ORA-16157: recovery media not permitted after successful recovery of FINISHING

Similar Questions

• IOM - provisioning not permitted after the cancellation date is defined

  Hello
  For reconciliations target AD, we see certain events having the status of "Received event". In the reconciliation Manager when we re - apply the matching rules for this we get an error that "Provisioning not permitted after the date of cancellation. When I checked the user of the IOM, the user has both cancellation date and supply cancelled the value of past dates.
  
  The thing is that somebody has re-created manually these AD accounts, after the user is finished (after the date of provisions). The above error is specified because of the "deprovisionin date" or "date cancelled supply? Which one should I remove? Form IOM to the user, the date deprovisioned seems to be a single playing field and I can't delete the value.
  
  Thank you

  Is due to the cancellation date and cancelled supply date is set automatically takes its value from the cancellation date.

  For your confusion:

  Just create a user in IOM and give a date of cancellation as the current date. Now, try to provide any resources it then it will show you the same error you get

  "* Commissioning is not allowed after the cancellation date is passed."

  Published by: Rajiv Dewan

• Computer does not work after successful Windows Update.

  I guess this problem can adapt to category two so I posted in the places that I thought it was appropriate.

  So I use Windows XP Home Edition. I decided to be protected from viruses so I turn on the firewall and automatic updates from Microsoft. (It worked fine without automatic updates, but I just wanted to be sure). After the update was finished, I move to shut down the computer. Until the computer off, he asked me to "Turn off the computer with updates" or "Turn off the computer without up-to-date." I thought that the "update" one was the safe route so I clicked that. He will deliver to say update 1-61 do not shut down the computer, so I didn't. After that all 61 updates automatically disable the P.C.

  So now when I try to turn on computer of Paolo just turns off automatically after starting the screen. I didn't touch the PC since the automatic update from Microsoft. I tried to insert the family Windows XP Edition disc and the disc starts praying I can clean the system and restart costs. But to halfway through the computer returned to its ways to auto restart. Now I'm lost. I can not use the box nor can I boot from the disc to erase everything.

  I did nothing for the PC next to the "Microsoft automatic update via the control panel." I feel like I'm being deceived, because it was initially after the update I had problems.

  * I can't start in safe mode or any other mode also if you're wondering because the PC will automatically just restarts.*

  I guess I can record what happens if you really need a better explanation.

  See...

  Help: I got hacked. Now what should I do?
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• URL is not change after successful authenticate with ISE 1.1.1

  Hello

  I have install Cisco Identity Service Engine (1.1.1) with Wireless LAN Controller (7.2.110)

  Everything is complete, unless the redirect URL. My customer comments can join the SSID of comments and also can authenticate to ISE.

  But after they success to authenticate with ISE, the URL in the browser does not alter the pre - configure. There still be something like https://ise-ip:8443/guestportal/redir.html . Anyway the content in the browser is replaced by the URL that is configured as http://www.google.com/

  How can I do with this cause of situation that everything works well, but only the URL of the browser that is not a change to the sits one.

  Thank you

  Mathias

  Hello

  See if this thread will help, what you can do to work around the problem, is to redirect all authentications to a single Web page.

  https://supportforums.Cisco.com/message/3664154#3664154

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• HP ENvy110 and eFax connection not recognized after successful initial Setup

  I properly set up eFax to my network printer.  Have already sent a fax.

  Yesterday the envy acted as if I've never implemented eFax and asked me to register or sign in.

  I connected my phone to eFax number and PIN number and they were not recognized.

  I went to my computer and connected to the eFax successfully with the same phone number and PIN.

  So, the problem is specific to the network printer.

  Any thoughts on this problem?

  nemccarley,

  This may seem a little strange, but it has been known to resolve this issue. Press the ePrint button in the upper left and corner of the screen to your printer. When he shows the ePrint information, press 'Print Info' or 'print the State. " It will usually connect the printer in return the correct servers and you should be able to use your information to open a session in eFax. If you continue to have problems with this, let me know and we can try some other measures.

• Mathcad 14 will not work after successful installation

  I have a new laptop and installed as the first software MathCad.  Installation meets with success.  Congratulations after the installation of liscence.  When I open the mathcad 14 in Start menu, the message...  Mathcad has stopped working correctly appears.  It's software I have intalled on XP, so I think that the disc I install is correct.  PTC has provided me with a new license for the new machine (I sent them the hard drive id and they provided new license).  Sometimes, I see a list of unregistered .ocx and .dll files.  I tried to launch the privileges to administrator and re-install/repair.  Same results.  Any ideas?

  Automatic reports have been sent to Microsoft.

  Having spent the last 48 hours trying to solve this problem of talking to TPC for two hours, I was finally able to reinstall the program successfully.  If you get an error message during the installation which results in error 1305.Error (i.e. check that the lib.tar file exists and that you can access), there is a problem with the length of the filepath name.  In addition, it might be a problem with the installation of MSXML 4.0.   Here are the steps I took:

  (1) I created a folder in my C: / drive with a very short name (i.e. two letters).
  (2) I downloaded the file CD_English.exe of the site Web of PTC for Mathcad 14.0.  It is under its support page.  This is the version put out on listening to Mathcad 14.0.  I extracted all the files in the new folder of file with a short name.
  (3) after downloading, I opened the PreReq file and clicked on all the files listed for install.  When you install msxml, go through the Setup Wizard and click on modify.  Make sure that the XML SDK option is checked.  Complete the installation.
  4) go to the setup.exe file and install Mathcad.
  I hope this will work!

• Workspace does not open after successful EMP 11.1.2.3 configuration

  Hello Experts!

  I have successfully deployed EMP 11.1.2.3 on VMware Workstation 10 with Windows Server 2008 R2 and configured the latter also without warnings or error messages.

  My VMware Workstation has 12 GB of memory and network card (automatic) connected by a bridge with the LAN setting: "IPv4 address assigned by DHCP, IPv6 active."

  In the configuration of the EMP Web server I have "Embedded WebLogic HTTP Server" - everything is configured correctly, but when I try to open the http://localhost:19000/workspace/index.jsp of my VM workstation Internet Explorer, I get the error "Internet Explorer cannot display the webpage". When I click on the Diagnostics button, I get the following message: "the remote resource or device does not accept the connection" or "the remote resource or the device is not configured to accept the connection on port 19000". I checked that WebLogic Server is running, but still I can't open workspace. The Windows hosts file has record 127.0.0.1 localhost < computer name >, I also tried to use 127.0.0.1 or the name of the computer instead of "localhost" in the URL for the workspace - remains the same error.

  Help, please! Any advice will be much appreciated!

  Try to launch from start-> all programs-> Oracle EPM-> -> Foundation-> Shared Services url and check the port number.

  If you use embedded weblogic and compact deployment port 9000

  Concerning

  Celvin

• VMWare Workstation does not work after successful installation

  Hello world

  I installed VMWare Workstation 6.0.5 on Win XP SP3 with success, but the program itself does not start, I get no error messages, just nothing happens. Nothing in the logs of the system either.

  When I tried to run the program in Mode safe mode, it worked!... (obviously impossible to start a computer V, but Workstation started very well)

  any ideas?

  Thank you

  Hello

  I think I just found the reason... and a deaf mute.

  I have installed many programs of news lately for the WebCam and connect it to my DirectTV DVR.  So I did not understand that the wrong software belongs to but think it is the WebCam install stuff that belongs to Live Messenger.

  Anywho, the process that prevents any software vmWare installation or execution was "FixCamera.exe".

  Once I have debug more I will update this list.

  It's by chance luck that I found that I was killing various thought process that it could be linked to the virus filters.

  Kind regards

  David

• Download creative cloud still not available after successful payment

  Cannot download Adobe Premier after payment succeeded for 1 month. Where is the problem? Thank you

  Hi Erick + trodly,.

  Please make sure you use the same Adobe ID (email address) that you used to purchase the subscription.

  See the link below:

  Connect and disconnect activate Cloud Creative applications

  See also,

  Solve the common activation Adobe Creative Cloud (login) and questions (disconnect) disabling or error messages

• Pavilion Media Center does not restart after the full system recovery. get the error code 0 x 4001100200001005

  Pavilion Media Center does not restart after the full system recovery. created recovery disks when purchased new. get the error code 0 x 4001100200001005

  Original title: recovery problem

  Hello

  According to the HP Support Forums, this error may be to do with the hard or for other reasons.

  You never have it replaced with a no HP bought in car?

  Read these threads HP on your error code:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/recovery-disk-error-0x400110020000-1005/TD-p/22936

  http://h30434.www3.HP.com/T5/desktop-recovery-reply-only/trying-to-recover-an-old-PC-error-code/TD-p/964509

  If the original hard drive, press F11 at startup to start the process of recovery partition HP, did you recovery disks of.

  See you soon...

• Win 7-64 not start after change of motherboard. Win 7-64 has tried to repair without success. Message is

  Win 7-64 not start after change of motherboard.   Win 7-64 has tried to repair without success Message of Win7 installed "Cannot automatically repair the start" Message from the repair option DVD Win7-64 install is "this version of the Recovery Options is not compatible with this version of Windows".

  If Win 7-64 don't update the hardware changes and this prevents the start.

  Is there a solution for this problem of resettlement and thus destroy all previous program files and configurations?

  Hello

  As you mentioned that you have "hard disk 500 GB (previously there were two HD in the old mobo)" which means the HD is also changed

  Then I suggest to clean install to solve this problem, please follow the link to clean, install the windows

  http://Windows.Microsoft.com/en-us/Windows/installing-reinstalling-Windows#1TC=Windows-7

  Note: data loss caveat:

  Converting a hard disk partition or volume from NTFS to FAT32 requires that you reformat the partition, which deletes all the data on this subject. Be sure to back up data that you want to keep before you begin.

  Thank you

  Er.Mayank Chadha

  Thanks for your response

  I solved this problem in BIOS Advanced\SATA config\SB SATA config.  as follows

  SATA port 1-4 = AHCI initially

  SATA port 1-4 = new IDE

  SATA port 5-6 = IDE these ports used with DVD, a comic book should be like ports 1-4

  This because I've done a typical mistake of mine.   I did not save the configuration with the entry of FDI

  Good bye

  Huemul

• HP elitebook 2540p does not start after the successful bios update

  Hello people,

  I need your help.

  my hp elitebook 2540p with 2.5 "hhd does not start after a successful bios f.03 to f.24 upgrade done through windows 7.

  When I turn it on the blue light of wifi and power is on but nothing happen.

  I tried to remove the chip from the bios, cmos, hdd, ram, wifi battery... all, but nothing doesn't happen.

  I also tried to start it with the victory + b procedure and win + procedure four arrows so without USB key the caps lock flashing indefinitely but nothing happens, only the fan works quickly with a blue light

  with the USB the system restarts itself every two seconds and I have to remove the USB key.

  I do not know how...

  Thanks for any help.

  Luigi

  all very well now. I used the f.20 rom based on the internet and everything works again.

• In Windows Media Player, my light "Start burn" would not light after dragging the songs on my playlist

  In Windows Media Player, my light "Start burn" would not light after dragging the songs on my playlist, he said only "Connect burner and restart". I have already burned a music CD "RW", why he said burner "connect"? The burner is already installed? I tried the "Device Manager" thing wasn't working, thank you for your help. "

  Hello

  1. have you installed any third-party DVD burning software on the computer?
  2. could you give us the exact error message?

  Method 1.
  If you have installed a third-party software CD burning remove it and then try to burn the disc and check. Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Method 2.
  a. Click Start and type cmd into the search bar and press ENTER.
  b. in the type guest following command press ENTER.
     WMP.dll regsvr32.exe.
  c. close the command prompt and start Windows Media Player and check.

  Method 3.

  You can re-create the database of Windows Media Player and see if that fixes the problem.

  Stage i: To resolve this problem, delete the Windows Media Player database. To do this, follow these steps:

  a. exit Windows Media Player.
  b. Click Start, type %LOCALAPPDATA%\Microsoft\Media Player and then click OK.
  c. Select all files in the folder and then click on Delete on the file menu.
  Note: You don't have to remove the folders that are in this folder.
  d. restart Windows Media Player.
  Note Windows Media Player automatically rebuilds the database.

  Stage II: If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:

  a. exit Windows Media Player.
  b. Click Start, type % LOCALAPPDATA%\Microsoft and then click OK.
  c. Select the Media Player folder, and then click on Delete on the file menu.
  d. restart Windows Media Player.
  Note Windows Media Player automatically rebuilds the database.

  I hope this helps.

• 12 c: ORA-65049: creating local user or role is not permitted in the CBD$ ROOT

  Last night, I installed Oracle 12 c on OEL 6.4. See Oracle Spatial installation and graph 12 c on OEL 6.4 .

  Today, I tried to create a test user following a syntax which worked for 11g but I got a permission error.

  $ sqlplus sys as sysdba

  SQL * more: Production of the version 12.1.0.1.0 Wed Jun 26 07:08:11 2013

  Copyright (c) 1982, 2013, Oracle.  All rights reserved.

  Enter the password:

  Connected to:

  Database Oracle 12 c Enterprise Edition Release 12.1.0.1.0 - 64 bit Production

  With the options of partitioning, OLAP, advanced analytics and Real Application Testing

  SQL > GIVING DBA, CONNECT, RESOURCE to STEVE IDENTIFIED BY dbl-secret-pwd;

  GRANT DBA, CONNECT, RESOURCE to STEVE IDENTIFIED BY dbl-secret-pwd

  *

  ERROR on line 1:

  ORA-65049: creating local user or role is not permitted in CBD$ ROOT

  Any ideas why I get this error in 12 c?

  Hello

  Its new, so I think that you must first create the PDB (plugable DB), then you can create user as part of the PDB not covered by the CBD (DB container),

• Delete buttons do not work after the update of 10.11.16.

  Delete buttons do not work after the update of 10.11.16.  The delete button works if I pointed out and then delete, but not if I use the "back" button or try a removal of uniqueness.  It is a problem in all applications.  I tried it in textedit, search google chrome, safari search and find finder engine.  There seems to be a 'problem' of the keyboard' as far as I know nothing happened to my keyboard, IE the spilt coffee, that recent warming has been updated to 10.11.16.  I use an iMac (27-inch, late 2009) with i5 clocked at 2.66 GHz, running OS X El Capitan.

  Any suggestion would be appreciated.

  Greetings, r.fromstouffville!

  It seems that the 'Delete' on your iMac keyboard key works as it is supposed to be after update to OS X 10.11.6. I'll be happy to help you get these keys working again.

  Reset of the controller management system (SCM) on your Mac - sometimes it's a matter of simply resetting your iMac SMC. Open this article and scroll down to "Reset the SMC on Mac desktop" section and follow the steps there.

  Try safe mode if your Mac does not start -even if your iMac, safe mode startup make sure it starts successfully.

  How to test one question in another user on your Mac account - use this article if restarting in safe mode did not help.

  Use Time Machine to back up or restore your Mac - if your keyboard does not always work as it should, I recommend you save your iMac to ensure that your personal data are safe. It is always better "to have" a backup for a backup "need."

  On OS X Recovery - if you have reached this point, you encounter the same problem in a test user account, that would mean it is a system-w. Start your iMac into Recovery Mode and reinstall the operating system.

  Thank you for the communities of Apple Support!