  2  / 

OBJECT_NAME
--------------------------------------------------------------------------------------------------
OBJECT_TYPE         STATUS
------------------- -------
MYPKG
PACKAGE             VALID

MYPKG
PACKAGE BODY        INVALID

SQL>
SQL> exec mypkg.myproc
My Result is: 25

PL/SQL procedure successfully completed.

  • ORA-04068: current state of the packages was waived - avoid

    Hello
    I fight with the bad behavior of developers that is, something like this:
    CREATE OR REPLACE PACKAGE pkg1 IS

g_version VARCHAR2(20) := '7.3';
    TYPE t_id_kon IS RECORD(
    id_kon VARCHAR2(12),
    sr_id    NUMBER(5));

  TYPE t_id_kont IS TABLE OF t_id_kon INDEX BY BINARY_INTEGER;
  FUNCTION get_version RETURN VARCHAR2;
END pkg1;
/
    I did some tests and looks like when you recompile pkg1 with
    Global g_version variable it is ORA-04068 generated for all sessions using this pkg1 before recompiling.
    But what about type and table_type declared in pkg1 they cause same behavior as g_version global varialbe?

    And generally how to treat than the types of situations of application point of view, you must catch this exception and re-run your application just?
    concerning
    GregG

    Packages tend to fail because of their 'package '. A package has a 'State' when it contains the package variable and constant level etc. and the package is called. On the first calling package, the 'State' is created in memory to hold the values of these variables, etc. If an object including the package depends on for example a table is changed somehow example deleted and recreated due to data dependencies, the package then takes a State not VALID. When you do then appealed to the package, Oracle examines the status and see that it is not valid, then determines that the package has a "State". Because something changed the package depended on, the State is taken as being obsolete and is ignored, which causes the error "State package has been abandoned" message.

    If a package has no variables of level package etc. i.e. the 'State' and then, taking the same example above, the whole takes an INVALID state, but when you make then a call to the package, Oracle considers as invalid, but knows that there is no 'State' attached to it and is therefore able to recompile the package automatically and then continue execution without causing error messages. The only exception here is if the thing that the package was dependent on a change of such kind that the package may not compile, in which case you will get an invalid error package type.

    And if you want to know how we prevent Jetty package States...

    Move all variables and constants in a stand-alone package specification and to refer to those of your original package. So when the status of your original packing is invlidated for some reason, it has no State package and can be recompiled automatically, however the packaging containing the vars/const is not cancelled because it has no dependencies, so the State that is in memory for this package will remain and may continue to be used.

    As for package-level sliders, you will need to make these premises to the procedures/functions using them as you won't be able of sliders reference in all of packages like that (not sure on the use of the REF CURSOR but... exists for me to study!)

    This first example shows the State being disabled by adding a new column on the table and causing to give a 'Package State scrapped' error...

    SQL> set serveroutput on
SQL>
SQL> create table dependonme (x number)
  2  / 

Table created.

SQL>
SQL> insert into dependonme values (5)
  2  / 

1 row created.

SQL>
SQL> create or replace package mypkg is
  2    procedure myproc;
  3  end mypkg;
  4  / 

Package created.

SQL>
SQL> create or replace package body mypkg is
  2    v_statevar number := 5; -- this means my package has a state
  3
  4    procedure myproc is
  5      myval number;
  6    begin
  7      select x
  8      into myval
  9      from dependonme;
 10
 11      myval := myval * v_statevar;
 12      DBMS_OUTPUT.PUT_LINE('My Result is: '||myval);
 13    end;
 14  end mypkg;
 15  / 

Package body created.

SQL>
SQL> exec mypkg.myproc
My Result is: 25

PL/SQL procedure successfully completed.

SQL>
SQL> select object_name, object_type, status from user_objects where object_name = 'MYPKG'
  2  / 

OBJECT_NAME
--------------------------------------------------------------------------------------------------
OBJECT_TYPE         STATUS
------------------- -------
MYPKG
PACKAGE             VALID

MYPKG
PACKAGE BODY        VALID

SQL>
SQL>
SQL> alter table dependonme add (y number)
  2  / 

Table altered.

SQL>
SQL> select object_name, object_type, status from user_objects where object_name = 'MYPKG'
  2  / 

OBJECT_NAME
--------------------------------------------------------------------------------------------------
OBJECT_TYPE         STATUS
------------------- -------
MYPKG
PACKAGE             VALID

MYPKG
PACKAGE BODY        INVALID

SQL>
SQL> exec mypkg.myproc
BEGIN mypkg.myproc; END;

*
ERROR at line 1:
ORA-04068: existing state of packages has been discarded
ORA-04061: existing state of package body "SCOTT.MYPKG" has been invalidated
ORA-06508: PL/SQL: could not find program unit being called: "SCOTT.MYPKG"
ORA-06512: at line 1

SQL>
SQL> select object_name, object_type, status from user_objects where object_name = 'MYPKG'
  2  / 

OBJECT_NAME
--------------------------------------------------------------------------------------------------
OBJECT_TYPE         STATUS
------------------- -------
MYPKG
PACKAGE             VALID

MYPKG
PACKAGE BODY        INVALID

SQL>
SQL> exec mypkg.myproc

PL/SQL procedure successfully completed.

SQL>
SQL> select object_name, object_type, status from user_objects where object_name = 'MYPKG'
  2  / 

OBJECT_NAME
--------------------------------------------------------------------------------------------------
OBJECT_TYPE         STATUS
------------------- -------
MYPKG
PACKAGE             VALID

MYPKG
PACKAGE BODY        VALID

    And the following example shows how to get the package in their own specifications of package variables, allows the package to automatically recompile when it is called even if it has become invalid by the action to add a column to the table.

    SQL> drop table dependonme
  2  / 

Table dropped.

SQL>
SQL> drop package mypkg
  2  / 

Package dropped.

SQL>
SQL> set serveroutput on
SQL>
SQL> create table dependonme (x number)
  2  / 

Table created.

SQL>
SQL> insert into dependonme values (5)
  2  / 

1 row created.

SQL>
SQL> create or replace package mypkg is
  2    procedure myproc;
  3  end mypkg;
  4  / 

Package created.

SQL>
SQL> create or replace package mypkg_state is
  2    v_statevar number := 5; -- package state in seperate package spec
  3  end mypkg_state;
  4  / 

Package created.

SQL>
SQL> create or replace package body mypkg is
  2    -- this package has no state area
  3
  4    procedure myproc is
  5      myval number;
  6    begin
  7      select x
  8      into myval
  9      from dependonme;
 10
 11      myval := myval * mypkg_state.v_statevar;  -- note: references the mypkg_state package
 12      DBMS_OUTPUT.PUT_LINE('My Result is: '||myval);
 13    end;
 14  end mypkg;
 15  / 

Package body created.

SQL>
SQL> exec mypkg.myproc
My Result is: 25

PL/SQL procedure successfully completed.

SQL>
SQL> select object_name, object_type, status from user_objects where object_name = 'MYPKG'
  2  / 

OBJECT_NAME
--------------------------------------------------------------------------------------------------
OBJECT_TYPE         STATUS
------------------- -------
MYPKG
PACKAGE             VALID

MYPKG
PACKAGE BODY        VALID

SQL>
SQL> alter table dependonme add (y number)
  2  / 

Table altered.

SQL>
SQL> select object_name, object_type, status from user_objects where object_name = 'MYPKG'
  2  / 

OBJECT_NAME
--------------------------------------------------------------------------------------------------
OBJECT_TYPE         STATUS
------------------- -------
MYPKG
PACKAGE             VALID

MYPKG
PACKAGE BODY        INVALID

SQL>
SQL> exec mypkg.myproc
My Result is: 25

PL/SQL procedure successfully completed.

  • How long does take to install creative cloud, once the package has been created?

    I created the package and it takes forever to install and never ends correctly, any idea what the problem is it does not give any errors I just hang out of it, after it has been running for 1 + hrs

    Does the same on Mac and PC

    Please check:

    https://helpx.Adobe.com/creative-cloud/Packager/creative-cloud-Packager.html

    Create or modify packages

    It could give an idea about the whole process.

    Concerning

    Baudier

  • RollbackToSP will be working if the column in the table has been abandoned?

    Hi all

    I would really appreciate an opinion on these two scenarios in OWM.

    Scenario one

    Steps to follow:



    Savepoint1, created may 20
    DIAL THE DBMS_WM. CreateSavepoint ('LIVE', 'RRR_Test');


    May 21 change us a table with version:


    DBMS_WM EXEC. BEGINDDL ('users');



    -remove unused column

    ALTER table drop column field users_LTS;



    EXEC DBMS_WM.COMMITDDL ('users');



    3 roll back at the point of backup created on 20 may
    DIAL THE DBMS_WM. RollbackToSP ('LIVE ',' RRR_Test);





    End of the scenario



    Question: Will the OWM correctly changes rollback made to the schema of the table USERS?









    Second scenario





    1 Savepoint1 created may 20
    DIAL THE DBMS_WM. CreateSavepoint ('LIVE', 'RRR_Test');



    May 21 change us a table with version:


    DBMS_WM EXEC. BEGINDDL ('users');



    -remove unused column

    ALTER table drop column field users_LTS;



    EXEC DBMS_WM.COMMITDDL ('users');



    3 roll back at the point of backup created on 20 may
    (1) add the domain of the column to the schema

    (2) rollback
    DIAL THE DBMS_WM. RollbackToSP ('LIVE ',' RRR_Test);



    End of the scenario



    Question: given that the pattern is exactly the same as it was originally, this will work?


    Your ideas are welcome.

    Thank you

    Serge

    Published by: sbornow on May 27, 2009 11:29

    Hi Serge,

    When you add the column to the table, it will be added to all versions/workspaces for this table. All of the current versions, as well as all the historical lines, will contain this new column with a null value or the default value.

    None of DBMS_WM restore procedures will be affected by the DDL changes, or a restore will return all DDL changes made since the backup was created. A backup point cannot become invalid. The restoration works on the level of the line, based on the columns of the primary key (which is not editable by the DOF). So the resulting table will have the same lines as he did at the time that the backup point has been created, adjusted for any changes in the column that has been done on the non-primary key columns.

    Kind regards
    Ben

  • Error: The package has been rejected... while downloading the new version. WebWorks/PlayBook

    You receive an error when uploading a new version, here's the message:
    File bundle (my_app_bar_file.bar) was rejected. Package ID is required for all .bar file. If this is an upgrade, ID of Package must match ID of Package in the bundle of original file.

    Please note that I have tried all suggestions in other threads.

    Signature keys have not been changed.
    The name of the package have not been changed either.

    Later successfully packed and the downloaded version is Jan/06 this year.

    What should I do to solve the problem?

    Have you changed the name of the ZIP file that you're packing by chance? The package name is derived, which would have an impact as well in the end the package ID.

  • 0x800704D3 error: the backup was not completely successful. The application has been abandoned, as he tried to take backup

    Original tile: appeared at the end of backup when the error message appeared. "The reverse was not entirely successful. The request was abandoned. (0x800704D3)

    Recently I had a problem with the combo of virus/malware.  Antivirus 2010, was then brought by an another 'guru' to download StopZilla.com who started the Delete files accompanying the computor.  I have kept and can't get rid of the problem, so decided to back up files, and then put in recovery disks.  Appeared at the end of backup files with the ninth disk, when the error message above has occurred. Is not something else.  Someone said elsewhere "make sure that the AC adapter is on"... what?  THA is the problem?

    Seen also it is suggested to get an external hardware, but what about hang the laptop to existing pc?  Would you do that?  What wiring do I need?

    Hi beltwaytraveler,

    1. you have any third-party backup program installed?

    2 have you tried to use a different backup disk?

    Method 1:

    You can temporarily uninstall third-party anti-virus on your computer protection software and then check if the problem occurs.

    Note: Be sure to install the security software on the computer after you fix the problem.

    Method 2:

    You can also try to uninstall any third-party backup program installed on the computer and try the backup.

    Method 3:

    You try to run the following command and check if all third-party services are running other Microsoft services.

    a. Click Start, click programs, accessories principally made, right click Guest and then click Run as administrator.

    If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

    b. type the following command and press ENTER:

    vssadmin list writers

    c. check the VSS writers listed.

    If you see any third-party service other than Microsoft services running, and then let us know about it.

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Unable to defragment error: (C) defragmentation has been abandoned because of contradictions that were detected in the filestem. Please run CHKDSK or SCANDISK on (C) to fix theses inconsistansies

    Original title: error Defragmenter

    Whenever I try to defragment I get a message saying the following... to come (C) defragmentation has been abandoned because of contradictions that were detected in the filestem. Please run CHKDSK or SCANDISK on (C) to fix theses inconsistansies. Then run disk fragmenteur.

    It may be something to do with Microsoft because it says I don't have add on, but I don't know
    I have windows XP, if that helps.
    E-mail address is removed from the privacy *.
    Thank you very much

    Hi IainFisher,

    Thanks for posting in Microsoft Communities. Of the description of problem I can understand that you are not able to run disk defragment. Provide the following information to understand the issue:

    ·         Did you do changes on the computer before the show?

    ·         Reason why you want to run disk defragment?

    Follow these methods.

    Method 1: Follow the steps in the article.

    How to defragment your disk Volumes in Windows XP

    Method 2: Follow the steps in the article to run the check disk for errors.

    How to perform disk error checking in Windows XP

    Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

    I hope this helps.

    Thank you.

  • 0xC000021A {fatal system error}, the initial session process or the process of the complete system in unexpected ways with the blocking state 0 x 00000000 (0xc0000034 0x001008ac) the system has been halted

    Hello! I got this message from malware (I clicked to delete) in surfing on firefox and after awhile the explorer.exe closes with an error. I try to open the Task Manager and it says explore cannot be found!
    I rebooted and then I got this message "0xC000021A {fatal system error}, the initial session process or the process of the complete system in unexpected ways with the blocking state 0 x 00000000 (0xc0000034 0x001008ac) the system has been halted" and can't get anywhere.
    I can't even go in safe mode, the same error messages appears.

    Hi James,

    You could try the Startup Repair to see if it solves the problem:

    http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

    Chris
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • The speed of the processor 1 group 0 is restricted by the system firmware. The processor has been in this state of reduced performance for 4 seconds since the last report.

    The speed of the processor 1 group 0 is restricted by the system firmware. The processor has been in this state of reduced performance for 4 seconds since the last report.

    Event ID: 37
    Source: Kernel-processor-Power
    Task category: 7

    -What it means and how to fix this?

    : S

    Make sure that the system has sufficient cooling, and that you have upgraded the BIOS most recent.

  • HELP, trying to install Illustrator but get this message that I need to download "Adobe Support Advisor" when I go on the site, I see that it has been abandoned, what should I do now? got trapped in the maze of ther HELP HELP!

    HELP, trying to install Illustrator but get this message that I need to download "Adobe Support Advisor" when I go on the site, I see that it has been abandoned, what should I do now? got trapped in the labyrinth HELP HELP!

    Hi Joseeyk67276640,

    'Download Support Advisor' is a generic error, and we need to understand what is causing the problem. Most of the time, its a problem with the download was not successful or downloaded correctly. So, in this case, re-download the software and do not forget to compare the file size of the file downloaded with the file on the server.  From the following link, please download the version of Illustrator, you need: other downloads

    Allows you to check in this case as well and make sure that the download is complete, if the size of the file is correct, to the install.log file.

    Navigate in the log files in one of the following folder:

    Mac OS: / Library/Logs/Adobe/Installers /.

    C:\Program Files (x 86) \Common Files\Adobe\Installers\

    The name of the log file includes the name of the product and installation date, followed of ".". log.gz."the .gz extension indicates a compressed format.

    You can use a utility to extract the 7z or gz to unzip.

    Once unzipped, the log file is a text file, open the .log using TextEdit (Mac OS) and notebook (OS Win)

    Scroll to the bottom of the log. Look in the section - summary - for lines that begin with ERROR or FATAL and signals a failure during the installation process.

    Copy and paste this section SUMMARIZED here so that we can check for errors. Alternatively, you can analyze the logs yourself. http://helpx.Adobe.com/Creative-Suite/KB/troubleshoot-install-logs-CS5-CS5.html

    Let us know if that helps.

  • Update XCode is not available for this Apple ID either because it was bought by another user or the item has been refunded or cancelled.

    When I try to update Xcode the following error message will be display... Looking for the solution...

    Hello

    "This update is not available for this Apple ID either because it was bought by another user or the item has been refunded or cancelled"

    Applications installed on your Mac are updates available or accepted from the Mac App store, but you have purchased using an Apple who is not currently signed in ID. Log in with the Apple that you used initially to buy apps ID. If you don't know what Apple ID was used, check to see if someone else who uses your Mac has accepted these applications.

    Information above is taken from this Apple support article > Accept bundled apps using the Mac App Store - Apple supported

  • the device has been disconnected or is not available

    I can detect the modem Huawei E173 usb and install following the instructions, but when I try to connect, watch the device has been disconnected or is not available.

    Help, please!

    Currently, my version of the MacBook has been OS X 1 10.11.4

    its MacBook Pro OS X 10.11.4

  • ERROR: Xflow - map: the tube has been completed

    Hello

    while trying to compile a VI to the FPGA target, I encountered an error because of the distance, the compilation failed. I did not understand this error. Someone at - he encountered this error.

    Mapping performed.
    See the report of map file "toplevel_gen_map.mrp" for more details.
    ERROR: Xflow - map: the tube has been completed.
    ERROR: Xflow:42 - abandonment of the workflow execution...

    Bitstream not created
    Time history analysis

    Help, please.

    Thank you

    Hello Mary,.

    This error means that something in your system is damaged, I have dealt with similar questions before that can be solved face-to-face files from one project to another and recompiling. This gives a try and let me know the results.

  • \Device\RaidPort0, restore the device, has been published. Event ID: 129 storahci

    Hello

    I have a DELL XPS 13 9343.
    I did a clean install of Windows 10 and downloaded the drivers from dell.com.
    I am also running Hyper-V.
    I'm repeated warnings in my saying system Envent Viewer:

    \Device\RaidPort0, restore the device, has been published.
    Source: storahci

    Just before I get these events my computer freeze for 10-20 seconds and I can´t anything.
    It's very annoying, and I hope there is a fix for this?
    Thanks in advance.

    I had exactly the same problem on a lot of my dell systems. Here is how I solved the problem:

    First we need to change ""AHCI Link Power Management " which is a setting hidden in power management." Open the registry editor and change the following settings.

    HKLM\SYSTEM\CurrentControlSet\Control\Power\PowerSettings\0012ee47-9041-4b5d-9b77-535fba8b1442\0b2d69d7-A2A1-449c-9680-f91c70521c60

    Change 1 to 2 attributes

    HKLM\SYSTEM\CurrentControlSet\Control\Power\PowerSettings\0012ee47-9041-4b5d-9b77-535fba8b1442\dab60367-53fe-4FBC-825e-521d069d2456

    And again change the attributes of 1 to 2.

    Now, go to the Control Panel-> system and security control-> Power Options , click on "Change Plan settings" and then click on "change power avancΘs."

    Now under "Hard disk", you should have AHCI Link Power Management - HIPM/DIPM and AHCI Link Power Management - Adaptive options.


    Change the 'AHCI Link power management' active, meaning that there is no AHCI power management and finally change adaptive to 0 milliseconds (well if you have enabled "active" this option has no effect).

    Finally under "PCI Express" change "Link State Power management" to OFF.

    I hope this will help you.

    Good luck!

Maybe you are looking for

  • No limit on user input in the application of health

    Hello Just try to understand why Apple has decided not to restrict the values a user can enter manually in the application of health. A user can enter ridiculous values that exceed the display range of input fields, but still reflected in the graph a

  • Best scanner code for 6 s iPhone?

    I just got an iPhone 6s... first smartphone ever for me! How to scan qr codes that you see everywhere? And other codes bars too? If I need an app for that, that one is the best, please? Thank you very much for your help!

  • Marking of questions collecting paper in a Deskjet 2050

    Here is a video on the correction of the paper pickup issues in a Deskjet 2050 printer. It will give a visual guide for the collection of paper troubleshooting problem. The steps which will focus on the video are: 1. reset of the product. 2. check th

  • Problems with Windows XP Pro to Windows Vista computer networking

    I'm totally frustrated. I got a home network that worked with a PC running Windows XP Home and a laptop running Vista Basic. Then, I added a PC running XP Pro and it has added to the network. He works for a while and I was able to share files and pri

  • Error 651 Windows 7

    This only happens when I'm trying to connect to Internet wireless.  Everything is ok with the Ethernet cable.  Any ideas on how to fix, please?