the connection failed

Similar Questions

• Try to update Shockwave Flash; It downloads, but when I click on install; the connection fails? WHY not the connection?

  Update of Adobe Reader, Shockwave Flash and Java used to be so easy... until a year ago. Now, I hate when I run the Plugin Firefox check, only to see the UPDATE. I seem to be able to download ("initialization") the app, but when I go to INSTALL (I hope I have the right words), it indicates that the CONNECTION FAILED. Try again. THE CONNECTION HAS FAILED. CLICK FINISH TO RESTART THE INSTALLATION PROCESS. It became a cycle without end I contacted my internet provider (and going through their process of reboot) I'm connected to the Internet. I disabled my anti-virus prgm and my firewall; nothing seems to help. Last time I could actually INSTALL one of the programs/applications above, I did it with the help of ' solving problems when you use Firefox "... and who let me download,... but I can't find a selection like this now... it's why I write for Firefox/Mozilla.
  I have been using Firefox for about 5-6 years now, and I love it! Except for these issues. I'm not a dummie, but not a geek either... I just need help.

  • See Flash Plugin - maintain and troubleshoot
  • Use the adobe page
    http://www.Adobe.com/software/Flash/about/
    At the same time check the version installed, and which is the latest available versions.

  You have a version 17 for what is very recent and are perhaps the most recent and up to date. The latest version is currently 17.0 v. 0.188

  There may be some small problem with the auditor to update Firefox rather than with your updates.

  • The Firefox Plugin checker is available in the page manager addons or use this link
    Mozilla.org/pluginCheck/

• I try to connect my apple TV.  I've been up to signature in ITunes but got the message that the connection failed because the network time has not been set.  I don't know what I should do.  Thanks in advance.

  I try to connect my apple TV.  I've been up to signature in ITunes but got the message that the connection failed because the network time has not been set.  I don't know what I should do.  Thanks in advance.

  Date and me are dealt with by the network. Try restarting your router/modem...

  Verify that DNS is set to auto

  Make sure port 123 is open on the router (refer to the manual of the router to you)

• PowerCLI script > how to show exit if the connection fails.

  Hello

  I found Googling below script.

  The script works fine, but I need more output, if the connection fails when an incorrect user VM account.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  $vms = GET - VM |  Where-Object {$_.} PowerState - eq "Receptor"}

  ForEach ($vm to $vms)

  {

  If (Get-VMguest - VM $vm |) Where-Object {$_.} ({OSFullName-like "* Microsoft *"})

  {

  Invoke-VMScript - VM $vm - GuestUser 'administrator' - GuestPassword 'vmware1!' - ScriptText "= driver sc query type | "find" "vsepflt'" ' bat - ScriptType | format-list name, ScriptOutput, vm

  }

  }

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  I want to see the output like this...

  .\SCRIPT.ps1

  VM: VM1

  ScriptOutput: Service_Name: vsepflt

  VM: VM2

  ScriptOutput: Connection failure

  Thank you.

  You can capture exceptions with a Try-Catch construct.

  Something like this for example

  $vms = GET - VM |  Where-Object {$_.} PowerState - eq "Receptor"}

  ForEach ($vm to $vms)

  {

  If (Get-VMguest - VM $vm |) Where-Object {$_.} ({OSFullName-like "* Microsoft *"})

  {

  try {}

  $out = Invoke-VMScript - VM $vm - GuestUser 'administrator' - GuestPassword ' vmware1! "

  ScriptText-"= driver sc query type | "find" "vsepflt'" ' ScriptType - bat - ErrorAction Stop |

  Select ScriptOutput - ExpandProperty

  }

  {} Catch [VMware.VimAutomation.ViCore.Types.V1.ErrorHandling.InvalidGuestLogin]

  $out = "invalid logon.

  }

  catch {}

  $out = "another error".

  }

  Write-Output "VM: $($vm.). "Name): $out.

  }

  }

• Import metadata connects in online mode, but "view data" says the connection failed

  Hello

  My installation of obiee is on AIX (solutions for linux will be good). I installed successfully obiee. I created a connection odbc with no problems.

  I download and installed the dev admin too i.e. the stand-alone tool.

  Offline, the two 'import metadata' and after the table is imported, 'Examining the data' works without any problem.

  In online mode, I click on 'Import metadata' of the connection pool or file, both instantly connect. Once the table is imported, I select a column and say "Look at the data" and it says that the connection failed. Should the customer Oracle DB installed on the machine as unix? I tried to copy the file tnsnames.ora to my local computer to the OracleBI_1/network/admin directory, restart services and connected in online mode, BUT always "the connection failed".

  Could someone help me with this please? seems to be a known issue.

  Thank you

  Dan

  YES for the Oracle client.

  Check this parameter to the top of the Data Sources on Linux and UNIX - 11 g Release 1 (11.1.1)

  You can copy the admin folder or completely ignore

• ORA-28546: initialization of the connection failed, probable Net8 admin error

  I'm unable to access DB SQL Server to Oracle

  ERROR on line 1:

  ORA-28546: initialization of the connection failed, probable Net8 admin error

  ORA-02063: preceding the line of ODBC

  Please suggest? Here are the details:

  DBlink is

  Create the link to ODBC database to connect to 'his' identified by "orcl" using "master";

  File D:\app\admin\product\11.2.0\dbhome_1\hs\admin has initMaster.ora

  HS_FDS_CONNECT_INFO = master

  HS_FDS_TRACE_LEVEL = OFF

  ORACLE_HOME (D:\app\admin\product\11.2.0\dbhome_1\NETWORK\ADMIN) file has listener.ora and tnsnames.ora as follows:

  1. tnsnames.ora:

  tnsnames.ora # Network Configuration file: D:\app\admin\product\11.2.0\dbhome_1\network\admin\tnsnames.ora

  # Generated by Oracle configuration tools.

  LISTENER_ORCL =

  (ADDRESS = (PROTOCOL = TCP) (HOST = FILT137)(PORT = 1521))

  ORACLR_CONNECTION_DATA =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))

  )

  (CONNECT_DATA =

  (SID = CLRExtProc)

  (PRESENTATION = RO)

  )

  )

  ORCL =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = FILT137)(PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = orcl)

  )

  )

  Master = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=FILT137) (PORT = 1521)) (CONNECT_DATA = (SID = master)(HS=)))

  #Master = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=FILT137) (PORT = 1522)) (CONNECT_DATA = (SID = Master))(HS=OK))

  1. Listener.ora:

  listener.ora # Network Configuration file: D:\app\admin\product\11.2.0\dbhome_1\network\admin\listener.ora

  # Generated by Oracle configuration tools.

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (SID_NAME = CLRExtProc)

  (ORACLE_HOME = D:\app\admin\product\11.2.0\dbhome_1)

  (= Extproc PROGRAM)

  (ENVS = "EXTPROC_DLLS=ONLY:D:\app\admin\product\11.2.0\dbhome_1\bin\oraclr11.dll")

  )

  )

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))

  (ADDRESS = (PROTOCOL = TCP) (HOST = FILT137)(PORT = 1521))

  )

  )

  ADR_BASE_LISTENER = D:\app\admin

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (SID_NAME = master)

  (ORACLE_HOME=D:\app\admin\product\11.2.0\dbhome_1)

  (PROGRAM = dg4odbc)

  )

  )

  Problem-

  ORA-28500: connection between ORACLE and a non-Oracle system has sent this message:

  [Microsoft] [ODBC driver manager] The specified DSN contains an architecture

  incompatibility between the driver and the Application {IM014}

  Solution-

  Made 'Master' DSN for 64-bit and 32-bit help following and it resolved.

  For 64-bit ODBC locates here (c:\windows\system32\odbcad32.exe).

  For 32-bit ODBC locates here (c:\windows\sysWOW64\odbcad32.exe)

• Not able to connect to MWAGUI. Telnet works, but MWAGUI in error "the connection failed". Help, please...

  Not able to connect to MWAGUI

  Telnet works, but MWAGUI giving the error "connection failed". Help, please...

  We bounced back the application and services many times MWA. Also, we have disabled enabled several port but no solution yet.

  There are 3 work of the plates for MWA GUI on the Windows Machine.

  Patch # 12574324 for 11i

  Patch # 12780257 for 11i

  Patch # 20983924 for R12

  All these patches work on Windows 7 and 8, with all versions of Java.

  The first two patches for 11i work on R12 also but with a minor problem. When you press tab even though visually the cursor moves to the next field, but in reality, it remains in the previous filed and what you enter is taken as a stream in the previous field. The replacement of the tab in the first two tasks is .

  To solve this problem the 3rd patch was created, which is the latest patch to work for R12 too but this patch after a few ORS and Patch requests (other modules) does not work anymore and gives the error "unable to connect". The first two patches can be used s a solution until a new patch coming to replace 20983924.

  Please note that CMD/batch of all three patches files is performed differently, so follow the guideline strictly for the respective patch.

  Kind regards

  Pierre Paul

• Request to another DNS server if the connection fails with the current

  Hello

  I would like to ask whether there is an available addon or a feature hidden in Firefox, which allows him to activate try to use other DNS servers if a connection has failed to a server. Lets make an example, would be the best way to explain:

  1. I want to connect to Google.com
  2 Firefox / Windows prompts for the IP address of the DNS server
  3 Firefox attempts to connect to Google but fails (the site had long to answer, for example)
  4 Firefox will try another DNS server, that you entered in your Page of DNS IPv4

  Or Firefox already do this? Because sometimes it fails to connect to a server when you use a special DNS server. If I change the settings to another DNS server, it works.

  Thank you

  Please upgrade to version 20.

• Checking the connection failed for the source of data on port 1433

  Try to set up a DSN for a database of SQL Server on a new computer and it fails every time.

  Connection verification failed for data source: csf

  java.sql.SQLNonTransientConnectionException: error [Macromedia] [SQLServer JDBC Driver] establishing socket to host and port: SANDYPC:1433. Reason: Connection refused: connect

  The root cause was that: java.sql.SQLNonTransientConnectionException: error [Macromedia] [SQLServer JDBC Driver] establishing socket to host and port: SANDYPC:1433. Reason: Connection refused: connect

  Now, when I installed the CF 11, it is installed on port 8500.  However, when I try to change the port in the configuration to 8500, I get this error:

  • Connection verification failed for data source: csf
    java.sql.SQLException: timed out trying to establish connection
    The root cause was that: java.sql.SQLException: timed out trying to establish connection

  I can't find anything online about how to solve this problem!  Help!

  Hello

  Is that SQL Express edition? If so maybe TCP protocol is not enabled. Windows Firewall is enabled? Check port 1433 is open.

  Normally you would not create a data source to the apache 8500 port, which is a web server not Database not the port of the server.

  HTH, Carl.

• Add the connection fails after you set up for access to SQL Server

  I am under SQL Developer 1.5.5, who installed with Oracle 11.2.0.4 database Client.  I downloaded jdts - 1.3.1.jar and added its location in tools > Preferences > database > Third Party JDBC Driver (add entry) to set up the ability to access SQL Server.  Now I can't have a dialog box open when I try to add connections.  Anyone has any ideas, please?

  Yes.

  1.5.5 is really old.

  The 1.3 jar works with version 4.0 of the SQL Developer.

  You can get the pot 1,2 - I think that it will work with 1.5, or you can obtain a newer version of SQLDev off the coast of the RTO and use the CONTAINER of 1.3. I highly recommend if the latter.

• authentication Active Directory iDrac 6 - test ok but the connection failed

  Hi all

  I try to activate the AD authentication on my iDrac6 (v1.97).

  When I run the test after you have configured it, everything is ok. But when I try to log in with the ad on iDrac user I've always had a "connection error. Failure of the credentials. Please Try Again ".

  Am I missing something? I have to active anything else? Where can I get more newspaper?

  Thank you in advance for any help

  --

  Alex

  My bad, it was a certificate error which seems was not a problem for the tests, but was a true for connection...

  Now, everything works fine now

• Webcam Live mail error msg connection failed in the outgoing message

  Whenever I try to send e-mail with windows live mail, I get an error 25 and the connection failed. If I delete the outgoing msg, connects immediately. I see other people with the same problem.

  For problems with Windows Live Mail, please ask your question in the Windows Live Mail Discussion Group at: http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?dg=microsoft.public.windows.live.mail.desktop where this product experts will be happy to help you.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The database connection failed while creating DataSource in Hyperion planning.

  Hi all

  I installed it and configured Hyperion Planning 11.1.2.4 and also apply the planning Patch 20937926 (Hyperion Planning 11.1.2.4.002) successfully.  When I'm creating the Source of data for planning its getting failed with reason "the connection failed" here is the screenshot of the same thing.

  

  Here is what is is connected in the logfile (C:\Oracle\Middleware\user_projects\epmsystem5\diagnostics\logs\services\HyS9Planning_epmsystem5-DD)

  
  < 18 January 2016 5:56:53 PM PST > < WARNING > < oracle.dms.context > < DMS-57008 > < the execution context put in place at the beginning of the request, 00iY3lrJCEoFw00Fzzw0w00000pC00028j, 0:1, is not the execution context at the end of the request, the 00iY3lq9ghBFw00Fzzw0w00000pC00028U, the 0:1:4. The request is the following: request URI:
  /HyperionPlanning/ADFAppWizard.jsp
  The request URL:
  http://agiph1epma.aagc.corp:19000/HyperionPlanning/ADFAppWizard.jsp
  (No query string)
  All header names:
  Accept, Accept-Language, Referer, User Agent, Content-Type, accept-encoding, host, Content-Length, connection, Cache-Control, Cookie, ECID-context, X-Forwarded-For, Proxy-Client-IP, X-WebLogic-KeepAliveSecs, X-WebLogic-Force-JVMID
  Selected header values:
  ECID-background: 1.00iY3lrJCEoFw00Fzzw0w00000pC00028j; kXjE0ZDLIPHMj8HUkLQSdVQRGSPOiUPQiNRB1KIH1GSSNPQUXISPiARSkG
  Accept-Language: en-US
  Host: agiph1epma.aagc.corp:19000
  Content-Length: 584
  Accept-Encoding: gzip, deflate
  Referer: http://agiph1epma.aagc.corp:19000/workspace/cache/2016-01-18_02-40-31/bpmstatic/thirdparty/bindows/html/blank.html?X-ORACLE-BPMUI-CSRF=D94524A8AA7DC623860541EBDDA20EAFBD99F3126088E3B74518546FFD5A84CF2EFCFDDE8C389BD9ED9232B31164972ECEBD6AE33B625120F6FAD7E40E7D3C98
  User-Agent: Mozilla/5.0 (Windows NT 6.3; WOW64; Trident/7.0; RV:11.0) as the Gecko
  Connection: Keep-Alive
  Content-Type: application/x-www-formulaires-urlencoded
  Accept: text/html, application/xhtml + xml, * / *.
  >

  
  < 18 January 2016 5:56:55 PM PST > < error > < oracle.jbo.uicli.mom.JUApplicationDefImpl > < BEA-000000 > < views. DataBindings.cpx and view. MemberSelectorDataBindings.cpx use the same usageId: view_MemberSelectorViewPageDef
  FIX: Use view_view_MemberSelectorViewPageDef as the usageId in sight. DataBindings.cpx >
  < 18 January 2016 5:57:01 PM PST > < WARNING > < org.apache.myfaces.trinidadinternal.skin.SkinCSSDocumentHandler > < BEA-000000 > < not a rule @agent valid CSS property: max-version: 1.9.2 >
  < 18 January 2016 5:57:01 PM PST > < WARNING > < org.apache.myfaces.trinidadinternal.skin.SkinCSSDocumentHandler > < BEA-000000 > < not a rule @agent valid CSS property: max-version: 532 >
  < 18 January 2016 5:57:01 PM PST > < WARNING > < org.apache.myfaces.trinidadinternal.skin.SkinCSSDocumentHandler > < BEA-000000 > < not a rule @agent valid CSS property: max-version: 1.9.2 >
  < 18 January 2016 5:57:01 PM PST > < WARNING > < org.apache.myfaces.trinidadinternal.skin.SkinCSSDocumentHandler > < BEA-000000 > < not a rule @agent valid CSS property: max-version: 532 >

  
  < 18 January 2016 5:57:03 PM PST > < warning> < oracle.dms.context > < DMS-57008 > < the execution context put in place at the beginning of the request, 00iY3lrjnIKFw00Fzzw0w00000pC00028m, 0:1, is not the execution context at the end of the request, the 00iY3lq9ghBFw00Fzzw0w00000pC00028U, the 0:1:4:3. The request is the following: request URI:
  / HyperionPlanning/faces/AppWizardMain
  The request URL:
  Http://agiph1epma.aagc.corp:19000 / HyperionPlanning/faces/AppWizardMain
  Query string:
  _afrLoop = 514090508592 & _afrWindowMode = 0 & app = & _adf.ctrl - State = gsvzi1859_4
  All header names:
  Accept, Referer, Accept-Language, User-Agent, accept-encoding, host, Cookie, ECID-context, connection, Proxy-Client-IP, X-Forwarded-For, WebLogic-X-KeepAliveSecs, X-WebLogic-Force-JVMID
  Selected header values:
  ECID-background: 1.00iY3lrjnIKFw00Fzzw0w00000pC00028m; kXjE0ZDLIPJNj8HUkLQSdVQRGSPOiUPQiNRBaHRO_JVB1GSSNPQUXISPDHPQiG
  Accept-Language: en-US
  Host: agiph1epma.aagc.corp:19000
  Accept-Encoding: gzip, deflate
  Referer: http://agiph1epma.aagc.corp:19000 / HyperionPlanning/faces/AppWizardMain? Application =
  User-Agent: Mozilla/5.0 (Windows NT 6.3; WOW64; Trident/7.0; RV:11.0) as the Gecko
  Connection: Keep-Alive
  Accept: text/html, application/xhtml + xml, * / *.
  >

  
  < 18 January 2016 5:57:11 pm PST > < WARNING > < oracle.adfinternal.view.faces.renderkit.rich.RegionRenderer > < ADF_FACES-60099 > < component in the region with the id: plnTmpl:awRgn found a page with several components of root fragment. More fragments of a root element may not display properly in a region and can have a negative impact on performance. It is recommended that you restructure the page fragment to have a single root element. >
  
  < 18 January 2016 5:57:13 PM PST > < WARNING > < oracle.dms.context > < DMS-57008 > < the execution context put in place at the beginning of the request, 00iY3lsg08ZFw00Fzzw0w00000pC00028q, 0:1, is not the execution context at the end of the request, the 00iY3lq9ghBFw00Fzzw0w00000pC00028U, the 0:1:4:3. The request is the following: request URI:
  / HyperionPlanning/faces/AppWizardTF/AppWizardMain
  The request URL:
  Http://agiph1epma.aagc.corp:19000 / HyperionPlanning/faces/AppWizardTF/AppWizardMain
  Query string:
  _adf. CTRL-State = gsvzi1859_11 & Adf-Rich-Message = true & unique = 1453168633033 & oracle.adf.view.rich.STREAM = plnTmpl:awRgn:0:pc1:appTbl & javax.faces.ViewState =! hf4m74xtc
  All header names:
  Accept, Referer, Accept-Language, User-Agent, accept-encoding, host, Cookie, ECID-context, connection, Proxy-Client-IP, X-Forwarded-For, WebLogic-X-KeepAliveSecs, X-WebLogic-Force-JVMID
  Selected header values:
  ECID-background: 1.00iY3lsg08ZFw00Fzzw0w00000pC00028q; kXjE0ZDLIPGRj8HUkLQSdVQRGSPOiUPQiNRBaHRO_JVB1GSSNPQUXISPKMJB1GSSNPQUXISPDHPQiG
  Accept-Language: en-US
  Host: agiph1epma.aagc.corp:19000
  Accept-Encoding: gzip, deflate
  Referer: http://agiph1epma.AAGC.Corp:19000/HyperionPlanning/faces/AppWizardMain?_adf.CTRL-State=gsvzi1859_4
  User-Agent: Mozilla/5.0 (Windows NT 6.3; WOW64; Trident/7.0; RV:11.0) as the Gecko
  Connection: Keep-Alive
  Accept: text/html, application/xhtml + xml, * / *.
  >

  Can someone help me how to solve this problem.

  Kind regards

  VJ

  If it is an Oracle database, you connect to so be, you must enable the custom URL and change the url to server connection: port: sid to the server: port / servicename

  Also you can get better Planning_WebApp.log that is located in the directory the plannning managed server logs the log information.

  See you soon

  John

• RALink rt5390r wireless guard give up the connection

  I have the Office of CTO H8-1540 8.1 Windows running.  This machince has been bundled with Windows 8 and I experienced the same behavior on the two OS'.  I have no problem getting a connection, but I can't keep the connection.  I have a RT5390R of RALINK 802.11bgn card with the version of the driver from 5.00.37.000.

  This machine and master connects to an Actiontec MI424WR Rev I have router.  On a wired connection, I get 75Mo down and 37MB upwards.  The wireless connection is only 44.5 MB donw and 38.7 upward.  Troubleshooting of Windows usually fixes the problem if I'm on the PC.  The connection failed twice when entering this question on the Web site.  I would also add that I have 2 other laptops HP, who do not have this problem.  I have also 3 Android devices and 2 Apple products that do not have questions to stay connected.

  HP has replaced the RT5390R wireless card in my destop and returned the PC yesterday; 4 June 2014.  The PC has been on my local network 24 hours at this point, which would be longer that I never saw him standing in the past of 23.5 hours.  I am considering whether the resolution.

  For those past the warranty, I would suggest adding a product of reliable wireless alternative to replace the RT5390R.  If your PC is still under warranty, contact HP before the expiration of the warranty.

• connection failed

  Hi I am facing a problem in the connection failed on the confrontation of the clan.

  I am using two game Center account, sometimes I spend it if I need to play my other account.

  but since now I have a problem that I can not open and show in my screen is the connection failed.

  kindly please help me to solve this problem as soon as possible.

  Thank you.

  That's what got the super cell information.

  I have linked to the Game Center, but my village isn't loading!

  Let's start first of all, please make sure that you connect to the correct Game Center account. In the case of the lost village, it is extremely important to use the correct credentials when you connect. If you can't invite your village desired with the email address you are using now, it means that you do not use the right one.

  To properly access your village, please:

  (1) connection using the initially used e-mail address to synchronize your account

  (2) if it is an old email, contact Apple support to retrieve your account information.

  Supercell is unable to access information related to your Game Center account, so we need the help of you and Apple to find the details of correct connection that will allow you to recover your village.