ORA 17410 - cannot read data from socket

Similar Questions

• HP Pavilion X 2: HP Pavilion XP cannot read data from USB DVDs

  We bought a HP 10-ND200ND (HP pavilion X 2) in the Mediamarkt and tried to install Microsoft Office from a DVD via a DVD USB Samsung player.  This was not possible. According to Support Mediamarkt this product is a Tablet and so cannot read data DVD´s. Only General to play music. To buy a laptop computer for this application. The operating system is Windows 10 (32 bit). Is that correct. Please advice.

  Hi Banhien, the cause is known. I have seen other comments on the HP forum and concluded that the reader needs more power than is available through the USB connector of. I added a hub that can provide power to its connectors USB, HP X 2, by car and the problem has been resolved! It was noted that the mini USB is also more powerful and with the type of adapter USB USB C it might also work, but I did not test this, because I do not have such an adapter. It's odd that such a mini can provide more power. It is surprising that the HP Pavilion X 2 does not have a powerful USB. But the problem is solved. Thanks for your response! Best regards, wiely

• Cannot read data from stored procedure

  Oracle forms 6i
  
  Hai All
  
  I created a procedure and stored in a program unit and I called what trigger button but I got an error
  
  cannot read test_pro.
  
  My name is test_pro
  
  
  Thanks and greetings
  
  Srikkanth.M

  Hello

  try something like that.

  When-pressed shutter button.

  test_pro;
  

  Sarah

• Cannot read data from avi file

  Hello

  I wrote timestamp data and exposure to an AVI file, but I can't as the file data using the read avi function.  I enclose the code to play the video, but also an excerpt of 7 video framework.  If you open the video in a hex editor and search for 'Time', you can see that the data has been written to the file, but I just get the empty string when I try to read this return as in the attached VI.  I'm doing something wrong?

  I use LV 8.0.1 and IMAQ Vision 7.1.1 4.0.

  Thank you

  Greg

  Thank you for your help.

  Finally, I got this problem.  I tried the IMAQ upgrade as you said, repair facilities IMAQ, LabView and removing and reinstalling all my software of NOR.  None of this has helped.

  In that time, I had a lot of other problems with NOR-MAX, got totally fed upwards, formatted the hard drive and reinstalled windows, LabView and all the stuff of vision.  In the process, I discovered that I had bad RAM and replaced the one too.

  Almost all problems are gone now, including this one.

  Thank you

  Greg

• ORA-19846: cannot read the header of the data file of the remote site 21

  Hello

  I have a situation or I can say a scenario. It is purely for testing base. Database is on 12.1.0.1 on a Linux box using ASM (OMF).

  Standby is created on another machine with the same platform and who also uses ASM (OMF) and is in phase with the primary. Now, suppose I have create a PDB file on the primary of the SEED and it is created successfully.

  After that is a couple of log, do it again passes to the waiting, but MRP fails because of naming conventions. Agree with that! Now, on the primary, I remove the newly created PDB (coward the PDB newly created). Once again a couple of switches of newspapers which is passed on to the wait. Of course, the wait is always out of sync.

  Now, how to get back my watch in sync with the primary? I can't roll method until the required data (new PDB) file does not exist on the main site as well. I get the following error:

  RMAN > recover database service prim noredo using backupset compressed;

  To go back to November 8, 15

  using the control file of the target instead of recovery catalog database

  allocated channel: ORA_DISK_1

  channel ORA_DISK_1: SID = 70 = device = DISK stby type instance

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03002: failure of the command recover at the 18:55:32 08/11/2015

  ORA-19846: cannot read the header of the data file of the remote site 21

  The clues on how to I go ahead? Of course, recreating the eve is an option as its only based on test, but I don't want recreation.

  Thank you.

  I tried like below:

  1 a incremental backup of the primary of the CNS where off the eve also taken primary backup controlfile as Eve format.

  2 copy the backup of the watch parts, catalogged them on the day before.

  3 recovered Eve with noredo option - it fails here with the same error pointing to the 21 data file.

  OK, understood. Try not to get back the day before first, rather than restore the controlfile and then perform the restoration.

  Make it like:

  1. take incremental backup of primary SNA, also ensures the backup controlfile format.

  2. copy pending, get the location of the data file (names) by querying v$ datafile on the eve. Restore the controlfile ensures from the backup controlfile you took on primary and mount.

  3. Since you are using OMF, the path of primary and standby data file will be different. (/). If you require catalog data from the database files pending.

  (Reason: you restore controlfile from elementary to step 2, which takes place from the main access road). Use the details that you obtained in step 2 and catalog them.

  4. turn the database copy by RMAN. (RMAN > switch database to copy ;))

  5 Catalog backup items that you copied in step 2.

  6. recover the standby database using 'noredo' option.

  7. finally start the MRP. This should solve your problem.

  The reason I say this works is because here, you restore the controlfile to primary first, which will not have details 21, datafile, and then you are recovering. So it must succeed.

  In the previous method, you tried to first collect all the day before, and then restore the controlfile. While remedial classes, always watch seeks datafile 21 as he controlfile is not yet updated.

  HTH

  -Jonathan Rolland

• Can read data from xls using teststand 3.5?

  Hello

  I use 3.5 TestStand and LabVIEW 8.je know these are quite old versions now, but we must continue with this on a test bench.

  My question is how can I read data from the file xls using TestStand 3.5? I have already mentioned a few posts on this, and one response suggested that I should use "tGetExcel" using ActiveX adapter. I tried to run the test example related to "http://forums.ni.com/t5/NI-TestStand/Write-or-read-to-Excel-from-TestStand/td-p/250439/highlight/tru...", but a run-time error. He says that "the tGetExcel type library information not found. Make sure that the server is registered in the system.

  TestStand 4.2, I could easily run excel at the base of operations by using the Office Excel Toolkit.

  I was wondering, is there another way, I can read just .xls file data by using Teststand 3.5?

  Thank you

  Niraj.

  Please check this example for charger of property:

  C:\Program Files (x 86) \National Instruments\TestStand 3.5\Examples\LoadingLimits

  This shows the limits of excel file loading.

  But you can load the values of the variables-consult the help file / Reference manual for this type of step.

  Also in the loader type forum search property - you can find more information.

  I hope this helps.

• read data from xlsx file

  How to read data from an Excel 2010 worksheet with the .xlsx extension?  The data I want, it's on one of the 10 tabs in the file, I have to choose which programmatically.  I have the Report Generation Toolkit for LV2012, but all the screws that come with it seem to focus around writing data to a spreadsheet Excel and make charts and whatnot.  I want to * read * an Excel worksheet.  Seeking answers led to many 'Open it and save it as tab delimited text', which I can't do because I need data from different tabs, and because this file is quite dynamic with many users opening and adding several times.  In order to save the tab I want as a tab delimited text file per programming, I'm back a square, how to open it?

  My solution would ideally fill in the blanks of: spreadsheet.xlsx---> _---> 2 or 3D data table.

  Thank you

  Adam

  This fixes:

  https://decibel.NI.com/content/docs/doc-3033

• How to read data from an excel and HTML file

  Hello

  I write a 2D-array of string in Excel/HTML file using the generation of reports.

  Can someone tell me how to get back in return, the written data, same files again and display in table format.

  Thank you & best regards

  Visuman

  You can use activex to read data from the excel fileback to the table format... through this vi... may b this will help you...

• Cannot read iTunes from USB. Windows media player cannot play the file. The player might not support the file type or does not support the codec used to compress the file?

  Cannot read iTunes from USB. Windows media player cannot play the file. The player might not support the file type or does not support the codec used to compress the file?

  Ask the question in the Apple Forums:
  https://discussions.Apple.com/index.jspa

• Read data from table of $ E and insert in the staging table

  Hi all
  
  I'm new on ODI. I need your help to understand how to read data from a table ' E$ "and insert in an intermediate table.
  
  Scenario:
  
  The name of two columns, in a flat file, the employee and the employee id must be loaded into a data EMPstore +. A check constraint is added so that the data with the employee names in capital letters only to load in the data store. Check the command is set to the static movement . Right-click on the data store, select control , then check. The lines that have violated the check constraint are kept in E$ _EMP+ table.
  
  Problem:
  
  Problem is I want to read the data in the table E$ _EMP+ and transform in capital letters in the name of the employee and move the corrected data of E$ _EMP+ EMP+. Please advise me on how to automatically manage the 'soft' exceptions in ODI.
  
  Thank you

  If I understand, you want to change the columns in the tables of $ E and then load into the target.

  Now, if you notice how ODI recycles the error, there is an incremental update to the target using the E table $ after he filled the I$ table.

  I think you can do the same thing by creating an interface using the table of $ E as source and implement the business logic in this interface to fill the target.

• Reading data from a text (JS CS3) file tabs-delimited

  Hi - I'm working on a script to read data from a text file and use in a dialog box. But I hit a wall.

  I used a script from a previous post that defines a variable text document when the user script he chooses from a drop-down list.

  var myDialog = app.dialogs.add({name:"Map",canCancel:true});)
  {with (MyDialog)}

  {with (dialogColumns.Add ())}
  {with (borderPanels.Add ())}
  staticTexts.add ({staticLabel: "choose the location :"});})
  {with (dialogColumns.Add ())}
  
  var file = File("~/Desktop/myPlacesfile.txt");

  leader. Open ("r");
  var str = file.read ();
  leader. Close();
  var myPlaceList = str.split (/ [\r\n] + /);
  var myPlaceMenu = dropdowns.add ({stringList:myPlaceList, selectedIndex:0});})
  }
  }}}
  Ditto var = myDialog.show ();
  if(myResult == true) {}
  If (myPlaceMenu.selectedIndex == 0) {}
  myPlace var = ' - undefined ";
  } else {}
  myPlace var = myPlaceList [myPlaceMenu.selectedIndex];
  Alert (myPlace);
  }

  myDialog.destroy ();
  }

  That's what I do now:

  The text file is in this format:

  Value1 value2 [TAB]

  Value1 value2 [TAB]

  Value1 value2 [TAB]

  I need to have the drop down dialog box show only the value 1, and after that the user selects, the script returns only the value 2. (The alert is just there to test - I'm doing something else with the variable).

  Is there a way to view the first part of a tab-delimited line in the menu drop down and return the second half as a variable?

  Any help would be greatly appreciated.

  Thank you

  One of the possibilities is that it. Create a table to the left of the values of the tab of the dialog box. Then create an object that you use it as a table of correspondence. Roughly as follows:

  same thing as what you have

  leader. Open ("r");
  var str = file.read ();
  leader. Close();
  var array = str.split (/ [\r\n] + /);

  'pairs' are the table of correspondence

  pair of var = {};

  as before, 'myPlaceList' will be used for the menu drop-down
  var myPlaceList = [];

  var v;
  for (var i = 0; i)< array.length;="">
  {
  v = table [i] .split ('\t');
  pairs [v [0]] = v [1];
  myPlaceList.push (v [0]);
  }

  Add the drop-down list as before:

  var myPlaceMenu = dropdowns.add ({stringList:myPlaceList, selectedIndex:0});})

  the table of 'pairs' correspondence is used as follows: pairs ['value1'] returns 'value2 '.

  so in your script that would be:

  myPlace var pairs = [myPlaceList [myPlaceMenu.selectedIndex]];

  Peter

• read data from emparray

  I have a function that I would read in pl/sql. How can I read data from it. EMPARRAY function return.
  
  FUNCTION META_PODATKI_TABEL
  (ime_tabele VARCHAR2, st_napake NUMBER
  )
  RETURN EMPARRAY ACE
  
  
  EMPARRAY is:
  create or replace TYPE "EMPARRAY" as VARRAY (10000) OF VARCHAR2 (4000);
  
  
  I try but nothing works.
  
  THX

  Put the function calls in the clause of a query using the TABLE from:

  SQL> create or replace TYPE "EMPARRAY" as VARRAY(10000) OF VARCHAR2(4000);
    2  /
  
  Type created.
  
  SQL> create or replace FUNCTION META_PODATKI_TABEL
    2  (ime_tabele VARCHAR2, st_napake NUMBER
    3  )
    4  RETURN EMPARRAY AS
    5  begin
    6  return emparray('aaa','bbb','ccc');
    7  end;
    8  /
  
  Function created.
  
  SQL> select * from table(META_PODATKI_TABEL('x',1));
  
  COLUMN_VALUE
  ------------------------------------------------------------------------------------
  aaa
  bbb
  ccc
  

  Max
  http://oracleitalia.WordPress.com

• Read data from APEX_ITEM

  Hi all
  
  I searched the forums, and unfortunately I have no idea on how to go on the following.
  
  I have the following SQL report created with APEX_ITEM. SELECT_LIST-
  
  > select id, questions, APEX_ITEM. SELECT_LIST (p_idx = > 1, p_value = > '- Select Rating-', p_list_values = > 1, 1, 3, 3, 5, 5', p_attributes is > "style =" "color: Black;"', p_show_null = > 'YES', p_null_value = > NULL, p_null_text = > '- Select Rating-', p_item_id = > ' the ROWNUM # f01_ #', p_item_label = > ' label for ROWNUM f01_ # #', p_show_extra = > 'NO') 'Rating' of the sqa_customer_questions by id order
  
  Query runs as you like, but I don't know how to accept the values of the rows. I would like to insert the values of the selection list and their respective ID for all the entries in another table. I'm not able to find out how I could read data from these APEX_ITEMs and reach my goal.
  
  Any help is appreciated.
  
  Kind regards
  Jean-Pierre

  Nope,

  Can you put the app on apex.oracle.com

  In any case if you have a report like this

  SELECT id,
                  something
  FROM table
  

  You can do it for the

   SELECT id||APEX_ITEM.HIDDEN(2,id) id,
                  something
  FROM table
  

  And then reference it as APEX_APPLICATION. G_F02 (the first parameter provided to apex_item determine the number) in your process.

  See you soon

  Ben
  http://www.munkyben.WordPress.com
  Don't forget to mark the answers useful or correct ;)

• read data from a serial port

  Hello to everyone
  I use oracle forms 6i. I want to read data from a serial port. How can I do this?

  HII,

  You may search for any existing OCX or VBX component capable of doing this job.

  Better compliance
  Skyniazi

• Read data from the text column in report

  I have a sql report with an editable column created using apex_item.text (5);
  
  I tried to read and insert the data from the column in a table, using this process
  
  because me in 1.apex_application.g_f05.count
  loop
  insert into table (col_a, col_b)
  values (apex_application.g_f05 (i), apex_application.g_f04 (i));
  commit;
  end loop;
  end;
  
  but without success.
  
  The message when I execute is ORA-01403: no data found.
  
  What is the error?

  HI lkefur,

  Try to debug it.

  The reason behind this is that your report do not have the of4, fo5 (one) as text fields at all.

  try to delete value n f04 normal text and check, even to f05.
  I think that most probably the reason whether shud.

  You can view only the source of the page and check which names are your text fields of the report to help.

  Kind regards
  Nandini thakur.