Computer does not work after successful Windows Update.

Similar Questions

• Windows Movie Maker does not work after installing Windows updates

  my film creator of windows XP home SP2 after obtaining updates (SP3 and others) does not work. How to fix this or how to get free a similar program for video editing?

  See if the following .dll file will help. The Windows Update agent, Wups2.dll file are perhaps not properly saved.

  Open a command prompt window (start-> all programs-> Accessories-> command prompt) and type the command:

  regsvr32 wups2.dll

  Let us know if that helps.

  Marilyn

• Windows Sidebar does not work after recent windows update

  Because windows update ran a few days ago my gadgets has not completely loaded, they were "snack" and had no functionality.  I tried tons of suggested corrections, but none works.

  System 32-bit vista Home premium, desktop pc with a quad core something or other.processor

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  Method 2:
  Try creating a new user account and check if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  If it works fine in the new user account, then it is possible that your user account is corrupted.
  So, try following the steps in the link below and try to resolve the user account corrupted:
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  It will be useful.

• TV - USB box does not work after installing windows update

  The President complied,

  I installed following updates on Apr. 18

  Meadia Leadtek-Streaming and broadcast-ubs devices 2860 devices.after that my Rolf failed to initialize usb tv box, it worked normally. Please help me.

  Now, I found the solution. If anybody face this problem, he could download this driver from following link

  http://home.eeti.com.tw/web20/eg/download.html After you run this usb tv box utv3 driver will run smothly.

• computer does not start after the Windows XP logo window

  Windows xp home edition
  service pack 2
  Dell inspiron 1501

  1. computer does not start after the Windows XP logo window
  2 works well in safe mode, even connect to the external monitor
  3. I reinstalled xp many times, problem stil exist.

  All the answers?

  Hi dhanushm,

  1. What happens after the Windows logo screen?
  2. You receive an error message?
  3. You have security software installed on the computer?
  4. Have you performed an installation clean Windows XP and even after that this problem exists?

  Method 1

  As the computer starts up fine in safe mode there is a possibility that some third-party programs installed on the computer is the origin of the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
  4. When you are prompted, click restart to restart the computer.

  Method 2

  If fails it above step can refer to the article below and try the steps mentioned, check if it helps.

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

  http://support.Microsoft.com/kb/318027

• VB 6 EXE compiled on the server (MS Server 2003) files does not work after restarting Windows 7.

  I work in the field environment.
  Some VB 6 EXE compiled on the server (MS Server 2003) files does not work after restarting Windows 7 PC (shortcut to the server).
  but it runs on the Windows XP computer.
  For example:-Inventory.exe (work), Sales.exe (does not work)
  Help, please.

  Hello

  I suggest you to ask your question at the following link.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/

  I would also ask you to contact your IT Department for further explanations.

• Venue 11 7140 pro micro HDMI does not work after upgrade windows 10

  Has anyone tried connect a HDMI microphone on their place of dell 11 7140 pro after windows 10 upgrade? Mine does not work after the upgrade, but the HDMI from the dock works.

  I have thus display driver problems on 10 to win.

  For me, the micro HDMI port works fine. I use an active adapter, so that could make a difference.

  The HDMI on the dock works well, but only if I directly connect to an HDMI display. If I try to use a passive DVI adapter, then the external screen is not recognized. In addition, the DisplayPort on the wharf is also unnecessary, regardless of the type of cable or attached monitor.

  I encounter this problem after performing a new installation of Win 10, using the brand Dell drivers and latest drivers Intel installed by Windows update.

  It is certainly a driver problem Win 10 because everything works fine if I boot the Tablet under Linux using a USB key.

• HP Laserjet 2100 does not work after upgrade Windows 10

  HP Laserjet 2100 does not work after upgrade to Windows 10. Tried using PCL 5, PCL 6 and also tried the HP Universal print driver. I agree, this is an old printer, but I am disappointed told me "the printer is in error" when I try to print after this upgrade. Worked fine on Windows 7...

  Thank you!

  If the printer is connected using a parallel printer cable, please see the link below for the solution.

  http://h30434.www3.HP.com/T5/LaserJet-printing/possible-solution-to-LPT-port-issues-with-Windows-10-upgrade/TD-p/5372582

• His Dell Inspiron 1420, microphone and camera integrated into the laptop does not work after installing Windows 7 Professional

  No sound from my Dell Inspiron 1420 and the microphone and built-in laptop camera do not work after installing Windows 7 Professional 64-bit. My laptop has Windows 7 Vista 32 - bit family premium. My laptop is 64-bit capable and after going through the Upgrade Advisor, I installed Windows 7 64-bit. I can hear sounds when I use a headset plugged into the line-in Jack, but not through the speakers built into the laptop. I already tried new drivers from the Dell website, but I could not find.

  Any help will be much appreciated. Thank you.

  As it is has no drivers 64 bit Windows 7 on Dell Web site, your best chance is to install the 64-bit versions of Vista (if they exist) in compatibility mode, viz:

  Right click on the Vista driver, then select Properties > Compatibility tab. Now choose to run the program in Vista compatibility mode and then apply > OK. Right click on the file and select run as administrator to install it.

• Windows Update does not work after restoring Windows.

  I have a HP Mini 210-2080NR netbook with Windows 7 starter (31-bit). My hard drive failed and I replaced it. I ordered a USB HP recovery and then reloaded Windows 7 on new hard drive using the USB recovery drive.

  After reloading Windows 7, Windows Update does not work.

  This is the error I get:

  Windows Update cannot currently check the updates, because the service is not running. You may have to restart your computer.

  My connection is OK.

  I restarted my netbook and the error is the same.

  I reloaded Windows 7 and the error is the same.

  Any suggestions?

  Thank you

  eknaphus

  Hello

  You can try and install it and check:

  Intel Rapid Storage Technology

  After that it gets installed restart and check again. Let me know if this does not help...

• On Toshiba M505-S4940 computer microphone laptop does not work after upgrade Windows 7...

  I bought this laptop in July and it came with a free upgrade to Windows 7. Until I upgraded my cell phone, my microphone worked fine, but since I installed Windows 7, the computer does not recognize the microphone as a device. I looked for answers on the Web from Toshiba site, but nothing has worked. What is the problem with my microphone?

  Hi jillibeans34,

  Thanks for posting. Here is a link to the drivers of Toshiba. Download the sound and drivers of Toshiba Speech system. If you're still having problems, please contact Toshiba to see if they can provide you with the correct drivers.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/modelContent.jsp?CT=SB&OS=&category=&MOID=2346345&RPN=PSMG2U&modelFilter=M505-S4940&selCategory=3&selFamily=1073768663

  I hope this helps!
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Primary monitor does not work after last nights updated

  • I'm running Ultimate.
  • I have two monitors.
  • My primary monitor does not work.
  • I checked the VGA cables. This isn't the issue.
  • Edit: Just realized that my main monitor is a monitor "Westinghouse". -Who is a "Plug-in-and-play" monitor, there are no drivers.
  • Reinstalled the ATI drivers, did nothing.
  • SYSTEM RESTORED, still nothing.

  I ran the most recent update for final last night, then fell asleep. Everything worked before that date, but when I went to turn on my computer this morning, only my HP [my second monitor.] w17e worked. He said he was installing updates from last night, so I had no problem with him and thought it might show something once like this on the login screen.

  Once that has happened to the login screen, it showed it for a fraction of a second before disappearing. I entered my password and it connected as usual. After login, I turned off my monitor, and then back on, and it showed my normal desktop for a moment, [enough for me to close two-three programs] before she returned empty.

  Hello
   
  I recommend you to update the graphics drivers and see if it makes a difference. You must be logged on as administrator to perform these steps.
   
  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. in Device Manager, locate the graphics card and then double-click the device name.
  3. click Driver tab, then click on set to update driver and follow the instructions.

  Now, try to follow the link provided to update a hardware driver that is not working properly and check the question below.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  I also suggest that you please check how to set up two monitors and frequently asked questions on how to set up multiple monitors in Windows 7 from Microsoft mentioned below, items

  ·    Setting up dual monitor is easy in Windows 7 http://support.microsoft.com/kb/976064
   
  ·    Multiple monitors: frequently asked questions http://windows.microsoft.com/en-US/windows-vista/Multiple-monitors-frequently-asked-questions
   
   
  Thank you, and in what concerns:
  I. Suuresh Kumar-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Keyboard backlit Y500 does not work after installing Windows 7

  Got a y500, love, installed Windows 7 (experience challenging, but glad I did now that it's done). Everything works like a charm, EXCEPT the backlight on the keyboard. By pressing FN + space does nothing. The keyboard does not blink when starting upwards, either.

  After repeated calls to the line of Lenovo, the responses I get are simply: we don't know why the keyboard backlight lights with Windows 7 installed.

  I don't want to go through the hassle to put Windows 8 on just for the backlight.

  There must be a way to activate the backlight of the keyboard while running windows 7. Lenovo, can you please go to the top of the chain of command to those who are working on updates of pilot and see if there is a way to make it work? Or tell me if I do something wrong?

  TL; Dr: keyboard backlight worked while Win 8 has been installed, put win 7 on, is no longer works.

  I would check the cable connections, the most likely problem.

  You can get a new keyboard on ebay for ~ $40... I'd rather spend than that being without my cell phone.

  http://www.eBay.com/ITM/400543129741?ssPageName=STRK:MEWAX:it & _trksid = p3984.m1423.l2649

  If the link does not work, you can search and Y500 keyboard, but others do not look right.

• Card high speed does not work after installing Windows Service Pack for Vista

  I just installed Windows Service Pack for Vista and now my card Sprint high speed does not work.  The message I get is that the "peripheral No. is recognized. I was using the card top debit without any problems for over 6 months.

  What can I do to get this corrected.

  John

  Assuming that the Vista SP2...

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; ( Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Sony VGN - CR220E Webcam does not work after installing windows 7

  I recently installed windows 7 (not updated, clean installation of windows 7 on my Sony VGN-CR220E, and now my webcam does not work.

  Have already tried the tricks I know and searched the web and there are many others having the same problem, and there are number of recommended suggest solutions. Have tried several of them and has not worked for me after 2 days. Can someone who has actually had this problem and managed to fix it, please let me know.

  Thanks in advance...

  install http://esupport.sony.com/US/p/swu-download.pl?mdl=VGNCR220E&upd_id=5051&os_group_id=6