Oracle 10.2.0.1 on RHEL 5

Similar Questions

• What are the steps to perform when the IP changes for Oracle EBS 12.1.3 on RHEL 6

  Hello

  We have Oracle EBS 12.1.3 installed on RHEL 6 with Oracle short built-in extensions.

  Now the server IP address will change.

  Wanted to know the steps to take if the IP address changes so that our instance is running.

  Thanks in advance.

  Thank you

  Patricia

  See MOS Doc 751328.1

• Oracle DB Migration of AIX to RHEL platform

  How can I migrate my db from AIX to RHEL oracle with minimal down time.
  

  Check the MOS Document: -.

  Migration of an Oracle database in the OS (generic platform) (Doc ID 733205.1)

  Note to master for the upgrades of Oracle database and migration (Doc ID 1152016.1)

  Version of the database of reference in next time.

• problems when installing ORACLE 10 g R2 RAC on RHEL 5.3

  I want to install oracle 10g R2 RAC on RHEL 5.3 in a test environment. My goal was to install using ASM.
  I went through ok prerequisites before starting the installation.
  Since RHEL 5.3 does not support raw devices, I used
  http://www.idevelopment.info/data/UNIX/Linux/LINUX_ConnectingToAniSCSITargetWithOpen-iSCSIInitiatorUsingLinux.shtml#configure%20iSCSI%20Initiator%20and%20New%20Volume
  
  udev to configure shared storage. my storage is on openfiler as an iSCSI target.
  
  fdisk-l on both nodes shows the shared disks.

  [root@node1 ~]# fdisk -l
  
  Disk /dev/sda: 21.4 GB, 21474836480 bytes
  255 heads, 63 sectors/track, 2610 cylinders
  Units = cylinders of 16065 * 512 = 8225280 bytes
  
     Device Boot      Start         End      Blocks   Id  System
  /dev/sda1   *           1          13      104391   83  Linux
  /dev/sda2              14        2053    16386300   8e  Linux LVM
  /dev/sda3            2054        2372     2562367+  82  Linux swap / Solaris
  
  Disk /dev/sdd: 10.5 GB, 10502537216 bytes
  64 heads, 32 sectors/track, 10016 cylinders
  Units = cylinders of 2048 * 512 = 1048576 bytes
  
     Device Boot      Start         End      Blocks   Id  System
  /dev/sdd1               1       10016    10256368   83  Linux
  
  Disk /dev/sdb: 10.5 GB, 10536091648 bytes
  64 heads, 32 sectors/track, 10048 cylinders
  Units = cylinders of 2048 * 512 = 1048576 bytes
  
     Device Boot      Start         End      Blocks   Id  System
  /dev/sdb1               1       10048    10289136   83  Linux
  
  Disk /dev/sdc: 10.5 GB, 10536091648 bytes
  64 heads, 32 sectors/track, 10048 cylinders
  Units = cylinders of 2048 * 512 = 1048576 bytes
  
     Device Boot      Start         End      Blocks   Id  System
  /dev/sdc1               1       10048    10289136   83  Linux
  
  Disk /dev/sdf: 10.5 GB, 10569646080 bytes
  64 heads, 32 sectors/track, 10080 cylinders
  Units = cylinders of 2048 * 512 = 1048576 bytes
  
     Device Boot      Start         End      Blocks   Id  System
  /dev/sdf1               1       10080    10321904   83  Linux
  
  Disk /dev/sde: 10.5 GB, 10502537216 bytes
  64 heads, 32 sectors/track, 10016 cylinders
  Units = cylinders of 2048 * 512 = 1048576 bytes
  
     Device Boot      Start         End      Blocks   Id  System
  /dev/sde1               1       10016    10256368   83  Linux

  [root@node1 ~]# ls -l /dev/iscsi/arpl*
  /dev/iscsi/arpl1:
  total 0
  lrwxrwxrwx 1 oracle oinstall  9 Jun 30 12:58 part -> ../../sde
  lrwxrwxrwx 1 oracle oinstall 10 Jun 30 12:58 part1 -> ../../sde1
  
  /dev/iscsi/arpl2:
  total 0
  lrwxrwxrwx 1 oracle oinstall  9 Jun 30 12:58 part -> ../../sdd
  lrwxrwxrwx 1 oracle oinstall 10 Jun 30 12:58 part1 -> ../../sdd1
  
  /dev/iscsi/arpl3:
  total 0
  lrwxrwxrwx 1 oracle oinstall  9 Jun 30 12:58 part -> ../../sdb
  lrwxrwxrwx 1 oracle oinstall 10 Jun 30 12:58 part1 -> ../../sdb1
  
  /dev/iscsi/arpl4:
  total 0
  lrwxrwxrwx 1 oracle oinstall  9 Jun 30 12:58 part -> ../../sdc
  lrwxrwxrwx 1 oracle oinstall 10 Jun 30 12:58 part1 -> ../../sdc1
  
  /dev/iscsi/arpl5:
  total 0
  lrwxrwxrwx 1 oracle oinstall  9 Jun 30 12:58 part -> ../../sdf
  lrwxrwxrwx 1 oracle oinstall 10 Jun 30 12:58 part1 -> ../../sdf1
  [root@node1 ~]# 

  Configure the results of udev in the drives mapped to the names of persistent drive for example. / dev/iSCSI/arpl1/part1
  always when I enter the name of the raw device that I created I get the following error. Help, please
  
  Image:! http://img91.imageshack.us/img91/7448/Oracle.PNG!

  did you check that
  http://download-West.Oracle.com/docs/CD/B19306_01/install.102/B14203/storage.htm#BABBHECD
  http://download.Oracle.com/docs/CD/B28359_01/install.111/b28263/storage.htm#CDEBFDEH

  also before making what is proposed on the url posted by Mufalani.
  It seems that you should do the following:

  Verify the existence of udev mapping rule file /etc/udev/rules.d/60-raw.rules brute
  On HR/EL5, gross udev mapping rule file /etc/udev/rules.d/60-raw.rules must exist by default as part of the util-linux package, for example:

  # ls /etc/udev/rules.d/60-raw.rules
  /etc/udev/rules.d/60-raw.rules
  

  Create a custom gross udev mapping rules file, /etc/udev/rules.d/61-oracleraw.rules say, for example:

  # touch /etc/udev/rules.d/61-oracleraw.rules
  

  3B. Add raw udev binding rules to the /etc/udev/rules.d/61-oracleraw.rules file
  Add the binding rules gross udev in the etc/udev/rules.d/61-oracleraw.rules file, for example:

  # cat /etc/udev/rules.d/61-oracleraw.rules
  # Raw bind to Oracle Clusterware devices
  ACTION=="add", KERNEL=="sd*", PROGRAM=="/sbin/scsi_id", RESULT=="360a98000686f6959684a453333524174", RUN+="/bin/raw /dev/raw/raw1 %N"
  ACTION=="add", KERNEL=="sd*", PROGRAM=="/sbin/scsi_id", RESULT=="360a98000686f6959684a453333524179", RUN+="/bin/raw /dev/raw/raw2 %N"
  

  If switch to RHEL5/OEL5 since an earlier version of Linux that has pressed persistent raw device bindings in the/etc/sysconfig/rawdevices file, the following script can serve as a basis to generate your RHEL5/OEL5 of the udev rules. Note that the script does not factor device name persistence.

  #!/bin/bash
  grep -v "^ *#" /etc/sysconfig/rawdevices | grep -v "^$" | while read dev major minor ; do
  if [ -z "$minor" ]; then
  echo "ACTION==\"add\", KERNEL==\"${major##/dev/}\", RUN+=\"/bin/raw $dev %N\""
  else
  echo "ACTION==\"add\", ENV{MAJOR}==\"$major\", ENV{MINOR}==\"$minor\", RUN+=\"/bin/raw $dev %M %m\""
  fi
  done
  

• How to open ebs oracle on RHEL Server Forms.

  Hello
  
  I installed R12.1.3 on RHEL 5. 6. I need to open the oracle e-Business Forms in the RHEL 5.6 Server. Please suggest me how to open the ebs forms in the server. Is it recommended to open the forms in linux server.
  
  Best regards
  Anil.

  What should I say to my client.

  It is not certified.

  Please do not ask the same question over and over again!

  Thank you
  Hussein

• need to connect and configure the oracle on windows 7 vmware professional database? Help, please?

  Hello

  In fact, I wanted to set up ORACLE with Informatica Power Center (ETL) database connection. But my problem is that I installed the oracle database with grid inside VMWARE with the RHEL operating system. But what INFORMATICA etl software is installed outside VMWARE, which is located in WINDOWS 7 Professional.

  I would like to know how I can access and configure oracle database of windows 7 Professional as oracle database is installed inside VMWARE RHEL 6.5 operating system.

  Help, please.

  HERE'S HOW I SOLVED IT: -.

  
  Here is the url for the NAT that could become useful for other institutions.

  How to Setup Port Forwarding in VMware Workstation 9 | Virten.NET

• Migrate from rhel 3 to rhel 4 ebs 11.5.10.2

  Dear all,

  I would like to migrate 11.5.10.2 ebs running on oracle 10.2.0.3 db rhel 3 OS--> rhel 4,.

  Is there a documentation I could quote to migrate this, I want to keep an ebs version & db, it would be just an operating system migration.

  Thank you

  Hello

  You can clone of rhel 3 to rhel 4. (I recommend to migrate to RHEL 5, so that you don't have to not repeat the migration to the latest version of the operating system that you are certified)

  Do it for a test instance, if all goes well, then you can migrate prod.

  See question No. 13 in

  FAQ: Cloning Oracle Applications Release 11i (Doc ID 216664.1)

  And for cloning

  Cloning Oracle Applications Release 11i with rapid Clone (Doc ID 230672.1)

  Thank you

• Oracle 12 c only client installation

  Hello

  I want to install Oracle 12 c client Runtime on RHEL 6 Server. I downloaded and ran the installation of the Oracle database software download package, but I have no option to install the right Client. Installation Options screen says 'create and configure a database' or 'Install database software only' or 'upgrade of an existing database.

  Is there another package to download for the facilities of customers? I need the client Runtime, not instant client.

  Thank you

  Robert

  The link that you posted, click the link 'See all' against Linux x 86-64 - scroll down and you will find the client you need to download and install the binary

  Oracle Database 12 c Release 1 for Linux x 86-64

  Oracle Database 12 c Release 1 for Linux x 86-64

• Using Oracle ODBC HS to Sybase get cursors exceeded max

  Oracle 11 g 2

  Linux RHEL 6.5

  -----------------------

  When you use Oracle ODBC HS to connect to Sybase via dblink SYB get the following error:

  ORA-01000: cursors open maximum exceeded

  ORA-02063: preceding line of SYB

  When you run the same SQL locally, getting no error.  (The same tables in Sybase are replicated in Oracle).

  Increased the max sliders and even restarted Oracle - no difference.  SQL on system tables do not show more than 250 sliders in use yet max cursors defined at 2500.

  This error above suggests a problem of cursor max with Sybase?  Or something else?

  It can also be a problem with the HS_OPEn_CURSORS. By default, the gateway allows only 50 open cursors will be open to the foreign database. What happens when you set in the gateway HS_OPEN_CURSORS init file = 200?

  If it fails again, could you upload to a public file share a gateway (HS_FDS_TRACE_LEVEL = DEBUG) DEBUG trace level?

  -Klaus

• Oracle 12 c on Ubuntu 11.10/12.04 or later

  Hello

  Can someone please provide the steps to installing oracle 12 c in ubuntu.

  Ubuntu is not the OS linux certified for the installation of the oracle database product. consider using linux RHEL, OEL.

• Oracle performance problem

  Oracle: 11.2 EE.
  OS: RHEL 5.x
  Storage: VNX SAN.
  
  We have tried to identify a problem of performance for our ETL process before going live.
  We use external tables with data extraction and loading pump.
  
  On server 1 (Dual Core QA)
  Our etl process runs 15% faster.
  
  On the server 2 (Quad Core Production)
  
  Our test includes the creation of a database in production and by running the etl process. We moved the Lun containing production data files for testing and using the same init.ora files, we have brought to the top of the database on server1. We find that server1 performs much faster than on server2.
  We even passed on the HBA from one server to another, to eliminate any problem of connectivity with the material. Even with that, we are at a time where server2 running slower than server 1.
  
  We have reduced to the following in the AWR report (do not know how to post the report as a whole). It seems that the readings are much faster on the server 1 Server 2.
  
  IOStat summary function
  

  Server 1
  Function    NameReads: Data   Reqs per sec   Data per sec   Writes: Data   Reqs per sec   Data per sec   Waits: Count   Avg Tm(ms)
  Data Pump   1.1T              759.83         162.614        118.6G         236.56         17.1264        7063.3K        0.10
  
  
  Server 2
  Function    NameReads: Data   Reqs per sec   Data per sec   Writes: Data   Reqs per sec   Data per sec   Waits: Count   Avg Tm(ms)
  Data Pump   1.1T              475.83         101/852        118.6G         141.41         10.7269        7065.1K        0.38

  I know there is not a lot of information here, but I hope someone might have experienced this in the past and has a solution.
  Any answer will appreciated.
  
  Thank you
  Div.
  
  Published by: div on 4 February 2013 07:25

  Hello

  I saw cela previously, where, from a CPU more fast speed of the slowest to the although it causes many, unique process threaded to operate more slowly. You do not have as much energy for this simple to use threaded process. Even if she was not maxing out the CPU before, it could be present on this single thread.

  It is not really the answer but if everyhting else is the same and I mean identical, then it must be the only change and, therefore, the culprit. In this case, you will need to parallelise the process.

  See you soon,.
  SoC

• Oracle XE TEMP tablespace issue

  Oracle XE 11 GR 2
  Linux RHEL 5.8
  -----------------------
  
  The following SQL code shows a TEMP tablespace exists:
  
  Select nom_tablespace in dba_tablespaces;
  
  TABLESPACE_NAME
  ------------------------------
  SYSTEM
  SYSAUX
  UNDOTBS1
  TEMP
  USERS
  APEX
  
  But what follows doesn't show any data files associated with the TEMP tablespace:
  
  Select nom_tablespace, file_name in dba_data_files;
  
  NOM_TABLESPACE FILENAME
  -----------------------------------------------------
  USERS /u01/app/oracle/oradata/XE/users.dbf
  
  SYSAUX /u01/app/oracle/oradata/XE/sysaux.dbf
  
  UNDOTBS1 /u01/app/oracle/oradata/XE/undotbs1.dbf
  
  SYSTEM /u01/app/oracle/oradata/XE/system.dbf
  
  APEX /u01/app/oracle/product/11.2.0/xe/dbs/APEX01.dbf
  
  What gives? I chose the default configuration of Oracle XE out-of-the box. If it's ok (?) where the sorting is done in Oracle XE?
  Thank you

  user601798 wrote:
  Oracle XE 11 GR 2
  Linux RHEL 5.8
  -----------------------

  The following SQL code shows a TEMP tablespace exists:

  Select nom_tablespace in dba_tablespaces;

  TABLESPACE_NAME
  ------------------------------
  SYSTEM
  SYSAUX
  UNDOTBS1
  TEMP
  USERS
  APEX

  But what follows doesn't show any data files associated with the TEMP tablespace:

  Select nom_tablespace, file_name in dba_data_files;

  NOM_TABLESPACE FILENAME
  -----------------------------------------------------
  USERS /u01/app/oracle/oradata/XE/users.dbf

  SYSAUX /u01/app/oracle/oradata/XE/sysaux.dbf

  UNDOTBS1 /u01/app/oracle/oradata/XE/undotbs1.dbf

  SYSTEM /u01/app/oracle/oradata/XE/system.dbf

  APEX /u01/app/oracle/product/11.2.0/xe/dbs/APEX01.dbf

  What gives? I chose the default configuration of Oracle XE out-of-the box. If it's ok (?) where the sorting is done in Oracle XE?
  Thank you

  Select nom_tablespace, file_name from dba_TEMP_files;

• OS RHEL update

  Hello
  
  Currently we are running Oracle 10.2.0.4.0 RHEL 4, 5.
  
  The application team wants to have the OS upgraded to RHEL 5.5.
  
  This affects the database? or what steps we must follow to Oracle database.
  
  
  Thank you

  Salvation;

  I also suggest review under notes and remember that your new server told RPM etc.

  Oracle database on Unix AIX, HP - UX, Linux, Mac OS X, Solaris, Tru64 Unix operating system Installation and Configuration requirements checklist (8.0.5 to 11.2) [ID 169706.1]
  Note to master of Linux OS requirements for the database server [ID 851598.1]

  PS: Please don't forget to change the status thread answer whether it is possible when believe you your thread replied, he pretend to wasting time in other forums users while they are looking outstanding which is not answered, thank you for understanding

  Respect of
  HELIOS

• Installing11gr2 DB with RHEl 5

  Hello world
  
  I'm new next to the database. Can someone tell me please exact hardware configuration for the installation of oracle 11 g 2 database with rhel 5?
  Thanks in advance,
  NISH

  I suggest you consult the documentation:

  http://docs.Oracle.com/CD/E11882_01/install.112/e24324/TOC.htm
  https://Linux.Oracle.com/documentation/OL5/Red_Hat_Enterprise_Linux-5-Installation_Guide-en-us.PDF

  Your easiest way will be to install Oracle Linux 5.8 (preferably x86_64), then configure yum public (http://public-yum.oracle.com) and install the package "oracle-validated" to automatically make all the installation requirements of database.

• RAC with Oracle VM and Windows Server

  Hi all,
  
  We want to implement the system with Oracle database 11g or 10g 64 bit (CARS) on the OS of Microsoft Server 2008/2003. We do not have enough licenses for all the hearts, and we want to find a way to implement the RAC database with existing licenses.
  
  Is this a good solution to use virtualization, as Oracle VM?
  How much is safe to use virtualization?
  Can we do Oracle Real Application Clusters (RAC) environments Oracle VM with Windows Server 2008 64-bit (or 2003 Server) operating system and use hard partition?
  Is it better to invest in licenses or try with Oracle VM?
  
  
  Oracle VM can be configured so that it is recognized as a difficult score.
  Hard partitions allow customers of one license these CPU used by the partition instead of license all the processors on the physical server.
  Source: oracle.com
  
  
  Thank you!

  Virtualization is not certified for Oracle RAC on Windows.

  + Software on Oracle VM [464754.1 ID] + notes States certified:

  Oracle Real Application Clusters (RAC)
  
      Oracle 10.2.0.4 and up (10gR2) and 11.1.0.7 and up (11gR1) and 11gR2 RAC for Linux x86 and Linux x86_64 certified on Oracle VM
          Guest OS: Oracle Linux 5.1 (and above) RHEL 5.1 (and above) for Linux x86 / Linux x86_64
          Paravirtualized (PV) mode only (Guest OS and drivers)
          Only supported on Oracle VM 2.1.2 and above
          Live-migration of an Oracle RAC VM is supported with Oracle VM 2.2.1 and above.
          Previous versions are not supported. Please refer to this link for best practices.
  
          Over-committing CPUs is not recommended, but supported with the following restrictions:
              The total amount of VCPUs allocated to guest domains (running Oracle RAC guests), should not exceed
              two times (2x) the amount of real CPUs / cores in the Oracle VM server.
              The amount of VCPUs allocated to a single guest domain should not exceed the amount of real CPUs /
              cores in the Oracle VM server.
              Maintain Oracle VMs default VCPU allocation for dom-0: Oracle VM will allocate 1 VCPU for each real CPU or core to dom-0.
              CPU pinning is only recommended for hard partitioning. If no hard partitioning is required, CPU pinning should not be used.
  
          Static support only (dynamic support is being planned):
              Dynamic resizing of guest virtual machine is not supported (VCPU, memory and I/O)
              Virtual Machine Pause/Restore of an active Real Application Cluster virtual machine is not supported.