ORA-28545 trying to get an Excel file on HS
Oracle Hello community,I installed a connection to a MySQL database already and it works fine. Now, I'm trying to read an Excel file in my oracle database, but get an error ORA-28545. Here's what I've done so far:
Oracle: 11.1.0.0.7 Windows 2008 32 bit
-Take an ODBC connection to the excel file named "MediaCode".
-new file in the folder of HS, called "initmediacode.ora" with the following entries:
HS_FDS_CONNECT_INFO = MediaCode
HS_FDS_TRACE_LEVEL = off
HS_AUTOREGISTER = TRUE
HS_DB_NAME = dg4odbc
-new listening in the file of the listener port:
LISTENER_E =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = my_host_adress)(PORT = 1522))
)
)
SID_LIST_LISTENER_E =
(SID_LIST =
(SID_DESC =
(SID_NAME = MediaCode
(ORACLE_HOME = C:\oracle)
(PROGRAM = C:\oracle\bin\dg4odbc)
)
)
-new entries in the tnsnames file:
MediaCode =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP (PORT = 1522))(HOST=my_host_adress))
(CONNECT_DATA = (SID = MediaCode))
(HS = OK)
)
-started the new "LISTENER_E", agent listener "MediaCode" is started as well.
-Make a tnsping@MediaCode, which has been successful
-Linking of database: CREATE Database Link MediaCode USING "MediaCode";
-try to run a statement against the excel file: select * from user_tables@MediaCode;
After that, I get the error:
ORA-28545: Von Net8 bei der zu einem Fehler diagnostizierter agent connection
Cannot retrieve the text of the message NETWORK/NCR 65535
ORA-02063: before 2 lines von MEDIACODE
the advice I could do?
Ikrischer
the problem, it's a hook closing missing at your disposal:
(SID_NAME = MediaCode
(ORACLE_HOME = C:\oracle)
It should be:
(SID_NAME = MediaCode)<== missing="">==>
(ORACLE_HOME = C:\oracle)
Once you have changed your listener.ora file, please stop and start the listener.
Published by: kgronau on April 20, 2010 12:18
Tags: Database
Similar Questions
-
ORA-28500 when you access an Excel file
Hello
I'm getting the dreaded ORA-28500 "optional not implemented" when you try to access an Excel file via ODBC HS. This is a bug in 11.1.0.6 (6701400), however my flavor is 11.1.0.7 fully patched. Because I'm trying to use the OLAP on Windows XP 32, I installed version 11.1.0.6 and applied the patches 6890831 and 7682184, as recommend it on [this page | http://www.oracle.com/technology/products/bi/olap/collateral/olap_certification.html], without as far as I can tell error. This should have fixed the problem with dg4odbc according to the bug page, but when now trying to access an Excel spreadsheet I get the exact same message:
Is it possible that the patch do not go as planned? Or the second patch to restore the old behavior? I am really lost at what to do now.SQL> select * from "International$"@refdata; select * from "International$"@refdata * ERROR at line 1: ORA-28500: connection from ORACLE to a non-Oracle system returned this message: [Microsoft][ODBC Excel Driver]Optional feature not implemented ORA-02063: preceding 2 lines from REFDATA
Thanks for your help,
ChrisHi Chris,
The problem is really fixed in 11.1.0.7 However you must change this setting:
HS_FDS_SUPPORT_STATISTICS = FALSE11.1.0.6, the default value of HS_FDS_SUPPORT_STATISTICS is set to 'TRUE '.
even if the trace files see the value is set to "FALSE".
In 11.1.0.7 is always 'TRUE' by default, but the trace files now show that
value.
Use DG4ODBC with Excel, requires that the value "false".I hope this helps you
Kind regards
Mireille
-
Having trouble getting an Excel file table
This will probably be a very stupid question, but I could hurt trying to get a table 2D from an Excel file? The file contains two columns of data that I want as a 2D array (or two tables 1 d) and after having tried a number of things I don't get anything up on top of my chart. The attached VI is a work in progress and has been hashed together some other work (it will be used to control scanning mirrors).
Thanks in advance,
Ben
Hi Ben,
I found an article in the Knowledge Base that relates to your specific problem. I linked it below.
Reading Microsof Excel in LabVIEW digital data
After you follow the steps in the KB, I changed the file to a text (.txt) file and was then able to read the data successfully and it draw on the XY graph using a modified version of your code that contains only the item file IO. If you make changes to your data file and then reference in the amended VI that I have attached, this will help to illustrate how you can view your data in LV
I hope this helps.
Best regards
Christian Hartshorne
NIUK
-
I have an excel database and want to use some of the information provided for thunderbird email addresses inside. I cut out infomration excel database I don't need and saved as csv. In thunderbird, I try to import the csv file - I align the name of data, surname etc. and import - thunderbird said 180 addresses imported, but no information appears on the screen. Any help much appreciated. Thank you Tim
They appear if you close and re-open the address book? The full name of the csv field is empty?
https://getsatisfaction.com/mozilla_messaging/topics/importing_windows_live_contacts#reply_8555932
-
Hello I have an email in outlook express I need to open a pdf file to, whenever I try to open the pdf file, told me that I have a SQL syntax error, how can I fix this problem
Hello
I suggest you to follow the steps in this link and check if it helps:
It will be useful.
-
I don't remember adding iTunes for Windows Live Photo Gallery, but they're stuck there and will not allow me to remove them... and on iTunes... these music files move no matter how hard I try!
You must move your iTunes library to a non-default locationlibraries folder structure so that they will not automatically be indexed.BarbMVP - Windows/entertainment and connected homePlease mark as answer if that answers your question -
Trying to get an audio file in my InDesign document
I placed a file audio mp3 in my paper, and when I select it appears in the media panel where I can play.
But when I export the document (choose "Adobe PDF (Interactive)" in the format box), the audio file is not displayed on the page. Also, when I try to use the "Preview" Panel, there isn't an overview.
I looked around adobe site and the net for a solution, but so far nothing yet. Does anyone have any suggestions?
Had the same problem. Then I realized that I needed to open PDF Acrobat Reader w! Everything was there, including the audio file. From the opening with preview (on mac), there was no audio file, but when I went to Acrobat, here. It's a universe centered on Adobe.
-
How to: same excel file, same computer, different user accounts.
I'm trying to access a single Excel file from the accounts of different users on the same computer. I tried to share the Excel file, no luck. I studied with a group residential, but which seems to be for different computers on a network home. It comes from the same computer, the same Excel file with multiple user access. Help
Thanks for your help. I tried to implement your suggestion, and most of the time, it worked.
I followed the path OS (C> users > Public > Public Documents and was able to copy the document it.)
I have it pinned to the taskbar and managed to get it back and make & save changes.
When I copied it initially the path mentioned previously it had an identical copy in the following path: > libraries > Documents > Public Documents.
Unfortunately, when I used the button "Save" it would save the file to the location of a second, but the pinned file would go to the original OS (C... way, then recover the original unedited version.) It took me a while to understand this.
If I do something wrong and you have any other advice, I'd appreciate it. But, for now, this issue has been resolved and I will so indicate.
Thank you once again
BG
-
problems with the external table to excel file
Hi all
I tried to use the statement below to create an external table.this table refers to an excel file.
CREATE TABLE EMPFRAUD_TEST
(
SERIAL_NUM WHICH VARCHAR2 (10 BYTE),
BRANCH_CODE VARCHAR2 (10 BYTE),
BUSINESS_ADD VARCHAR2 (100 BYTE),
VARCHAR2 (50 BYTE) REGION,
DATE OF TRANSACTION_DATE_TIME,
DATE OF REPORT_DATE_TIME,
NO_OF_TRANS VARCHAR2 (4 BYTE),
NUMBER OF AMOUNT,
FRAUD_TYPE VARCHAR2 (25 BYTE),
IMPACT_CATEGORY VARCHAR2 (10 BYTE)
)
EXTERNAL ORGANIZATION
(TYPE ORACLE_LOADER
THE DEFAULT DIRECTORY EXT_EMP_TEST
ACCESS SETTINGS
(records delimited by newline
BadFile "empfraud%a.bad."
logfile "empfraud%a.log".
fields completed by «,»
surrounded of possibly ' "'lrtrim"
missing field values are null
)
LOCATION ("fraud.csv")
)
REJECT LIMIT UNLIMITED
NOPARALLEL
NOMONITORING;
the problem is the following
(1) when I run the query above the table will be created,
but when I try to select in the table, an empty table display.
When I checked the error log file, the following message was given.
It was obtained from an oracle on unix Server database.
'L_NUM '.
KUP-04036: second enclosing delimiter not found
KUP-04101: Save 71 rejected in the /home/oracle/ext_folder_test/fraud.csv file
KUP-04021: field error for the field formatting ACCOUNT_KEY
KUP-04036: second enclosing delimiter not found
KUP-04101: Save 79 rejected in the /home/oracle/ext_folder_test/fraud.csv file
KUP-04021: field formatting of error for the serial_num field which
KUP-04036: second enclosing delimiter not found
KUP-04101: Save 80 rejected in the /home/oracle/ext_folder_test/fraud.csv file
column in treatment of TRANSACTION_DATE_TIME error in the row 1 for the /home/oracle/ext_folder_test/fraud.csv data file
ORA-01858: a non-digit character was found here where was waiting for a digital
column in treatment of TRANSACTION_DATE_TIME error in line 2 to the /home/oracle/ext_folder_test/fraud.csv data file
ORA-01843: not one month valid
column in treatment of TRANSACTION_DATE_TIME error on line 3 for the /home/oracle/ext_folder_test/fraud.csv data file
ORA-01843: not one month valid
column in treatment of TRANSACTION_DATE_TIME error in row 8 for the /home/oracle/ext_folder_test/fraud.csv data file
ORA-01843: not one month valid
column in treatment of TRANSACTION_DATE_TIME error in line 9 to the /home/oracle/ext_folder_test/fraud.csv data file
ORA-01843: not one month valid
column in treatment of TRANSACTION_DATE_TIME error in line 10 by /home/oracle/ext_folder_test/fraud.csv data file
ORA-01843: not one month valid
column in treatment of TRANSACTION_DATE_TIME error at line 11 to the /home/oracle/ext_folder_test/fraud.csv data file
ORA-01858: a non-digit character was found here where was waiting for a digital
column in treatment of TRANSACTION_DATE_TIME error in line 12 to the /home/oracle/ext_folder_test/fraud.csv data file
ORA-01843: not one month valid
column in treatment of TRANSACTION_DATE_TIME error in the 13th for the /home/oracle/ext_folder_test/fraud.csv data file row
ORA-01843: not one month valid
column in treatment of TRANSACTION_DATE_TIME error in line 14 to the /home/oracle/ext_folder_test/fraud.csv data file
ORA-01843: not one month valid
column in treatment of TRANSACTION_DATE_TIME error in row 15 for the /home/oracle/ext_folder_test/fraud.csv data file
"ORA-01843: not one month valid."
pls I need help to fix it fast
Thank you
concerning
Abdulrahman olayide arpin
NB:
After the conversion to .csv format.
HERE IS THE DATA THAT I'M TRYING TO ACCESS THE EXCEL FILE
REGIONS, Transaction_Date_Time, Report_Date_Time, Account_Key (account number), BUSINESS OFFICE, Number_of_Transactions, Total_Amount (N)
Ojo 1,162,9 Street, South of Lagos, various, 17 January 00, CHECK
2,0238, "10 cyril Road, Enugu", Orient, 21/06/2006,23/12/10,020968765357 09867653920174,1,20000000
3,0127, '261, Roland Rd, Asaba', Midwest, 22/12/2010,23/12/10, 1,'00160030006149, 6000000
4,0519, 'just road, Onitsha.
', East, 12/03/2010,14/02/11,0896002416575,1,5000000.
5,0519, 'just road, Onitsha.
", Orient, 03/12/2010,14/02/11,06437890134356,1,5000000.
6 149, rue olayide, South NGN01492501036 of Lagos, 10/02/2010,17/02/11, 1,6108950
7,0066, wale, mi - west,18/02/2011,18/02/10,'05590020002924,1,55157977.53
8.66, john, Mid-west, 6787500, 1,'00660680054177 11/03/2010,14/03/09
Waheed 9,0273, Biem, N/central, Jan 09 Dec/2010,01/04/11, Nile, 1, 14146040
-
I bought the program to convert PDF files to Word, Excel, files etc. I am logged in and try to convert a word file as an Excel file. It shows that I am connected to my account, I guess, (it shows my name at the top) and I clicked the export file, choose the file to convert, click Excel in the box, to convert language was English, then click the Convert button blue. It looked like it was working, then in seconds, said that I was not connected to the internet. I tried to do this several times (on two different days) and get the same message, not connected to the internet. I am connected to internet, I go to my browser and load anything.
Thanks for any help! I feel desperate to get this project underway.
Check your hosts file.
help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-
error trying to connect to an excel file into oracle
Hello, I'm trying to create an ODBC module within the Warehouse Builder to connect to an excel file,
but I get this error message when creating the location.
ORA 28500: Connection between Oracle and a system non-Oracle return this message name [Microsoft] [ODBC Driver Manager] Data Source not found and no default driver specified. {IM002}.
Can you please guide me, because I really need help. Please ask me anything they have to provide.
You have configured SYSTEM ODBC DSN? What's his name? Could you also post the gateway init file?
Thank you
Klaus
-
ORA-28545-error when trying to connect to a MSSQL DB
Like many others, I came across problems trying to connect to a MSSQL-DB. I tried various things mentioned in the forum, but nothing helped.
I did the following:
On Windows INFORDBSERVER02 servers where our Oracle11-Installation is hosted, I installed the software bridge in a different location.
During installation, I decided to use the port 1531 for the listener, and then asked me about the connection parameters to our MSSQL Server:
Our database is located on the 'profileserver02' server and the DB is called 'profile', but there was an entrance third (for me unknown) and I gave him the same value
as the name of the server.
The listener has started and there was a listener.ora with the following entries:
LISTENER_PROFILE =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = INFORDBSERVER02.fmbb.local)(PORT = 1531))
(ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1531))
)
)
ADR_BASE_LISTENER_PROFILE = D:\Ora_GW
I then checked the initdg4msql.ora, which had entries
HS_FDS_CONNECT_INFO = [profileserver02] / profileserver02/profile
HS_FDS_TRACE_LEVEL = OFF
HS_FDS_RECOVERY_ACCOUNT = RECOVERY
HS_FDS_RECOVERY_PWD = RECOVERY
On the server where I want to get access, I've added an entry for the tnsnames.ora:
dg4msql.INFORDBSERVER02 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = INFORDBSERVER02.fmbb.local)(PORT = 1531))
(CONNECT_DATA =
(SID = dg4msql)
(GLOBAL_DBNAME = dg4msql.INFORDBSERVER02)
)
(HS = OK)
)
Finally, I created a link DB:
CREATE DATABASE LINK PUBLIC profile02 CONNECT TO "anw' IDENTIFIED BY 'password' USING 'dg4msql.infordbserver02 '.
I tried to access the DB in issueing of position
Select * from dual@profile02
I got the errormessage:
Error: ORA-28545: Von Net8 bei der zu einem Fehler diagnostizierter agent connection
Cannot retrieve the text of the message NETWORK/NCR 65535
ORA-02063: before 2 lines von PROFILE02
SQLState: 99999
ErrorCode: 28545
Position: 19
I changed one line in the listener.ora, namely
HS_FDS_CONNECT_INFO = //profile [profileserver02]
that got rid of this third unknown parameter, but nothing has changed...
I tried to use the listener.ora.sample in the dg4msql directory
LISTENER =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = tcp (PORT = 1531))(HOST=localhost))
)
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = dg4msql)
(ORACLE_HOME = D:\Ora_GW)
(PROGRAM = dg4msql)
)
)
#CONNECT_TIMEOUT_LISTENER = 0
but then the listener has not yet started.
Any tips?
For the first listener that you posted you do not have a section of SID. So he won't be able to lay a bridge. In addition, it would be easier when you use the earpiece of the spawn House door entrance to the gateway process o gateway.
So put a listener.ora file at your home, gateway network\admin with this content:
LISTENER =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = tcp (PORT = 1531))(HOST=localhost))
)
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = dg4msql)
(ORACLE_HOME = D:\Ora_GW)
(PROGRAM = dg4msql)
)
)
Then stop the LISTENER_PROFILE listener, open a DOS window and correctly set the ORACLE_HOME. Change to D:\Ora_GW\bin and start the listener using lsnrctl start.
What I don't understand is your comment:
"
I changed one line in the listener.ora, namely
HS_FDS_CONNECT_INFO = //profile [profileserver02] '.
I assume you are talking about initdg4msql.ora...
So let's just check the link if it works...
If not, please provide a status of Auditor for the listener of the entry door and an exit of tnsping from home using "tnsping dg4msql.INFORDBSERVER02" database Oracle
-Klaus
-
How to get data from an Excel file exist using report generation tools
I try to use the Excel vi get the data of the report generation tool, but I can't understand how to activate a path can be explored in the right type for the VI. I tried to use the new Report.vi, but this does not work unless you use a template. It will not open an existing excel file and make an open report to extract data from.
Essentially, I have a bunch of excel files that have data in them, and I want a VI allows to analyze the data. I'm going to pull in all the data directly from the excel file so I don't have to reproscess them all in text so I can use the more standard datasheet live but to convert even the excel file programtically in labview I still need to be able to open the excel file and get the data?
I found my problem. It turns out that only not to have had a problem with the tool box new report vi. I had accidentally wired an input control of path of folder instead of an input control of path of file to it. Changing the file type took care of her and I was able to access excel files, I tried using the new report VI to extract the file, and Excel Get Data to extract the data.
-
Whenever I open an Excel file, I get a pop for Windows Installer
Original title: Windows Installer
Every time I open an existing Excel file, Windows Installer opens first, there is a significant delay and opens the Excel file. What is the solution to get out of the process of opening Excel from Windows Installer files? I don't see Windows Setup in the control panel so I can't remove it.
Thank you
Hi Phil,
Windows Installer tries to configure excel on your system.
Click Start-> settings-> Control Panel-> Add/Remove Programs-> Microsoft office-> change-> add/remove component-> select excel, then click on run from my computer.
Once its finished installation-> start excel from start-> programs-> excel (or in Microsoft office-> Excel).
Let the full installation. Close excel and open your files.
I hope this helps.
-
The Task Manager - I'm trying to get rid of the programs and files unnecessary
I have more than 140 lines of running abuse. I'm trying to get rid of the programs and unnecessary files.
When I am online the cpu is also the diagrams, and it doesn't take long before his stop at all
Terry c
Hello
Use the clean boot method and Process Explorer to determine what are these services and, if applicable
ask questions. Of course, check out the other methods as well to help improve the system
performance.What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3Hope these helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
Maybe you are looking for
-
Hello I have a 8100, but suddenly he is unbootable. My screen remains black.Only when I start with F12, I get the message "Ready for bios update...» ». But when I insert a bios floppy disk (disk image downloaded from toshiba) he does not see the upda
-
Windows 8.1 damaged OS recovery CD
Hello I just bought a new ultrabook of carbon X 1. It has been pre-installed with Windows 7, but I need 8.1 Windows pro 64-bit. However, my 8.1 pro 64-bit windows recovery DVD is damaged. How can I get another or downlod content and burn it to a DVD-
-
I want to keep up my vista, but first I want to clean my hard drive, I don't have to return to the top of the original, it is possilble
-
Create a link to the file Edge animate in Muse
Hi I have updated an Animation on board. I already put it in a Muse file that has not yet been published. The animation has been refined a bit and now the changes not reflected in the file of Muse. I was wondering if this is possible. I thought I saw
-
Hi, how many machines you are allowed to install the software CC on? I just bought on with student award, but I have two computers.